Drawing → BOQ
← Mindmapwhat the drawings said

Alignment Boundary

5 pages · 14 crops · ×25 · other

Matched toBridge Axisbridge.alignment_system.bridge_axischeckon “Centerline”

0 of 1 required measurements have a number
The class asks forUnitA reading with that nameFrom
ChainageCHmno reading by that name
Alignment OffsetOFFoptionalm/mmno reading by that name

Paired on the measurement’s name only, which cannot know that three span lengths sum to the deck length. Step 3 works these out properly for every item it matches — reading every crop behind the item, deriving what the drawings imply and showing its arithmetic. This item has not had that pass yet; the button runs it for this one.

How the sheets named it

CenterlineCenterline (alignment)outer pocket frameouter boundaryinner boundaryinner boundary / recessouter boundary of enclosureOuter boundaryInner boundaryL-shaped notch/openinggrid interiorouter boundary frameinner opening boundaryinner recess / openingouter frame / boundarycenterlineinner frame openingouter frameinner pocket / recessouter plate / section boundary

Every dimension read for it14

  • 3'-0" ftoverall widthp13 · p13_r06 section a a
  • 3'-0" ft-inoverall widthp13 · p13_r07 section b b
  • 3'-0" ftoverall widthp13 · p13_r07
  • 5'-4 3/4" ftoverall widthp16 · p16_r13 detail 4
  • 3'-6" ft-inoverall widthp16 · p16_r15 section c c
  • 3'-6" ft-inoverall heightp16 · p16_r15 section c c
  • 3'-6" ft-inOverall widthp16 · p16_r15
  • 3'-6" ft-inOverall heightp16 · p16_r15
  • 3'-0" ftOverall widthnot attributedp17 · p17_r06
  • 1'-6" ftLeft spannot attributedp17 · p17_r06
  • 1'-6" ftRight spannot attributedp17 · p17_r06
  • 2-442Bolt hole pattern (2-4-2)not attributedp17 · p17_r06
  • 2" inMinimum centerline clearancenot attributedp17 · p17_r06
  • 1'-0" ftTyp. width (inside pocket)not attributedp17 · p17_r06

Notes on the sheets that carry it

  • p1NO SCALE
  • p7= CONSTRUCTION
  • p7= SYMMETRY
  • p17SECTION A-A
  • p17SCALE: 3/4" = 1'-0"
  • p17Section B-B cross-section with outer and inner boundaries and two bottom holes; shows vertical features and centerline reference.

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r05

page 1 · other_p01_r05
Original
p01_r05
{
  "view": "Detail",
  "objects": [
    {
      "name": "Track",
      "tag": "",
      "shape": "line",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Centerline",
      "tag": "",
      "shape": "dashed line",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall height",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "Left edge"
    },
    {
      "label": "Left to center dashed line",
      "value": "13'-0\"",
      "unit": "",
      "appliesTo": "From left edge to dashed centerline"
    },
    {
      "label": "Center dashed line to right edge",
      "value": "13'-0\"",
      "unit": "",
      "appliesTo": "From center dashed line to right edge"
    }
  ],
  "notes": [
    "NO SCALE"
  ],
  "labels": [
    "CONSTRUCTION CLEARANCE DIAGRAM",
    "TRACK",
    "TOP OF HIGH RAIL"
  ],
  "description": "This crop shows a construction clearance diagram with a 22'-0\" tall outer rectangle. It includes two 13'-0\" spans from the left edge to a central dashed line and from the center line to the right edge, and a label indicating TRACK on the right. A callout marks the TOP OF HIGH RAIL, and the sheet is marked NO SCALE."
}

p01_r05Detail

  • Centerline×1dashed line

22'-0" Overall height13'-0" Left to center dashed line13'-0" Center dashed line to right edge

Page 7

crop

p07_r02 c sr 21 millen bypass

page 7 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p07_r02_c_sr_21_millen_bypass
Original
p07_r02 c sr 21 millen bypass
{
  "view": "Notes",
  "objects": [
    {
      "name": "Centerline (alignment)",
      "tag": "",
      "shape": "dashed vertical line",
      "material": "",
      "count": 1,
      "note": "alignment/centerline"
    }
  ],
  "measurements": [],
  "notes": [
    "= CONSTRUCTION",
    "= SYMMETRY"
  ],
  "labels": [
    "SR 2I/MILLEN BYPASS"
  ],
  "description": "Crop shows a plan-level callout with a dashed centerline/alignment and two callouts indicating construction and symmetry for the SR 2I/MILLEN BYPASS."
}

p07_r02 c sr 21 millen bypassNotes

  • Centerline (alignment)×1dashed vertical linealignment/centerline

Page 13

crop

p13_r06 section a a

page 13 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p13_r06_section_a_a
Original
p13_r06 section a a
{
  "view": "Section",
  "objects": [
    {
      "name": "outer pocket frame",
      "tag": "",
      "shape": "rectangular with rounded corners",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolts",
      "tag": "",
      "shape": "circle",
      "material": "",
      "count": 4,
      "note": "bolts/fasteners at corners inside pocket"
    },
    {
      "name": "central post / sleeve",
      "tag": "",
      "shape": "rectangular/linear ledge inside center",
      "material": "",
      "count": 1,
      "note": "centerline element shown with dashed centerline"
    },
    {
      "name": "plate, identifier 4-1010",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "dimensioned element labeled 4-1010"
    },
    {
      "name": "bottom support / pedestal",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "lower protruding member under pocket"
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "ft",
      "appliesTo": "outer pocket frame"
    },
    {
      "label": "inner segment width (each side)",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "top inner segments"
    },
    {
      "label": "centerline to left edge",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "top/center area"
    },
    {
      "label": "centerline to right edge",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "top/center area"
    },
    {
      "label": "section scale",
      "value": "3/4\"",
      "unit": "in",
      "appliesTo": "figural scale note"
    },
    {
      "label": "min centerline clearance",
      "value": "2'",
      "unit": "ft",
      "appliesTo": "centerline clearance"
    },
    {
      "label": "min vertical clearance",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "vertical dimension on right"
    },
    {
      "label": "three-sides clearance",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "three sides"
    },
    {
      "label": "typical offset",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "typical section offset"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "Cross-section view Section A-A of a rectangular pocket/Frame with bolt pattern and centerline member. Shows overall width, inner segment spacing, and minimum clearances as depicted on Sheet page 13."
}

p13_r06 section a aSection

  • outer pocket frame×1rectangular with rounded corners

3'-0" ft overall width1'-6" ft inner segment width (each side)1'-6" ft centerline to left edge1'-6" ft centerline to right edge3/4" in section scale2' ft min centerline clearance2'-0" ft min vertical clearance2" in three-sides clearance+1 more

crop

p13_r07 section b b

page 13 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p13_r07_section_b_b
Original
p13_r07 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "corner bolts",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "conduit holes",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "minimum centerline clearance",
      "value": "2\"",
      "unit": "MIN.",
      "appliesTo": "top clearance"
    },
    {
      "label": "minimum height",
      "value": "2'-0\"",
      "unit": "MIN.",
      "appliesTo": "vertical clearance"
    },
    {
      "label": "typical spacing",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "vertical spacing"
    },
    {
      "label": "left/right spacing",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "bottom width segments"
    },
    {
      "label": "left/right spacing (end)",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "bottom width segments"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "drawing scale"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "2\" CL. 3 SIDES"
  ],
  "description": "This crop shows a Section B-B cross-section of an enclosure with an outer boundary and an inner recessed opening, four corner bolts, and two bottom circular openings. It includes dimension notes for overall width, minimum clearances, typical spacing, and bottom side clearances, with a scale of 3/4\" = 1'-0\"."
}

p13_r07 section b bSection

  • outer boundary×1rectangular
  • inner boundary×1rectangular

3'-0" ft-in overall width2" MIN. minimum centerline clearance2'-0" MIN. minimum height1'-0" typical spacing1'-6" left/right spacing1'-6" left/right spacing (end)3/4" = 1'-0" scale

crop

p13_r07

page 13 · other_p13_r07
Original
p13_r07
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary of enclosure",
      "tag": "",
      "shape": "rounded rectangle",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner boundary / recess",
      "tag": "",
      "shape": "rounded rectangle",
      "material": "",
      "count": 1,
      "note": "inner boundary of enclosure"
    },
    {
      "name": "top bolt holes",
      "tag": "",
      "shape": "circle",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "bottom holes",
      "tag": "2-415 SERIES",
      "shape": "circle",
      "material": "",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "ft",
      "appliesTo": "outer boundary"
    },
    {
      "label": "centerline offset (left)",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "centerline to left edge"
    },
    {
      "label": "centerline offset (right)",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "centerline to right edge"
    },
    {
      "label": "top clearance (min. CL.)",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "top area"
    },
    {
      "label": "vertical clearance (min.)",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "right side"
    },
    {
      "label": "internal typ. spacing",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "internal feature spacing"
    },
    {
      "label": "clearance on three sides",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "three sides"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "B.F"
  ],
  "description": "Cross-section through a rectangular enclosure with an inner recess and two topside bolt holes, showing centerline, clearances, and a pair of bottom holes labeled as 2-415 SERIES."
}

p13_r07Section

  • outer boundary of enclosure×1rounded rectangle
  • inner boundary / recess×1rounded rectangleinner boundary of enclosure

3'-0" ft overall width1'-6" ft centerline offset (left)1'-6" ft centerline offset (right)2" in top clearance (min. CL.)2'-0" ft vertical clearance (min.)1'-0" ft internal typ. spacing2" in clearance on three sides

Page 16

crop

p16_r06 section c c

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r06_section_c_c
Original
p16_r06 section c c
{
  "view": "Section",
  "objects": [
    {
      "name": "Outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "Inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "Reinforcement bars",
      "tag": "",
      "shape": "circular",
      "material": "steel (reinforcement bars)",
      "count": null,
      "note": "dots along interior/left side"
    },
    {
      "name": "Callout tag",
      "tag": "510B",
      "shape": "annotation",
      "material": "text",
      "count": null,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "",
      "value": "1'-0\"",
      "unit": "ft-in",
      "appliesTo": "Outer boundary width"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION C-C"
  ],
  "description": "Section C-C cross-section showing a double rectangular boundary with an inner void and a set of circular reinforcement bars along the interior. A callout labeled 510B is present near the lower portion, and a top width dimension of 1'-0\" is indicated."
}

p16_r06 section c cSection

  • Outer boundary×1rectangularunknown
  • Inner boundary×1rectangularunknown

1'-0" ft-in

crop

p16_r07 detail 2

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r07_detail_2
Original
p16_r07 detail 2
{
  "view": "Detail",
  "objects": [
    {
      "name": "slab boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "outer boundary of the detail area"
    },
    {
      "name": "reinforcement grid",
      "tag": "",
      "shape": "grid",
      "material": "reinforced concrete",
      "count": 1,
      "note": "rectangular lattice of reinforcing bars"
    },
    {
      "name": "L-shaped notch/opening",
      "tag": "",
      "shape": "L-shaped opening",
      "material": "reinforced concrete",
      "count": 1,
      "note": "inner cutout in the slab"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "slab boundary"
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL 2",
    "B",
    "C"
  ],
  "description": "Detail view of a reinforced concrete slab showing a rectangular outer boundary, an interior reinforcement grid, and an L-shaped notch/opening in the lower portion. It is labeled DETAIL 2 with section callouts B and C."
}

p16_r07 detail 2Detail

  • L-shaped notch/opening×1L-shaped openingreinforced concreteinner cutout in the slab

5'-4 3/4" ft-in Overall width

crop

p16_r13 detail 4

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r13_detail_4
Original
p16_r13 detail 4
{
  "view": "Detail",
  "objects": [
    {
      "name": "outer boundary frame",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "detail boundary (frame)"
    },
    {
      "name": "grid interior",
      "tag": "",
      "shape": "rectangular grid",
      "material": "",
      "count": 1,
      "note": "internal grid lines forming equal squares"
    },
    {
      "name": "notch recess",
      "tag": "",
      "shape": "notch",
      "material": "",
      "count": 1,
      "note": "re-entrant notch in lower interior area"
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "5'-4 3/4\"",
      "unit": "ft",
      "appliesTo": "outer boundary frame"
    }
  ],
  "notes": [],
  "labels": [
    "5-540A",
    "4-540B",
    "5-443A",
    "3-443B",
    "DETAIL 4"
  ],
  "description": "Detail view for Detail 4 showing a rectangular frame with an internal grid and a bottom-left notch. The overall width is 5'-4 3/4\". Callouts 5-540A, 4-540B, 5-443A, and 3-443B appear in the detail."
}

p16_r13 detail 4Detail

  • outer boundary frame×1rectangulardetail boundary (frame)
  • grid interior×1rectangular gridinternal grid lines forming equal squares

5'-4 3/4" ft overall width

crop

p16_r15 section c c

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r15_section_c_c
Original
p16_r15 section c c
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "diagonal reinforcement bars",
      "tag": "",
      "shape": "diagonal lines",
      "material": "reinforced steel",
      "count": 2,
      "note": "two bars crossing inside opening"
    },
    {
      "name": "boltholes / anchor bolt holes",
      "tag": "",
      "shape": "circular",
      "material": "concrete/steel",
      "count": 12,
      "note": "pattern around interior perimeter"
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "overall height",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "clearance all around",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "inner boundary opening"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION C-C"
  ],
  "description": "Section view (C-C) of a square 3'-6\" x 3'-6\" concrete element showing an inner opening with 2\" clearances on all sides, diagonal reinforcement within the opening, and a bolt-hole pattern (12 holes) around the interior perimeter."
}

p16_r15 section c cSection

  • outer boundary×1rectangularreinforced concrete
  • inner boundary×1rectangularreinforced concrete

3'-6" ft-in overall width3'-6" ft-in overall height2" in clearance all around

crop

p16_r15

page 16 · other_p16_r15
Original
p16_r15
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner opening boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "anchor bolts",
      "tag": "",
      "shape": "circular",
      "material": "steel",
      "count": null,
      "note": ""
    },
    {
      "name": "reinforcing bars",
      "tag": "",
      "shape": "diagonal",
      "material": "steel rebar",
      "count": null,
      "note": ""
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "concrete",
      "count": null,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "Overall height",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "Clearance all around",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "opening boundary to outer boundary"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION C-C",
    "12-1121 OR 1131",
    "2\" CL. ALL SIDES",
    "620 OR 630",
    "621 OR 631"
  ],
  "description": "Detail view of a square opening with an inner boundary inset from the outer frame. The pattern shows anchor bolts around the inner edge with diagonal reinforcement bars between bolts and a circular hole location on the right. Dimensional callouts indicate a 3'-6\" width and height with 2\" clearance on all sides, and the section is labeled SECTION C-C."
}

p16_r15Section

  • outer boundary×1rectangularconcrete
  • inner opening boundary×1rectangularconcrete

3'-6" ft-in Overall width3'-6" ft-in Overall height2" in Clearance all around

Page 17

crop

p17_r06 section a a

page 17 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p17_r06_section_a_a
Original
p17_r06 section a a
{
  "view": "Section",
  "objects": [
    {
      "name": "outer frame / boundary",
      "tag": "",
      "shape": "rounded rectangle",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolts or anchor holes",
      "tag": "",
      "shape": "circle",
      "material": "",
      "count": 4,
      "note": "at inner corners"
    },
    {
      "name": "top brace / bracket",
      "tag": "",
      "shape": "trapezoid",
      "material": "",
      "count": 1,
      "note": "top member labeled 2-442"
    },
    {
      "name": "centerline post / shaft",
      "tag": "",
      "shape": "rectangular column",
      "material": "",
      "count": 1,
      "note": "centerline axis"
    },
    {
      "name": "bottom legs (2)",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "support for center post"
    },
    {
      "name": "inner recess / opening",
      "tag": "",
      "shape": "rectangle",
      "material": "",
      "count": 1,
      "note": "inner opening within outer frame"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Outer frame width"
    },
    {
      "label": "Left/right half width (each)",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "From outer edge to centerline"
    },
    {
      "label": "Bottom left/right half width",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "Bottom distance from centerline"
    },
    {
      "label": "Minimum vertical clearance",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "Right side vertical clearance"
    },
    {
      "label": "Typical vertical spacing",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "Vertical spacing inside section"
    }
  ],
  "notes": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\"",
    "3 SIDES",
    "2\" CL."
  ],
  "description": "Section A-A view of a rectangular frame with an interior centerline post and four corner bolts. The dimensions show a 3'-0\" overall width with 1'-6\" side segments and a downward central element; notes indicate a minimum centerline clearance and typical spacing."
}

p17_r06 section a aSection

  • outer frame / boundary×1rounded rectangle
  • inner recess / opening×1rectangleinner opening within outer frame

3'-0" ft-in Overall width1'-6" ft-in Left/right half width (each)1'-6" ft-in Bottom left/right half width2'-0" ft Minimum vertical clearance1'-0" ft Typical vertical spacing

crop

p17_r07 section b b

page 17 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p17_r07_section_b_b
Original
p17_r07 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "outer frame",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner frame opening",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolt holes (top row)",
      "tag": "",
      "shape": "circular",
      "material": "unknown",
      "count": 4,
      "note": "holes along top inner edge"
    },
    {
      "name": "bolt holes (bottom row)",
      "tag": "",
      "shape": "circular",
      "material": "unknown",
      "count": 2,
      "note": "two holes for 2-445 SERIES"
    },
    {
      "name": "support braces",
      "tag": "",
      "shape": "diagonal brace",
      "material": "unknown",
      "count": 2,
      "note": "triangular braces from bottom holes toward center"
    },
    {
      "name": "centerline",
      "tag": "",
      "shape": "dashed line",
      "material": "unknown",
      "count": 1,
      "note": "centerline reference"
    }
  ],
  "measurements": [
    {
      "label": "outer width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "outer frame width"
    },
    {
      "label": "left segment to centerline",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "horizontal distance to centerline"
    },
    {
      "label": "right segment to centerline",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "horizontal distance to centerline"
    },
    {
      "label": "clear sides",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "sides clear"
    },
    {
      "label": "vertical clearance min",
      "value": "2'-0\"",
      "unit": "ft-in",
      "appliesTo": "vertical minimum clearance"
    },
    {
      "label": "centerline vertical clearance min",
      "value": "2'-0\"",
      "unit": "ft-in",
      "appliesTo": "vertical minimum clearance to centerline"
    },
    {
      "label": "inner opening width",
      "value": "4-1040",
      "unit": "",
      "appliesTo": "inner opening width"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B"
  ],
  "description": "Section B-B through a rectangular frame with an inner opening. The drawing shows an outer frame, an inner frame opening, six bolt holes (top row of four and bottom row of two for the 2-445 series), two diagonal support braces, and a centerline reference. Distances indicate 3'-0\" overall width, 1'-6\" left and right to the centerline, 2\" clear sides on three sides, and minimum vertical clearances of 2'-0\"."
}

p17_r07 section b bSection

  • outer frame×1rectangularunknown
  • inner frame opening×1rectangularunknown
  • centerline×1dashed lineunknowncenterline reference

3'-0" ft-in outer width1'-6" ft-in left segment to centerline1'-6" ft-in right segment to centerline2" in clear sides2'-0" ft-in vertical clearance min2'-0" ft-in centerline vertical clearance min4-1040 inner opening width

crop

p17_r06

page 17 · other_p17_r06
Original
p17_r06
{
  "view": "Section",
  "objects": [
    {
      "name": "outer plate / section boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner pocket / recess",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "central post",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "3'-0\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Left span",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Right span",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Bolt hole pattern (2-4-2)",
      "value": "2-442",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Minimum centerline clearance",
      "value": "2\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "Typ. width (inside pocket)",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": ""
    }
  ],
  "notes": [],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "Cross-section A-A of a member showing an outer rectangular plate with an inner recess, four corner holes, and a central vertical post extending downward. Includes notes on centerline clearance and minimum clearance to sides."
}

p17_r06Section

  • outer plate / section boundary×1rectangular
  • inner pocket / recess×1rectangular

3'-0" ft Overall width1'-6" ft Left span1'-6" ft Right span2-442 Bolt hole pattern (2-4-2)2" in Minimum centerline clearance1'-0" ft Typ. width (inside pocket)

crop

p17_r07

page 17 · other_p17_r07
Original
p17_r07
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "outer boundary of the section"
    },
    {
      "name": "inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "inner opening/frame"
    },
    {
      "name": "bolt/anchor holes",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "two circular holes near bottom"
    }
  ],
  "measurements": [
    {
      "label": "overall width (top)",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "outer boundary top width"
    },
    {
      "label": "bottom left offset",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "left bottom to centerline"
    },
    {
      "label": "bottom right offset",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "right bottom to centerline"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION B-B"
    }
  ],
  "notes": [
    "Section B-B cross-section with outer and inner boundaries and two bottom holes; shows vertical features and centerline reference."
  ],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "2-442",
    "4-1040",
    "2-445 SERIES"
  ],
  "description": "Cross-section view B-B of a concrete feature showing an outer boundary and an inner opening, with two bottom circular holes and supporting elements. Key dimensions visible include 3'-0\" overall width and 1'-6\" offsets from the centerline; scale is 3/4\" = 1'-0\"."
}

p17_r07Section

  • outer boundary×1rectangularconcreteouter boundary of the section
  • inner boundary×1rectangularconcreteinner opening/frame

3'-0" overall width (top)1'-6" bottom left offset1'-6" bottom right offset3/4" = 1'-0" scale