Drawing → BOQ
← Mindmapwhat the drawings said

Anchor Bolt

3 pages · 6 crops · ×21 · other

Matched toAnchor Boltbridge.superstructure.connection_system.anchor_bolton “anchor bolts”

0 of 4 required measurements have a number
The class asks forUnitA reading with that nameFrom
Instance CountNcountno reading by that name
DiameterDm/mmno reading by that name
LengthLm/mmno reading by that name
Steel Gradefy—no reading by that name

Paired on the measurement’s name only, which cannot know that three span lengths sum to the deck length. Step 3 works these out properly for every item it matches — reading every crop behind the item, deriving what the drawings imply and showing its arithmetic. This item has not had that pass yet; the button runs it for this one.

How the sheets named it

4-35l AT EACH WAYbolted connection hardwareboltscorner boltsperimeter anchor bolts

Every dimension read for it3

  • 1 in1" CL.not attributedp10 · p10_r04
  • 3 in3"not attributedp10 · p10_r04
  • 5 in5" DIA.not attributedp10 · p10_r04

Notes on the sheets that carry it

  • p10CUT OFF EXCESS DIAPHRAGM BAR 1" FROM BEAM FACE.
  • p16Section A-A
  • p16BRNG. callouts appear near left and right edges

Every crop it was read in — the drawing beside what the model took off it

Page 10

crop

p10_r04 dia

page 10 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p10_r04_dia
Original
p10_r04 dia
{
  "view": "Detail",
  "objects": [
    {
      "name": "2\" DIAMETER HOLE",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "4-35l AT EACH WAY",
      "tag": "",
      "shape": "bolts",
      "material": "steel",
      "count": 4,
      "note": ""
    },
    {
      "name": "DIAPHRAGM BAR",
      "tag": "",
      "shape": "bar",
      "material": "reinforcement steel",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "2\" DIAMETER HOLE",
      "value": "2",
      "unit": "in",
      "appliesTo": "hole"
    },
    {
      "label": "DIA.",
      "value": "5",
      "unit": "in",
      "appliesTo": "diaphragm/bar feature"
    },
    {
      "label": "FROM BEAM FACE",
      "value": "1",
      "unit": "in",
      "appliesTo": "diaphragm bar"
    }
  ],
  "notes": [
    "CUT OFF EXCESS DIAPHRAGM BAR 1\" FROM BEAM FACE."
  ],
  "labels": [
    "2\" DIAMETER HOLE",
    "4-35l AT EACH WAY",
    "5\" DIA."
  ],
  "description": "Detail showing a diaphragm-bar bolt assembly with a 2\" diameter hole and a diaphragm bar to be cut off 1\" from the beam face; a 5\" diameter feature is also annotated."
}

p10_r04 diaDetail

  • 4-35l AT EACH WAY×4boltssteel

2 in 2" DIAMETER HOLE5 in DIA.1 in FROM BEAM FACE

crop

p10_r04

page 10 · other_p10_r04
Original
p10_r04
{
  "view": "Detail",
  "objects": [
    {
      "name": "diaphragm bar",
      "tag": "",
      "shape": "rectangular",
      "material": "likely steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "2\" diameter hole",
      "tag": "",
      "shape": "circular",
      "material": "hole through plate",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolted connection hardware",
      "tag": "",
      "shape": "cylindrical",
      "material": "steel",
      "count": 1,
      "note": "bolt/nut/washer assembly visible"
    }
  ],
  "measurements": [
    {
      "label": "1\" CL.",
      "value": "1",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "3\"",
      "value": "3",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "5\" DIA.",
      "value": "5",
      "unit": "in",
      "appliesTo": ""
    }
  ],
  "notes": [
    "CUT OFF EXCESS DIAPHRAGM BAR 1\" FROM BEAM FACE."
  ],
  "labels": [
    "2\" DIAMETER HOLE"
  ],
  "description": "Detail of a diaphragm-bar assembly showing a 2-inch diameter hole, a diaphragm bar with a 1-inch clearance from the beam face, and related centerline/diameter dimensions."
}

p10_r04Detail

  • bolted connection hardware×1cylindricalsteelbolt/nut/washer assembly visible

1 in 1" CL.3 in 3"5 in 5" DIA.

Page 13

crop

p13_r06 section a a

page 13 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p13_r06_section_a_a
Original
p13_r06 section a a
{
  "view": "Section",
  "objects": [
    {
      "name": "outer pocket frame",
      "tag": "",
      "shape": "rectangular with rounded corners",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolts",
      "tag": "",
      "shape": "circle",
      "material": "",
      "count": 4,
      "note": "bolts/fasteners at corners inside pocket"
    },
    {
      "name": "central post / sleeve",
      "tag": "",
      "shape": "rectangular/linear ledge inside center",
      "material": "",
      "count": 1,
      "note": "centerline element shown with dashed centerline"
    },
    {
      "name": "plate, identifier 4-1010",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "dimensioned element labeled 4-1010"
    },
    {
      "name": "bottom support / pedestal",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "lower protruding member under pocket"
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "ft",
      "appliesTo": "outer pocket frame"
    },
    {
      "label": "inner segment width (each side)",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "top inner segments"
    },
    {
      "label": "centerline to left edge",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "top/center area"
    },
    {
      "label": "centerline to right edge",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "top/center area"
    },
    {
      "label": "section scale",
      "value": "3/4\"",
      "unit": "in",
      "appliesTo": "figural scale note"
    },
    {
      "label": "min centerline clearance",
      "value": "2'",
      "unit": "ft",
      "appliesTo": "centerline clearance"
    },
    {
      "label": "min vertical clearance",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "vertical dimension on right"
    },
    {
      "label": "three-sides clearance",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "three sides"
    },
    {
      "label": "typical offset",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "typical section offset"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "Cross-section view Section A-A of a rectangular pocket/Frame with bolt pattern and centerline member. Shows overall width, inner segment spacing, and minimum clearances as depicted on Sheet page 13."
}

p13_r06 section a aSection

  • bolts×4circlebolts/fasteners at corners inside pocket

3'-0" ft overall width1'-6" ft inner segment width (each side)1'-6" ft centerline to left edge1'-6" ft centerline to right edge3/4" in section scale2' ft min centerline clearance2'-0" ft min vertical clearance2" in three-sides clearance+1 more

crop

p13_r07 section b b

page 13 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p13_r07_section_b_b
Original
p13_r07 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "corner bolts",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "conduit holes",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "minimum centerline clearance",
      "value": "2\"",
      "unit": "MIN.",
      "appliesTo": "top clearance"
    },
    {
      "label": "minimum height",
      "value": "2'-0\"",
      "unit": "MIN.",
      "appliesTo": "vertical clearance"
    },
    {
      "label": "typical spacing",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "vertical spacing"
    },
    {
      "label": "left/right spacing",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "bottom width segments"
    },
    {
      "label": "left/right spacing (end)",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "bottom width segments"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "drawing scale"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "2\" CL. 3 SIDES"
  ],
  "description": "This crop shows a Section B-B cross-section of an enclosure with an outer boundary and an inner recessed opening, four corner bolts, and two bottom circular openings. It includes dimension notes for overall width, minimum clearances, typical spacing, and bottom side clearances, with a scale of 3/4\" = 1'-0\"."
}

p13_r07 section b bSection

  • corner bolts×4circular

3'-0" ft-in overall width2" MIN. minimum centerline clearance2'-0" MIN. minimum height1'-0" typical spacing1'-6" left/right spacing1'-6" left/right spacing (end)3/4" = 1'-0" scale

Page 16

crop

p16_r05 at eq sps

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r05_at_eq_sps
Original
p16_r05 at eq sps
{
  "view": "Detail",
  "objects": [
    {
      "name": "bolts",
      "tag": "",
      "shape": "circular",
      "material": "unknown",
      "count": 8,
      "note": "pattern of circular holes along inner face of vertical member"
    }
  ],
  "measurements": [
    {
      "label": "Width",
      "value": "1'-0\"",
      "unit": "ft-in",
      "appliesTo": "bolts pattern / inner face"
    }
  ],
  "notes": [],
  "labels": [
    "AT EA. SPs.",
    "5-3A EA. FACE"
  ],
  "description": "Detail showing a vertical member with a 1'-0\" width opening at the top. There is a vertical sequence of circular holes along the inner face and a bottom feature with an angled annotation. The right-side text appears to be face-related notes."
}

p16_r05 at eq spsDetail

  • bolts×8circularunknownpattern of circular holes along inner face of vertical member

1'-0" ft-in Width

crop

p16_r01

page 16 · other_p16_r01
Original
p16_r01
{
  "view": "Section",
  "objects": [
    {
      "name": "outer concrete enclosure",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner concrete pocket",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "perimeter anchor bolts",
      "tag": "",
      "shape": "circular",
      "material": "steel anchor bolts",
      "count": null,
      "note": "bolts around base and along sides"
    }
  ],
  "measurements": [
    {
      "label": "4'-0\" MIN.",
      "value": "4'-0\"",
      "unit": "ft",
      "appliesTo": "Left outer height"
    },
    {
      "label": "4'-3\"",
      "value": "4'-3\"",
      "unit": "ft",
      "appliesTo": "Overall top width"
    },
    {
      "label": "2'-1/2\"",
      "value": "2'-1/2\"",
      "unit": "ft",
      "appliesTo": "Top spacing left and right"
    },
    {
      "label": "1'-2\"",
      "value": "1'-2\"",
      "unit": "ft",
      "appliesTo": "Inner segment spacing"
    },
    {
      "label": "2\" MIN CL., TYP.",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "Clearance (typical)"
    },
    {
      "label": "2\" CL., 3 SIDES",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "Sides (perimeter clearance)"
    }
  ],
  "notes": [
    "Section A-A",
    "BRNG. callouts appear near left and right edges"
  ],
  "labels": [
    "SECTION A-A",
    "BRNG."
  ],
  "description": "This crop shows a Section A-A through a rectangular reinforced concrete enclosure with an interior pocket. It highlights a perimeter bolt pattern along the base, inner pocket geometry, and specified minimum clearances and dimensions that define the overall outline and assembly tolerances."
}

p16_r01Section

  • perimeter anchor boltscircularsteel anchor boltsbolts around base and along sides

4'-0" ft 4'-0" MIN.4'-3" ft 4'-3"2'-1/2" ft 2'-1/2"1'-2" ft 1'-2"2" in 2" MIN CL., TYP.2" in 2" CL., 3 SIDES