Drawing → BOQ
← Mindmapwhat the drawings said

Footing

4 pages · 17 crops · ×27 · foundation

Matched toSpread Footingbridge.foundation_system.shallow_foundation.spread_footingon “Footing”

2 of 6 required measurements have a number
The class asks forUnitA reading with that nameFrom
LengthLm/mmno reading by that name
WidthWm/mm13'-0" ft-inp16 · p16_r02 footing plan bent 3
HeightHm/mm11'-6" ft-inp16 · p16_r08 footing plan bent 2
Instance CountNcountno reading by that name
Concrete Gradefck—no reading by that name
Founding LevelFLmno reading by that name

Paired on the measurement’s name only, which cannot know that three span lengths sum to the deck length. Step 3 works these out properly for every item it matches — reading every crop behind the item, deriving what the drawings imply and showing its arithmetic. This item has not had that pass yet; the button runs it for this one.

How the sheets named it

Footing / PedestalColumn footingFoundation/base - reinforced concrete padBase footingFooting 1Footing 2FOOTING 1FOOTING 2FOOTING 3FOOTING 4Footing 3Footing 4

Every dimension read for it5

  • 13'-0" ft-inFooting width (Bent 3)p16 · p16_r02 footing plan bent 3
  • 11'-6" ft-inOverall widthp16 · p16_r08 footing plan bent 2
  • 1'-3" ft-inRight offset to boundaryp16 · p16_r08 footing plan bent 2
  • 11'-6" ft-inOverall heightp16 · p16_r08 footing plan bent 2
  • 1'-3" ft-inBottom offset to boundaryp16 · p16_r08 footing plan bent 2

Notes on the sheets that carry it

  • p11DIMENSIONS ALONG BEAM
  • p11INDICATES 1/2" DIAMETER PRESTRESSED STRANDS.
  • p11MAINTAIN 1" MINIMUM CLEARANCE UNLESS OTHERWISE SHOWN.
  • p14ELEVATION (BENT 2 RIGHT LOOKING AHEAD)
  • p16"2" MIN. CL., TYP."
  • p16"5-4220 OR EACH FACE"
  • p16SECTION B-B
  • p16SCALE: 3/8" = 1'-0"
  • p18Bottom of footing elevation is labeled with an arrow callout.

Every crop it was read in — the drawing beside what the model took off it

Page 11

crop

p11_r02 section at end

page 11 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p11_r02_section_at_end
Original
p11_r02 section at end
{
  "view": "Section",
  "objects": [
    {
      "name": "Footing / Pedestal",
      "tag": "",
      "shape": "irregular polygon",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Prestressed strands",
      "tag": "",
      "shape": "circular (dots along line)",
      "material": "steel",
      "count": null,
      "note": "pattern indicates 1/2 inch diameter prestressed strands"
    },
    {
      "name": "Central stem / tendon duct",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Perforated base region",
      "tag": "",
      "shape": "irregular polygon with perforations",
      "material": "reinforced concrete",
      "count": 1,
      "note": "dotted area representing perforations / voids in base"
    }
  ],
  "measurements": [
    {
      "label": "Top left horizontal dimension",
      "value": "1'-4\"",
      "unit": "ft-in",
      "appliesTo": "Section at midpoint (top dimension)"
    },
    {
      "label": "Interior vertical dimension",
      "value": "550",
      "unit": "",
      "appliesTo": "Section at midpoint interior vertical"
    },
    {
      "label": "Interior spacing",
      "value": "7\"",
      "unit": "in",
      "appliesTo": "Section at midpoint interior spacing"
    },
    {
      "label": "Bottom width spacing",
      "value": "9 SPACES AT 2\"",
      "unit": "",
      "appliesTo": "Bottom width spacing"
    },
    {
      "label": "Overall bottom width",
      "value": "1'-10\"",
      "unit": "ft-in",
      "appliesTo": "Bottom width overall"
    },
    {
      "label": "Right section height",
      "value": "2'-7\"",
      "unit": "ft-in",
      "appliesTo": "Section at end height"
    }
  ],
  "notes": [
    "DIMENSIONS ALONG BEAM",
    "INDICATES 1/2\" DIAMETER PRESTRESSED STRANDS.",
    "MAINTAIN 1\" MINIMUM CLEARANCE UNLESS OTHERWISE SHOWN."
  ],
  "labels": [
    "SECTION AT MIDPOINT",
    "SECTION AT END"
  ],
  "description": "Cross-section views (Section at midpoint and Section at end) from Sheet page 11 showing a reinforced concrete footing/pedestal with a vertical central tendon duct and prestressed strands, including a perforated base area and surrounding wing-like sections."
}

p11_r02 section at endSection

  • Footing / Pedestal×1irregular polygonreinforced concrete

1'-4" ft-in Top left horizontal dimension550 Interior vertical dimension7" in Interior spacing9 SPACES AT 2" Bottom width spacing1'-10" ft-in Overall bottom width2'-7" ft-in Right section height

Page 14

crop

p14_r03

page 14 · other_p14_r03
Original
p14_r03
{
  "view": "Elevation",
  "objects": [
    {
      "name": "Column",
      "tag": "COLUMN 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Pier/column"
    },
    {
      "name": "Column",
      "tag": "COLUMN 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Pier/column"
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column footing",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "footings beneath columns"
    }
  ],
  "measurements": [
    {
      "label": "Span",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "Between COLUMN 3 and COLUMN 4"
    },
    {
      "label": "Min vertical clearance",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "Right edge"
    },
    {
      "label": "EL. 186.42 (BK)",
      "value": "186.42",
      "unit": "",
      "appliesTo": "Top deck left"
    },
    {
      "label": "EL. 185.75 (AH)",
      "value": "185.75",
      "unit": "",
      "appliesTo": "Top deck near center"
    },
    {
      "label": "EL. 181.84",
      "value": "181.84",
      "unit": "",
      "appliesTo": "Left column base elevation"
    }
  ],
  "notes": [
    "ELEVATION (BENT 2 RIGHT LOOKING AHEAD)"
  ],
  "labels": [
    "BRIDGE NO. 1 LT. AND RT."
  ],
  "description": "Elevation view showing the deck resting on two columns (COLUMN 3 and COLUMN 4) with associated footing and deck slab details."
}

p14_r03Elevation

  • Column footing×2rectangularreinforced concretefootings beneath columns

25'-0" Span4'-0" Min vertical clearance186.42 EL. 186.42 (BK)185.75 EL. 185.75 (AH)181.84 EL. 181.84

Page 16

crop

p16_r01 section a a

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r01_section_a_a
Original
p16_r01 section a a
{
  "view": "Section",
  "objects": [
    {
      "name": "Foundation/base - reinforced concrete pad",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Anchor bolts",
      "tag": "",
      "shape": "circular",
      "material": "steel",
      "count": null,
      "note": "perimeter anchors around the base (visible as circular bolts)"
    },
    {
      "name": "Bent",
      "tag": "BENT",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "dimension line indicates section through a bent member"
    },
    {
      "name": "Reinforcement/bolts along interior perimeter",
      "tag": "",
      "shape": "points along edge",
      "material": "reinforcing steel",
      "count": null,
      "note": "represented by evenly spaced dots along the inner/perimeter edges"
    }
  ],
  "measurements": [
    {
      "label": "TOTAL_WIDTH_TOP",
      "value": "4'-3\"",
      "unit": "ft-in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "CENTER_SPAN_LEFT",
      "value": "2'-1/2\"",
      "unit": "ft-in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "CENTER_SPAN_RIGHT",
      "value": "2'-1/2\"",
      "unit": "ft-in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "TOP_DIMENSION_SPLIT",
      "value": "11 1/2\"",
      "unit": "in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "MIN_CLEARANCE_HORIZ",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "MIN_CL_LEFT",
      "value": "4'-0\"",
      "unit": "ft-in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "EDGE_COLUMN_SPACING",
      "value": "9\"",
      "unit": "in",
      "appliesTo": "Section A-A"
    }
  ],
  "notes": [
    "\"2\" MIN. CL., TYP.\"",
    "\"5-4220 OR EACH FACE\""
  ],
  "labels": [
    "SECTION A-A"
  ],
  "description": "Cross-section detail labeled SECTION A-A showing a reinforced concrete base with perimeter anchor bolts and a bent member, plus spacing and minimum clearance dimensions."
}

p16_r01 section a aSection

  • Foundation/base - reinforced concrete pad×1rectangularreinforced concrete

4'-3" ft-in TOTAL_WIDTH_TOP2'-1/2" ft-in CENTER_SPAN_LEFT2'-1/2" ft-in CENTER_SPAN_RIGHT11 1/2" in TOP_DIMENSION_SPLIT2" in MIN_CLEARANCE_HORIZ4'-0" ft-in MIN_CL_LEFT9" in EDGE_COLUMN_SPACING

crop

p16_r02 footing plan bent 3

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r02_footing_plan_bent_3
Original
p16_r02 footing plan bent 3
{
  "view": "Plan",
  "objects": [
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "outer boundary of Bent 3 footing"
    },
    {
      "name": "Anchor bolts",
      "tag": "",
      "shape": "circle",
      "material": "steel",
      "count": null,
      "note": "perimeter/around footing (circles indicate bolts)"
    },
    {
      "name": "Column location",
      "tag": "COLUMN",
      "shape": "dashed line",
      "material": "",
      "count": null,
      "note": "location of column above Bent 3, shown as dashed centerline"
    }
  ],
  "measurements": [
    {
      "label": "Footing width (Bent 3)",
      "value": "13'-0\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    }
  ],
  "notes": [
    "SECTION B-B",
    "SCALE: 3/8\" = 1'-0\""
  ],
  "labels": [
    "FOOTING PLAN - BENT 3"
  ],
  "description": "Plan view of the Bent 3 footing showing the outer rectangular footing outline with anchor bolts around the perimeter and the column location line (COLUMN) indicating where the column sits on the footing. A section callout B-B is shown, with the drawing scale noted."
}

p16_r02 footing plan bent 3Plan

  • Footing×1rectangularconcreteouter boundary of Bent 3 footing

13'-0" ft-in Footing width (Bent 3)

crop

p16_r03 detail 1

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r03_detail_1
Original
p16_r03 detail 1
{
  "view": "Detail",
  "objects": [
    {
      "name": "Panel with grid",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Panel with internal grid pattern."
    },
    {
      "name": "Post with bolt holes",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Vertical member with multiple circular holes."
    },
    {
      "name": "Base footing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Bottom base block supporting the post (visible in Section A-A)."
    }
  ],
  "measurements": [
    {
      "label": "3'-0 7/16\"",
      "value": "3'-0 7/16\"",
      "unit": "",
      "appliesTo": "Panel width"
    },
    {
      "label": "1'-0\"",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "Post width"
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL I",
    "SECTION A-A"
  ],
  "description": "Detail view showing a rectangular grid-panel and a vertical post with bolt-holes; includes a section view labeled A-A."
}

p16_r03 detail 1Detail

  • Base footing×1rectangularBottom base block supporting the post (visible in Section A-A).

3'-0 7/16" 3'-0 7/16"1'-0" 1'-0"

crop

p16_r08 footing plan bent 2

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r08_footing_plan_bent_2
Original
p16_r08 footing plan bent 2
{
  "view": "Plan",
  "objects": [
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "",
      "shape": "centerline",
      "material": "",
      "count": 1,
      "note": "centerline of footing (column alignment)"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "line",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "11'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    },
    {
      "label": "Left offset to interior line",
      "value": "1'-3\"",
      "unit": "ft-in",
      "appliesTo": "Footing (top width)"
    },
    {
      "label": "Top width segment 1",
      "value": "4'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing (top)"
    },
    {
      "label": "Top width segment 2",
      "value": "4'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing (top)"
    },
    {
      "label": "Right offset to boundary",
      "value": "1'-3\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    },
    {
      "label": "Overall height",
      "value": "11'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    },
    {
      "label": "Left height segment 1",
      "value": "4'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing (left)"
    },
    {
      "label": "Left height segment 2",
      "value": "4'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing (left)"
    },
    {
      "label": "Bottom offset to boundary",
      "value": "1'-3\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    }
  ],
  "notes": [],
  "labels": [
    "FOOTING PLAN - BENT 2",
    "SCALE: 3/8\" = 1'-0\"",
    "COLUMN",
    "PILE",
    "BENT 2"
  ],
  "description": "Plan view of Footing Plan for Bent 2 showing an outer rectangular footing with interior column alignment and a pile callout. Dimensional notes indicate overall width and height with interior spacings."
}

p16_r08 footing plan bent 2Plan

  • Footing×1rectangularconcrete

11'-6" ft-in Overall width1'-3" ft-in Left offset to interior line4'-6" ft-in Top width segment 14'-6" ft-in Top width segment 21'-3" ft-in Right offset to boundary11'-6" ft-in Overall height4'-6" ft-in Left height segment 14'-6" ft-in Left height segment 2+1 more

crop

p16_r02

page 16 · other_p16_r02
Original
p16_r02
{
  "view": "Plan",
  "objects": [
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "outer footing outline for Bent 3"
    },
    {
      "name": "Bent",
      "tag": "BENT 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "located at left side of footing"
    },
    {
      "name": "Bent",
      "tag": "BENT 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "located at right side of footing"
    },
    {
      "name": "Column",
      "tag": "",
      "shape": "circular",
      "material": "concrete",
      "count": 1,
      "note": "centerline/column location within footing"
    }
  ],
  "measurements": [
    {
      "label": "4'-3\"",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "top width / overall plan width"
    },
    {
      "label": "2'-1/2\"",
      "value": "2'-1/2\"",
      "unit": "",
      "appliesTo": "dimension between features near top"
    },
    {
      "label": "1'-2\"",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "dimension between features near top"
    },
    {
      "label": "4'-0\" MIN.",
      "value": "4'-0\" MIN.",
      "unit": "",
      "appliesTo": "minimum clearance"
    },
    {
      "label": "9\"",
      "value": "9\"",
      "unit": "",
      "appliesTo": "vertical dimension"
    },
    {
      "label": "13'-0\"",
      "value": "13'-0\"",
      "unit": "",
      "appliesTo": "overall plan width (Bent 3 footing)"
    },
    {
      "label": "5'-3\"",
      "value": "5'-3\"",
      "unit": "",
      "appliesTo": "segmented width inside plan"
    },
    {
      "label": "1'-3\"",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "segment width ends"
    },
    {
      "label": "SCALE",
      "value": "3/8\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Footing Plan - Bent 3"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "FOOTING PLAN - BENT 3",
    "C COLUMN",
    "BENT 2",
    "BENT 3"
  ],
  "description": "Plan view of the footing for Bent 3 (Footing Plan - Bent 3) showing the outer footing outline, the location of Bent 2 and Bent 3, and the central column, with the associated dimensions and scale."
}

p16_r02Plan

  • Footing×1rectangularreinforced concreteouter footing outline for Bent 3

4'-3" 4'-3"2'-1/2" 2'-1/2"1'-2" 1'-2"4'-0" MIN. 4'-0" MIN.9" 9"13'-0" 13'-0"5'-3" 5'-3"1'-3" 1'-3"+1 more

crop

p16_r08

page 16 · other_p16_r08
Original
p16_r08
{
  "view": "Plan",
  "objects": [
    {
      "name": "PILE",
      "tag": "",
      "shape": "line",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BENT 2",
      "tag": "",
      "shape": "rectangle",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "FOOTING",
      "tag": "",
      "shape": "rectangle",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "COLUMN",
      "tag": "",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "11'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "top width"
    },
    {
      "label": "1'-3\"",
      "value": "",
      "unit": "",
      "appliesTo": "top offset left"
    },
    {
      "label": "4'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "top interior segment 1"
    },
    {
      "label": "4'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "top interior segment 2"
    },
    {
      "label": "1'-3\"",
      "value": "",
      "unit": "",
      "appliesTo": "top offset right"
    },
    {
      "label": "11'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "left height"
    },
    {
      "label": "4'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "left subdivision 1"
    },
    {
      "label": "4'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "left subdivision 2"
    },
    {
      "label": "1'-3\"",
      "value": "",
      "unit": "",
      "appliesTo": "bottom left offset"
    },
    {
      "label": "SCALE: 3/8\" = 1'-0\"",
      "value": "",
      "unit": "",
      "appliesTo": "caption"
    }
  ],
  "notes": [],
  "labels": [
    "FOOTING PLAN - BENT 2",
    "SCALE: 3/8\" = 1' - 0\""
  ],
  "description": "Plan view of Bent 2 footing showing the footing outline, central column axis, and pile location; includes callouts and dimension lines on the top and left sides with overall dimensions and offsets."
}

p16_r08Plan

  • FOOTING×1rectangleconcrete

11'-6" 1'-3" 4'-6" 4'-6" 1'-3" 11'-6" 4'-6" 4'-6"+2 more

Page 18

crop

p18_r01 footing 3

page 18 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p18_r01_footing_3
Original
p18_r01 footing 3
{
  "view": "Detail",
  "objects": [
    {
      "name": "Bent",
      "tag": "BENT 1 LEFT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 2 LEFT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 3 LEFT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 4 LEFT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 1 RIGHT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 2 RIGHT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 3 RIGHT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 4 RIGHT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [],
  "notes": [],
  "labels": [],
  "description": "Detail crop of sheet page 18 showing the bent arrangements for BENT 1–4 on both left and right sides, with associated footings. The image focuses on individual bent elements rather than long-range plan features."
}

p18_r01 footing 3Detail

  • FootingFOOTING 1×1rectangularreinforced concrete
  • FootingFOOTING 2×1rectangularreinforced concrete
  • FootingFOOTING 3×1rectangularreinforced concrete
  • FootingFOOTING 4×1rectangularreinforced concrete
crop

p18_r02 footing elevation

page 18 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p18_r02_footing_elevation
Original
p18_r02 footing elevation
{
  "view": "Detail",
  "objects": [
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Reinforcement bars",
      "tag": "",
      "shape": "dashed lines",
      "material": "",
      "count": 1,
      "note": "stirrups/rebar depicted inside left portion"
    }
  ],
  "measurements": [],
  "notes": [
    "Bottom of footing elevation is labeled with an arrow callout."
  ],
  "labels": [
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Detail crop showing a footing with a bottom-of-footing-elevation callout. The main rectangular block represents the footing with a small reinforcement arrangement indicated by dashed lines."
}

p18_r02 footing elevationDetail

  • Footing×1rectangular
crop

p18_r03 footing 3

page 18 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p18_r03_footing_3
Original
p18_r03 footing 3
{
  "view": "Table",
  "objects": [
    {
      "name": "Bent",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "3 RIGHT"
    },
    {
      "name": "Footing",
      "tag": "Footing 3",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "Footing 4",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 12,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "PILE NO.",
      "value": "1",
      "unit": "",
      "appliesTo": "Pile 1"
    },
    {
      "label": "PILE NO.",
      "value": "2",
      "unit": "",
      "appliesTo": "Pile 2"
    },
    {
      "label": "PILE NO.",
      "value": "3",
      "unit": "",
      "appliesTo": "Pile 3"
    },
    {
      "label": "PILE NO.",
      "value": "4",
      "unit": "",
      "appliesTo": "Pile 4"
    },
    {
      "label": "PILE NO.",
      "value": "5",
      "unit": "",
      "appliesTo": "Pile 5"
    },
    {
      "label": "PILE NO.",
      "value": "6",
      "unit": "",
      "appliesTo": "Pile 6"
    },
    {
      "label": "PILE NO.",
      "value": "7",
      "unit": "",
      "appliesTo": "Pile 7"
    },
    {
      "label": "PILE NO.",
      "value": "8",
      "unit": "",
      "appliesTo": "Pile 8"
    },
    {
      "label": "PILE NO.",
      "value": "9",
      "unit": "",
      "appliesTo": "Pile 9"
    },
    {
      "label": "PILE NO.",
      "value": "10",
      "unit": "",
      "appliesTo": "Pile 10"
    },
    {
      "label": "PILE NO.",
      "value": "11",
      "unit": "",
      "appliesTo": "Pile 11"
    },
    {
      "label": "PILE NO.",
      "value": "12",
      "unit": "",
      "appliesTo": "Pile 12"
    }
  ],
  "notes": [],
  "labels": [
    "Sheet page 18",
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Table from Sheet page 18 showing Bent 3 Right, Footing 3 and Footing 4 groups with Pile Nos. 1–12. Tip elevations and bottom footing elevations are not provided in this crop."
}

p18_r03 footing 3Table

  • FootingFooting 3×1rectangular
  • FootingFooting 4×1rectangular

1 PILE NO.2 PILE NO.3 PILE NO.4 PILE NO.5 PILE NO.6 PILE NO.7 PILE NO.8 PILE NO.+4 more

crop

p18_r09 footing 1

page 18 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p18_r09_footing_1
Original
p18_r09 footing 1
{
  "view": "Table",
  "objects": [
    {
      "name": "Bent",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "3 LEFT"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 12,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "FOOTING 1 and FOOTING 2 in PILE LOCATION"
    }
  ],
  "measurements": [
    {
      "label": "PILE NO.",
      "value": "1",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "2",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "3",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "4",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "5",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "6",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "7",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "8",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "9",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "10",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "11",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "12",
      "unit": "",
      "appliesTo": "Pile"
    }
  ],
  "notes": [],
  "labels": [
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Table shows Bent 3 Left with two footings and a pile list numbered 1 through 12. Pile tip elevation and bottom of footing elevation fields appear unfilled in this crop."
}

p18_r09 footing 1Table

  • Footing×2FOOTING 1 and FOOTING 2 in PILE LOCATION

1 PILE NO.2 PILE NO.3 PILE NO.4 PILE NO.5 PILE NO.6 PILE NO.7 PILE NO.8 PILE NO.+4 more

crop

p18_r01

page 18 · other_p18_r01
Original
p18_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent 1 Left",
      "tag": "BENT 1 LEFT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 1",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 2",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 3",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 4",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 5",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam",
      "tag": "BEAM 6",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent 2 Left",
      "tag": "BENT 2 LEFT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing 1",
      "tag": "FOOTING 1",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing 2",
      "tag": "FOOTING 2",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent 3 Left",
      "tag": "BENT 3 LEFT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent 4 Left",
      "tag": "BENT 4 LEFT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent 4 Right",
      "tag": "BENT 4 RIGHT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent 2 Right",
      "tag": "BENT 2 RIGHT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent 3 Right",
      "tag": "BENT 3 RIGHT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent 7 Right",
      "tag": "BENT 7 RIGHT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [],
  "notes": [],
  "labels": [],
  "description": "Plan-view fragment showing multiple bent frames (Bent 1 Left, Bent 2 Left, Bent 3 Left, Bent 4 Left, and corresponding right-side bents Bent 2 Right, Bent 3 Right, Bent 4 Right, Bent 7 Right). Each bent is depicted with a rectangular footing area and associated beams labeled BEAM 1–6 in the left portion, and footing callouts FOOTING 1–2 nearby."
}

p18_r01Plan

  • Footing 1FOOTING 1×1rectangular
  • Footing 2FOOTING 2×1rectangular
crop

p18_r02

page 18 · other_p18_r02
Original
p18_r02
{
  "view": "Detail",
  "objects": [
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Dowel bars",
      "tag": "",
      "shape": "circular",
      "material": "steel reinforcement",
      "count": 2,
      "note": "dowels/dowel bars at footing edge"
    }
  ],
  "measurements": [],
  "notes": [],
  "labels": [
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Detail view of a footing showing a bottom-of-footing-elevation callout and two reinforcement bars (dowels) at the footing edge."
}

p18_r02Detail

  • Footing×1rectangularreinforced concrete
crop

p18_r03

page 18 · other_p18_r03
Original
p18_r03
{
  "view": "Table",
  "objects": [
    {
      "name": "Bent",
      "tag": "3 RIGHT",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 3",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 4",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 12,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "PILE NO.",
      "value": "1",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "2",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "3",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "4",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "5",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "6",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "7",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "8",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "9",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "10",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "11",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "12",
      "unit": "",
      "appliesTo": "Pile"
    }
  ],
  "notes": [],
  "labels": [
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Table showing pile layout for Bent 3 Right with two footings (FOOTING 3 and FOOTING 4). Pile numbers 1-12 are listed under the corresponding footing locations; Pile Tip Elevation and Bottom of Footing Elevation columns are present but not populated in this crop."
}

p18_r03Table

  • FootingFOOTING 3×1
  • FootingFOOTING 4×1

1 PILE NO.2 PILE NO.3 PILE NO.4 PILE NO.5 PILE NO.6 PILE NO.7 PILE NO.8 PILE NO.+4 more

crop

p18_r07

page 18 · other_p18_r07
Original
p18_r07
{
  "view": "Table",
  "objects": [
    {
      "name": "Footing 1",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing 2",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": 12,
      "note": ""
    }
  ],
  "measurements": [],
  "notes": [],
  "labels": [
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BOTTOM OF FOOTING ELEVATION",
    "FOOTING 1",
    "FOOTING 2"
  ],
  "description": "Crop of sheet page 18 showing a table for pile locations. It lists two footings (Footing 1 and Footing 2) with pile numbers 1–12; columns exist for pile tip elevation and bottom of footing elevation, but no elevation values are shown in this crop."
}

p18_r07Table

  • Footing 1×1rectangularreinforced concrete
  • Footing 2×1rectangularreinforced concrete
crop

p18_r09

page 18 · other_p18_r09
Original
p18_r09
{
  "view": "Table",
  "objects": [
    {
      "name": "Bent",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Bent 3 Left"
    },
    {
      "name": "Footing 1",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing 2",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 12,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "PILE NO.",
      "value": "1",
      "unit": "",
      "appliesTo": "Pile 1"
    },
    {
      "label": "PILE NO.",
      "value": "2",
      "unit": "",
      "appliesTo": "Pile 2"
    },
    {
      "label": "PILE NO.",
      "value": "3",
      "unit": "",
      "appliesTo": "Pile 3"
    },
    {
      "label": "PILE NO.",
      "value": "4",
      "unit": "",
      "appliesTo": "Pile 4"
    },
    {
      "label": "PILE NO.",
      "value": "5",
      "unit": "",
      "appliesTo": "Pile 5"
    },
    {
      "label": "PILE NO.",
      "value": "6",
      "unit": "",
      "appliesTo": "Pile 6"
    },
    {
      "label": "PILE NO.",
      "value": "7",
      "unit": "",
      "appliesTo": "Pile 7"
    },
    {
      "label": "PILE NO.",
      "value": "8",
      "unit": "",
      "appliesTo": "Pile 8"
    },
    {
      "label": "PILE NO.",
      "value": "9",
      "unit": "",
      "appliesTo": "Pile 9"
    },
    {
      "label": "PILE NO.",
      "value": "10",
      "unit": "",
      "appliesTo": "Pile 10"
    },
    {
      "label": "PILE NO.",
      "value": "11",
      "unit": "",
      "appliesTo": "Pile 11"
    },
    {
      "label": "PILE NO.",
      "value": "12",
      "unit": "",
      "appliesTo": "Pile 12"
    }
  ],
  "notes": [],
  "labels": [
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Table showing bent, footing locations (Footing 1 and Footing 2), and a spread of 12 piles numbered 1 through 12. Pile tip elevations and bottom of footing elevations are not filled in on this crop."
}

p18_r09Table

  • Footing 1×1
  • Footing 2×1

1 PILE NO.2 PILE NO.3 PILE NO.4 PILE NO.5 PILE NO.6 PILE NO.7 PILE NO.8 PILE NO.+4 more