Drawing → BOQ
← Mindmapwhat the drawings said

Hole

8 pages · 23 crops · ×52 · other

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a formed hole or penetration class.

How the sheets named it

Diaphragm bar hole2" DIAMETER HOLEØ 2" diameter hole for diaphragm bar2" diameter holeBearing pad holeconduit holesbolt holesbottom holestop bolt holesHOLE FOR DOWELHOLE FOR DOWEL BARboltholes / anchor bolt holesbolts or anchor holesbolt holes (bottom row)bolt holes (top row)bolt/anchor holes4-Ø102-415 SERIESFORM 3 DIA. X 12" DEEP HOLE FOR 1 1/2" DIA. SMOOTH DOWEL BAR, TYP.

Every dimension read for it54

  • 55'-0" ftSPAN LENGTHnot attributedp10 · p10_r01 notes
  • 53'-7 5/8" ftBEAM LENGTHnot attributedp10 · p10_r01 notes
  • 3 SPACES AT 24"3 SPACES AT 24"not attributedp10 · p10_r01 notes
  • 18 SPACES AT 12"18 SPACES AT 12"not attributedp10 · p10_r01 notes
  • 2-550 AT EACH LOCATION2-550 AT EACH LOCATIONnot attributedp10 · p10_r01 notes
  • 2-4502-450not attributedp10 · p10_r01 notes
  • 2-65 AT EACH LOCATION2-65 AT EACH LOCATIONnot attributedp10 · p10_r01 notes
  • 10-350 AT 6"10-350 AT 6"not attributedp10 · p10_r01 notes
  • 8-418-41not attributedp10 · p10_r01 notes
  • 2 SPACES AT 2"2 SPACES AT 2"not attributedp10 · p10_r01 notes
  • 2 in2" DIAMETER HOLEp10 · p10_r04 dia
  • 1 3/4" inhole_diameternot attributedp10 · p10_r07 notes
  • 7" inhole_depthnot attributedp10 · p10_r07 notes
  • 4" inslot_lengthnot attributedp10 · p10_r07 notes
  • 1 3/4" inslot_widthnot attributedp10 · p10_r07 notes
  • 7" inslot_depthnot attributedp10 · p10_r07 notes
  • 1/2" indowel_diameternot attributedp10 · p10_r07 notes
  • 2 inHOLE Øp10 · p10_r01
  • 1 in1" CL.not attributedp10 · p10_r04
  • 3 in3"not attributedp10 · p10_r04
  • 5 in5" DIA.not attributedp10 · p10_r04
  • 82'-0" ft-inSPAN LENGTHnot attributedp11 · p11_r01 notes
  • 80'-11 5/8" ft-inBEAM LENGTHnot attributedp11 · p11_r01 notes
  • 40'-5 13/16" ft-in40'-5 13/16"not attributedp11 · p11_r01 notes
  • 11 13/16" in11 13/16"not attributedp11 · p11_r01 notes
  • 2-5502-550 AT EACH LOCATIONnot attributedp11 · p11_r01 notes
  • 2-6502-650 AT EACH LOCATIONnot attributedp11 · p11_r01 notes
  • 2-4502-450not attributedp11 · p11_r01 notes
  • 13-350 AT 6"13-350 AT 6"not attributedp11 · p11_r01 notes
  • 2 1/2" in2 1/2"not attributedp11 · p11_r01 notes
  • 3 SPACES AT 2"3 SPACES AT 2"not attributedp11 · p11_r01 notes
  • 1 in1" CL.not attributedp11 · p11_r04 recess detail for diaphragm bar ends
  • 3 in3"not attributedp11 · p11_r04 recess detail for diaphragm bar ends
  • 2 in2" DIAMETER HOLEp11 · p11_r04 recess detail for diaphragm bar ends
  • 5 in5" DIA.not attributedp11 · p11_r04 recess detail for diaphragm bar ends
  • 1 3/4 inhole diameter (fixed ends)p11 · p11_r07 notes
  • 7 inhole depthp11 · p11_r07 notes
  • 1" in1" CL.not attributedp11 · p11_r04
  • 3" in3"not attributedp11 · p11_r04
  • 4" in4" EACH WAYnot attributedp11 · p11_r04
  • 5" in5" DIAnot attributedp11 · p11_r04
  • 2" in2" DIAMETER HOLEp11 · p11_r04
  • 3 inBearing pad hole diameterp12 · p12_r03 section a a
  • 2-4 1/2"hole pattern center to edge spacingp13 · p13_r06
  • 42'-6"PLAN LEFT LENGTHnot attributedp14 · p14_r01
  • 42'-6"PLAN RIGHT LENGTHnot attributedp14 · p14_r01
  • 42'-6"TOTAL PLAN LENGTH LEFTnot attributedp14 · p14_r01
  • 42'-6"TOTAL PLAN LENGTH RIGHTnot attributedp14 · p14_r01
  • 3'-0" ftOverall widthnot attributedp17 · p17_r06
  • 1'-6" ftLeft spannot attributedp17 · p17_r06
  • 1'-6" ftRight spannot attributedp17 · p17_r06
  • 2-442Bolt hole pattern (2-4-2)not attributedp17 · p17_r06
  • 2" inMinimum centerline clearancenot attributedp17 · p17_r06
  • 1'-0" ftTyp. width (inside pocket)not attributedp17 · p17_r06

Notes on the sheets that carry it

  • p10ΔNC = 1/2"
  • p10ΔC = 1/16"
  • p10Ø 2" DIAMETER HOLE FOR DIAPHRAGM BAR
  • p10OMIT HOLE AT BEAMS 6 AND 12
  • p106 - DRAPED STRANDS
  • p10LOW FRICTION TYPE HOLD DOWN
  • p10ALL DIMENSIONS ARE ALONG BEAM
  • p10CUT OFF EXCESS DIAPHRAGM BAR 1" FROM BEAM FACE.
  • p104. AT C BEARING, FORM A 1 3/4" DIAMETER X 7" DEEP HOLE AT THE FIXED ENDS AND A 4" X 1 3/4" X 7" DEEP SLOT AT THE EXPANSION ENDS FOR A 1/2" DIAMETER SMOOTH DOWEL. SEE PLAN AND ELEVATION SHEET FOR LOCATION OF FIXED AND EXPANSION ENDS.
  • p10MIDPOINT, DETAILS SYMMETRICAL ABOUT MIDPOINT UNLESS NOTED
  • p10ALL DIMENSIONS ARE ALONG C BEAM
  • p11OMIT HOLE AT BEAMS 1 AND 7
  • p11ALL DIMENSIONS ARE ALONG CL BEAM
  • p11DIAPHRAGM BAR SHALL BE A 1" DIAMETER PLAIN BAR, THREADED 5" ON EACH END, WITH 1/4" X 3/2" DIAMETER WASHERS AND HEX NUTS (ASTM A 709 GRADE 36).
  • p11TIGHTEN DIAPHRAGM BAR AS PER SUB-SECTION 507.3.05.C OF THE GEORGIA DOT SPECIFICATIONS.
  • p11AFTER EXCESS DIAPHRAGM BAR HAS BEEN CUT OFF, PAINT DIAPHRAGM BAR, WASHER, AND NUT EXPOSED IN RECESS WITH SPECIAL PROTECTIVE COATING NO.2 P AS PER SECTION 535 OF THE GEORGIA DOT SPECIFICATIONS. AFTER PAINTING, FILL THE RECESS WITH AN APPROVED EPOXY GROUT.
  • p11GALVANIZING OF THE DIAPHRAGM BAR AS PER SUB-SECTION 865.2.01.B.12 OF THE GEORGIA DOT SPECIFICATIONS IS NOT REQUIRED.
  • p11RECESS DETAIL FOR DIAPHRAGM BAR ENDS
  • p114. AT ⊥ BEARING, FORM A 1 3/4" DIAMETER X 7" DEEP HOLE AT THE FIXED ENDS AND A 4" X 1 3/4" X 7" DEEP SLOT AT THE EXPANSION ENDS FOR A 1 1/2" DIAMETER SMOOTH DOWEL. SEE PLAN AND ELEVATION SHEET FOR LOCATION OF FIXED AND EXPANSION ENDS.
  • p116. ALL HOLES FORMED INTO THE BEAMS TO FACILITATE TRANSPORT SHALL BE FILLED AND GIVEN A TYPE I FINISH, PRIOR TO ACCEPTANCE OF THE BEAM. REMOVE PVC OR SIMILAR FORMING MATERIALS FROM EACH HOLE, EXPOSING THE CONCRETE SURFACE. COAT INTERIOR OF HOLE WITH A TYPE II EPOXY RESIN ADHESIVE IN ACCORDANCE WITH GEORGIA STANDARD SPECIFICATION 886 AND FILL WITH A RAPID SETTING PATCHING MATERIAL IN ACCORDANCE WITH GEORGIA STANDARD SPECIFICATION 934.
  • p11DIAPHRAGM BAR SHALL BE A 1" DIAMETER PLAIN BAR, THREADED 5" ON EACH END, WITH ¼" X 3/2" DIAMETER WASHERS AND HEX NUTS (ASTM A 709 GRADE 36).
  • p1290°-00'-00", TYP.
  • p123/16" SEALING RIB, ALL AROUND
  • p13Section A-A shows a cross sectional view of a base plate with four bolt holes Ø10 and a central vertical member; three-sided clearance is indicated.
  • p14FORM 3" DIA. X 12" DEEP HOLE FOR 1/2" DIA. SMOOTH DOWEL BAR, TYP.
  • p15FORM 3 DIA. X 12" DEEP HOLE FOR 1 1/2" DIA. SMOOTH DOWEL BAR, TYP.
  • p17SECTION A-A
  • p17SCALE: 3/4" = 1'-0"
  • p17Section B-B cross-section with outer and inner boundaries and two bottom holes; shows vertical features and centerline reference.

Every crop it was read in — the drawing beside what the model took off it

Page 10

crop

p10_r01 notes

page 10 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p10_r01_notes
Original
p10_r01 notes
{
  "view": "Elevation",
  "objects": [
    {
      "name": "Beam",
      "tag": "",
      "shape": "rectangular",
      "material": "post-tensioned concrete",
      "count": 1,
      "note": "Main elevational member"
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "bearing pad",
      "count": 1,
      "note": "Left end bearing"
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "bearing pad",
      "count": 1,
      "note": "Right end bearing (C BEARING)"
    },
    {
      "name": "Diaphragm bar hole",
      "tag": "",
      "shape": "circle",
      "material": "hole in beam",
      "count": 1,
      "note": "Ø 2\" diameter hole for diaphragm bar"
    },
    {
      "name": "Draped strands",
      "tag": "",
      "shape": "lines",
      "material": "post-tension tendons",
      "count": 6,
      "note": "6 - draped strands"
    },
    {
      "name": "Low friction hold down",
      "tag": "",
      "shape": "block",
      "material": "hold-down device",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "SPAN LENGTH",
      "value": "55'-0\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "BEAM LENGTH",
      "value": "53'-7 5/8\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "26'-9 3/16\"",
      "value": "26'-9 3/16\"",
      "unit": "ft",
      "appliesTo": "midpoint dimension"
    },
    {
      "label": "9 3/16\"",
      "value": "9 3/16\"",
      "unit": "in",
      "appliesTo": "midpoint dimension"
    },
    {
      "label": "3 SPACES AT 24\"",
      "value": "3 SPACES AT 24\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "6\"",
      "value": "6\"",
      "unit": "in",
      "appliesTo": "spacing"
    },
    {
      "label": "18 SPACES AT 12\"",
      "value": "18 SPACES AT 12\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "2-550 AT EACH LOCATION",
      "value": "2-550 AT EACH LOCATION",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "2-450",
      "value": "2-450",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "2-65 AT EACH LOCATION",
      "value": "2-65 AT EACH LOCATION",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "10-350 AT 6\"",
      "value": "10-350 AT 6\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "8-41",
      "value": "8-41",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "2 SPACES AT 2\"",
      "value": "2 SPACES AT 2\"",
      "unit": "",
      "appliesTo": ""
    }
  ],
  "notes": [
    "ΔNC = 1/2\"",
    "ΔC = 1/16\"",
    "Ø 2\" DIAMETER HOLE FOR DIAPHRAGM BAR",
    "OMIT HOLE AT BEAMS 6 AND 12",
    "6 - DRAPED STRANDS",
    "LOW FRICTION TYPE HOLD DOWN",
    "ALL DIMENSIONS ARE ALONG BEAM"
  ],
  "labels": [
    "NOTES",
    "ELEVATION",
    "SECTION A",
    "SPAN LENGTH = 55'-0\"",
    "BEAM LENGTH = 53'-7 5/8\""
  ],
  "description": "Elevation view of a long post-tensioned beam with end bearings, diaphragm holes, and draped strands. The crop includes notes about hole diameters, hold-downs, and spacing, along with primary dimensional data (span and beam lengths) and internal spacing references."
}

p10_r01 notesElevation

  • Diaphragm bar hole×1circlehole in beamØ 2" diameter hole for diaphragm bar

55'-0" ft SPAN LENGTH53'-7 5/8" ft BEAM LENGTH26'-9 3/16" ft 26'-9 3/16"9 3/16" in 9 3/16"3 SPACES AT 24" 3 SPACES AT 24"6" in 6"18 SPACES AT 12" 18 SPACES AT 12"2-550 AT EACH LOCATION 2-550 AT EACH LOCATION+5 more

crop

p10_r04 dia

page 10 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p10_r04_dia
Original
p10_r04 dia
{
  "view": "Detail",
  "objects": [
    {
      "name": "2\" DIAMETER HOLE",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "4-35l AT EACH WAY",
      "tag": "",
      "shape": "bolts",
      "material": "steel",
      "count": 4,
      "note": ""
    },
    {
      "name": "DIAPHRAGM BAR",
      "tag": "",
      "shape": "bar",
      "material": "reinforcement steel",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "2\" DIAMETER HOLE",
      "value": "2",
      "unit": "in",
      "appliesTo": "hole"
    },
    {
      "label": "DIA.",
      "value": "5",
      "unit": "in",
      "appliesTo": "diaphragm/bar feature"
    },
    {
      "label": "FROM BEAM FACE",
      "value": "1",
      "unit": "in",
      "appliesTo": "diaphragm bar"
    }
  ],
  "notes": [
    "CUT OFF EXCESS DIAPHRAGM BAR 1\" FROM BEAM FACE."
  ],
  "labels": [
    "2\" DIAMETER HOLE",
    "4-35l AT EACH WAY",
    "5\" DIA."
  ],
  "description": "Detail showing a diaphragm-bar bolt assembly with a 2\" diameter hole and a diaphragm bar to be cut off 1\" from the beam face; a 5\" diameter feature is also annotated."
}

p10_r04 diaDetail

  • 2" DIAMETER HOLE×1circular

2 in 2" DIAMETER HOLE5 in DIA.1 in FROM BEAM FACE

crop

p10_r07 notes

page 10 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p10_r07_notes
Original
p10_r07 notes
{
  "view": "Notes",
  "objects": [
    {
      "name": "bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "bearing at fixed ends"
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "1 3/4\" diameter hole; 7\" deep"
    },
    {
      "name": "slot",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "4\" x 1 3/4\" x 7\" deep slot at expansion ends"
    },
    {
      "name": "dowel",
      "tag": "",
      "shape": "cylindrical",
      "material": "",
      "count": 1,
      "note": "1/2\" diameter smooth dowel"
    }
  ],
  "measurements": [
    {
      "label": "hole_diameter",
      "value": "1 3/4\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "hole_depth",
      "value": "7\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "slot_length",
      "value": "4\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "slot_width",
      "value": "1 3/4\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "slot_depth",
      "value": "7\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "dowel_diameter",
      "value": "1/2\"",
      "unit": "in",
      "appliesTo": ""
    }
  ],
  "notes": [
    "4. AT C BEARING, FORM A 1 3/4\" DIAMETER X 7\" DEEP HOLE AT THE FIXED ENDS AND A 4\" X 1 3/4\" X 7\" DEEP SLOT AT THE EXPANSION ENDS FOR A 1/2\" DIAMETER SMOOTH DOWEL. SEE PLAN AND ELEVATION SHEET FOR LOCATION OF FIXED AND EXPANSION ENDS."
  ],
  "labels": [],
  "description": "Note describing hole, slot, and dowel details for fixed and expansion ends referenced to plan/elevation sheets."
}

p10_r07 notesNotes

  • hole×1circular1 3/4" diameter hole; 7" deep

1 3/4" in hole_diameter7" in hole_depth4" in slot_length1 3/4" in slot_width7" in slot_depth1/2" in dowel_diameter

crop

p10_r01

page 10 · other_p10_r01
Original
p10_r01
{
  "view": "Elevation",
  "objects": [
    {
      "name": "PSC beam",
      "tag": "",
      "shape": "rectangular",
      "material": "prestressed concrete",
      "count": 1,
      "note": "main beam shown in elevation with internal tendons"
    },
    {
      "name": "Draped strands",
      "tag": "",
      "shape": "line",
      "material": "steel (prestressing strands)",
      "count": 6,
      "note": "6 - draped strands"
    },
    {
      "name": "Ø 2\" diameter hole for diaphragm bar",
      "tag": "",
      "shape": "circular",
      "material": "hole",
      "count": 2,
      "note": ""
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "bearing (support)",
      "count": 2,
      "note": "bearings at ends of beam"
    },
    {
      "name": "Low friction hold down",
      "tag": "",
      "shape": "line",
      "material": "hold down device",
      "count": 1,
      "note": "low friction type hold down"
    }
  ],
  "measurements": [
    {
      "label": "SPAN LENGTH",
      "value": "55'-0\"",
      "unit": "ft",
      "appliesTo": "PSC beam"
    },
    {
      "label": "BEAM LENGTH",
      "value": "53'-7 5/8\"",
      "unit": "ft",
      "appliesTo": "PSC beam"
    },
    {
      "label": "MIDPOINT TO LEFT",
      "value": "26'-9 3/16\"",
      "unit": "ft",
      "appliesTo": "PSC beam"
    },
    {
      "label": "9 3/16\"",
      "value": "9 3/16\"",
      "unit": "in",
      "appliesTo": "PSC beam (general spacing cue)"
    },
    {
      "label": "HOLE Ø",
      "value": "2",
      "unit": "in",
      "appliesTo": "Ø 2\" diameter hole for diaphragm bar"
    }
  ],
  "notes": [
    "MIDPOINT, DETAILS SYMMETRICAL ABOUT MIDPOINT UNLESS NOTED",
    "OMIT HOLE AT BEAMS 6 AND 12",
    "6 - DRAPED STRANDS",
    "Ø 2\" DIAMETER HOLE FOR DIAPHRAGM BAR",
    "ALL DIMENSIONS ARE ALONG C BEAM"
  ],
  "labels": [
    "SPAN LENGTH = 55'-0\"",
    "BEAM LENGTH = 53'-7 5/8\"",
    "ELEVATION",
    "NOTES"
  ],
  "description": "Elevation view of a long prestressed concrete beam with draped strands, bearing locations, and hole details for diaphragms. Includes span and beam length, hole diameters, and hold-down elements."
}

p10_r01Elevation

  • Ø 2" diameter hole for diaphragm bar×2circularhole

55'-0" ft SPAN LENGTH53'-7 5/8" ft BEAM LENGTH26'-9 3/16" ft MIDPOINT TO LEFT9 3/16" in 9 3/16"2 in HOLE Ø

crop

p10_r04

page 10 · other_p10_r04
Original
p10_r04
{
  "view": "Detail",
  "objects": [
    {
      "name": "diaphragm bar",
      "tag": "",
      "shape": "rectangular",
      "material": "likely steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "2\" diameter hole",
      "tag": "",
      "shape": "circular",
      "material": "hole through plate",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolted connection hardware",
      "tag": "",
      "shape": "cylindrical",
      "material": "steel",
      "count": 1,
      "note": "bolt/nut/washer assembly visible"
    }
  ],
  "measurements": [
    {
      "label": "1\" CL.",
      "value": "1",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "3\"",
      "value": "3",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "5\" DIA.",
      "value": "5",
      "unit": "in",
      "appliesTo": ""
    }
  ],
  "notes": [
    "CUT OFF EXCESS DIAPHRAGM BAR 1\" FROM BEAM FACE."
  ],
  "labels": [
    "2\" DIAMETER HOLE"
  ],
  "description": "Detail of a diaphragm-bar assembly showing a 2-inch diameter hole, a diaphragm bar with a 1-inch clearance from the beam face, and related centerline/diameter dimensions."
}

p10_r04Detail

  • 2" diameter hole×1circularhole through plate

1 in 1" CL.3 in 3"5 in 5" DIA.

Page 11

crop

p11_r01 notes

page 11 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p11_r01_notes
Original
p11_r01 notes
{
  "view": "Elevation",
  "objects": [
    {
      "name": "Bent",
      "tag": "BENT 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "Ø 2\" diameter hole for diaphragm bar",
      "tag": "",
      "shape": "circle",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Draped strands",
      "tag": "",
      "shape": "curved lines",
      "material": "steel",
      "count": 8,
      "note": "8 - draped strands"
    }
  ],
  "measurements": [
    {
      "label": "SPAN LENGTH",
      "value": "82'-0\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "BEAM LENGTH",
      "value": "80'-11 5/8\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "40'-5 13/16\"",
      "value": "40'-5 13/16\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "11 13/16\"",
      "value": "11 13/16\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "2-550 AT EACH LOCATION",
      "value": "2-550",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "2-650 AT EACH LOCATION",
      "value": "2-650",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "2-450",
      "value": "2-450",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "13-350 AT 6\"",
      "value": "13-350 AT 6\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "2 1/2\"",
      "value": "2 1/2\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "3 SPACES AT 2\"",
      "value": "3 SPACES AT 2\"",
      "unit": "",
      "appliesTo": ""
    }
  ],
  "notes": [
    "MIDPOINT, DETAILS SYMMETRICAL ABOUT MIDPOINT UNLESS NOTED",
    "OMIT HOLE AT BEAMS 6 AND 12",
    "OMIT HOLE AT BEAMS 1 AND 7",
    "ALL DIMENSIONS ARE ALONG CL BEAM"
  ],
  "labels": [
    "NOTES",
    "ELEVATION",
    "ALL DIMENSIONS ARE ALONG CL BEAM"
  ],
  "description": "Elevation view showing a long beam with Bent 2 and Bent 3 at the ends, two bearings, a 2\" diaphragm hole, and eight draped strands. Includes span and beam lengths and spacing callouts with hole-omission notes."
}

p11_r01 notesElevation

  • Ø 2" diameter hole for diaphragm bar×1circle

82'-0" ft-in SPAN LENGTH80'-11 5/8" ft-in BEAM LENGTH40'-5 13/16" ft-in 40'-5 13/16"11 13/16" in 11 13/16"2-550 2-550 AT EACH LOCATION2-650 2-650 AT EACH LOCATION2-450 2-45013-350 AT 6" 13-350 AT 6"+2 more

crop

p11_r04 recess detail for diaphragm bar ends

page 11 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p11_r04_recess_detail_for_diaphragm_bar_ends
Original
p11_r04 recess detail for diaphragm bar ends
{
  "view": "Detail",
  "objects": [
    {
      "name": "Diaphragm bar",
      "tag": "",
      "shape": "circular",
      "material": "plain steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "Washer",
      "tag": "",
      "shape": "circular",
      "material": "metal",
      "count": 1,
      "note": ""
    },
    {
      "name": "Hex nut",
      "tag": "",
      "shape": "hexagonal",
      "material": "steel (ASTM A 709 Grade 36)",
      "count": 2,
      "note": ""
    },
    {
      "name": "Hole",
      "tag": "",
      "shape": "circular",
      "material": "drilled",
      "count": 1,
      "note": "2\" DIAMETER HOLE"
    }
  ],
  "measurements": [
    {
      "label": "1\" CL.",
      "value": "1",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "3\"",
      "value": "3",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "2\" DIAMETER HOLE",
      "value": "2",
      "unit": "in",
      "appliesTo": "Hole"
    },
    {
      "label": "CUT OFF EXCESS DIAPHRAGM BAR",
      "value": "1",
      "unit": "in",
      "appliesTo": "Beam face"
    },
    {
      "label": "5\" DIA.",
      "value": "5",
      "unit": "in",
      "appliesTo": ""
    }
  ],
  "notes": [
    "DIAPHRAGM BAR SHALL BE A 1\" DIAMETER PLAIN BAR, THREADED 5\" ON EACH END, WITH 1/4\" X 3/2\" DIAMETER WASHERS AND HEX NUTS (ASTM A 709 GRADE 36).",
    "TIGHTEN DIAPHRAGM BAR AS PER SUB-SECTION 507.3.05.C OF THE GEORGIA DOT SPECIFICATIONS.",
    "AFTER EXCESS DIAPHRAGM BAR HAS BEEN CUT OFF, PAINT DIAPHRAGM BAR, WASHER, AND NUT EXPOSED IN RECESS WITH SPECIAL PROTECTIVE COATING NO.2 P AS PER SECTION 535 OF THE GEORGIA DOT SPECIFICATIONS. AFTER PAINTING, FILL THE RECESS WITH AN APPROVED EPOXY GROUT.",
    "GALVANIZING OF THE DIAPHRAGM BAR AS PER SUB-SECTION 865.2.01.B.12 OF THE GEORGIA DOT SPECIFICATIONS IS NOT REQUIRED.",
    "RECESS DETAIL FOR DIAPHRAGM BAR ENDS"
  ],
  "labels": [
    "RECESS DETAIL FOR DIAPHRAGM BAR ENDS"
  ],
  "description": "Detail of the diaphragm bar end recess showing a 2 inch diameter hole, a 1 inch diameter diaphragm bar with threaded ends, a bolt and nut/washer assembly, and a note to cut off excess bar 1 inch from the beam face with specified coating and epoxy fill."
}

p11_r04 recess detail for diaphragm bar endsDetail

  • Hole×1circulardrilled2" DIAMETER HOLE

1 in 1" CL.3 in 3"2 in 2" DIAMETER HOLE1 in CUT OFF EXCESS DIAPHRAGM BAR5 in 5" DIA.

crop

p11_r07 notes

page 11 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p11_r07_notes
Original
p11_r07 notes
{
  "view": "Notes",
  "objects": [
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "1 3/4\" diameter hole at the fixed ends, depth 7\""
    },
    {
      "name": "slot",
      "tag": "",
      "shape": "rectangular slot",
      "material": "",
      "count": 2,
      "note": "4\" x 1 3/4\" x 7\" deep slot at the expansion ends"
    },
    {
      "name": "dowel",
      "tag": "",
      "shape": "cylindrical",
      "material": "",
      "count": 1,
      "note": "1 1/2\" diameter smooth dowel"
    }
  ],
  "measurements": [
    {
      "label": "hole diameter (fixed ends)",
      "value": "1 3/4",
      "unit": "in",
      "appliesTo": "hole"
    },
    {
      "label": "hole depth",
      "value": "7",
      "unit": "in",
      "appliesTo": "hole"
    },
    {
      "label": "slot length",
      "value": "4",
      "unit": "in",
      "appliesTo": "slot"
    },
    {
      "label": "slot width",
      "value": "1 3/4",
      "unit": "in",
      "appliesTo": "slot"
    },
    {
      "label": "slot depth",
      "value": "7",
      "unit": "in",
      "appliesTo": "slot"
    },
    {
      "label": "dowel diameter",
      "value": "1 1/2",
      "unit": "in",
      "appliesTo": "dowel"
    }
  ],
  "notes": [
    "4. AT ⊥ BEARING, FORM A 1 3/4\" DIAMETER X 7\" DEEP HOLE AT THE FIXED ENDS AND A 4\" X 1 3/4\" X 7\" DEEP SLOT AT THE EXPANSION ENDS FOR A 1 1/2\" DIAMETER SMOOTH DOWEL. SEE PLAN AND ELEVATION SHEET FOR LOCATION OF FIXED AND EXPANSION ENDS."
  ],
  "labels": [],
  "description": "This crop shows a Notes entry describing holes and slots for a dowel at fixed and expansion ends, including diameters and depths, and directs to plan/elevation for locations."
}

p11_r07 notesNotes

  • hole×2circular1 3/4" diameter hole at the fixed ends, depth 7"

1 3/4 in hole diameter (fixed ends)7 in hole depth4 in slot length1 3/4 in slot width7 in slot depth1 1/2 in dowel diameter

crop

p11_r09 notes

page 11 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p11_r09_notes
Original
p11_r09 notes
{
  "view": "Notes",
  "objects": [
    {
      "name": "hole",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "formed into beams to facilitate transport"
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "beams referred to in note 6"
    },
    {
      "name": "PVC forming material",
      "tag": "",
      "shape": "",
      "material": "PVC",
      "count": null,
      "note": "PVC or similar forming materials"
    },
    {
      "name": "epoxy resin adhesive",
      "tag": "",
      "shape": "",
      "material": "epoxy resin adhesive",
      "count": null,
      "note": ""
    },
    {
      "name": "rapid setting patching material",
      "tag": "",
      "shape": "",
      "material": "rapid setting patching material",
      "count": null,
      "note": ""
    },
    {
      "name": "Georgia Standard Specification 886",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "Georgia Standard Specification 934",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": ""
    }
  ],
  "measurements": [],
  "notes": [
    "6. ALL HOLES FORMED INTO THE BEAMS TO FACILITATE TRANSPORT SHALL BE FILLED AND GIVEN A TYPE I FINISH, PRIOR TO ACCEPTANCE OF THE BEAM. REMOVE PVC OR SIMILAR FORMING MATERIALS FROM EACH HOLE, EXPOSING THE CONCRETE SURFACE. COAT INTERIOR OF HOLE WITH A TYPE II EPOXY RESIN ADHESIVE IN ACCORDANCE WITH GEORGIA STANDARD SPECIFICATION 886 AND FILL WITH A RAPID SETTING PATCHING MATERIAL IN ACCORDANCE WITH GEORGIA STANDARD SPECIFICATION 934."
  ],
  "labels": [],
  "description": "Crop shows a Notes page (Note 6) describing the procedure for finishing holes in beams used for transport: fill holes, remove PVC formers, coat with epoxy adhesive, and patch per Georgia specs 886 and 934."
}

p11_r09 notesNotes

  • holeformed into beams to facilitate transport
crop

p11_r01

page 11 · other_p11_r01
Original
p11_r01
{
  "view": "Elevation",
  "objects": [
    {
      "name": "Bent",
      "tag": "BENT 2",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 3",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "Low friction type hold down",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Draped strands",
      "tag": "8 - DRAPED STRANDS",
      "shape": "line",
      "material": "",
      "count": 8,
      "note": ""
    },
    {
      "name": "Ø 2\" diameter hole for diaphragm bar",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "SPAN LENGTH",
      "value": "82'-0\"",
      "unit": "ft",
      "appliesTo": "beam"
    },
    {
      "label": "BEAM LENGTH",
      "value": "80'-11 5/8\"",
      "unit": "ft",
      "appliesTo": "beam"
    }
  ],
  "notes": [
    "MIDPOINT, DETAILS SYMMETRICAL ABOUT MIDPOINT UNLESS NOTED",
    "OMIT HOLE AT BEAMS 1 AND 7",
    "OMIT HOLE AT BEAMS 6 AND 12"
  ],
  "labels": [
    "ELEVATION",
    "NOTES"
  ],
  "description": "Elevation view of a long-beam/bridge section showing two Bents, bearings at ends, a low-friction hold down, holes for diaphragm bars, and eight draped strands. Dimensions include overall span and beam lengths with multiple hole-related notes."
}

p11_r01Elevation

  • Ø 2" diameter hole for diaphragm bar×1circular

82'-0" ft SPAN LENGTH80'-11 5/8" ft BEAM LENGTH

crop

p11_r04

page 11 · other_p11_r04
Original
p11_r04
{
  "view": "Detail",
  "objects": [
    {
      "name": "diaphragm bar",
      "tag": "",
      "shape": "circular",
      "material": "steel",
      "count": 1,
      "note": "1\" DIAMETER PLAIN BAR; THREADED ENDS"
    },
    {
      "name": "washer",
      "tag": "",
      "shape": "circular",
      "material": "metal",
      "count": 2,
      "note": "1/4\" X 3/2\" DIAMETER WASHERS"
    },
    {
      "name": "nut",
      "tag": "",
      "shape": "hexagonal",
      "material": "steel",
      "count": 2,
      "note": "HEX NUTS (ASTM A 709 GRADE 36)"
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "2\" DIAMETER HOLE"
    }
  ],
  "measurements": [
    {
      "label": "1\" CL.",
      "value": "1\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "3\"",
      "value": "3\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "4\" EACH WAY",
      "value": "4\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "5\" DIA",
      "value": "5\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "2\" DIAMETER HOLE",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "hole"
    }
  ],
  "notes": [
    "DIAPHRAGM BAR SHALL BE A 1\" DIAMETER PLAIN BAR, THREADED 5\" ON EACH END, WITH ¼\" X 3/2\" DIAMETER WASHERS AND HEX NUTS (ASTM A 709 GRADE 36).",
    "TIGHTEN DIAPHRAGM BAR AS PER SUB-SECTION 507.3.05.C OF THE GEORGIA DOT SPECIFICATIONS.",
    "AFTER EXCESS DIAPHRAGM BAR HAS BEEN CUT OFF, PAINT DIAPHRAGM BAR, WASHER, AND NUT EXPOSED IN RECESS WITH SPECIAL PROTECTIVE COATING NO. 2 P AS PER SECTION 535 OF THE GEORGIA DOT SPECIFICATIONS. AFTER PAINTING, FILL THE RECESS WITH AN APPROVED EPOXY GROUT.",
    "GALVANIZING OF THE DIAPHRAGM BAR AS PER SUB-SECTION 865.2.01.B.12 OF THE GEORGIA DOT SPECIFICATIONS IS NOT REQUIRED."
  ],
  "labels": [
    "RECESS DETAIL FOR DIAPHRAGM BAR ENDS"
  ],
  "description": "Detail view showing the recess for diaphragm bar ends with a 1\" diameter diaphragm bar, threaded ends, washers and nuts, and a 2\" diameter hole. Includes notes on material, coating, and installation requirements for the end details."
}

p11_r04Detail

  • hole×1circular2" DIAMETER HOLE

1" in 1" CL.3" in 3"4" in 4" EACH WAY5" in 5" DIA2" in 2" DIAMETER HOLE

Page 12

crop

p12_r03 section a a

page 12 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p12_r03_section_a_a
Original
p12_r03 section a a
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent 1",
      "tag": "BENT 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in plan"
    },
    {
      "name": "Bent 4",
      "tag": "BENT 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Similar to Bent 1"
    },
    {
      "name": "Bearing pad hole",
      "tag": "",
      "shape": "circle",
      "material": "void",
      "count": 1,
      "note": "3\" diameter hole in bearing pad"
    },
    {
      "name": "Beveled shim plate",
      "tag": "",
      "shape": "rectangle",
      "material": "",
      "count": 1,
      "note": "3\" diameter hole"
    },
    {
      "name": "Sealing rib",
      "tag": "",
      "shape": "strip around perimeter",
      "material": "concrete",
      "count": 1,
      "note": "3/16\" sealing rib all around"
    }
  ],
  "measurements": [
    {
      "label": "Bearing pad hole diameter",
      "value": "3",
      "unit": "in",
      "appliesTo": "Bearing pad hole"
    },
    {
      "label": "Beveled shim plate hole diameter",
      "value": "3",
      "unit": "in",
      "appliesTo": "Beveled shim plate"
    },
    {
      "label": "Sealing rib thickness",
      "value": "3/16",
      "unit": "in",
      "appliesTo": "Sealing rib"
    }
  ],
  "notes": [
    "90°-00'-00\", TYP.",
    "3/16\" SEALING RIB, ALL AROUND"
  ],
  "labels": [
    "PLAN",
    "BENT 1 SHOWN",
    "BENT 4 SIMILAR",
    "ENDWALL NOT SHOWN",
    "SECTION A-A"
  ],
  "description": "Plan view showing Bent 1 and Bent 4 with bearing pad hole and beveled shim plate; includes a 3\" diameter bearing pad hole and a 3/16\" sealing rib around the perimeter. Endwall is not shown; Bent 4 is similar to Bent 1."
}

p12_r03 section a aPlan

  • Bearing pad hole×1circlevoid3" diameter hole in bearing pad

3 in Bearing pad hole diameter3 in Beveled shim plate hole diameter3/16 in Sealing rib thickness

Page 13

crop

p13_r07 section b b

page 13 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p13_r07_section_b_b
Original
p13_r07 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "corner bolts",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "conduit holes",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "minimum centerline clearance",
      "value": "2\"",
      "unit": "MIN.",
      "appliesTo": "top clearance"
    },
    {
      "label": "minimum height",
      "value": "2'-0\"",
      "unit": "MIN.",
      "appliesTo": "vertical clearance"
    },
    {
      "label": "typical spacing",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "vertical spacing"
    },
    {
      "label": "left/right spacing",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "bottom width segments"
    },
    {
      "label": "left/right spacing (end)",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "bottom width segments"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "drawing scale"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "2\" CL. 3 SIDES"
  ],
  "description": "This crop shows a Section B-B cross-section of an enclosure with an outer boundary and an inner recessed opening, four corner bolts, and two bottom circular openings. It includes dimension notes for overall width, minimum clearances, typical spacing, and bottom side clearances, with a scale of 3/4\" = 1'-0\"."
}

p13_r07 section b bSection

  • conduit holes×2circular

3'-0" ft-in overall width2" MIN. minimum centerline clearance2'-0" MIN. minimum height1'-0" typical spacing1'-6" left/right spacing1'-6" left/right spacing (end)3/4" = 1'-0" scale

crop

p13_r06

page 13 · other_p13_r06
Original
p13_r06
{
  "view": "Section",
  "objects": [
    {
      "name": "outer plate / base plate",
      "tag": "",
      "shape": "rectangular with rounded corners",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolt holes",
      "tag": "4-Ø10",
      "shape": "circle",
      "material": "",
      "count": 4,
      "note": "positions along top edge inside plate"
    },
    {
      "name": "central post / column",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "lower vertical member",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "outer plate"
    },
    {
      "label": "left segment width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "outer plate"
    },
    {
      "label": "right segment width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "outer plate"
    },
    {
      "label": "hole pattern center to edge spacing",
      "value": "2-4 1/2\"",
      "unit": "",
      "appliesTo": "bolt holes"
    },
    {
      "label": "minimum clearance to side",
      "value": "2\" MIN. CL.",
      "unit": "",
      "appliesTo": "perimeter clearance (top)"
    },
    {
      "label": "overall height",
      "value": "2'-0\" MIN.",
      "unit": "",
      "appliesTo": "outer perimeter height"
    },
    {
      "label": "three-sided clearance",
      "value": "2\" CL. 3 SIDES",
      "unit": "",
      "appliesTo": "perimeter clearance"
    },
    {
      "label": "typical interior clearance",
      "value": "1'-0\" TYP.",
      "unit": "",
      "appliesTo": "inner dimension"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "title block / drawing scale"
    }
  ],
  "notes": [
    "Section A-A shows a cross sectional view of a base plate with four bolt holes Ø10 and a central vertical member; three-sided clearance is indicated."
  ],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "A cropped Section A-A drawing showing a rounded rectangular base plate with four bolt holes (Ø10), a central vertical member, and specified clearances; overall width 3'-0\", with 2\" minimum side clearance and 2'-0\" minimum height, at scale 3/4\" = 1'-0\"."
}

p13_r06Section

  • bolt holes4-Ø10×4circlepositions along top edge inside plate

3'-0" overall width1'-6" left segment width1'-6" right segment width2-4 1/2" hole pattern center to edge spacing2" MIN. CL. minimum clearance to side2'-0" MIN. overall height2" CL. 3 SIDES three-sided clearance1'-0" TYP. typical interior clearance+1 more

crop

p13_r07

page 13 · other_p13_r07
Original
p13_r07
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary of enclosure",
      "tag": "",
      "shape": "rounded rectangle",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner boundary / recess",
      "tag": "",
      "shape": "rounded rectangle",
      "material": "",
      "count": 1,
      "note": "inner boundary of enclosure"
    },
    {
      "name": "top bolt holes",
      "tag": "",
      "shape": "circle",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "bottom holes",
      "tag": "2-415 SERIES",
      "shape": "circle",
      "material": "",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "ft",
      "appliesTo": "outer boundary"
    },
    {
      "label": "centerline offset (left)",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "centerline to left edge"
    },
    {
      "label": "centerline offset (right)",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "centerline to right edge"
    },
    {
      "label": "top clearance (min. CL.)",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "top area"
    },
    {
      "label": "vertical clearance (min.)",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "right side"
    },
    {
      "label": "internal typ. spacing",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "internal feature spacing"
    },
    {
      "label": "clearance on three sides",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "three sides"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "B.F"
  ],
  "description": "Cross-section through a rectangular enclosure with an inner recess and two topside bolt holes, showing centerline, clearances, and a pair of bottom holes labeled as 2-415 SERIES."
}

p13_r07Section

  • top bolt holes×2circle
  • bottom holes2-415 SERIES×2circle

3'-0" ft overall width1'-6" ft centerline offset (left)1'-6" ft centerline offset (right)2" in top clearance (min. CL.)2'-0" ft vertical clearance (min.)1'-0" ft internal typ. spacing2" in clearance on three sides

Page 14

crop

p14_r01

page 14 · other_p14_r01
Original
p14_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "BEAM",
      "tag": "BEAM 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 5",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 6",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 7",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 8",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 9",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 10",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 11",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "BEAM 12",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BENT",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Bent locations (2 visible)"
    },
    {
      "name": "BEARING",
      "tag": "C BEARING",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "HOLE FOR DOWEL",
      "tag": "",
      "shape": "circular",
      "material": "concrete",
      "count": 1,
      "note": "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
    }
  ],
  "measurements": [
    {
      "label": "PLAN LEFT LENGTH",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PLAN RIGHT LENGTH",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "EDGE TO BEAM 1",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "BEAM 1"
    },
    {
      "label": "BEAM SPACING 1",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 1"
    },
    {
      "label": "BEAM SPACING 2",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 2"
    },
    {
      "label": "BEAM SPACING 3",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 3"
    },
    {
      "label": "BEAM SPACING 4",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 4"
    },
    {
      "label": "BEAM SPACING 5",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 5"
    },
    {
      "label": "BEAM SPACING 6",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 6"
    },
    {
      "label": "BEAM SPACING 7",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 7"
    },
    {
      "label": "BEAM SPACING 8",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 8"
    },
    {
      "label": "BEAM SPACING 9",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 9"
    },
    {
      "label": "BEAM SPACING 10",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 10"
    },
    {
      "label": "BEAM SPACING 11",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 11"
    },
    {
      "label": "BEAM SPACING 12",
      "value": "7'-7/16\"",
      "unit": "",
      "appliesTo": "BEAM 12"
    },
    {
      "label": "TOTAL PLAN LENGTH LEFT",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "TOTAL PLAN LENGTH RIGHT",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": ""
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "SR 2I WB = PGL",
    "SR 2I EB = PGL",
    "STA. 17+81.35",
    "STA. 17+74.65",
    "PLAN (BENT 2 LEFT)",
    "PLAN (BENT 2 RIGHT)"
  ],
  "description": "Plan view crop showing Bent 2 left and Bent 2 right sections with 12 beams across. It includes bearing locations, dowel hole note, and plan callouts with station markers and WB/EB references."
}

p14_r01Plan

  • HOLE FOR DOWEL×1circularconcreteFORM 3" DIA. X 12" DEEP HOLE FOR 1/2" DIA. SMOOTH DOWEL BAR, TYP.

42'-6" PLAN LEFT LENGTH42'-6" PLAN RIGHT LENGTH6'-0" EDGE TO BEAM 17'-7/16" BEAM SPACING 17'-7/16" BEAM SPACING 27'-7/16" BEAM SPACING 37'-7/16" BEAM SPACING 47'-7/16" BEAM SPACING 5+9 more

Page 15

crop

p15_r01

page 15 · other_p15_r01
Original
p15_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "BEAM",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 12,
      "note": "Beams shown in two plan blocks (BEAM 1–12)."
    },
    {
      "name": "BEARING",
      "tag": "C BEARING",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "HOLE FOR DOWEL BAR",
      "tag": "FORM 3 DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP.",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Holes for dowel bars (typical)."
    }
  ],
  "measurements": [
    {
      "label": "42'-6\"",
      "value": "42'-6\"",
      "unit": "ft",
      "appliesTo": "Plan width overall"
    },
    {
      "label": "6'-0\"",
      "value": "6'-0\"",
      "unit": "ft",
      "appliesTo": "Left segment width"
    },
    {
      "label": "7'-7 1/16\"",
      "value": "7'-7 1/16\"",
      "unit": "ft",
      "appliesTo": "Spacing between beams (repetition across plan)"
    },
    {
      "label": "7'-7 1/16\"",
      "value": "7'-7 1/16\"",
      "unit": "ft",
      "appliesTo": "Spacing between beams (repetition across plan)"
    },
    {
      "label": "2'-3/8\"",
      "value": "2'-3/8\"",
      "unit": "ft",
      "appliesTo": "Dim near left end"
    }
  ],
  "notes": [
    "FORM 3 DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "PLAN",
    "PLAN (BENT 3 LEFT)",
    "PLAN (BENT 3 RIGHT)"
  ],
  "description": "Plan view crop showing Bent 3 left and Bent 3 right sections with BEAMs 1–12, end bearings, and dowel-bar hole details."
}

p15_r01Plan

  • HOLE FOR DOWEL BARFORM 3 DIA. X 12" DEEP HOLE FOR 1 1/2" DIA. SMOOTH DOWEL BAR, TYP.circularHoles for dowel bars (typical).

42'-6" ft 42'-6"6'-0" ft 6'-0"7'-7 1/16" ft 7'-7 1/16"7'-7 1/16" ft 7'-7 1/16"2'-3/8" ft 2'-3/8"

Page 16

crop

p16_r15 section c c

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r15_section_c_c
Original
p16_r15 section c c
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "diagonal reinforcement bars",
      "tag": "",
      "shape": "diagonal lines",
      "material": "reinforced steel",
      "count": 2,
      "note": "two bars crossing inside opening"
    },
    {
      "name": "boltholes / anchor bolt holes",
      "tag": "",
      "shape": "circular",
      "material": "concrete/steel",
      "count": 12,
      "note": "pattern around interior perimeter"
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "overall height",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "clearance all around",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "inner boundary opening"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION C-C"
  ],
  "description": "Section view (C-C) of a square 3'-6\" x 3'-6\" concrete element showing an inner opening with 2\" clearances on all sides, diagonal reinforcement within the opening, and a bolt-hole pattern (12 holes) around the interior perimeter."
}

p16_r15 section c cSection

  • boltholes / anchor bolt holes×12circularconcrete/steelpattern around interior perimeter

3'-6" ft-in overall width3'-6" ft-in overall height2" in clearance all around

crop

p16_r15

page 16 · other_p16_r15
Original
p16_r15
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner opening boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "anchor bolts",
      "tag": "",
      "shape": "circular",
      "material": "steel",
      "count": null,
      "note": ""
    },
    {
      "name": "reinforcing bars",
      "tag": "",
      "shape": "diagonal",
      "material": "steel rebar",
      "count": null,
      "note": ""
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "concrete",
      "count": null,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "Overall height",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "Clearance all around",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "opening boundary to outer boundary"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION C-C",
    "12-1121 OR 1131",
    "2\" CL. ALL SIDES",
    "620 OR 630",
    "621 OR 631"
  ],
  "description": "Detail view of a square opening with an inner boundary inset from the outer frame. The pattern shows anchor bolts around the inner edge with diagonal reinforcement bars between bolts and a circular hole location on the right. Dimensional callouts indicate a 3'-6\" width and height with 2\" clearance on all sides, and the section is labeled SECTION C-C."
}

p16_r15Section

  • holecircularconcrete

3'-6" ft-in Overall width3'-6" ft-in Overall height2" in Clearance all around

Page 17

crop

p17_r06 section a a

page 17 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p17_r06_section_a_a
Original
p17_r06 section a a
{
  "view": "Section",
  "objects": [
    {
      "name": "outer frame / boundary",
      "tag": "",
      "shape": "rounded rectangle",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolts or anchor holes",
      "tag": "",
      "shape": "circle",
      "material": "",
      "count": 4,
      "note": "at inner corners"
    },
    {
      "name": "top brace / bracket",
      "tag": "",
      "shape": "trapezoid",
      "material": "",
      "count": 1,
      "note": "top member labeled 2-442"
    },
    {
      "name": "centerline post / shaft",
      "tag": "",
      "shape": "rectangular column",
      "material": "",
      "count": 1,
      "note": "centerline axis"
    },
    {
      "name": "bottom legs (2)",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "support for center post"
    },
    {
      "name": "inner recess / opening",
      "tag": "",
      "shape": "rectangle",
      "material": "",
      "count": 1,
      "note": "inner opening within outer frame"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Outer frame width"
    },
    {
      "label": "Left/right half width (each)",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "From outer edge to centerline"
    },
    {
      "label": "Bottom left/right half width",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "Bottom distance from centerline"
    },
    {
      "label": "Minimum vertical clearance",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "Right side vertical clearance"
    },
    {
      "label": "Typical vertical spacing",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "Vertical spacing inside section"
    }
  ],
  "notes": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\"",
    "3 SIDES",
    "2\" CL."
  ],
  "description": "Section A-A view of a rectangular frame with an interior centerline post and four corner bolts. The dimensions show a 3'-0\" overall width with 1'-6\" side segments and a downward central element; notes indicate a minimum centerline clearance and typical spacing."
}

p17_r06 section a aSection

  • bolts or anchor holes×4circleat inner corners

3'-0" ft-in Overall width1'-6" ft-in Left/right half width (each)1'-6" ft-in Bottom left/right half width2'-0" ft Minimum vertical clearance1'-0" ft Typical vertical spacing

crop

p17_r07 section b b

page 17 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p17_r07_section_b_b
Original
p17_r07 section b b
{
  "view": "Section",
  "objects": [
    {
      "name": "outer frame",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner frame opening",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolt holes (top row)",
      "tag": "",
      "shape": "circular",
      "material": "unknown",
      "count": 4,
      "note": "holes along top inner edge"
    },
    {
      "name": "bolt holes (bottom row)",
      "tag": "",
      "shape": "circular",
      "material": "unknown",
      "count": 2,
      "note": "two holes for 2-445 SERIES"
    },
    {
      "name": "support braces",
      "tag": "",
      "shape": "diagonal brace",
      "material": "unknown",
      "count": 2,
      "note": "triangular braces from bottom holes toward center"
    },
    {
      "name": "centerline",
      "tag": "",
      "shape": "dashed line",
      "material": "unknown",
      "count": 1,
      "note": "centerline reference"
    }
  ],
  "measurements": [
    {
      "label": "outer width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "outer frame width"
    },
    {
      "label": "left segment to centerline",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "horizontal distance to centerline"
    },
    {
      "label": "right segment to centerline",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "horizontal distance to centerline"
    },
    {
      "label": "clear sides",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "sides clear"
    },
    {
      "label": "vertical clearance min",
      "value": "2'-0\"",
      "unit": "ft-in",
      "appliesTo": "vertical minimum clearance"
    },
    {
      "label": "centerline vertical clearance min",
      "value": "2'-0\"",
      "unit": "ft-in",
      "appliesTo": "vertical minimum clearance to centerline"
    },
    {
      "label": "inner opening width",
      "value": "4-1040",
      "unit": "",
      "appliesTo": "inner opening width"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B"
  ],
  "description": "Section B-B through a rectangular frame with an inner opening. The drawing shows an outer frame, an inner frame opening, six bolt holes (top row of four and bottom row of two for the 2-445 series), two diagonal support braces, and a centerline reference. Distances indicate 3'-0\" overall width, 1'-6\" left and right to the centerline, 2\" clear sides on three sides, and minimum vertical clearances of 2'-0\"."
}

p17_r07 section b bSection

  • bolt holes (top row)×4circularunknownholes along top inner edge
  • bolt holes (bottom row)×2circularunknowntwo holes for 2-445 SERIES

3'-0" ft-in outer width1'-6" ft-in left segment to centerline1'-6" ft-in right segment to centerline2" in clear sides2'-0" ft-in vertical clearance min2'-0" ft-in centerline vertical clearance min4-1040 inner opening width

crop

p17_r06

page 17 · other_p17_r06
Original
p17_r06
{
  "view": "Section",
  "objects": [
    {
      "name": "outer plate / section boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner pocket / recess",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "central post",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "3'-0\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Left span",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Right span",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Bolt hole pattern (2-4-2)",
      "value": "2-442",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Minimum centerline clearance",
      "value": "2\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "Typ. width (inside pocket)",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": ""
    }
  ],
  "notes": [],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "Cross-section A-A of a member showing an outer rectangular plate with an inner recess, four corner holes, and a central vertical post extending downward. Includes notes on centerline clearance and minimum clearance to sides."
}

p17_r06Section

  • hole×4circular

3'-0" ft Overall width1'-6" ft Left span1'-6" ft Right span2-442 Bolt hole pattern (2-4-2)2" in Minimum centerline clearance1'-0" ft Typ. width (inside pocket)

crop

p17_r07

page 17 · other_p17_r07
Original
p17_r07
{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "outer boundary of the section"
    },
    {
      "name": "inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "inner opening/frame"
    },
    {
      "name": "bolt/anchor holes",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "two circular holes near bottom"
    }
  ],
  "measurements": [
    {
      "label": "overall width (top)",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "outer boundary top width"
    },
    {
      "label": "bottom left offset",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "left bottom to centerline"
    },
    {
      "label": "bottom right offset",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "right bottom to centerline"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION B-B"
    }
  ],
  "notes": [
    "Section B-B cross-section with outer and inner boundaries and two bottom holes; shows vertical features and centerline reference."
  ],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "2-442",
    "4-1040",
    "2-445 SERIES"
  ],
  "description": "Cross-section view B-B of a concrete feature showing an outer boundary and an inner opening, with two bottom circular holes and supporting elements. Key dimensions visible include 3'-0\" overall width and 1'-6\" offsets from the centerline; scale is 3/4\" = 1'-0\"."
}

p17_r07Section

  • bolt/anchor holes×2circulartwo circular holes near bottom

3'-0" overall width (top)1'-6" bottom left offset1'-6" bottom right offset3/4" = 1'-0" scale