Drawing → BOQ
← Mindmapwhat the drawings said

Internal Plate

3 pages · 6 crops · ×7 · superstructure

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a structural steel plate class.

How the sheets named it

Internal platesinternal platesplate, identifier 4-1010outer plate / base platePlate, vertical with bolt holesplate, bolt-hole pattern

Every dimension read for it3

  • 12 gauge gageInternal plate thicknessp12 · p12_r08 load plates
  • 12 gaugeinternal plates gaugep12 · p12_r08
  • 1'-0" in1'-0"p16 · p16_r09 detail 3

Notes on the sheets that carry it

  • p13Section A-A shows a cross sectional view of a base plate with four bolt holes Ø10 and a central vertical member; three-sided clearance is indicated.

Every crop it was read in — the drawing beside what the model took off it

Page 12

crop

p12_r08 load plates

page 12 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p12_r08_load_plates
Original
p12_r08 load plates
{
  "view": "Detail",
  "objects": [
    {
      "name": "Load plates",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "top and bottom"
    },
    {
      "name": "Sealing rib",
      "tag": "",
      "shape": "rib",
      "material": "",
      "count": 2,
      "note": "top and bottom"
    },
    {
      "name": "Internal plates",
      "tag": "",
      "shape": "rectangular",
      "material": "12 gauge",
      "count": 2,
      "note": "internal plates"
    }
  ],
  "measurements": [
    {
      "label": "Load plates thickness",
      "value": "3/16\"",
      "unit": "in",
      "appliesTo": "Load plates"
    },
    {
      "label": "Sealing rib thickness",
      "value": "3/16\"",
      "unit": "in",
      "appliesTo": "Sealing rib"
    },
    {
      "label": "Internal plate thickness",
      "value": "12 gauge",
      "unit": "gage",
      "appliesTo": "Internal plates"
    },
    {
      "label": "Central thickness T",
      "value": "T",
      "unit": "",
      "appliesTo": "Central region"
    }
  ],
  "notes": [],
  "labels": [
    "LOAD PLATES, TOP AND BOTTOM",
    "12 GAGE INTERNAL PLATES",
    "3/16\" SEALING RIB, TOP AND BOTTOM"
  ],
  "description": "Detail showing a plate assembly with load plates (top and bottom) of 3/16 inch, sealing ribs (top and bottom) of 3/16 inch, and internal plates of 12 gauge, with a central thickness dimension labeled T."
}

p12_r08 load platesDetail

  • Internal plates×2rectangular12 gaugeinternal plates

3/16" in Load plates thickness3/16" in Sealing rib thickness12 gauge gage Internal plate thicknessT Central thickness T

crop

p12_r08

page 12 · other_p12_r08
Original
p12_r08
{
  "view": "Detail",
  "objects": [
    {
      "name": "load plates",
      "tag": "",
      "shape": "rectangular",
      "material": "not stated",
      "count": 2,
      "note": "top and bottom"
    },
    {
      "name": "internal plates",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "12 gauge internal plates"
    },
    {
      "name": "sealing rib",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "top and bottom, 3/16 sealing rib"
    }
  ],
  "measurements": [
    {
      "label": "load plates thickness",
      "value": "3/16",
      "unit": "in",
      "appliesTo": "load plates"
    },
    {
      "label": "sealing rib thickness",
      "value": "3/16",
      "unit": "in",
      "appliesTo": "sealing rib"
    },
    {
      "label": "internal plates gauge",
      "value": "12",
      "unit": "gauge",
      "appliesTo": "internal plates"
    }
  ],
  "notes": [],
  "labels": [
    "3/16 LOAD PLATES, TOP AND BOTTOM",
    "12 GAGE INTERNAL PLATES",
    "3/16 SEALING RIB, TOP AND BOTTOM"
  ],
  "description": "Detail of a plate assembly showing top and bottom load plates, internal plates (12 gauge), and sealing ribs (3/16) as labeled."
}

p12_r08Detail

  • internal plates×2rectangular12 gauge internal plates

3/16 in load plates thickness3/16 in sealing rib thickness12 gauge internal plates gauge

Page 13

crop

p13_r06 section a a

page 13 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p13_r06_section_a_a
Original
p13_r06 section a a
{
  "view": "Section",
  "objects": [
    {
      "name": "outer pocket frame",
      "tag": "",
      "shape": "rectangular with rounded corners",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolts",
      "tag": "",
      "shape": "circle",
      "material": "",
      "count": 4,
      "note": "bolts/fasteners at corners inside pocket"
    },
    {
      "name": "central post / sleeve",
      "tag": "",
      "shape": "rectangular/linear ledge inside center",
      "material": "",
      "count": 1,
      "note": "centerline element shown with dashed centerline"
    },
    {
      "name": "plate, identifier 4-1010",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "dimensioned element labeled 4-1010"
    },
    {
      "name": "bottom support / pedestal",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "lower protruding member under pocket"
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "ft",
      "appliesTo": "outer pocket frame"
    },
    {
      "label": "inner segment width (each side)",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "top inner segments"
    },
    {
      "label": "centerline to left edge",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "top/center area"
    },
    {
      "label": "centerline to right edge",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": "top/center area"
    },
    {
      "label": "section scale",
      "value": "3/4\"",
      "unit": "in",
      "appliesTo": "figural scale note"
    },
    {
      "label": "min centerline clearance",
      "value": "2'",
      "unit": "ft",
      "appliesTo": "centerline clearance"
    },
    {
      "label": "min vertical clearance",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "vertical dimension on right"
    },
    {
      "label": "three-sides clearance",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "three sides"
    },
    {
      "label": "typical offset",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "typical section offset"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "Cross-section view Section A-A of a rectangular pocket/Frame with bolt pattern and centerline member. Shows overall width, inner segment spacing, and minimum clearances as depicted on Sheet page 13."
}

p13_r06 section a aSection

  • plate, identifier 4-1010×1rectangulardimensioned element labeled 4-1010

3'-0" ft overall width1'-6" ft inner segment width (each side)1'-6" ft centerline to left edge1'-6" ft centerline to right edge3/4" in section scale2' ft min centerline clearance2'-0" ft min vertical clearance2" in three-sides clearance+1 more

crop

p13_r06

page 13 · other_p13_r06
Original
p13_r06
{
  "view": "Section",
  "objects": [
    {
      "name": "outer plate / base plate",
      "tag": "",
      "shape": "rectangular with rounded corners",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolt holes",
      "tag": "4-Ø10",
      "shape": "circle",
      "material": "",
      "count": 4,
      "note": "positions along top edge inside plate"
    },
    {
      "name": "central post / column",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "lower vertical member",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "outer plate"
    },
    {
      "label": "left segment width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "outer plate"
    },
    {
      "label": "right segment width",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "outer plate"
    },
    {
      "label": "hole pattern center to edge spacing",
      "value": "2-4 1/2\"",
      "unit": "",
      "appliesTo": "bolt holes"
    },
    {
      "label": "minimum clearance to side",
      "value": "2\" MIN. CL.",
      "unit": "",
      "appliesTo": "perimeter clearance (top)"
    },
    {
      "label": "overall height",
      "value": "2'-0\" MIN.",
      "unit": "",
      "appliesTo": "outer perimeter height"
    },
    {
      "label": "three-sided clearance",
      "value": "2\" CL. 3 SIDES",
      "unit": "",
      "appliesTo": "perimeter clearance"
    },
    {
      "label": "typical interior clearance",
      "value": "1'-0\" TYP.",
      "unit": "",
      "appliesTo": "inner dimension"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "title block / drawing scale"
    }
  ],
  "notes": [
    "Section A-A shows a cross sectional view of a base plate with four bolt holes Ø10 and a central vertical member; three-sided clearance is indicated."
  ],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "A cropped Section A-A drawing showing a rounded rectangular base plate with four bolt holes (Ø10), a central vertical member, and specified clearances; overall width 3'-0\", with 2\" minimum side clearance and 2'-0\" minimum height, at scale 3/4\" = 1'-0\"."
}

p13_r06Section

  • outer plate / base plate×1rectangular with rounded corners

3'-0" overall width1'-6" left segment width1'-6" right segment width2-4 1/2" hole pattern center to edge spacing2" MIN. CL. minimum clearance to side2'-0" MIN. overall height2" CL. 3 SIDES three-sided clearance1'-0" TYP. typical interior clearance+1 more

Page 16

crop

p16_r09 detail 3

page 16 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p16_r09_detail_3
Original
p16_r09 detail 3
{
  "view": "Detail",
  "objects": [
    {
      "name": "Panel, grid pattern",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "grid interior lines"
    },
    {
      "name": "Plate, vertical with bolt holes",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "holes along face (bolts)"
    }
  ],
  "measurements": [
    {
      "label": "3'-0 7/16\"",
      "value": "3'-0 7/16\"",
      "unit": "in",
      "appliesTo": "Panel, grid pattern"
    },
    {
      "label": "1'-0\"",
      "value": "1'-0\"",
      "unit": "in",
      "appliesTo": "Plate, vertical with bolt holes"
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL 3",
    "SECTION D-D",
    "D"
  ],
  "description": "Detail 3 view of a grid-pattern panel on the left and a Section D-D through a slender vertical plate with bolt holes on the right. The left panel has an overall width of 3'-0 7/16\"; the right member is 1'-0\" wide with holes visible along its face."
}

p16_r09 detail 3Detail

  • Plate, vertical with bolt holes×1rectangularholes along face (bolts)

3'-0 7/16" in 3'-0 7/16"1'-0" in 1'-0"

crop

p16_r05

page 16 · other_p16_r05
Original
p16_r05
{
  "view": "Detail",
  "objects": [
    {
      "name": "plate, bolt-hole pattern",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "block, bottom",
      "tag": "510A",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "width",
      "value": "1'-0\"",
      "unit": "ft-in",
      "appliesTo": "plate"
    }
  ],
  "notes": [],
  "labels": [],
  "description": "Detail view of a tall rectangular plate with a vertical pattern of bolt holes and a bottom attached block labeled 510A. The plate width is 1'-0\". The crop focuses on the bolt-hole pattern portion and its associated bottom element."
}

p16_r05Detail

  • plate, bolt-hole patternrectangular

1'-0" ft-in width