Drawing → BOQ
← Mindmapwhat the drawings said

Top of high rail

1 page · 1 crop · ×1

Matched toCrossing Alignmentbridge.alignment_system.crossing_alignmenton “rail”

0 of 1 required measurements have a number
The class asks forUnitA reading with that nameFrom
Skew AngleTHETAdegno reading by that name
ChainageCHoptionalmno reading by that name

Paired on the measurement’s name only, which cannot know that three span lengths sum to the deck length. Step 3 works these out properly for every item it matches — reading every crop behind the item, deriving what the drawings imply and showing its arithmetic. This item has not had that pass yet; the button runs it for this one.

Notes on the sheets that carry it

  • p1ENDFILL CONTROL DIAGRAM
  • p1NO SCALE
  • p1* NORMAL TO RR

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r03 endfill control diagram

page 1 · gdot_drawing_0a6d24ffdd874879a37c7122f1fd8bef_p01_r03_endfill_control_diagram
Original
p01_r03 endfill control diagram
{
  "view": "Cross Section",
  "objects": [
    {
      "name": "Future track",
      "tag": "",
      "shape": "dashed line",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "End fill",
      "tag": "",
      "shape": "polyline / fill area",
      "material": "earth fill",
      "count": 1,
      "note": "cross-section outline of end fill"
    },
    {
      "name": "Top of high rail",
      "tag": "",
      "shape": "line",
      "material": "rail/top rail",
      "count": 1,
      "note": "typical"
    },
    {
      "name": "End fill control point",
      "tag": "",
      "shape": "point",
      "material": "",
      "count": 1,
      "note": "typical control point"
    }
  ],
  "measurements": [
    {
      "label": "15'-0\"",
      "value": "15'-0\"",
      "unit": "ft",
      "appliesTo": "from left reference (future track) to first vertical line"
    },
    {
      "label": "4'-0\"",
      "value": "4'-0\"",
      "unit": "ft",
      "appliesTo": "distance to next vertical line"
    },
    {
      "label": "2'-0\"",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "distance to next vertical line"
    },
    {
      "label": "4'-9\"",
      "value": "4'-9\"",
      "unit": "ft",
      "appliesTo": "dimension near top rail (typ.)"
    }
  ],
  "notes": [
    "ENDFILL CONTROL DIAGRAM",
    "NO SCALE",
    "* NORMAL TO RR"
  ],
  "labels": [
    "FUTURE TRACK",
    "TOP OF HIGH RAIL, TYP.",
    "ENDFILL CONTROL POINT, TYP."
  ],
  "description": "Cross-section diagram titled Endfill Control Diagram showing a future track alignment on the left, end-fill geometry with typical top-of-rail references, and labeled control point. Dimensions indicate spacing along the section, and the drawing is not to scale."
}

p01_r03 endfill control diagramCross Section

  • Top of high rail×1linerail/top railtypical

15'-0" ft 15'-0"4'-0" ft 4'-0"2'-0" ft 2'-0"4'-9" ft 4'-9"