Drawing → BOQ
← Mindmapwhat the drawings said

Beam Centerline

5 pages · 6 crops · ×72 · other

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a beam centerline reference class.

How the sheets named it

Beam centerline locationsbeam centerline locationsC BEAM 1 through C BEAM 12C BEAM 1–6C BEAM 7–12C BEAM 1–C BEAM 12℄ BEAM 1 through ℄ BEAM 12BEAM 1–6BEAM 7–12℄ BEAM 1–12

Notes on the sheets that carry it

  • p13SEE DETAIL 1 BRIDGE SHEET 16
  • p13FORM 3" DIA. X 12" DEEP HOLE FOR 1 1/2" DIA. SMOOTH DOWEL, TYP.
  • p13SEE DETAIL 2 BRIDGE SHEET 16
  • p13BEGIN BRIDGE B.F.P.R. BENT 1 STA. 17+28.00
  • p14FORM 3" DIA. X 12" DEEP HOLE FOR 1/2" DIA. SMOOTH DOWEL BAR, TYP.
  • p17FORM 3" DIA. X 12" DEEP HOLE FOR 1/2" DIA. SMOOTH DOWEL, TYP.
  • p17SEE DETAIL 3 BRIDGE SHEET 16
  • p17SEE DETAIL 4 BRIDGE SHEET 16
  • p17FORM 3” DIA. X 12” DEEP HOLE FOR 1½” DIA. SMOOTH DOWEL, TYP.

Every crop it was read in — the drawing beside what the model took off it

Page 13

crop

p13_r01 title block

page 13 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p13_r01_title_block
Original
p13_r01 title block
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap",
      "tag": "BENT 1",
      "shape": "long rectangular with rounded ends",
      "material": "",
      "count": 2,
      "note": "Shown as PLAN (BENT RIGHT) and PLAN (BENT LEFT)."
    },
    {
      "name": "beam centerline",
      "tag": "C BEAM 1 through C BEAM 12",
      "shape": "line",
      "material": "",
      "count": 12,
      "note": "Beam centerlines are labeled C BEAM 1–6 at the left plan and C BEAM 7–12 at the right plan."
    },
    {
      "name": "formed dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": "At the rounded cap ends; called out as typical."
    }
  ],
  "measurements": [
    {
      "label": "Dowel-hole diameter",
      "value": "3",
      "unit": "in.",
      "appliesTo": "formed dowel hole"
    },
    {
      "label": "Dowel-hole depth",
      "value": "12",
      "unit": "in.",
      "appliesTo": "formed dowel hole"
    },
    {
      "label": "Smooth dowel diameter",
      "value": "1 1/2",
      "unit": "in.",
      "appliesTo": "formed dowel hole"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "Station",
      "value": "17+19.65",
      "unit": "",
      "appliesTo": "B.F.P.R. BENT 1"
    },
    {
      "label": "Station",
      "value": "17+28.00",
      "unit": "",
      "appliesTo": "B.F.P.R. BENT 1"
    },
    {
      "label": "Dimension",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "Dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "Dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "Dimension",
      "value": "5'-4 3/4\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "Dimension",
      "value": "2'-9 3/8\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "Typical dimension",
      "value": "2'-3/4\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "End dimension",
      "value": "3'-0 7/8\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "C BEAM centerlines"
    },
    {
      "label": "Beam spacing",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "C BEAM centerlines"
    },
    {
      "label": "End dimension",
      "value": "6'-10 1/2\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "End dimension",
      "value": "6'-10 9/16\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "Overall dimension",
      "value": "44'-1 1/16\"",
      "unit": "",
      "appliesTo": "BENT 1"
    },
    {
      "label": "End width dimension",
      "value": "4'-0 7/16\"",
      "unit": "",
      "appliesTo": "BENT 1"
    }
  ],
  "notes": [
    "SEE DETAIL 1 BRIDGE SHEET 16",
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 2 BRIDGE SHEET 16",
    "BEGIN BRIDGE B.F.P.R. BENT 1 STA. 17+28.00"
  ],
  "labels": [
    "PLAN",
    "(BENT RIGHT)",
    "PLAN",
    "(BENT LEFT)",
    "AHEAD",
    "SR 21 EB - PGL",
    "SR 21 WB - PGL",
    "C BRG.",
    "B.F.P.R."
  ],
  "description": "The crop shows two plan views of BENT 1, identified as BENT RIGHT and BENT LEFT, with a long rounded-end cap layout and beam centerlines. It documents beam locations, cap dimensions, skew geometry, bridge reference lines, and typical formed holes for smooth dowels."
}

p13_r01 title blockPlan

  • beam centerlineC BEAM 1 through C BEAM 12×12lineBeam centerlines are labeled C BEAM 1–6 at the left plan and C BEAM 7–12 at the right plan.

3 in. Dowel-hole diameter12 in. Dowel-hole depth1 1/2 in. Smooth dowel diameter81°-20'-05.0" Skew angle17+19.65 Station17+28.00 Station22'-0" Dimension1'-6" Dimension+11 more

Page 14

crop

p14_r01

page 14 · other_p14_r01
Original
p14_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap",
      "tag": "C BENT",
      "shape": "rectangular, skewed in plan",
      "material": "",
      "count": 2,
      "note": "Shown as BENT 2 LEFT and BENT 2 RIGHT."
    },
    {
      "name": "beam centerline",
      "tag": "C BEAM 1–6",
      "shape": "line",
      "material": "",
      "count": 6,
      "note": "Visible beneath BENT 2 LEFT."
    },
    {
      "name": "beam centerline",
      "tag": "C BEAM 7–12",
      "shape": "line",
      "material": "",
      "count": 6,
      "note": "Visible beneath BENT 2 RIGHT."
    },
    {
      "name": "bearing centerline",
      "tag": "C BEARING",
      "shape": "line",
      "material": "",
      "count": 2,
      "note": "One centerline shown through each bent cap."
    },
    {
      "name": "smooth dowel bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "Called out as formed for 1/2 in. diameter smooth dowel bar; one circular hole symbol is visible at each bent cap."
    }
  ],
  "measurements": [
    {
      "label": "roadway segment length",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "SR 21 WB = PGL"
    },
    {
      "label": "roadway segment length",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "SR 21 EB = PGL"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "SR 21"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "station",
      "value": "17+81.35",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "station",
      "value": "17+74.65",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "overall bent cap length",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "overall bent cap length",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "end dimension",
      "value": "2'-3⅜\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "end dimension",
      "value": "2'-3 5/16\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "end segment length",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "end segment length",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "beam spacing",
      "value": "7'-7 1/2\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "offset dimension",
      "value": "1'-9 3/8\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "offset dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "offset dimension",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "overall width dimension",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "BENT 2 LEFT"
    },
    {
      "label": "offset dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "offset dimension",
      "value": "2'-1 1/2\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "overall width dimension",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "BENT 2 RIGHT"
    },
    {
      "label": "dowel-bar hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "smooth dowel bar hole"
    },
    {
      "label": "dowel-bar hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "smooth dowel bar hole"
    },
    {
      "label": "smooth dowel bar diameter",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "smooth dowel bar"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1/2\" DIA. SMOOTH DOWEL BAR, TYP.",
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "C SR 21",
    "SR 21 EB = PGL",
    "STA. 17+81.35",
    "STA. 17+74.65",
    "PLAN",
    "BENT 2 LEFT",
    "BENT 2 RIGHT"
  ],
  "description": "This crop contains two plan views of Bent 2, identified as BENT 2 LEFT and BENT 2 RIGHT, on skewed SR 21 alignments. Each view shows a rectangular bent cap, bearing centerline, beam centerlines and dimension chains for the six beams at that side of the bent."
}

p14_r01Plan

  • beam centerlineC BEAM 1–6×6lineVisible beneath BENT 2 LEFT.
  • beam centerlineC BEAM 7–12×6lineVisible beneath BENT 2 RIGHT.

22'-0" roadway segment length22'-0" roadway segment length81°-20'-05.0" skew angle81°-20'-05.0" skew angle81°-20'-05.0" skew angle17+81.35 station17+74.65 station42'-6" overall bent cap length+19 more

Page 15

crop

p15_r01

page 15 · other_p15_r01
Original
p15_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap",
      "tag": "BENT 3",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Shown as separate left and right plan portions."
    },
    {
      "name": "beam centerline",
      "tag": "C BEAM 1–C BEAM 12",
      "shape": "linear",
      "material": "",
      "count": 12,
      "note": "Six beam centerlines are shown in each bent portion."
    },
    {
      "name": "bearing centerline",
      "tag": "C BEARING",
      "shape": "linear",
      "material": "",
      "count": null,
      "note": "Centerline callout shown; individual bearings are not distinctly detailed."
    },
    {
      "name": "smooth dowel bar",
      "tag": "",
      "shape": "cylindrical",
      "material": "",
      "count": null,
      "note": "Called out as typical in formed holes."
    }
  ],
  "measurements": [
    {
      "label": "station",
      "value": "18+63.35",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "station",
      "value": "18+56.65",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "roadway alignment length",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "SR 21 WB = PGL"
    },
    {
      "label": "roadway alignment length",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "SR 21 EB = PGL"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT, TYP."
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT, TYP."
    },
    {
      "label": "overall bent-cap length",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "overall bent-cap length",
      "value": "42'-6\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "end dimension",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "beam spacing",
      "value": "7'-7½\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "end dimension",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "end dimension",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "beam spacing",
      "value": "7'-7½\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "end dimension",
      "value": "6'-0\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "left end offset",
      "value": "2'-3⅜\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "right end offset",
      "value": "2'-3 5/16\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "left end offset",
      "value": "2'-3 5/16\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "beam centerline spacing",
      "value": "7'-7 1/16\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "right end offset",
      "value": "2'-3⅜\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "offset dimension",
      "value": "1'-9⅜\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "offset dimension",
      "value": "1'-9⅜\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "vertical dimension",
      "value": "2'-1½\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "vertical dimension",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "vertical dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "vertical dimension",
      "value": "2'-1½\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "vertical dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "2'-1½\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "vertical dimension",
      "value": "2'-1½\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "dowel-bar hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "smooth dowel bar hole"
    },
    {
      "label": "dowel-bar hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "smooth dowel bar hole"
    },
    {
      "label": "dowel-bar diameter",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "smooth dowel bar"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1/2\" DIA. SMOOTH DOWEL BAR, TYP.",
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SR 21 EB = PGL",
    "PLAN",
    "BENT 3 LEFT",
    "BENT 3 RIGHT",
    "STA. 18+63.35",
    "STA. 18+56.65",
    "P.I. NO. 001981",
    "GDOT"
  ],
  "description": "The crop contains plan views of BENT 3, shown as BENT 3 LEFT and BENT 3 RIGHT. Each portion shows a rectangular bent-cap layout with six beam centerlines, bearing-centerline callouts, skew geometry, stationing, and typical smooth-dowel-bar hole requirements."
}

p15_r01Plan

  • beam centerlineC BEAM 1–C BEAM 12×12linearSix beam centerlines are shown in each bent portion.

18+63.35 station18+56.65 station22'-0" roadway alignment length22'-0" roadway alignment length81°-20'-05.0" skew angle81°-20'-05.0" skew angle81°-20'-05.0" skew angle81°-20'-05.0" skew angle+29 more

Page 17

crop

p17_r01 title block

page 17 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p17_r01_title_block
Original
p17_r01 title block
{
  "view": "Plan",
  "objects": [
    {
      "name": "Bridge bent plan layout",
      "tag": "BENT 4 LEFT",
      "shape": "rectangular longitudinal layout with rounded end outlines",
      "material": "",
      "count": 1,
      "note": "Partial bent/beam layout shown; six beam centerlines are identified."
    },
    {
      "name": "Bridge bent plan layout",
      "tag": "BENT 4 RIGHT",
      "shape": "rectangular longitudinal layout with rounded end outlines",
      "material": "",
      "count": 1,
      "note": "Partial bent/beam layout shown; six beam centerlines are identified."
    },
    {
      "name": "Beam centerline locations",
      "tag": "℄ BEAM 1 through ℄ BEAM 12",
      "shape": "linear",
      "material": "",
      "count": 12,
      "note": "BEAM 1–6 are shown in the left plan and BEAM 7–12 in the right plan."
    },
    {
      "name": "Smooth dowel hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Called out as formed 3 in. diameter by 12 in. deep holes for 1/2 in. diameter smooth dowels, typical."
    }
  ],
  "measurements": [
    {
      "label": "Offset dimension",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "SR 21 WB = PCL to bent reference line"
    },
    {
      "label": "Offset dimension",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "SR 21 EB = PCL to bent reference line"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Station",
      "value": "19+18.35",
      "unit": "",
      "appliesTo": "SR 21 WB = PCL"
    },
    {
      "label": "Station",
      "value": "19+15.00",
      "unit": "",
      "appliesTo": "END BRIDGE B.F.P.R. BENT 4"
    },
    {
      "label": "Typical dimension",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Typical dimension",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "B.F.P.R. / ℄ BRG. offset"
    },
    {
      "label": "Dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "B.F.P.R. / ℄ BRG. offset"
    },
    {
      "label": "Dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Typical dimension",
      "value": "3¾\"",
      "unit": "",
      "appliesTo": "Beam layout"
    },
    {
      "label": "Typical beam centerline spacing",
      "value": "7'-7 7/16\"",
      "unit": "",
      "appliesTo": "Beam centerlines"
    },
    {
      "label": "End beam-layout dimension",
      "value": "3'-0 7/8\"",
      "unit": "",
      "appliesTo": "Outer beam centerline locations"
    },
    {
      "label": "Dimension",
      "value": "5'-4 1/4\"",
      "unit": "",
      "appliesTo": "End portion of each bent plan"
    },
    {
      "label": "Dimension",
      "value": "2'-9 3/4\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "End segment dimension",
      "value": "6'-10 1/2\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Intermediate segment dimension",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "End segment dimension",
      "value": "6'-10 9/16\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "Overall dimension",
      "value": "44'-1 1/16\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "End segment dimension",
      "value": "6'-10 1/2\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Intermediate segment dimension",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "End segment dimension",
      "value": "6'-10 9/16\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Overall dimension",
      "value": "44'-1 1/16\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "Hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "Smooth dowel hole"
    },
    {
      "label": "Hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "Smooth dowel hole"
    },
    {
      "label": "Dowel diameter",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "Smooth dowel"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1/2\" DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 3 BRIDGE SHEET 16",
    "SEE DETAIL 4 BRIDGE SHEET 16"
  ],
  "labels": [
    "AHEAD",
    "SR 21 WB = PCL",
    "SR 21 EB = PCL",
    "END BRIDGE B.F.P.R. BENT 4",
    "B.F.P.R.",
    "℄ BRG.",
    "PLAN",
    "(BENT 4 LEFT)",
    "(BENT 4 RIGHT)"
  ],
  "description": "The crop contains two plan views of BENT 4, identified as BENT 4 LEFT and BENT 4 RIGHT. Each plan shows the beam centerline layout, with BEAM 1 through BEAM 12 identified across the two views, bent geometry dimensions, skew information, and dowel-hole/detail callouts."
}

p17_r01 title blockPlan

  • Beam centerline locations℄ BEAM 1 through ℄ BEAM 12×12linearBEAM 1–6 are shown in the left plan and BEAM 7–12 in the right plan.

22'-0" Offset dimension22'-0" Offset dimension81°-20'-05.0" Skew angle81°-20'-05.0" Skew angle19+18.35 Station19+15.00 Station81°-20'-05.0" Typical dimension81°-20'-05.0" Typical dimension+22 more

crop

p17_r01

page 17 · other_p17_r01
Original
p17_r01
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent cap",
      "tag": "BENT 4 LEFT",
      "shape": "rectangular with tapered end returns",
      "material": "",
      "count": 1,
      "note": "Shown in plan with six beam centerlines."
    },
    {
      "name": "bent cap",
      "tag": "BENT 4 RIGHT",
      "shape": "rectangular with tapered end returns",
      "material": "",
      "count": 1,
      "note": "Shown in plan with six beam centerlines."
    },
    {
      "name": "beam centerline locations",
      "tag": "BEAM 1–6",
      "shape": "",
      "material": "",
      "count": 6,
      "note": "Centerlines only are shown in the left bent plan."
    },
    {
      "name": "beam centerline locations",
      "tag": "BEAM 7–12",
      "shape": "",
      "material": "",
      "count": 6,
      "note": "Centerlines only are shown in the right bent plan."
    },
    {
      "name": "smooth dowel",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Callout identifies a typical 1½ in. diameter dowel in a formed hole."
    }
  ],
  "measurements": [
    {
      "label": "dowel hole diameter",
      "value": "3\"",
      "unit": "",
      "appliesTo": "smooth dowel hole"
    },
    {
      "label": "dowel hole depth",
      "value": "12\"",
      "unit": "",
      "appliesTo": "smooth dowel hole"
    },
    {
      "label": "smooth dowel diameter",
      "value": "1½\"",
      "unit": "",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT; TYP."
    },
    {
      "label": "skew angle",
      "value": "81°-20'-05.0\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT; TYP."
    },
    {
      "label": "longitudinal dimension",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "left side of center bridge reference"
    },
    {
      "label": "longitudinal dimension",
      "value": "22'-0\"",
      "unit": "",
      "appliesTo": "right side of center bridge reference"
    },
    {
      "label": "station",
      "value": "19+18.35",
      "unit": "",
      "appliesTo": "SR 21 WB = PGL"
    },
    {
      "label": "station",
      "value": "19+15.00",
      "unit": "",
      "appliesTo": "END BRIDGE B.F.P.R. BENT 4"
    },
    {
      "label": "dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "dimension",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "dimension",
      "value": "2¾\"",
      "unit": "",
      "appliesTo": "BENT 4; TYP."
    },
    {
      "label": "dimension",
      "value": "2'-9⅜\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "dimension",
      "value": "2'-9⅜\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "dimension",
      "value": "5'-4¾\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "dimension",
      "value": "5'-4¾\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "end offset",
      "value": "3'-0⅞\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT; two printed occurrences"
    },
    {
      "label": "beam centerline spacing",
      "value": "7'-7¹⁄₁₆\"",
      "unit": "",
      "appliesTo": "BEAM 1–6; five printed occurrences"
    },
    {
      "label": "end offset",
      "value": "6'-10½\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "beam spacing",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT; four printed occurrences"
    },
    {
      "label": "end offset",
      "value": "6'-10⁹⁄₁₆\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "overall width",
      "value": "44'-1¹⁄₁₆\"",
      "unit": "",
      "appliesTo": "BENT 4 LEFT"
    },
    {
      "label": "end offset",
      "value": "3'-0⅞\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT; two printed occurrences"
    },
    {
      "label": "beam centerline spacing",
      "value": "7'-7¹⁄₁₆\"",
      "unit": "",
      "appliesTo": "BEAM 7–12; five printed occurrences"
    },
    {
      "label": "end offset",
      "value": "6'-10½\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "beam spacing",
      "value": "7'-7\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT; four printed occurrences"
    },
    {
      "label": "end offset",
      "value": "6'-10⁹⁄₁₆\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    },
    {
      "label": "overall width",
      "value": "44'-1¹⁄₁₆\"",
      "unit": "",
      "appliesTo": "BENT 4 RIGHT"
    }
  ],
  "notes": [
    "FORM 3” DIA. X 12” DEEP HOLE FOR 1½” DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 3 BRIDGE SHEET 16",
    "SEE DETAIL 4 BRIDGE SHEET 16"
  ],
  "labels": [
    "B.F.P.R.",
    "SR 21 WB = PGL",
    "SR 21 EB = PGL",
    "℄ SR 21",
    "℄ BRG.",
    "END BRIDGE B.F.P.R. BENT 4",
    "PLAN",
    "(BENT 4 LEFT)",
    "(BENT 4 RIGHT)"
  ],
  "description": "This crop shows plan views of Bent 4, divided into BENT 4 LEFT and BENT 4 RIGHT. Each plan shows a skewed bent-cap outline, beam centerline locations for twelve total beams, dimensions, roadway PGL references, and typical smooth-dowel hole callouts."
}

p17_r01Plan

  • beam centerline locationsBEAM 1–6×6Centerlines only are shown in the left bent plan.
  • beam centerline locationsBEAM 7–12×6Centerlines only are shown in the right bent plan.

3" dowel hole diameter12" dowel hole depth1½" smooth dowel diameter81°-20'-05.0" skew angle81°-20'-05.0" skew angle22'-0" longitudinal dimension22'-0" longitudinal dimension19+18.35 station+24 more

Page 18

crop

p18_r01 footing 3

page 18 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p18_r01_footing_3
Original
p18_r01 footing 3
{
  "view": "Plan",
  "objects": [
    {
      "name": "bent",
      "tag": "BENT 1",
      "shape": "long narrow rectangular strip divided at beam centerlines",
      "material": "",
      "count": 2,
      "note": "Shown as BENT 1 LEFT and BENT 1 RIGHT."
    },
    {
      "name": "bent",
      "tag": "BENT 4",
      "shape": "long narrow rectangular strip divided at beam centerlines",
      "material": "",
      "count": 2,
      "note": "Shown as BENT 4 LEFT and BENT 4 RIGHT."
    },
    {
      "name": "footing",
      "tag": "FOOTING 1",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One shown at BENT 2 LEFT and one at BENT 3 LEFT."
    },
    {
      "name": "footing",
      "tag": "FOOTING 2",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One shown at BENT 2 LEFT and one at BENT 3 LEFT."
    },
    {
      "name": "footing",
      "tag": "FOOTING 3",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One shown at BENT 2 RIGHT and one at BENT 3 RIGHT."
    },
    {
      "name": "footing",
      "tag": "FOOTING 4",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One shown at BENT 2 RIGHT and one at BENT 3 RIGHT."
    },
    {
      "name": "footing",
      "tag": "",
      "shape": "partial rectangular",
      "material": "",
      "count": null,
      "note": "Partial footing-related plan is cut off at the upper-right edge; callout reads only \"FOOTI\"."
    },
    {
      "name": "pile location",
      "tag": "PILE NO. 1–12",
      "shape": "H-like pile symbol",
      "material": "",
      "count": 48,
      "note": "Six pile symbols are shown in each complete footing plan; pile numbers repeat between the illustrated bent plans."
    },
    {
      "name": "beam centerline",
      "tag": "℄ BEAM 1–12",
      "shape": "centerline",
      "material": "",
      "count": 12,
      "note": "Beam centerlines are identified alongside the BENT 1 and BENT 4 strips."
    }
  ],
  "measurements": [],
  "notes": [],
  "labels": [
    "BENT 1 LEFT",
    "BENT 2 LEFT",
    "BENT 3 LEFT",
    "BENT 4 LEFT",
    "BENT 1 RIGHT",
    "BENT 2 RIGHT",
    "BENT 3 RIGHT",
    "BENT 4 RIGHT",
    "B.F.P.R. BENT 1",
    "℄ BENT 2",
    "℄ BENT 3",
    "B.F.P.R. BENT 4",
    "℄ SR 21",
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "3 RIGHT",
    "FOOTI (partial)"
  ],
  "description": "This crop is a foundation and bent layout plan showing left and right arrangements for Bents 1 through 4. Bents 2 and 3 show rectangular Footings 1 through 4 with numbered pile locations, while Bents 1 and 4 show beam centerline positions 1 through 12. A partial pile-tip-elevation schedule for BENT 3 RIGHT and a cut-off footing-related plan are visible at the right edge."
}

p18_r01 footing 3Plan

  • beam centerline℄ BEAM 1–12×12centerlineBeam centerlines are identified alongside the BENT 1 and BENT 4 strips.