Drawing → BOQ
← Mindmapwhat the drawings said

Beveled Shim Plate

1 page · 6 crops · ×4 · superstructure

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a shim plate component class.

How the sheets named it

Beveled shim platesbeveled shim plates

Every dimension read for it12

  • L+2″shim plate overall lengthp12 · p12_r03 section a a
  • (L+2″)/2shim plate half lengthp12 · p12_r03 section a a
  • (L+2″)/2shim plate half lengthp12 · p12_r03 section a a
  • W+2″shim plate overall widthp12 · p12_r03 section a a
  • (W+2″)/2shim plate half widthp12 · p12_r03 section a a
  • (W+2″)/2shim plate half widthp12 · p12_r03 section a a
  • 1″shim plate thicknessp12 · p12_r01
  • L+2”beveled shim plate overall lengthp12 · p12_r03
  • (L+2”)/2beveled shim plate half lengthp12 · p12_r03
  • W+2”beveled shim plate overall widthp12 · p12_r03
  • (W+2”)/2beveled shim plate half widthp12 · p12_r03
  • 3”beveled shim plate hole diameterp12 · p12_r03

Notes on the sheets that carry it

  • p12PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 OF THE GEORGIA DOT SPECIFICATIONS.
  • p12BENT 1 SHOWN
  • p12BENT 4 SIMILAR
  • p12ENDWALL NOT SHOWN
  • p1290°-00′-00″, TYP.
  • p123/16″ SEALING RIB, ALL AROUND
  • p12℄ BEARING PAD = ℄ 3″ DIAMETER HOLE
  • p12℄ BEVELED SHIM PLATE = ℄ 3″ DIAMETER HOLE
  • p129. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123.

Every crop it was read in — the drawing beside what the model took off it

Page 12

crop

p12_r01 in accordance with sub section 833 2 10

page 12 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p12_r01_in_accordance_with_sub_section_833_2_10
Original
p12_r01 in accordance with sub section 833 2 10
{
  "view": "Detail",
  "objects": [
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "Three parallel beam ends are shown in the left-hand view; a beam is also shown in Section A."
    },
    {
      "name": "endwall",
      "tag": "",
      "shape": "skewed rectangular",
      "material": "",
      "count": 1,
      "note": "Shown at the beam ends in the left-hand view."
    },
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 3,
      "note": "Hatched pads are shown between the beam ends and endwall; also detailed in Section A."
    },
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "beveled plate",
      "material": "",
      "count": 1,
      "note": "Shown above the bearing pad in Section A."
    },
    {
      "name": "smooth dowel",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Vertical dowel shown through the bearing assembly in Section A."
    },
    {
      "name": "preformed foam joint filler",
      "tag": "",
      "shape": "rectangular",
      "material": "preformed foam",
      "count": null,
      "note": "Identified by hatch symbol and specification note."
    }
  ],
  "measurements": [
    {
      "label": "dimension",
      "value": "1\"",
      "unit": "",
      "appliesTo": "bearing assembly"
    },
    {
      "label": "dimension",
      "value": "5/8\"",
      "unit": "",
      "appliesTo": "beveled shim plate / bearing assembly"
    },
    {
      "label": "dowel embedment dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "diameter",
      "value": "1 1/2\"",
      "unit": "",
      "appliesTo": "smooth dowel"
    }
  ],
  "notes": [
    "PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 OF THE GEORGIA DOT SPECIFICATIONS."
  ],
  "labels": [
    "℄ BEARING PAD =",
    "℄ BEVELED SHIM PLATE",
    "℄ BEARING",
    "℄ BEAM",
    "B.F.P.R.",
    "ENDWALL",
    "A"
  ],
  "description": "This crop shows a skewed endwall and beam-end bearing arrangement, with three beam ends visible in the left-hand view. Section A details the beam supported on a bearing pad and beveled shim plate, with a 1 1/2-inch diameter smooth dowel and preformed foam joint filler requirement."
}

p12_r01 in accordance with sub section 833 2 10Detail

  • beveled shim plate×1beveled plateShown above the bearing pad in Section A.

1" dimension5/8" dimension1'-0" dowel embedment dimension1 1/2" diameter

crop

p12_r03 section a a

page 12 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p12_r03_section_a_a
Original
p12_r03 section a a
{
  "view": "Plan",
  "objects": [
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown in left plan with a central circular hole and perimeter sealing rib."
    },
    {
      "name": "sealing rib",
      "tag": "",
      "shape": "rectangular perimeter rib",
      "material": "",
      "count": 1,
      "note": "Continuous around bearing pad."
    },
    {
      "name": "bearing pad hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Central hole in bearing pad."
    },
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown in right plan with a central circular hole."
    },
    {
      "name": "shim plate hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Central hole in beveled shim plate."
    }
  ],
  "measurements": [
    {
      "label": "bearing pad overall length",
      "value": "L",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "bearing pad half length",
      "value": "L/2",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "bearing pad half length",
      "value": "L/2",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "bearing pad overall width",
      "value": "W",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "bearing pad half width",
      "value": "W/2",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "bearing pad half width",
      "value": "W/2",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "sealing rib size",
      "value": "3/16″",
      "unit": "",
      "appliesTo": "sealing rib"
    },
    {
      "label": "bearing pad hole diameter",
      "value": "3″",
      "unit": "",
      "appliesTo": "bearing pad hole"
    },
    {
      "label": "angle",
      "value": "90°-00′-00″",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "shim plate overall length",
      "value": "L+2″",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "shim plate half length",
      "value": "(L+2″)/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "shim plate half length",
      "value": "(L+2″)/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "shim plate overall width",
      "value": "W+2″",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "shim plate half width",
      "value": "(W+2″)/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "shim plate half width",
      "value": "(W+2″)/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "shim plate hole diameter",
      "value": "3″",
      "unit": "",
      "appliesTo": "shim plate hole"
    }
  ],
  "notes": [
    "BENT 1 SHOWN",
    "BENT 4 SIMILAR",
    "ENDWALL NOT SHOWN",
    "90°-00′-00″, TYP.",
    "3/16″ SEALING RIB, ALL AROUND",
    "℄ BEARING PAD = ℄ 3″ DIAMETER HOLE",
    "℄ BEVELED SHIM PLATE = ℄ 3″ DIAMETER HOLE"
  ],
  "labels": [
    "PLAN",
    "SECTION A-A",
    "PLAN",
    "℄ BEAM",
    "B",
    "B"
  ],
  "description": "This crop shows plan details for a rectangular bearing pad at Bent 1, with Bent 4 noted as similar, and for a rectangular beveled shim plate. Both items are centered on the beam centerline and include a central 3-inch-diameter hole; the bearing pad also has a 3/16-inch sealing rib all around."
}

p12_r03 section a aPlan

  • beveled shim plate×1rectangularShown in right plan with a central circular hole.

L bearing pad overall lengthL/2 bearing pad half lengthL/2 bearing pad half lengthW bearing pad overall widthW/2 bearing pad half widthW/2 bearing pad half width3/16″ sealing rib size3″ bearing pad hole diameter+8 more

crop

p12_r06 notes

page 12 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p12_r06_notes
Original
p12_r06 notes
{
  "view": "Notes",
  "objects": [
    {
      "name": "Beveled shim plates",
      "tag": "",
      "shape": "beveled",
      "material": "ASTM A709 Grade 36 steel, galvanized",
      "count": null,
      "note": "Shall be galvanized in accordance with ASTM A123."
    }
  ],
  "measurements": [],
  "notes": [
    "9. BEVELED SHIM PLATES SHALL BE ASTM A709 GRADE 36 AND SHALL BE GALVANIZED IN ACCORDANCE WITH ASTM A123."
  ],
  "labels": [],
  "description": "This crop contains Note 9 regarding material and galvanizing requirements for beveled shim plates. No dimensions, quantities, or detail geometry are shown."
}

p12_r06 notesNotes

  • Beveled shim platesbeveledASTM A709 Grade 36 steel, galvanizedShall be galvanized in accordance with ASTM A123.
crop

p12_r07 table

page 12 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p12_r07_table
Original
p12_r07 table
{
  "view": "Table",
  "objects": [
    {
      "name": "bearing pads",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Scheduled by bent location."
    },
    {
      "name": "beveled shim plates",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Shim thicknesses T₁ and T₂ are scheduled only for Bents 1 and 4."
    }
  ],
  "measurements": [
    {
      "label": "W, Bent 1 bearing pad",
      "value": "16″",
      "unit": "″",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "L, Bent 1 bearing pad",
      "value": "12″",
      "unit": "″",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "T, Bent 1 bearing pad",
      "value": "4″",
      "unit": "″",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Number of internal plate(s), Bent 1",
      "value": "3",
      "unit": "",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Design shear deflection, Bent 1",
      "value": "3/8″",
      "unit": "″",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Dead load, Bent 1",
      "value": "55",
      "unit": "KIPS",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Live load (no impact), Bent 1",
      "value": "63",
      "unit": "KIPS",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "Dead load + live load, Bent 1",
      "value": "118",
      "unit": "KIPS",
      "appliesTo": "Bent 1 bearing pad"
    },
    {
      "label": "T₁, Bent 1 beveled shim plate",
      "value": "1/4″",
      "unit": "″",
      "appliesTo": "Bent 1 beveled shim plate"
    },
    {
      "label": "T₂, Bent 1 beveled shim plate",
      "value": "1/2″",
      "unit": "″",
      "appliesTo": "Bent 1 beveled shim plate"
    },
    {
      "label": "W, Bent 2 BACK bearing pad",
      "value": "16″",
      "unit": "″",
      "appliesTo": "Bent 2 BACK bearing pad"
    },
    {
      "label": "L, Bent 2 BACK bearing pad",
      "value": "12″",
      "unit": "″",
      "appliesTo": "Bent 2 BACK bearing pad"
    },
    {
      "label": "T, Bent 2 BACK bearing pad",
      "value": "4″",
      "unit": "″",
      "appliesTo": "Bent 2 BACK bearing pad"
    },
    {
      "label": "Number of internal plate(s), Bent 2 BACK",
      "value": "3",
      "unit": "",
      "appliesTo": "Bent 2 BACK bearing pad"
    },
    {
      "label": "Design shear deflection, Bent 2 BACK",
      "value": "0",
      "unit": "",
      "appliesTo": "Bent 2 BACK bearing pad"
    },
    {
      "label": "Dead load, Bent 2 BACK",
      "value": "47",
      "unit": "KIPS",
      "appliesTo": "Bent 2 BACK bearing pad"
    },
    {
      "label": "Live load (no impact), Bent 2 BACK",
      "value": "61",
      "unit": "KIPS",
      "appliesTo": "Bent 2 BACK bearing pad"
    },
    {
      "label": "Dead load + live load, Bent 2 BACK",
      "value": "108",
      "unit": "KIPS",
      "appliesTo": "Bent 2 BACK bearing pad"
    },
    {
      "label": "W, Bent 2 AHEAD bearing pad",
      "value": "18″",
      "unit": "″",
      "appliesTo": "Bent 2 AHEAD bearing pad"
    },
    {
      "label": "L, Bent 2 AHEAD bearing pad",
      "value": "10″",
      "unit": "″",
      "appliesTo": "Bent 2 AHEAD bearing pad"
    },
    {
      "label": "T, Bent 2 AHEAD bearing pad",
      "value": "1¾″",
      "unit": "″",
      "appliesTo": "Bent 2 AHEAD bearing pad"
    },
    {
      "label": "Number of internal plate(s), Bent 2 AHEAD",
      "value": "1",
      "unit": "",
      "appliesTo": "Bent 2 AHEAD bearing pad"
    },
    {
      "label": "Design shear deflection, Bent 2 AHEAD",
      "value": "0",
      "unit": "",
      "appliesTo": "Bent 2 AHEAD bearing pad"
    },
    {
      "label": "Dead load, Bent 2 AHEAD",
      "value": "79",
      "unit": "KIPS",
      "appliesTo": "Bent 2 AHEAD bearing pad"
    },
    {
      "label": "Live load (no impact), Bent 2 AHEAD",
      "value": "71",
      "unit": "KIPS",
      "appliesTo": "Bent 2 AHEAD bearing pad"
    },
    {
      "label": "Dead load + live load, Bent 2 AHEAD",
      "value": "150",
      "unit": "KIPS",
      "appliesTo": "Bent 2 AHEAD bearing pad"
    },
    {
      "label": "W, Bent 3 BACK bearing pad",
      "value": "18″",
      "unit": "″",
      "appliesTo": "Bent 3 BACK bearing pad"
    },
    {
      "label": "L, Bent 3 BACK bearing pad",
      "value": "10″",
      "unit": "″",
      "appliesTo": "Bent 3 BACK bearing pad"
    },
    {
      "label": "T, Bent 3 BACK bearing pad",
      "value": "1¾″",
      "unit": "″",
      "appliesTo": "Bent 3 BACK bearing pad"
    },
    {
      "label": "Number of internal plate(s), Bent 3 BACK",
      "value": "1",
      "unit": "",
      "appliesTo": "Bent 3 BACK bearing pad"
    },
    {
      "label": "Design shear deflection, Bent 3 BACK",
      "value": "1/2″",
      "unit": "″",
      "appliesTo": "Bent 3 BACK bearing pad"
    },
    {
      "label": "Dead load, Bent 3 BACK",
      "value": "79",
      "unit": "KIPS",
      "appliesTo": "Bent 3 BACK bearing pad"
    },
    {
      "label": "Live load (no impact), Bent 3 BACK",
      "value": "71",
      "unit": "KIPS",
      "appliesTo": "Bent 3 BACK bearing pad"
    },
    {
      "label": "Dead load + live load, Bent 3 BACK",
      "value": "150",
      "unit": "KIPS",
      "appliesTo": "Bent 3 BACK bearing pad"
    },
    {
      "label": "W, Bent 3 AHEAD bearing pad",
      "value": "16″",
      "unit": "″",
      "appliesTo": "Bent 3 AHEAD bearing pad"
    },
    {
      "label": "L, Bent 3 AHEAD bearing pad",
      "value": "12″",
      "unit": "″",
      "appliesTo": "Bent 3 AHEAD bearing pad"
    },
    {
      "label": "T, Bent 3 AHEAD bearing pad",
      "value": "4″",
      "unit": "″",
      "appliesTo": "Bent 3 AHEAD bearing pad"
    },
    {
      "label": "Number of internal plate(s), Bent 3 AHEAD",
      "value": "3",
      "unit": "",
      "appliesTo": "Bent 3 AHEAD bearing pad"
    },
    {
      "label": "Design shear deflection, Bent 3 AHEAD",
      "value": "1/2″",
      "unit": "″",
      "appliesTo": "Bent 3 AHEAD bearing pad"
    },
    {
      "label": "Dead load, Bent 3 AHEAD",
      "value": "47",
      "unit": "KIPS",
      "appliesTo": "Bent 3 AHEAD bearing pad"
    },
    {
      "label": "Live load (no impact), Bent 3 AHEAD",
      "value": "61",
      "unit": "KIPS",
      "appliesTo": "Bent 3 AHEAD bearing pad"
    },
    {
      "label": "Dead load + live load, Bent 3 AHEAD",
      "value": "108",
      "unit": "KIPS",
      "appliesTo": "Bent 3 AHEAD bearing pad"
    },
    {
      "label": "W, Bent 4 bearing pad",
      "value": "16″",
      "unit": "″",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "L, Bent 4 bearing pad",
      "value": "12″",
      "unit": "″",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "T, Bent 4 bearing pad",
      "value": "4″",
      "unit": "″",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Number of internal plate(s), Bent 4",
      "value": "3",
      "unit": "",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Design shear deflection, Bent 4",
      "value": "7/8″",
      "unit": "″",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Dead load, Bent 4",
      "value": "55",
      "unit": "KIPS",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Live load (no impact), Bent 4",
      "value": "63",
      "unit": "KIPS",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "Dead load + live load, Bent 4",
      "value": "118",
      "unit": "KIPS",
      "appliesTo": "Bent 4 bearing pad"
    },
    {
      "label": "T₁, Bent 4 beveled shim plate",
      "value": "1/2″",
      "unit": "″",
      "appliesTo": "Bent 4 beveled shim plate"
    },
    {
      "label": "T₂, Bent 4 beveled shim plate",
      "value": "1/4″",
      "unit": "″",
      "appliesTo": "Bent 4 beveled shim plate"
    }
  ],
  "notes": [],
  "labels": [
    "BENT",
    "BEARING PADS",
    "W",
    "L",
    "T",
    "NUMBER OF INTERNAL PLATE(S)",
    "DESIGN SHEAR DEFLECTION",
    "DESIGN LOADS (KIPS)",
    "DEAD LOAD",
    "LIVE LOAD (NO IMPACT)",
    "DEAD LOAD + LIVE LOAD",
    "BEVELED SHIM PLATES",
    "T₁",
    "T₂"
  ],
  "description": "This crop is a bearing-pad and beveled-shim-plate schedule for Bents 1 through 4, including separate BACK and AHEAD entries at Bents 2 and 3. It tabulates bearing-pad dimensions, internal plates, design shear deflection, and design load values, with shim plate thicknesses shown for Bents 1 and 4."
}

p12_r07 tableTable

  • beveled shim platesShim thicknesses T₁ and T₂ are scheduled only for Bents 1 and 4.

16″ ″ W, Bent 1 bearing pad12″ ″ L, Bent 1 bearing pad4″ ″ T, Bent 1 bearing pad3 Number of internal plate(s), Bent 13/8″ ″ Design shear deflection, Bent 155 KIPS Dead load, Bent 163 KIPS Live load (no impact), Bent 1118 KIPS Dead load + live load, Bent 1+44 more

crop

p12_r01

page 12 · other_p12_r01
Original
p12_r01
{
  "view": "Detail",
  "objects": [
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "beveled rectangular plate",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "beam",
      "tag": "",
      "shape": "profiled",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "endwall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown as supporting the bearing assembly."
    },
    {
      "name": "smooth dowel",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 1,
      "note": "Vertical dowel through the bearing assembly."
    },
    {
      "name": "preformed foam joint filler",
      "tag": "",
      "shape": "",
      "material": "preformed foam",
      "count": 1,
      "note": "Hatched joint-filler material."
    }
  ],
  "measurements": [
    {
      "label": "shim plate thickness",
      "value": "1″",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "dowel projection dimension",
      "value": "5″",
      "unit": "",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "dowel embedment dimension",
      "value": "1′-0″",
      "unit": "",
      "appliesTo": "smooth dowel"
    },
    {
      "label": "dowel diameter",
      "value": "1 1/2″",
      "unit": "",
      "appliesTo": "smooth dowel"
    }
  ],
  "notes": [
    "PREFORMED FOAM JOINT FILLER SHALL BE IN ACCORDANCE WITH SUB-SECTION 833.2.10 OF THE GEORGIA DOT SPECIFICATIONS."
  ],
  "labels": [
    "℄ BEARING PAD =",
    "℄ BEVELED SHIM PLATE",
    "℄ BEARING",
    "℄ BEAM",
    "B.F.P.R.",
    "ENDWALL",
    "A",
    "BEVELED SHIM PLATE",
    "BEARING PAD"
  ],
  "description": "This crop shows a bearing/endwall detail, including a perspective depiction and Detail A section/elevation of the beam bearing assembly. The beam is supported at an endwall on a bearing pad and beveled shim plate, with a vertical smooth dowel and preformed foam joint filler indicated."
}

p12_r01Detail

  • beveled shim plate×1beveled rectangular plate

1″ shim plate thickness5″ dowel projection dimension1′-0″ dowel embedment dimension1 1/2″ dowel diameter

crop

p12_r03

page 12 · other_p12_r03
Original
p12_r03
{
  "view": "Plan",
  "objects": [
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular with circular hole",
      "material": "",
      "count": 1,
      "note": "Shown at Bent 1; Bent 4 similar. Has sealing rib all around."
    },
    {
      "name": "sealing rib",
      "tag": "",
      "shape": "continuous perimeter rib",
      "material": "",
      "count": 1,
      "note": "Around bearing pad."
    },
    {
      "name": "beveled shim plate",
      "tag": "",
      "shape": "rectangular with circular hole",
      "material": "",
      "count": 1,
      "note": "Endwall not shown."
    }
  ],
  "measurements": [
    {
      "label": "bearing pad overall length",
      "value": "L",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "bearing pad half length",
      "value": "L/2",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "bearing pad overall width",
      "value": "W",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "bearing pad half width",
      "value": "W/2",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "bearing pad alignment angle",
      "value": "90°-00'-00”",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "sealing rib size",
      "value": "3/16”",
      "unit": "",
      "appliesTo": "sealing rib"
    },
    {
      "label": "bearing pad hole diameter",
      "value": "3”",
      "unit": "",
      "appliesTo": "bearing pad"
    },
    {
      "label": "beveled shim plate overall length",
      "value": "L+2”",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "beveled shim plate half length",
      "value": "(L+2”)/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "beveled shim plate overall width",
      "value": "W+2”",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "beveled shim plate half width",
      "value": "(W+2”)/2",
      "unit": "",
      "appliesTo": "beveled shim plate"
    },
    {
      "label": "beveled shim plate hole diameter",
      "value": "3”",
      "unit": "",
      "appliesTo": "beveled shim plate"
    }
  ],
  "notes": [
    "90°-00'-00”, TYP.",
    "3/16” SEALING RIB, ALL AROUND",
    "℄ BEARING PAD = ℄ 3” DIAMETER HOLE",
    "℄ BEVELED SHIM PLATE = ℄ 3” DIAMETER HOLE",
    "ENDWALL NOT SHOWN"
  ],
  "labels": [
    "PLAN",
    "BENT 1 SHOWN",
    "BENT 4 SIMILAR",
    "℄ BEAM",
    "B",
    "SECTION A-A"
  ],
  "description": "This crop shows plan details of a rectangular bearing pad and a rectangular beveled shim plate, each centered on a circular 3-inch-diameter hole. The bearing pad is shown for Bent 1, with Bent 4 noted as similar; the shim plate is associated with Section A-A, with the endwall not shown."
}

p12_r03Plan

  • beveled shim plate×1rectangular with circular holeEndwall not shown.

L bearing pad overall lengthL/2 bearing pad half lengthW bearing pad overall widthW/2 bearing pad half width90°-00'-00” bearing pad alignment angle3/16” sealing rib size3” bearing pad hole diameterL+2” beveled shim plate overall length+4 more