Drawing → BOQ
← Mindmapwhat the drawings said

Diaphragm Bar Hole

2 pages · 4 crops · ×8 · superstructure

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a diaphragm bar hole component class.

Every dimension read for it7

  • 2"Diaphragm bar hole diameterp10 · p10_r01 notes
  • 6⅞"Hole location dimensionp10 · p10_r01 notes
  • 6⅞"Hole location dimensionp10 · p10_r01 notes
  • 2"Diaphragm bar hole diameterp10 · p10_r01
  • 9"Vertical dimension to diaphragm bar holep10 · p10_r01
  • 6⅞"Hole spacing each sidep10 · p10_r01
  • 2"hole diameterp11 · p11_r01 notes

Notes on the sheets that carry it

  • p10MIDPOINT, DETAILS SYMMETRICAL ABOUT MIDPOINT UNLESS NOTED
  • p10℄ 2" DIAMETER HOLE FOR DIAPHRAGM BAR
  • p10OMIT HOLE AT BEAMS 1 AND 7
  • p10OMIT HOLE AT BEAMS 6 AND 12
  • p10ALL DIMENSIONS ARE ALONG ℄ BEAM
  • p11ΔNC = 1/4"
  • p11ΔC = 1/8"

Every crop it was read in — the drawing beside what the model took off it

Page 10

crop

p10_r01 notes

page 10 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p10_r01_notes
Original
p10_r01 notes
{
  "view": "Elevation",
  "objects": [
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular side elevation with tapered end profile partly visible at right",
      "material": "",
      "count": 1,
      "note": "Main beam elevation; right-hand cross-section is only partially shown."
    },
    {
      "name": "diaphragm bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "One note directs omission at beams 1 and 7; another directs omission at beams 6 and 12."
    },
    {
      "name": "draped strands",
      "tag": "",
      "shape": "draped line",
      "material": "",
      "count": 6,
      "note": "Shown within the beam elevation."
    },
    {
      "name": "reinforcement bars",
      "tag": "2-550 AT EACH LOCATION",
      "shape": "line",
      "material": "",
      "count": null,
      "note": "Repeated at each indicated location."
    },
    {
      "name": "reinforcement bars",
      "tag": "2-450",
      "shape": "line",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bars",
      "tag": "10-350 AT 6\"",
      "shape": "line",
      "material": "",
      "count": 10,
      "note": ""
    },
    {
      "name": "reinforcement bars",
      "tag": "2-651 AT EACH LOCATION",
      "shape": "line",
      "material": "",
      "count": null,
      "note": "Repeated at each indicated location."
    },
    {
      "name": "reinforcement bars",
      "tag": "2-452",
      "shape": "line",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "low friction type hold down",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Located at the indicated centerline."
    }
  ],
  "measurements": [
    {
      "label": "SPAN LENGTH",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "BEAM LENGTH",
      "value": "53'-7⅝\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Midpoint to indicated location",
      "value": "26'-9¹³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Indicated spacing",
      "value": "9³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Spacing",
      "value": "3 SPACES AT 24\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Spacing",
      "value": "18 SPACES AT 12\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Spacing",
      "value": "4\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Spacing",
      "value": "3 SPACES AT 4\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Spacing",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Diaphragm bar hole diameter",
      "value": "2\"",
      "unit": "",
      "appliesTo": "diaphragm bar hole"
    },
    {
      "label": "Vertical dimension",
      "value": "1'-9\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Hole location dimension",
      "value": "6⅞\"",
      "unit": "",
      "appliesTo": "diaphragm bar hole"
    },
    {
      "label": "Hole location dimension",
      "value": "6⅞\"",
      "unit": "",
      "appliesTo": "diaphragm bar hole"
    },
    {
      "label": "Reinforcement spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "10-350 AT 6\""
    },
    {
      "label": "Left bearing offset",
      "value": "10³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Left bearing offset",
      "value": "8\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Left end dimension",
      "value": "1'-6³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Bearing to bearing",
      "value": "52'-3⅝\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Right bearing offset",
      "value": "8\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Right bearing offset",
      "value": "6³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Right end dimension",
      "value": "1'-2³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Partial section dimension",
      "value": "5\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Partial section dimension",
      "value": "2½\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Partial section dimension",
      "value": "6\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Partial section spacing",
      "value": "2 SPACES AT 2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Partial section dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Partial section dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Camber tolerance",
      "value": "½\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Camber tolerance",
      "value": "1⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    }
  ],
  "notes": [
    "MIDPOINT, DETAILS SYMMETRICAL ABOUT MIDPOINT UNLESS NOTED",
    "℄ 2\" DIAMETER HOLE FOR DIAPHRAGM BAR",
    "OMIT HOLE AT BEAMS 1 AND 7",
    "OMIT HOLE AT BEAMS 6 AND 12",
    "ALL DIMENSIONS ARE ALONG ℄ BEAM"
  ],
  "labels": [
    "B.F.P.R.",
    "℄ BENT",
    "℄ BEARING",
    "℄ LOW FRICTION TYPE HOLD DOWN",
    "NOTES",
    "ELEVATION"
  ],
  "description": "This crop shows the elevation of a beam, dimensioned between bearing centerlines and bent centerline, with strand and reinforcing-bar callouts. A partial beam cross-section is visible at the far right, but it is cropped and does not show the full section."
}

p10_r01 notesElevation

  • diaphragm bar hole×2circularOne note directs omission at beams 1 and 7; another directs omission at beams 6 and 12.

55'-0" SPAN LENGTH53'-7⅝" BEAM LENGTH26'-9¹³⁄₁₆" Midpoint to indicated location9³⁄₁₆" Indicated spacing3 SPACES AT 24" Spacing6" Spacing18 SPACES AT 12" Spacing4" Spacing+22 more

crop

p10_r01

page 10 · other_p10_r01
Original
p10_r01
{
  "view": "Elevation",
  "objects": [
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Longitudinal elevation of a beam; a partial adjacent section is visible at the right edge."
    },
    {
      "name": "diaphragm bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "Called out as 2 inch diameter holes."
    },
    {
      "name": "reinforcement bars",
      "tag": "2-550",
      "shape": "straight",
      "material": "",
      "count": 2,
      "note": "At each location."
    },
    {
      "name": "reinforcement bars",
      "tag": "2-450",
      "shape": "straight",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bars",
      "tag": "2-651",
      "shape": "straight",
      "material": "",
      "count": 2,
      "note": "At each location."
    },
    {
      "name": "reinforcement bars",
      "tag": "10-350",
      "shape": "straight",
      "material": "",
      "count": 10,
      "note": "At 6 inch spacing."
    },
    {
      "name": "reinforcement bars",
      "tag": "2-452",
      "shape": "straight",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "draped strands",
      "tag": "",
      "shape": "draped",
      "material": "",
      "count": 6,
      "note": ""
    },
    {
      "name": "low friction type hold down",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Shown by centerline callout."
    }
  ],
  "measurements": [
    {
      "label": "Span length",
      "value": "55'-0\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Beam length",
      "value": "53'-7⅝\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Midpoint dimension",
      "value": "26'-9¹³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Dimension at midpoint",
      "value": "9¹³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Spacing",
      "value": "3 SPACES AT 24\"",
      "unit": "",
      "appliesTo": "reinforcement bars"
    },
    {
      "label": "Spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "reinforcement bars"
    },
    {
      "label": "Spacing",
      "value": "18 SPACES AT 12\"",
      "unit": "",
      "appliesTo": "reinforcement bars"
    },
    {
      "label": "Spacing",
      "value": "4\"",
      "unit": "",
      "appliesTo": "reinforcement bars"
    },
    {
      "label": "Spacing",
      "value": "3 SPACES AT 4\"",
      "unit": "",
      "appliesTo": "reinforcement bars"
    },
    {
      "label": "End dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Diaphragm bar hole diameter",
      "value": "2\"",
      "unit": "",
      "appliesTo": "diaphragm bar hole"
    },
    {
      "label": "Vertical dimension to diaphragm bar hole",
      "value": "9\"",
      "unit": "",
      "appliesTo": "diaphragm bar hole"
    },
    {
      "label": "Hole spacing each side",
      "value": "6⅞\"",
      "unit": "",
      "appliesTo": "diaphragm bar hole"
    },
    {
      "label": "ΔNC",
      "value": "½\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "ΔC",
      "value": "¹⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Reinforcement quantity",
      "value": "2-550",
      "unit": "",
      "appliesTo": "2-550"
    },
    {
      "label": "Reinforcement quantity",
      "value": "2-450",
      "unit": "",
      "appliesTo": "2-450"
    },
    {
      "label": "Reinforcement quantity",
      "value": "2-651",
      "unit": "",
      "appliesTo": "2-651"
    },
    {
      "label": "Reinforcement quantity and spacing",
      "value": "10-350 AT 6\"",
      "unit": "",
      "appliesTo": "10-350"
    },
    {
      "label": "Reinforcement quantity",
      "value": "2-452",
      "unit": "",
      "appliesTo": "2-452"
    },
    {
      "label": "Draped strand quantity",
      "value": "6",
      "unit": "",
      "appliesTo": "draped strands"
    },
    {
      "label": "Left bearing offset",
      "value": "10³⁄₁₆\"",
      "unit": "",
      "appliesTo": "℄ BEARING"
    },
    {
      "label": "Left bearing offset",
      "value": "8\"",
      "unit": "",
      "appliesTo": "℄ BEARING"
    },
    {
      "label": "Left end dimension",
      "value": "1'-6³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Bearing to bearing",
      "value": "52'-3⅝\"",
      "unit": "",
      "appliesTo": "℄ BEARING TO ℄ BEARING"
    },
    {
      "label": "Right bearing offset",
      "value": "8\"",
      "unit": "",
      "appliesTo": "℄ BEARING"
    },
    {
      "label": "Right bearing offset",
      "value": "6³⁄₁₆\"",
      "unit": "",
      "appliesTo": "℄ BEARING"
    },
    {
      "label": "Right end dimension",
      "value": "1'-2³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "Partial section dimension",
      "value": "5\"",
      "unit": "",
      "appliesTo": "partial section"
    },
    {
      "label": "Partial section dimension",
      "value": "2½\"",
      "unit": "",
      "appliesTo": "partial section"
    },
    {
      "label": "Partial section dimension",
      "value": "6\"",
      "unit": "",
      "appliesTo": "partial section"
    },
    {
      "label": "Partial section spacing",
      "value": "2 SPACES AT 2\"",
      "unit": "",
      "appliesTo": "partial section"
    },
    {
      "label": "Partial section dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "partial section"
    },
    {
      "label": "Partial section dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "partial section"
    }
  ],
  "notes": [
    "MIDPOINT, DETAILS SYMMETRICAL ABOUT MIDPOINT UNLESS NOTED",
    "℄ 2\" DIAMETER HOLE FOR DIAPHRAGM BAR",
    "OMIT HOLE AT BEAMS 6 AND 12",
    "OMIT HOLE AT BEAMS 1 AND 7",
    "ALL DIMENSIONS ARE ALONG ℄ BEAM"
  ],
  "labels": [
    "B.F.P.R.",
    "℄ BENT",
    "℄ BEARING",
    "℄ LOW FRICTION TYPE HOLD DOWN",
    "NOTES",
    "ELEVATION",
    "SECTION A (partial)"
  ],
  "description": "This crop shows the elevation of a longitudinal beam, with span, beam, bearing, reinforcement, strand, and diaphragm-hole information. A narrow partial cross-section of the beam is visible along the right edge, but it is cropped and does not show the complete section."
}

p10_r01Elevation

  • diaphragm bar hole×2circularCalled out as 2 inch diameter holes.

55'-0" Span length53'-7⅝" Beam length26'-9¹³⁄₁₆" Midpoint dimension9¹³⁄₁₆" Dimension at midpoint3 SPACES AT 24" Spacing6" Spacing18 SPACES AT 12" Spacing4" Spacing+26 more

Page 11

crop

p11_r01 notes

page 11 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p11_r01_notes
Original
p11_r01 notes
{
  "view": "Elevation",
  "objects": [
    {
      "name": "beam",
      "tag": "",
      "shape": "rectangular elevation; partial stepped cross-section at right",
      "material": "",
      "count": 1,
      "note": "Longitudinal beam elevation shown between Bent 2 and Bent 3; right-hand cross-section is cropped."
    },
    {
      "name": "diaphragm-bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "Called out as 2 in. diameter holes; omission callouts apply at specified beams."
    },
    {
      "name": "low friction type hold down",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Shown at the beam midpoint centerline."
    },
    {
      "name": "draped strands",
      "tag": "",
      "shape": "draped",
      "material": "",
      "count": 8,
      "note": "Callout reads 8 - DRAPED STRANDS."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-550",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "At each location."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-450",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "13-350",
      "shape": "linear",
      "material": "",
      "count": 13,
      "note": "At 6 in. spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-452",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bar",
      "tag": "2-650",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "At each location."
    },
    {
      "name": "reinforcement bars",
      "tag": "",
      "shape": "circular in partial cross-section",
      "material": "",
      "count": null,
      "note": "Bar dots are visible in the cropped right-hand beam cross-section."
    }
  ],
  "measurements": [
    {
      "label": "span length",
      "value": "82'-0\"",
      "unit": "",
      "appliesTo": "beam span"
    },
    {
      "label": "beam length",
      "value": "80'-11⅝\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "midpoint to beam end",
      "value": "40'-5¹³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "midpoint offset",
      "value": "11¹³⁄₁₆\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "spacing",
      "value": "9 SPACES AT 24\"",
      "unit": "",
      "appliesTo": "beam reinforcement"
    },
    {
      "label": "spacing",
      "value": "19 SPACES AT 12\"",
      "unit": "",
      "appliesTo": "beam reinforcement"
    },
    {
      "label": "spacing",
      "value": "4\"",
      "unit": "",
      "appliesTo": "beam reinforcement"
    },
    {
      "label": "spacing",
      "value": "6 SPACES AT 4\"",
      "unit": "",
      "appliesTo": "beam reinforcement"
    },
    {
      "label": "end dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam right end"
    },
    {
      "label": "bar quantity",
      "value": "2-550",
      "unit": "",
      "appliesTo": "reinforcement bar 2-550"
    },
    {
      "label": "bar quantity",
      "value": "2-450",
      "unit": "",
      "appliesTo": "reinforcement bar 2-450"
    },
    {
      "label": "bar quantity",
      "value": "8 - DRAPED STRANDS",
      "unit": "",
      "appliesTo": "draped strands"
    },
    {
      "label": "vertical dimension",
      "value": "8'-4 5/[illegible]\"",
      "unit": "",
      "appliesTo": "beam right end"
    },
    {
      "label": "bar spacing",
      "value": "13-350 AT 6\"",
      "unit": "",
      "appliesTo": "reinforcement bar 13-350"
    },
    {
      "label": "bar quantity",
      "value": "2-452",
      "unit": "",
      "appliesTo": "reinforcement bar 2-452"
    },
    {
      "label": "bar quantity",
      "value": "2-650",
      "unit": "",
      "appliesTo": "reinforcement bar 2-650"
    },
    {
      "label": "vertical dimension",
      "value": "2'-3\"",
      "unit": "",
      "appliesTo": "beam left portion"
    },
    {
      "label": "hole diameter",
      "value": "2\"",
      "unit": "",
      "appliesTo": "diaphragm-bar hole"
    },
    {
      "label": "dimension",
      "value": "6⅞\"",
      "unit": "",
      "appliesTo": "diaphragm-bar holes"
    },
    {
      "label": "dimension",
      "value": "6⅞\"",
      "unit": "",
      "appliesTo": "diaphragm-bar holes"
    },
    {
      "label": "ANC",
      "value": "1¼\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "ΔC",
      "value": "⅛\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "bearing offset",
      "value": "6³⁄₁₆\"",
      "unit": "",
      "appliesTo": "left bearing"
    },
    {
      "label": "bearing offset",
      "value": "8\"",
      "unit": "",
      "appliesTo": "left bearing"
    },
    {
      "label": "bearing offset",
      "value": "1'-2³⁄₁₆\"",
      "unit": "",
      "appliesTo": "left bearing"
    },
    {
      "label": "bearing to bearing",
      "value": "79'-7⅝\"",
      "unit": "",
      "appliesTo": "bearings"
    },
    {
      "label": "bearing offset",
      "value": "8\"",
      "unit": "",
      "appliesTo": "right bearing"
    },
    {
      "label": "bearing offset",
      "value": "6³⁄₁₆\"",
      "unit": "",
      "appliesTo": "right bearing"
    },
    {
      "label": "bearing offset",
      "value": "1'-2³⁄₁₆\"",
      "unit": "",
      "appliesTo": "right bearing"
    },
    {
      "label": "dimension",
      "value": "2⅝\"",
      "unit": "",
      "appliesTo": "beam right end"
    },
    {
      "label": "partial top width dimension",
      "value": "1'-4[partial]",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section"
    },
    {
      "label": "dimension",
      "value": "7\"",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section"
    },
    {
      "label": "dimension",
      "value": "2½\"",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section"
    },
    {
      "label": "dimension",
      "value": "7\"",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section"
    },
    {
      "label": "centerline dimension",
      "value": "1⅝\" CL.",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section"
    },
    {
      "label": "bar spacing",
      "value": "3 SPACES AT 2\"",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section reinforcement"
    },
    {
      "label": "dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section"
    },
    {
      "label": "dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section"
    },
    {
      "label": "bar spacing",
      "value": "9 SPACES AT [partial]",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section reinforcement"
    },
    {
      "label": "partial bottom width dimension",
      "value": "1'-1[partial]",
      "unit": "",
      "appliesTo": "cropped right-hand cross-section"
    }
  ],
  "notes": [
    "MIDPOINT, DETAILS SYMMETRICAL ABOUT MIDPOINT UNLESS NOTED",
    "℄ 2\" DIAMETER HOLE FOR DIAPHRAGM BAR",
    "OMIT HOLE AT BEAMS 6 AND 12",
    "OMIT HOLE AT BEAMS 1 AND 7",
    "ALL DIMENSIONS ARE ALONG ℄ BEAM"
  ],
  "labels": [
    "℄ BENT 2",
    "℄ BENT 3",
    "℄ BEARING",
    "℄ LOW FRICTION TYPE HOLD DOWN",
    "NOTES",
    "ELEVATION"
  ],
  "description": "This crop shows an elevation of a beam spanning from ℄ Bent 2 to ℄ Bent 3, including beam length, span length, bearing locations, midpoint, diaphragm-bar holes, hold down location, and reinforcing/strand callouts. A partial stepped beam cross-section with reinforcing bar dots and dimensions is visible at the far right, but it is cropped and incomplete."
}

p11_r01 notesElevation

  • diaphragm-bar hole×2circularCalled out as 2 in. diameter holes; omission callouts apply at specified beams.

82'-0" span length80'-11⅝" beam length40'-5¹³⁄₁₆" midpoint to beam end11¹³⁄₁₆" midpoint offset9 SPACES AT 24" spacing19 SPACES AT 12" spacing4" spacing6 SPACES AT 4" spacing+32 more

crop

p11_r01

page 11 · other_p11_r01
Original
p11_r01
{
  "view": "Elevation",
  "objects": [
    {
      "name": "prestressed concrete beam",
      "tag": "",
      "shape": "rectangular side elevation; partial shaped cross section at right",
      "material": "prestressed concrete",
      "count": 1,
      "note": "Beam is shown between ℄ BENT 2 and ℄ BENT 3."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Shown by ℄ BEARING locations at each end of the beam."
    },
    {
      "name": "low friction type hold down",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Located at the beam midpoint line."
    },
    {
      "name": "diaphragm bar hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "Callout identifies a 2 in. diameter hole; omission callouts apply at specified beams."
    },
    {
      "name": "draped prestressing strands",
      "tag": "8 - DRAPED STRANDS",
      "shape": "draped",
      "material": "steel",
      "count": 8,
      "note": ""
    },
    {
      "name": "reinforcement bars",
      "tag": "2-#5 U",
      "shape": "U-shaped",
      "material": "steel",
      "count": 2,
      "note": "At each location."
    },
    {
      "name": "reinforcement bars",
      "tag": "2-#4 U",
      "shape": "U-shaped",
      "material": "steel",
      "count": 2,
      "note": ""
    },
    {
      "name": "reinforcement bars",
      "tag": "2-#6 U",
      "shape": "U-shaped",
      "material": "steel",
      "count": 2,
      "note": "At each location."
    },
    {
      "name": "reinforcement bars",
      "tag": "13-#5 @ 6\"",
      "shape": "",
      "material": "steel",
      "count": 13,
      "note": ""
    },
    {
      "name": "reinforcement bars",
      "tag": "2-#4 Z",
      "shape": "Z-shaped",
      "material": "steel",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "span length",
      "value": "82'-0\"",
      "unit": "",
      "appliesTo": "span between ℄ BENT 2 and ℄ BENT 3"
    },
    {
      "label": "beam length",
      "value": "80'-11 5/8\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "midpoint dimension",
      "value": "40'-5 3/16\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "dimension",
      "value": "11 13/16\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "spacing",
      "value": "9 SPACES AT 24\"",
      "unit": "",
      "appliesTo": "beam reinforcement"
    },
    {
      "label": "spacing",
      "value": "19 SPACES AT 12\"",
      "unit": "",
      "appliesTo": "beam reinforcement"
    },
    {
      "label": "spacing",
      "value": "4\"",
      "unit": "",
      "appliesTo": "beam reinforcement"
    },
    {
      "label": "spacing",
      "value": "6 SPACES AT 4\"",
      "unit": "",
      "appliesTo": "beam reinforcement"
    },
    {
      "label": "dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "beam reinforcement"
    },
    {
      "label": "beam depth",
      "value": "2'-3\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "dimension",
      "value": "6 7/8\"",
      "unit": "",
      "appliesTo": "diaphragm bar hole location"
    },
    {
      "label": "dimension",
      "value": "6 7/8\"",
      "unit": "",
      "appliesTo": "diaphragm bar hole location"
    },
    {
      "label": "vertical dimension",
      "value": "8'-4 5/8\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "reinforcement spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "13-#5 @ 6\""
    },
    {
      "label": "dimension",
      "value": "2 5/8\"",
      "unit": "",
      "appliesTo": "beam"
    },
    {
      "label": "dimension",
      "value": "6 3/16\"",
      "unit": "",
      "appliesTo": "bearing end"
    },
    {
      "label": "dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "bearing end"
    },
    {
      "label": "dimension",
      "value": "1'-2 3/16\"",
      "unit": "",
      "appliesTo": "bearing end"
    },
    {
      "label": "bearing centerline to bearing centerline",
      "value": "79'-7 5/8\"",
      "unit": "",
      "appliesTo": "bearings"
    },
    {
      "label": "dimension",
      "value": "1'-4\"",
      "unit": "",
      "appliesTo": "partial beam section"
    },
    {
      "label": "dimension",
      "value": "7\"",
      "unit": "",
      "appliesTo": "partial beam section"
    },
    {
      "label": "dimension",
      "value": "2 1/2\"",
      "unit": "",
      "appliesTo": "partial beam section"
    },
    {
      "label": "dimension",
      "value": "7\"",
      "unit": "",
      "appliesTo": "partial beam section"
    },
    {
      "label": "centerline dimension",
      "value": "1 5/8\"",
      "unit": "",
      "appliesTo": "partial beam section"
    },
    {
      "label": "spacing",
      "value": "3 SPACES AT 2\"",
      "unit": "",
      "appliesTo": "partial beam section reinforcement"
    },
    {
      "label": "dimension",
      "value": "3\"",
      "unit": "",
      "appliesTo": "partial beam section"
    },
    {
      "label": "dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "partial beam section"
    },
    {
      "label": "dimension",
      "value": "1'-10\"",
      "unit": "",
      "appliesTo": "partial beam section"
    }
  ],
  "notes": [
    "MIDPOINT, DETAILS SYMMETRICAL ABOUT MIDPOINT UNLESS NOTED",
    "ΔNC = 1/4\"",
    "ΔC = 1/8\"",
    "℄ 2\" DIAMETER HOLE FOR DIAPHRAGM BAR",
    "OMIT HOLE AT BEAMS 6 AND 12",
    "OMIT HOLE AT BEAMS 1 AND 7",
    "ALL DIMENSIONS ARE ALONG ℄ BEAM"
  ],
  "labels": [
    "℄ BENT 2",
    "℄ BENT 3",
    "NOTES",
    "ELEVATION",
    "SECTION AT"
  ],
  "description": "This crop principally shows an elevation of one prestressed concrete beam spanning between ℄ BENT 2 and ℄ BENT 3, including bearing centerlines, beam dimensions, hold-down location, diaphragm-bar holes, and reinforcement/strand callouts. A partial beam cross section is visible at the right edge, with dimensions and reinforcement spacing partly cropped."
}

p11_r01Elevation

  • diaphragm bar hole×2circularCallout identifies a 2 in. diameter hole; omission callouts apply at specified beams.

82'-0" span length80'-11 5/8" beam length40'-5 3/16" midpoint dimension11 13/16" dimension9 SPACES AT 24" spacing19 SPACES AT 12" spacing4" spacing6 SPACES AT 4" spacing+20 more