Drawing → BOQ
← Mindmapwhat the drawings said

Fence Rail

1 page · 2 crops · ancillary

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a fence rail component class.

Every dimension read for it3

  • 5/8” DIA.pipe diameterp8 · p08_r01
  • 2’-6” Rrail bend radiusp8 · p08_r01
  • 45°rail bend anglep8 · p08_r01

Notes on the sheets that carry it

  • p8REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.
  • p8NOTE: BARS 401, 504 SERIES, 505, AND 506 SERIES NOT SHOWN
  • p8FENCE NOTES:
  • p81. FENCE SHALL BE 9 GAGE CHAIN LINK ZINC COATED TWO INCH SECURITY FENCE.
  • p82. CAST 4" DIA. GALVANIZED SLEEVE IN THE PARAPET. ALLOW NON-SHRINK, NON-METALLIC GROUT TO CURE FOR THREE DAYS BEFORE FENCE FABRIC IS INSTALLED.
  • p83. APPLY GALVANIZING REPAIR COMPOUND, IN ACCORDANCE WITH GEORGIA DOT SPECIFICATION 645, TO ENDS OF 4" DIA. GALVANIZED SLEEVES.
  • p84. PROVIDE EXPANSION SLEEVE FOR ALL RAILS TO MATCH SUPERSTRUCTURE JOINTS.
  • p85. FASTEN FABRIC TO POSTS AT INTERVALS NOT GREATER THAN 14".
  • p86. SPACE POSTS AT A MINIMUM OF 7'-0" AND A MAXIMUM OF 10'-0". PLACE POSTS 1'-0" MINIMUM FROM JOINTS IN BARRIER. SEE DECK PLAN FOR POST SPACING.
  • p87. FOR FURTHER DETAILS, SEE GEORGIA DOT SPECIFICATIONS SECTIONS 643 AND 894.
  • p8WATERPROOFING, SEE SECTION 530 OF THE GEORGIA DOT SPECIFICATIONS
  • p8SLAB REINFORCEMENT NOT SHOWN
  • p8BEARING NOT SHOWN
  • p81” GAP, MIN.
  • p82. CAST 4” DIA. GALVANIZED SLEEVE IN THE PARAPET. ALLOW NON-SHRINK, NON-METALLIC GROUT TO CURE 7 DAYS BEFORE FENCE FABRIC IS INSTALLED.

Every crop it was read in — the drawing beside what the model took off it

Page 8

crop

p08_r01 for further details see georgia dot spec

page 8 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p08_r01_for_further_details_see_georgia_dot_spec
Original
p08_r01 for further details see georgia dot spec
{
  "view": "Detail",
  "objects": [
    {
      "name": "endwall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Shown in section through endwall; 3'-0\" endwall at left and 1'-6\" endwall at intermediate location are called out."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "sloped",
      "material": "",
      "count": 1,
      "note": "Shown with 2% slope and required construction joint parallel with deck."
    },
    {
      "name": "prestressed concrete beams",
      "tag": "",
      "shape": "I-girder",
      "material": "",
      "count": null,
      "note": "Multiple beam sections are visible beneath deck; bars 401, 504 series, 505, and 506 series are noted as not shown."
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "strip",
      "material": "",
      "count": null,
      "note": "Called out at endwalls and at bearing/endwall locations."
    },
    {
      "name": "preformed foam joint filler",
      "tag": "",
      "shape": "strip",
      "material": "foam",
      "count": null,
      "note": "Called out around pad, typical."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "tapered",
      "material": "",
      "count": 1,
      "note": "Shown supporting fence and in endwall section."
    },
    {
      "name": "bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Bearing not shown."
    },
    {
      "name": "zinc coated chain link security fence",
      "tag": "",
      "shape": "mesh panel",
      "material": "zinc coated",
      "count": 1,
      "note": "Fence detail includes posts, rails, tension bars, and truss bracing."
    },
    {
      "name": "fence post",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": null,
      "note": "Includes 2 7/8\" pull post and post vertical."
    },
    {
      "name": "fence rail",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": null,
      "note": "1 5/8\" diameter pipe is called out."
    },
    {
      "name": "truss bracing",
      "tag": "",
      "shape": "diagonal pipe",
      "material": "zinc coated",
      "count": null,
      "note": "At end or pull post."
    },
    {
      "name": "pipe sleeve",
      "tag": "",
      "shape": "circular",
      "material": "galvanized",
      "count": null,
      "note": "4\" diameter standard-weight pipe sleeve is shown in barrier detail."
    },
    {
      "name": "reinforcement bar",
      "tag": "900A",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Callout: 4-900A."
    },
    {
      "name": "reinforcement bar",
      "tag": "900B",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Callout: 4-900B."
    },
    {
      "name": "reinforcement bar",
      "tag": "401",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Callout: 4-401."
    },
    {
      "name": "reinforcement bar",
      "tag": "504A",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Callout: 2-504A AT END OF BEAM."
    },
    {
      "name": "reinforcement bar",
      "tag": "504B",
      "shape": "",
      "material": "",
      "count": 8,
      "note": "Callout: 8-504B AT 12\" ± BETWEEN BEAMS."
    },
    {
      "name": "reinforcement bar",
      "tag": "505",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Callout: 1-505."
    },
    {
      "name": "reinforcement bar",
      "tag": "506A",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Callout text is partial at right crop edge."
    },
    {
      "name": "reinforcement bar",
      "tag": "506B",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Callout: 506B AT 18\" ±, ALT. TO GIVE 9\" SP."
    }
  ],
  "measurements": [
    {
      "label": "horizontal offset",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-8\"",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "34'-0\"",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "6'-8\"",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "horizontal offset",
      "value": "1'-1\"",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "vertical dimension",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "deck slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "gap, minimum",
      "value": "1\"",
      "unit": "",
      "appliesTo": "construction joint"
    },
    {
      "label": "endwall length",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "endwall length",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "joint filler thickness",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "foam joint filler thickness",
      "value": "1\"",
      "unit": "",
      "appliesTo": "preformed foam joint filler"
    },
    {
      "label": "fence gauge",
      "value": "9",
      "unit": "GAGE",
      "appliesTo": "chain link fence"
    },
    {
      "label": "fence mesh size",
      "value": "TWO INCH",
      "unit": "",
      "appliesTo": "chain link fence"
    },
    {
      "label": "sleeve diameter",
      "value": "4\"",
      "unit": "DIA.",
      "appliesTo": "galvanized sleeve"
    },
    {
      "label": "post fastening interval maximum",
      "value": "14\"",
      "unit": "",
      "appliesTo": "fence posts"
    },
    {
      "label": "post spacing minimum",
      "value": "7'-0\"",
      "unit": "",
      "appliesTo": "fence posts"
    },
    {
      "label": "post spacing maximum",
      "value": "10'-0\"",
      "unit": "",
      "appliesTo": "fence posts"
    },
    {
      "label": "post distance from barrier joint minimum",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "fence posts"
    },
    {
      "label": "tension bar spacing maximum",
      "value": "12\"",
      "unit": "O.C. MAX.",
      "appliesTo": "tension bars"
    },
    {
      "label": "pull post diameter",
      "value": "2 7/8\"",
      "unit": "",
      "appliesTo": "pull post"
    },
    {
      "label": "rail pipe diameter",
      "value": "1 5/8\"",
      "unit": "DIA.",
      "appliesTo": "zinc coated pipe"
    },
    {
      "label": "post pipe diameter",
      "value": "2 7/8\"",
      "unit": "DIA.",
      "appliesTo": "post vertical"
    },
    {
      "label": "fence offset",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "end post"
    },
    {
      "label": "fence offset",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "fence"
    },
    {
      "label": "fence height",
      "value": "5'-1\"",
      "unit": "",
      "appliesTo": "fence detail"
    },
    {
      "label": "fence height",
      "value": "4'-7\"",
      "unit": "",
      "appliesTo": "fence detail"
    },
    {
      "label": "fence height",
      "value": "10'-4\"",
      "unit": "",
      "appliesTo": "fence detail"
    },
    {
      "label": "top bend radius",
      "value": "2'-6\"",
      "unit": "R",
      "appliesTo": "fence detail"
    },
    {
      "label": "bend angle",
      "value": "45°",
      "unit": "",
      "appliesTo": "fence detail"
    },
    {
      "label": "horizontal dimension",
      "value": "10 1/4\"",
      "unit": "",
      "appliesTo": "fence detail"
    },
    {
      "label": "fence height",
      "value": "7'-0\"",
      "unit": "",
      "appliesTo": "zinc coated fence"
    },
    {
      "label": "pipe sleeve diameter",
      "value": "4\"",
      "unit": "DIA.",
      "appliesTo": "standard-weight pipe sleeve"
    },
    {
      "label": "embedment dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "barrier height",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "barrier"
    },
    {
      "label": "horizontal dimension",
      "value": "12\"",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "corner radius",
      "value": "1/4\"",
      "unit": "R",
      "appliesTo": "section at endwall"
    },
    {
      "label": "vertical dimension",
      "value": "10\"",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "vertical dimension",
      "value": "9\"",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "vertical dimension",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "vertical dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "vertical dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "clearance minimum",
      "value": "3 1/2\"",
      "unit": "MIN. CL.",
      "appliesTo": "section at endwall"
    },
    {
      "label": "clearance",
      "value": "2\"",
      "unit": "CL.",
      "appliesTo": "section at endwall"
    },
    {
      "label": "reinforcement spacing",
      "value": "18\" ±",
      "unit": "",
      "appliesTo": "506B"
    },
    {
      "label": "alternate reinforcement spacing",
      "value": "9\"",
      "unit": "SP.",
      "appliesTo": "506B"
    },
    {
      "label": "reinforcement spacing",
      "value": "12\" ±",
      "unit": "",
      "appliesTo": "504B"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "section at endwall"
    }
  ],
  "notes": [
    "REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.",
    "NOTE: BARS 401, 504 SERIES, 505, AND 506 SERIES NOT SHOWN",
    "FENCE NOTES:",
    "1. FENCE SHALL BE 9 GAGE CHAIN LINK ZINC COATED TWO INCH SECURITY FENCE.",
    "2. CAST 4\" DIA. GALVANIZED SLEEVE IN THE PARAPET. ALLOW NON-SHRINK, NON-METALLIC GROUT TO CURE FOR THREE DAYS BEFORE FENCE FABRIC IS INSTALLED.",
    "3. APPLY GALVANIZING REPAIR COMPOUND, IN ACCORDANCE WITH GEORGIA DOT SPECIFICATION 645, TO ENDS OF 4\" DIA. GALVANIZED SLEEVES.",
    "4. PROVIDE EXPANSION SLEEVE FOR ALL RAILS TO MATCH SUPERSTRUCTURE JOINTS.",
    "5. FASTEN FABRIC TO POSTS AT INTERVALS NOT GREATER THAN 14\".",
    "6. SPACE POSTS AT A MINIMUM OF 7'-0\" AND A MAXIMUM OF 10'-0\". PLACE POSTS 1'-0\" MINIMUM FROM JOINTS IN BARRIER. SEE DECK PLAN FOR POST SPACING.",
    "7. FOR FURTHER DETAILS, SEE GEORGIA DOT SPECIFICATIONS SECTIONS 643 AND 894.",
    "WATERPROOFING, SEE SECTION 530 OF THE GEORGIA DOT SPECIFICATIONS",
    "SLAB REINFORCEMENT NOT SHOWN",
    "BEARING NOT SHOWN"
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU ENDWALL",
    "(LOOKING AHEAD, LEFT BRIDGE SHOWN, RIGHT BRIDGE SIMILAR)",
    "ZINC COATED FENCE",
    "TENSION BAR",
    "TENSION BAR ZINC COATED",
    "TRUSS BRACING AT END OR PULL POST",
    "POST VERT. ZINC COATED",
    "END POST",
    "CONST. JOINT",
    "SLAB",
    "SECTION AT ENDWALL",
    "END BENT 1 SHOWN",
    "END BENT A1 SIMILAR",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "This crop contains a section through the bridge endwall, showing the deck, beam ends, endwalls, joints, and reinforcement callouts. It also includes fence notes, a zinc-coated chain link fence and barrier detail, and a separate endwall section with barrier, bearing, joint filler, waterproofing, and reinforcement callouts."
}

p08_r01 for further details see georgia dot specDetail

  • fence railcircular pipezinc coated1 5/8" diameter pipe is called out.

1/2" horizontal offset1'-8" horizontal dimension34'-0" horizontal dimension6'-8" horizontal dimension1'-1" horizontal offset3'-6" vertical dimension2% deck slope1" gap, minimum+42 more

crop

p08_r01

page 8 · other_p08_r01
Original
p08_r01
{
  "view": "Detail",
  "objects": [
    {
      "name": "endwall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Shown in section through endwall and section at endwall."
    },
    {
      "name": "bridge deck slab",
      "tag": "",
      "shape": "sloping rectangular slab",
      "material": "",
      "count": null,
      "note": "Top surface shown at 2% slope."
    },
    {
      "name": "barrier",
      "tag": "",
      "shape": "vertical tapered barrier",
      "material": "",
      "count": null,
      "note": "Barrier and slab are shown in fence and endwall details."
    },
    {
      "name": "preformed joint filler",
      "tag": "",
      "shape": "strip",
      "material": "preformed",
      "count": null,
      "note": "Shown at endwall and around pad."
    },
    {
      "name": "preformed foam joint filler",
      "tag": "",
      "shape": "strip",
      "material": "foam",
      "count": null,
      "note": "Shown around pad, typical."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "linear joint",
      "material": "",
      "count": null,
      "note": "Required construction joint parallel with deck, typical."
    },
    {
      "name": "prestressed concrete beams",
      "tag": "",
      "shape": "I-girder",
      "material": "",
      "count": null,
      "note": "Multiple beams are shown beneath the deck; individual count is not clear."
    },
    {
      "name": "bearing pad",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": "Partially shown in the section at endwall."
    },
    {
      "name": "chain link security fence",
      "tag": "",
      "shape": "mesh panel",
      "material": "9 gage zinc coated",
      "count": null,
      "note": "Fence detail shown on barrier."
    },
    {
      "name": "fence post",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": null,
      "note": "Post vertical, zinc coated."
    },
    {
      "name": "pull post",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": 1,
      "note": "Labeled 2 7/8” pull post."
    },
    {
      "name": "end post",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": 1,
      "note": "At construction joint."
    },
    {
      "name": "fence rail",
      "tag": "",
      "shape": "circular pipe",
      "material": "zinc coated",
      "count": null,
      "note": "Fence rails shown at top, intermediate, and bottom."
    },
    {
      "name": "truss bracing",
      "tag": "",
      "shape": "diagonal pipe",
      "material": "zinc coated",
      "count": null,
      "note": "At end or pull post."
    },
    {
      "name": "tension bar",
      "tag": "",
      "shape": "flat bar",
      "material": "zinc coated",
      "count": null,
      "note": "Shown at fence end/pull post."
    },
    {
      "name": "tension bar bands",
      "tag": "",
      "shape": "band",
      "material": "",
      "count": null,
      "note": "Spaced at 12” O.C. maximum."
    },
    {
      "name": "galvanized pipe sleeve",
      "tag": "",
      "shape": "circular sleeve",
      "material": "galvanized",
      "count": null,
      "note": "4” diameter standard-weight pipe sleeve cast in parapet/barrier."
    },
    {
      "name": "reinforcement bar",
      "tag": "4-900A",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Shown in section through endwall."
    },
    {
      "name": "reinforcement bar",
      "tag": "4-900B",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Shown in section through endwall."
    },
    {
      "name": "reinforcement bar",
      "tag": "506A",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Shown at 18” ± in section at endwall."
    },
    {
      "name": "reinforcement bar",
      "tag": "506B",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Shown at 18” ±, alternate, to give 9” spacing."
    },
    {
      "name": "reinforcement bar",
      "tag": "1-505",
      "shape": "bar",
      "material": "",
      "count": 1,
      "note": "Shown in section at endwall."
    },
    {
      "name": "reinforcement bar",
      "tag": "4-900",
      "shape": "bar",
      "material": "",
      "count": 4,
      "note": "Shown in section at endwall."
    },
    {
      "name": "reinforcement bar",
      "tag": "8-504B",
      "shape": "bar",
      "material": "",
      "count": 8,
      "note": "At 12” ± between beams."
    },
    {
      "name": "reinforcement bar",
      "tag": "2-504A",
      "shape": "bar",
      "material": "",
      "count": 2,
      "note": "Callout is partial: “AT END OF B…”."
    },
    {
      "name": "reinforcement bar",
      "tag": "4-401",
      "shape": "bar",
      "material": "",
      "count": 4,
      "note": "Shown in section at endwall."
    }
  ],
  "measurements": [
    {
      "label": "horizontal dimension",
      "value": "1 1/2”",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "1’-8”",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "34’-0”",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "6’-8”",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "1’-1”",
      "unit": "",
      "appliesTo": "section thru endwall"
    },
    {
      "label": "endwall height",
      "value": "3’-6”",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "deck slope",
      "value": "2%",
      "unit": "",
      "appliesTo": "bridge deck slab"
    },
    {
      "label": "gap minimum",
      "value": "1”",
      "unit": "",
      "appliesTo": "construction joint"
    },
    {
      "label": "joint filler thickness",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "endwall length",
      "value": "3’-0”",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "joint filler thickness",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "endwall length",
      "value": "1’-6”",
      "unit": "",
      "appliesTo": "endwall"
    },
    {
      "label": "foam joint filler thickness",
      "value": "1”",
      "unit": "",
      "appliesTo": "preformed foam joint filler"
    },
    {
      "label": "tension bar band spacing maximum",
      "value": "12”",
      "unit": "O.C. MAX.",
      "appliesTo": "tension bar bands"
    },
    {
      "label": "pipe diameter",
      "value": "5/8”",
      "unit": "DIA.",
      "appliesTo": "fence rail"
    },
    {
      "label": "pipe diameter",
      "value": "2 7/8”",
      "unit": "DIA.",
      "appliesTo": "fence post"
    },
    {
      "label": "pull post diameter",
      "value": "2 7/8”",
      "unit": "",
      "appliesTo": "pull post"
    },
    {
      "label": "post offset",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "offset",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "fence"
    },
    {
      "label": "post embedment",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "fence post"
    },
    {
      "label": "rail bend radius",
      "value": "2’-6”",
      "unit": "R",
      "appliesTo": "fence rail"
    },
    {
      "label": "rail bend angle",
      "value": "45°",
      "unit": "",
      "appliesTo": "fence rail"
    },
    {
      "label": "horizontal dimension",
      "value": "10 1/4”",
      "unit": "",
      "appliesTo": "fence detail"
    },
    {
      "label": "fence height",
      "value": "5’-1”",
      "unit": "",
      "appliesTo": "zinc coated fence"
    },
    {
      "label": "fence height",
      "value": "4’-7”",
      "unit": "",
      "appliesTo": "zinc coated fence"
    },
    {
      "label": "overall height",
      "value": "10’-4”",
      "unit": "",
      "appliesTo": "fence detail"
    },
    {
      "label": "pipe diameter",
      "value": "2 7/8”",
      "unit": "DIA.",
      "appliesTo": "fence post"
    },
    {
      "label": "fence length",
      "value": "7’-0”",
      "unit": "",
      "appliesTo": "zinc coated fence"
    },
    {
      "label": "pipe sleeve diameter",
      "value": "4”",
      "unit": "DIA.",
      "appliesTo": "galvanized pipe sleeve"
    },
    {
      "label": "sleeve embedment",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "galvanized pipe sleeve"
    },
    {
      "label": "barrier height",
      "value": "3’-6”",
      "unit": "",
      "appliesTo": "barrier"
    },
    {
      "label": "horizontal dimension",
      "value": "12”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "1’-6”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "horizontal dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "radius",
      "value": "1/4”",
      "unit": "R",
      "appliesTo": "section at endwall"
    },
    {
      "label": "reinforcement spacing",
      "value": "18” ±",
      "unit": "",
      "appliesTo": "506B"
    },
    {
      "label": "spacing",
      "value": "9”",
      "unit": "",
      "appliesTo": "506B"
    },
    {
      "label": "minimum clearance",
      "value": "3 1/2”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "reinforcement spacing",
      "value": "18”",
      "unit": "",
      "appliesTo": "506A"
    },
    {
      "label": "vertical dimension",
      "value": "10”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "vertical dimension",
      "value": "9”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "vertical dimension",
      "value": "12”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "clearance",
      "value": "2”",
      "unit": "CL. 3 SIDES",
      "appliesTo": "reinforcement bar"
    },
    {
      "label": "horizontal dimension",
      "value": "8”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "reinforcement spacing",
      "value": "12” ±",
      "unit": "",
      "appliesTo": "504B"
    },
    {
      "label": "vertical dimension",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "vertical dimension",
      "value": "1’-0”",
      "unit": "",
      "appliesTo": "section at endwall"
    },
    {
      "label": "joint filler thickness",
      "value": "1/2”",
      "unit": "",
      "appliesTo": "preformed joint filler"
    },
    {
      "label": "drawing scale",
      "value": "3/4” = 1’-0”",
      "unit": "",
      "appliesTo": "section at endwall"
    }
  ],
  "notes": [
    "REQUIRED CONSTRUCTION JOINT PARALLEL WITH DECK, TYP.",
    "1” GAP, MIN.",
    "NOTE: BARS 401, 504 SERIES, 505, AND 506 SERIES NOT SHOWN",
    "FENCE NOTES:",
    "1. FENCE SHALL BE 9 GAGE CHAIN LINK ZINC COATED TWO INCH SECURITY FENCE.",
    "2. CAST 4” DIA. GALVANIZED SLEEVE IN THE PARAPET. ALLOW NON-SHRINK, NON-METALLIC GROUT TO CURE 7 DAYS BEFORE FENCE FABRIC IS INSTALLED.",
    "3. APPLY GALVANIZING REPAIR COMPOUND, IN ACCORDANCE WITH GEORGIA DOT SPECIFICATION 645, TO ENDS OF 4” DIA. GALVANIZED SLEEVES.",
    "4. PROVIDE EXPANSION SLEEVE FOR ALL RAILS TO MATCH SUPERSTRUCTURE JOINTS.",
    "5. FASTEN FABRIC TO POSTS AT INTERVALS NOT GREATER THAN 14”.",
    "6. SPACE POSTS AT A MINIMUM OF 7’-0” AND A MAXIMUM OF 10’-0”. PLACE POSTS 1’-0” MINIMUM FROM JOINTS IN BARRIER. SEE DECK PLAN FOR POST SPACING.",
    "7. FOR FURTHER DETAILS, SEE GEORGIA DOT SPECIFICATIONS SECTIONS 643 AND 894.",
    "WATERPROOFING, SEE SECTION 530 OF THE GEORGIA DOT SPECIFICATIONS",
    "SLAB REINFORCEMENT NOT SHOWN"
  ],
  "labels": [
    "SR 21 WB = PGL",
    "SECTION THRU ENDWALL",
    "(LOOKING AHEAD, LEFT BRIDGE SHOWN, RIGHT BRIDGE SIMILAR)",
    "ZINC COATED FENCE",
    "TENSION BAR ZINC COATED",
    "TRUSS BRACING AT END OR PULL",
    "POST VERT. ZINC COATED",
    "END POST",
    "CONST. JOINT",
    "BARRIER",
    "SLAB",
    "SECTION AT ENDWALL",
    "END BENT 1 SHOWN",
    "END BENT 4 SIMILAR"
  ],
  "description": "This crop contains a section through an endwall, including the deck, endwall, beams, joint fillers, and selected reinforcement. It also shows zinc-coated chain-link fence details on a barrier, fence notes, and a partial section at endwall for End Bent 1 and similar End Bent 4."
}

p08_r01Detail

  • fence railcircular pipezinc coatedFence rails shown at top, intermediate, and bottom.

1 1/2” horizontal dimension1’-8” horizontal dimension34’-0” horizontal dimension6’-8” horizontal dimension1’-1” horizontal dimension3’-6” endwall height2% deck slope1” gap minimum+41 more