Drawing → BOQ
← Mindmapwhat the drawings said

Mechanical Coupler

2 pages · 4 crops · ×2 · material

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a mechanical reinforcing-bar coupler component class.

Every dimension read for it2

  • 1'-0"dimensionp14 · p14_r02 title block
  • 2'-0"dimensionp14 · p14_r02 title block

Notes on the sheets that carry it

  • p14NOTES:
  • p141. SEE BRIDGE SHEET NO. 16 FOR CAP, COLUMN AND FOOTING SECTIONS.
  • p142. BARS 422 NOT SHOWN.
  • p143. EXTEND BARS 1121A 3'-6" INTO CAP.
  • p14MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 511
  • p14* REQUIRED CONSTRUCTION JOINT. AT CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.
  • p14PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 237 KIPS.
  • p141. SEE BRIDGE SHEET NO.16 FOR CAP, COLUMN AND FOOTING REINFORCEMENT AND FOOTING NOTES.
  • p152. BARS 432 NOT SHOWN.
  • p153. EXTEND BARS 131A 3'-9" INTO CAP.
  • p15* REQUIRED CONSTRUCTION JOINT. AS CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.
  • p15MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION.
  • p15PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 222 KIPS.
  • p151. SEE BRIDGE SHEET NO. 16 FOR CAP, COLUMN AND FOOTING DETAILS.
  • p15MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 51.
  • p15* CONST. JT., TYP.
  • p15PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 220 KIPS.
  • p15ALL PILES SHALL BE STEEL H-PILES HP 12 X 53. partial

Every crop it was read in — the drawing beside what the model took off it

Page 14

crop

p14_r02 title block

page 14 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p14_r02_title_block
Original
p14_r02 title block
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Long cap shown across Columns 1 and 2; end portions continue/crop at both sides."
    },
    {
      "name": "column",
      "tag": "COLUMN 1",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Vertical column beneath cap."
    },
    {
      "name": "column",
      "tag": "COLUMN 2",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Vertical column beneath cap."
    },
    {
      "name": "footing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One footing is shown under each column; Column 2 footing is shown with 11'-6\" square typical dimension."
    },
    {
      "name": "H-pile",
      "tag": "",
      "shape": "H-section",
      "material": "",
      "count": null,
      "note": "Piles are shown beneath the footings; pile connection detail identifies H-PILE."
    },
    {
      "name": "reinforcement bar",
      "tag": "421",
      "shape": "",
      "material": "",
      "count": 44,
      "note": "44-421 AT EQ. SPS. in cap."
    },
    {
      "name": "reinforcement bar",
      "tag": "520",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "2-520 in cap."
    },
    {
      "name": "reinforcement bar",
      "tag": "1122",
      "shape": "",
      "material": "",
      "count": 8,
      "note": "8-1122 in cap."
    },
    {
      "name": "reinforcement bar",
      "tag": "1123",
      "shape": "",
      "material": "",
      "count": 8,
      "note": "8-1123 in cap."
    },
    {
      "name": "reinforcement bar",
      "tag": "620",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Multiple 620 bar callouts at stated maximum spacings."
    },
    {
      "name": "reinforcement bar",
      "tag": "621",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Multiple 621 bar callouts at stated maximum spacings."
    },
    {
      "name": "reinforcement bar",
      "tag": "521",
      "shape": "",
      "material": "",
      "count": null,
      "note": "12-521 and 25-521 bar callouts."
    },
    {
      "name": "reinforcement bar",
      "tag": "522",
      "shape": "",
      "material": "",
      "count": null,
      "note": "14-522 DBL callouts."
    },
    {
      "name": "reinforcement bar",
      "tag": "1121",
      "shape": "",
      "material": "",
      "count": null,
      "note": "12-1121 SERIES."
    },
    {
      "name": "reinforcement bar",
      "tag": "1120",
      "shape": "",
      "material": "",
      "count": null,
      "note": "12-1120 SERIES."
    },
    {
      "name": "reinforcement bar",
      "tag": "420",
      "shape": "",
      "material": "",
      "count": 12,
      "note": "12-420 AT EQ. SPS."
    },
    {
      "name": "reinforcement bar",
      "tag": "920",
      "shape": "",
      "material": "",
      "count": 16,
      "note": "16-920 AT EQ. SPS. in footing."
    },
    {
      "name": "reinforcement bar",
      "tag": "8 BAR",
      "shape": "U-shaped",
      "material": "",
      "count": null,
      "note": "Pile connection detail; #8 BAR, TYP."
    },
    {
      "name": "mechanical coupler",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Mechanical coupler, typical; see special provision 511."
    },
    {
      "name": "construction joint",
      "tag": "",
      "shape": "horizontal",
      "material": "",
      "count": null,
      "note": "Required construction joint at contractor's option."
    },
    {
      "name": "pile connection",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Detail shows reinforcing bars connected above an H-pile."
    }
  ],
  "measurements": [
    {
      "label": "cap reinforcement spacing",
      "value": "44-421",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap reinforcement spacing",
      "value": "AT EQ. SPS.",
      "unit": "",
      "appliesTo": "421"
    },
    {
      "label": "elevation",
      "value": "EL. 185.78",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "elevation",
      "value": "EL. 185.23",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "elevation",
      "value": "EL. 185.96",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "elevation",
      "value": "EL. 185.41",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "elevation",
      "value": "EL. 186.10",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "elevation",
      "value": "EL. 185.55",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "elevation",
      "value": "EL. 186.24",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "elevation",
      "value": "EL. 185.70",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "elevation",
      "value": "EL. 186.38",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "elevation",
      "value": "EL. 185.84",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "elevation",
      "value": "EL. 186.49",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "elevation",
      "value": "EL. 185.93",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "elevation",
      "value": "EL. 186.42",
      "unit": "",
      "appliesTo": "BK"
    },
    {
      "label": "elevation",
      "value": "EL. 185.84",
      "unit": "",
      "appliesTo": "AH"
    },
    {
      "label": "minimum cap depth",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "bar quantity",
      "value": "8-1122",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "bar quantity",
      "value": "2-520",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "bar quantity",
      "value": "8-1123",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.25",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.11",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.32",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.73",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.80",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.93",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.84",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.68",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "14-620 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "14-621 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "4'-8\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and spacing",
      "value": "11 SPS. AT 7\"",
      "unit": "",
      "appliesTo": "521"
    },
    {
      "label": "bar quantity",
      "value": "12-521",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "3½\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "spacing",
      "value": "6 SPS AT 5\"",
      "unit": "",
      "appliesTo": "522"
    },
    {
      "label": "bar quantity",
      "value": "14-522 DBL",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and spacing",
      "value": "25-521 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "9-620 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "9-621 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "9-620 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "9-621 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "7-620 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "7-621 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "14-620 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and maximum spacing",
      "value": "14-621 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "mechanical coupler"
    },
    {
      "label": "dimension",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "mechanical coupler"
    },
    {
      "label": "column dimension",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "bar quantity and spacing",
      "value": "12-420 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "dimension",
      "value": "4\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "clear cover",
      "value": "3\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "elevation",
      "value": "EL. 151.00",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "bar quantity and spacing",
      "value": "16-920 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "dimension",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    },
    {
      "label": "dimension",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    },
    {
      "label": "dimension",
      "value": "11'-6\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "pile"
    },
    {
      "label": "angle",
      "value": "15°",
      "unit": "",
      "appliesTo": "pile connection detail"
    },
    {
      "label": "bar size",
      "value": "#8",
      "unit": "",
      "appliesTo": "pile connection detail"
    },
    {
      "label": "minimum dimension",
      "value": "5\"",
      "unit": "",
      "appliesTo": "pile connection detail"
    },
    {
      "label": "hole diameter",
      "value": "2\"",
      "unit": "",
      "appliesTo": "pile connection detail"
    },
    {
      "label": "dimension",
      "value": "4\"",
      "unit": "",
      "appliesTo": "pile connection detail"
    },
    {
      "label": "angle",
      "value": "30°",
      "unit": "",
      "appliesTo": "#8 BAR"
    },
    {
      "label": "minimum dimension",
      "value": "24\"",
      "unit": "",
      "appliesTo": "#8 BAR"
    },
    {
      "label": "bar extension",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "1121"
    },
    {
      "label": "maximum factored axial load",
      "value": "237 KIPS",
      "unit": "",
      "appliesTo": "piles"
    }
  ],
  "notes": [
    "NOTES:",
    "1. SEE BRIDGE SHEET NO. 16 FOR CAP, COLUMN AND FOOTING SECTIONS.",
    "2. BARS 422 NOT SHOWN.",
    "3. EXTEND BARS 1121A 3'-6\" INTO CAP.",
    "MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 511",
    "* REQUIRED CONSTRUCTION JOINT. AT CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.",
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 237 KIPS."
  ],
  "labels": [
    "A",
    "B",
    "C",
    "I2-I121 SERIES",
    "I2-I120 SERIES",
    "PILE CONNECTION DETAIL",
    "NO SCALE",
    "ELEVATION",
    "(BENT 2 LEFT LOOKING AHEAD)"
  ],
  "description": "This crop shows an elevation of Bent 2, left looking ahead, with a long bent cap supported by Columns 1 and 2 and their footings/piles. It includes reinforcement callouts, cap and footing dimensions/elevations, a required construction-joint note, and a pile connection detail. Portions of the bent extend beyond the left and right crop boundaries."
}

p14_r02 title blockElevation

  • mechanical couplerMechanical coupler, typical; see special provision 511.

44-421 cap reinforcement spacingAT EQ. SPS. cap reinforcement spacingEL. 185.78 elevationEL. 185.23 elevationEL. 185.96 elevationEL. 185.41 elevationEL. 186.10 elevationEL. 185.55 elevation+63 more

crop

p14_r02

page 14 · other_p14_r02
Original
p14_r02
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bent cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Top member shown over Columns 1 and 2; right end continues into partial adjacent view."
    },
    {
      "name": "column",
      "tag": "℄ COLUMN 1",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Vertical column below cap."
    },
    {
      "name": "column",
      "tag": "℄ COLUMN 2",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Vertical column below cap."
    },
    {
      "name": "footing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Footing at Column 1 and typical footing detail at Column 2."
    },
    {
      "name": "H-pile",
      "tag": "H-PILE",
      "shape": "H-section",
      "material": "",
      "count": null,
      "note": "Shown beneath footings and in pile connection detail."
    },
    {
      "name": "reinforcement bar",
      "tag": "I4-620, I4-621, 9-620, 9-621, 7-620, 7-621, I2-420, I2-521, I2-522 DBL, I2-1121 SERIES, I2-1120 SERIES, I6-920, 8-I122, 8-I123, 2-520, #8 BAR",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Reinforcement callouts shown in cap, columns, footings, and pile connection detail."
    },
    {
      "name": "mechanical coupler",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Callout at Column 1; typ."
    },
    {
      "name": "construction joint",
      "tag": "CONST. JT.",
      "shape": "horizontal joint",
      "material": "",
      "count": 1,
      "note": "Required construction joint shown at footing/cap detail."
    },
    {
      "name": "pile connection reinforcement",
      "tag": "#8 BAR",
      "shape": "U-shaped",
      "material": "",
      "count": 2,
      "note": "Pile connection detail shows bent bars at H-pile."
    }
  ],
  "measurements": [
    {
      "label": "cap reinforcement spacing",
      "value": "44-421",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "minimum cap depth",
      "value": "4'-10\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "vertical dimension",
      "value": "9\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "vertical dimension",
      "value": "4'-8\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "cap/column horizontal dimension",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "cap/column horizontal dimension",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "cap/column horizontal dimension",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "Column 2"
    },
    {
      "label": "bar spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "I4-620"
    },
    {
      "label": "bar spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "I4-621"
    },
    {
      "label": "bar spacing",
      "value": "12\"",
      "unit": "",
      "appliesTo": "9-620"
    },
    {
      "label": "bar spacing",
      "value": "12\"",
      "unit": "",
      "appliesTo": "9-621"
    },
    {
      "label": "bar spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "9-620"
    },
    {
      "label": "bar spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "9-621"
    },
    {
      "label": "bar spacing",
      "value": "12\"",
      "unit": "",
      "appliesTo": "7-620"
    },
    {
      "label": "bar spacing",
      "value": "12\"",
      "unit": "",
      "appliesTo": "7-621"
    },
    {
      "label": "bar spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "I4-620"
    },
    {
      "label": "bar spacing",
      "value": "6\"",
      "unit": "",
      "appliesTo": "I4-621"
    },
    {
      "label": "bar spacing",
      "value": "7\"",
      "unit": "",
      "appliesTo": "I2-521"
    },
    {
      "label": "bar spacing",
      "value": "7\"",
      "unit": "",
      "appliesTo": "I2-521"
    },
    {
      "label": "bar spacing",
      "value": "5\"",
      "unit": "",
      "appliesTo": "I4-522 DBL"
    },
    {
      "label": "bar spacing",
      "value": "5\"",
      "unit": "",
      "appliesTo": "I4-522 DBL"
    },
    {
      "label": "horizontal dimension",
      "value": "3½\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "horizontal dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "horizontal dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "horizontal dimension",
      "value": "3½\"",
      "unit": "",
      "appliesTo": "Column 2"
    },
    {
      "label": "horizontal dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "Column 2"
    },
    {
      "label": "horizontal dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "Column 2"
    },
    {
      "label": "horizontal dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "vertical dimension",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "vertical dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "column height dimension",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "typical dimension",
      "value": "4\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "typical clear cover",
      "value": "3\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "vertical dimension",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "typical horizontal dimension",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "typical horizontal dimension",
      "value": "3'-6\"",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "typical footing size",
      "value": "11'-6\" SQUARE",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "typical pile projection/depth",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "pile connection bar angle",
      "value": "15°",
      "unit": "",
      "appliesTo": "#8 BAR"
    },
    {
      "label": "pile connection bar angle",
      "value": "15°",
      "unit": "",
      "appliesTo": "#8 BAR"
    },
    {
      "label": "pile connection bar angle",
      "value": "30°",
      "unit": "",
      "appliesTo": "#8 BAR"
    },
    {
      "label": "pile connection bar minimum length",
      "value": "24\" MIN.",
      "unit": "",
      "appliesTo": "#8 BAR"
    },
    {
      "label": "pile connection minimum dimension",
      "value": "5\" MIN.",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "pile connection hole diameter",
      "value": "2\" DIAMETER HOLES",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "pile connection horizontal dimension",
      "value": "4\"",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "pile connection horizontal dimension",
      "value": "4\"",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "elevation",
      "value": "EL. 185.78 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.23 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.96 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.41 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 186.10 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.55 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 186.24 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.70 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 186.38 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.84 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 186.49 (BK)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.93 (AH)",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.25",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "elevation",
      "value": "EL. 181.11",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "elevation",
      "value": "EL. 181.32",
      "unit": "",
      "appliesTo": "Column 1"
    },
    {
      "label": "elevation",
      "value": "EL. 181.73",
      "unit": "",
      "appliesTo": "Column 2"
    },
    {
      "label": "elevation",
      "value": "EL. 181.80",
      "unit": "",
      "appliesTo": "Column 2"
    },
    {
      "label": "elevation",
      "value": "EL. 181.93",
      "unit": "",
      "appliesTo": "bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 151.00, TYP.",
      "unit": "",
      "appliesTo": "footing"
    },
    {
      "label": "elevation",
      "value": "EL. 186.42 (BK)",
      "unit": "",
      "appliesTo": "partial adjacent bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 185.84 (AH)",
      "unit": "",
      "appliesTo": "partial adjacent bent cap"
    },
    {
      "label": "elevation",
      "value": "EL. 181.84",
      "unit": "",
      "appliesTo": "partial adjacent column"
    },
    {
      "label": "elevation",
      "value": "EL. 181.68",
      "unit": "",
      "appliesTo": "partial adjacent column"
    }
  ],
  "notes": [
    "1. SEE BRIDGE SHEET NO.16 FOR CAP, COLUMN AND FOOTING REINFORCEMENT AND FOOTING NOTES.",
    "2. BARS 422 NOT SHOWN.",
    "3. EXTEND BARS 1121A 3'-6\" INTO CAP.",
    "* REQUIRED CONSTRUCTION JOINT. AT CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.",
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 237 KIPS."
  ],
  "labels": [
    "NOTES:",
    "MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 511",
    "ELEVATION",
    "(BENT 2 LEFT LOOKING AHEAD)",
    "PILE CONNECTION DETAIL",
    "NO SCALE",
    "I2-1121 SERIES",
    "I2-1120 SERIES",
    "SECTION A",
    "SECTION B",
    "SECTION C"
  ],
  "description": "This crop shows the elevation for Bent 2, left looking ahead, including the bent cap, Columns 1 and 2, column reinforcement callouts, and footing/pile support details. A pile connection detail and a typical footing/required construction-joint detail are shown at the lower right; a partial adjacent elevation is visible at the far right."
}

p14_r02Elevation

  • mechanical coupler×1rectangularCallout at Column 1; typ.

44-421 cap reinforcement spacing4'-10" minimum cap depth9" vertical dimension4'-8" vertical dimension8'-9" cap/column horizontal dimension25'-0" cap/column horizontal dimension8'-9" cap/column horizontal dimension6" bar spacing+61 more

Page 15

crop

p15_r02 title block

page 15 · gdot_drawing_83a3db2262b94086918a1e232d2b9607_p15_r02_title_block
Original
p15_r02 title block
{
  "view": "Unclear",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "BENT 3 LEFT / BENT 3 RIGHT",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Shown in plan and elevation."
    },
    {
      "name": "Column",
      "tag": "COLUMN 1, COLUMN 2, COLUMN 3, COLUMN 4",
      "shape": "rectangular",
      "material": "",
      "count": 4,
      "note": "Centerlines are indicated."
    },
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 4,
      "note": "EL. 151.00, TYP. is called out at footings."
    },
    {
      "name": "H-pile",
      "tag": "",
      "shape": "H-section",
      "material": "",
      "count": null,
      "note": "Pile connection detail is shown; pile quantities are indicated by 18-930 AT EQ. SPS. on the left bent elevation."
    },
    {
      "name": "Pile connection reinforcement",
      "tag": "#8 BAR",
      "shape": "bent bar",
      "material": "",
      "count": 2,
      "note": "Shown in pile connection detail."
    },
    {
      "name": "Mechanical coupler",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "TYP.; SEE SPECIAL PROVISION."
    },
    {
      "name": "Construction joint",
      "tag": "",
      "shape": "horizontal joint",
      "material": "",
      "count": null,
      "note": "Required construction joint is indicated at the column/footing region."
    },
    {
      "name": "Reinforcement bars",
      "tag": "431, 530, 531, 532, 630, 631, 930, 131, 131A, 132, 133",
      "shape": "bar",
      "material": "",
      "count": null,
      "note": "Bar marks and spacing are shown for caps, columns, and footings."
    }
  ],
  "measurements": [
    {
      "label": "Cap reinforcing",
      "value": "44-431 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "BENT 3 LEFT / BENT 3 RIGHT"
    },
    {
      "label": "Cap reinforcing",
      "value": "8-1132",
      "unit": "",
      "appliesTo": "BENT 3 LEFT / BENT 3 RIGHT"
    },
    {
      "label": "Cap reinforcing",
      "value": "2-530",
      "unit": "",
      "appliesTo": "BENT 3 LEFT / BENT 3 RIGHT"
    },
    {
      "label": "Cap reinforcing",
      "value": "8-1133",
      "unit": "",
      "appliesTo": "BENT 3 LEFT / BENT 3 RIGHT"
    },
    {
      "label": "Cap depth",
      "value": "4'-0\" MIN.",
      "unit": "",
      "appliesTo": "BENT 3 LEFT / BENT 3 RIGHT"
    },
    {
      "label": "Cap length between indicated column regions",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT / BENT 3 RIGHT"
    },
    {
      "label": "End dimension",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT / BENT 3 RIGHT"
    },
    {
      "label": "Column reinforcing",
      "value": "12-531",
      "unit": "",
      "appliesTo": "COLUMN 1 / COLUMN 2"
    },
    {
      "label": "Column reinforcing",
      "value": "12-131 SERIES",
      "unit": "",
      "appliesTo": "COLUMN 3"
    },
    {
      "label": "Column reinforcing",
      "value": "12-1130 SERIES",
      "unit": "",
      "appliesTo": "COLUMN 2 / COLUMN 3"
    },
    {
      "label": "Column reinforcing spacing",
      "value": "6 SPS AT 5\"",
      "unit": "",
      "appliesTo": "Columns"
    },
    {
      "label": "Column reinforcing spacing",
      "value": "6 SPS AT 5\" DBL",
      "unit": "",
      "appliesTo": "Columns"
    },
    {
      "label": "Column reinforcing",
      "value": "14-532 DBL",
      "unit": "",
      "appliesTo": "Columns"
    },
    {
      "label": "Column reinforcing",
      "value": "14-532",
      "unit": "",
      "appliesTo": "Columns"
    },
    {
      "label": "Column width",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "COLUMN 2"
    },
    {
      "label": "Column vertical dimension",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "COLUMN 2"
    },
    {
      "label": "Column top and bottom offsets",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "COLUMN 2"
    },
    {
      "label": "Clear cover",
      "value": "3\" CL., TYP.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Footing depth",
      "value": "4'-0\" TYP.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Footing plan dimension",
      "value": "13'-0\" SQUARE TYP.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Footing reinforcing",
      "value": "18-930 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Footing pile reinforcing",
      "value": "18-930",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Footing elevation",
      "value": "EL. 151.00, TYP.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Pile reinforcing",
      "value": "14-630 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "Pile/footing connection"
    },
    {
      "label": "Pile reinforcing",
      "value": "14-631 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "Pile/footing connection"
    },
    {
      "label": "Pile reinforcing",
      "value": "9-630 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "Pile/footing connection"
    },
    {
      "label": "Pile reinforcing",
      "value": "9-631 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "Pile/footing connection"
    },
    {
      "label": "Pile reinforcing",
      "value": "7-630 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "Pile/footing connection"
    },
    {
      "label": "Pile reinforcing",
      "value": "7-631 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "Pile/footing connection"
    },
    {
      "label": "Pile reinforcing",
      "value": "14-430 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "Footing"
    },
    {
      "label": "Pile connection detail bar angle",
      "value": "15°",
      "unit": "",
      "appliesTo": "#8 BAR"
    },
    {
      "label": "Pile connection detail bar angle",
      "value": "30°",
      "unit": "",
      "appliesTo": "#8 BAR"
    },
    {
      "label": "Pile connection detail minimum dimension",
      "value": "5\" MIN.",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "Pile connection detail minimum dimension",
      "value": "24\" MIN.",
      "unit": "",
      "appliesTo": "#8 BAR"
    },
    {
      "label": "Pile connection detail dimension",
      "value": "4\"",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "Pile connection detail hole size",
      "value": "2\" DIAMETER HOLES",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.79 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.24 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.98 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.47 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.14 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.60 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.30 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.75 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.46 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.91 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.58 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.03 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.60 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.04 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.49 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.94 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.35 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.79 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.20 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.65 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 186.06 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.51 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.88 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap elevation",
      "value": "EL. 185.32 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.26",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.11",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.34",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.80",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.88",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 182.03",
      "unit": "",
      "appliesTo": "BENT 3 LEFT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 182.04",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.90",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.83",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.41",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.34",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Cap underside elevation",
      "value": "EL. 181.20",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT"
    },
    {
      "label": "Pile factored axial load",
      "value": "222 KIPS",
      "unit": "",
      "appliesTo": "Piles"
    }
  ],
  "notes": [
    "1. SEE BRIDGE SHEET NO. 16 FOR CAP, COLUMN AND FOOTING SECTIONS.",
    "2. BARS 432 NOT SHOWN.",
    "3. EXTEND BARS 131A 3'-9\" INTO CAP.",
    "* REQUIRED CONSTRUCTION JOINT. AS CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.",
    "MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION.",
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 222 KIPS."
  ],
  "labels": [
    "PLAN (BENT 3 LEFT)",
    "PLAN (BENT 3 RIGHT)",
    "ELEVATION (BENT 3 LEFT LOOKING AHEAD)",
    "ELEVATION (BENT 3 RIGHT LOOKING AHEAD)",
    "PILE CONNECTION DETAIL",
    "NO SCALE",
    "NOTES:",
    "A",
    "B",
    "SECTION A-A",
    "SECTION B-B",
    "INTERMEDIATE BENT 3",
    "BRIDGE NO. 1 LT. AND RT.",
    "GEORGIA DEPARTMENT OF TRANSPORTATION",
    "ENGINEERING DIVISION-OFFICE OF BRIDGES AND STRUCTURES",
    "SASTRY & ASSOCIATES, INC."
  ],
  "description": "This crop is an intermediate bent detail sheet showing plan views for Bent 3 Left and Bent 3 Right, together with their elevations. It documents bent caps, Columns 1 through 4, footings, H-pile connections, reinforcing bar marks, elevations, and a pile connection detail."
}

p15_r02 title blockUnclear

  • Mechanical coupler×1rectangularTYP.; SEE SPECIAL PROVISION.

44-431 AT EQ. SPS. Cap reinforcing8-1132 Cap reinforcing2-530 Cap reinforcing8-1133 Cap reinforcing4'-0" MIN. Cap depth25'-0" Cap length between indicated column regions8'-9" End dimension12-531 Column reinforcing+65 more

crop

p15_r02

page 15 · other_p15_r02
Original
p15_r02
{
  "view": "Detail",
  "objects": [
    {
      "name": "Bent cap",
      "tag": "BENT 3 LEFT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in plan and elevation at left."
    },
    {
      "name": "Bent cap",
      "tag": "BENT 3 RIGHT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in plan and elevation at right."
    },
    {
      "name": "Column",
      "tag": "COLUMN 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "COLUMN 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "COLUMN 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "COLUMN 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 4,
      "note": "EL. 151.00, TYP."
    },
    {
      "name": "H-pile",
      "tag": "",
      "shape": "H-section",
      "material": "steel",
      "count": 8,
      "note": "Pile connection detail shown; pile quantity is based on visible footing pile symbols."
    },
    {
      "name": "Pile connection reinforcement bar",
      "tag": "#8 BAR",
      "shape": "U-shaped",
      "material": "",
      "count": null,
      "note": "Shown in PILE CONNECTION DETAIL."
    },
    {
      "name": "Mechanical coupler",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 51."
    },
    {
      "name": "Construction joint",
      "tag": "",
      "shape": "horizontal joint",
      "material": "",
      "count": null,
      "note": "Construction-joint locations are indicated in the elevation."
    }
  ],
  "measurements": [
    {
      "label": "Cap reinforcing-bar spacing",
      "value": "44-43I AT EQ. SPS.",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.79 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.24 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.98 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.43 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.14 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.60 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.30 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.75 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.46 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.91 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.58 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.03 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Cap depth",
      "value": "4'-0\" MIN.",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Bar callout",
      "value": "8-I132",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Bar callout",
      "value": "2-530",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.26",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap underside"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.11",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap underside"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.34",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap underside"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.80",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap underside"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.88",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap underside"
    },
    {
      "label": "Elevation",
      "value": "EL. 182.03",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap underside"
    },
    {
      "label": "Spacing",
      "value": "3½\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Bar spacing",
      "value": "11 SPS. AT 7\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Bar callout",
      "value": "12-53I",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Bar spacing",
      "value": "6 SPS AT 1'-5\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Bar callout",
      "value": "14-532 DBL",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Bar callout",
      "value": "25-53I AT EQ. SPS.",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Dimension",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Dimension",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "BENT 3 LEFT cap"
    },
    {
      "label": "Bar callout",
      "value": "12-I131 SERIES",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Dimension",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Dimension",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Bar callout",
      "value": "12-I130 SERIES",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Dimension",
      "value": "9'-6\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Dimension",
      "value": "4\" TYP.",
      "unit": "",
      "appliesTo": "Column reinforcement"
    },
    {
      "label": "Dimension",
      "value": "4'-8\"",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Bar callout and spacing",
      "value": "14-630 AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Bar callout and spacing",
      "value": "14-63I AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Bar callout and spacing",
      "value": "9-630 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Bar callout and spacing",
      "value": "9-63I AT 6\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Bar callout and spacing",
      "value": "7-630 AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Bar callout and spacing",
      "value": "7-63I AT 12\" MAX.",
      "unit": "",
      "appliesTo": "COLUMN 1"
    },
    {
      "label": "Bar callout",
      "value": "14-430 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "COLUMN 1 footing"
    },
    {
      "label": "Bar callout and spacing",
      "value": "18-930 AT EQ. SPS.",
      "unit": "",
      "appliesTo": "COLUMN 1 footing"
    },
    {
      "label": "Elevation",
      "value": "EL. 151.00, TYP.",
      "unit": "",
      "appliesTo": "Footings"
    },
    {
      "label": "Dimension",
      "value": "4'-9\" TYP.",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    },
    {
      "label": "Dimension",
      "value": "3'-6\" TYP.",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    },
    {
      "label": "Dimension",
      "value": "1'-0\" TYP.",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    },
    {
      "label": "Dimension",
      "value": "13'-0\" SQUARE TYP.",
      "unit": "",
      "appliesTo": "COLUMN 2 footing"
    },
    {
      "label": "Cap reinforcing-bar spacing",
      "value": "44-43I AT EQ. SPS.",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.60 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.04 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.49 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.94 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.35 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.79 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.20 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.65 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 186.06 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.51 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.88 (AH)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 185.32 (BK)",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Cap depth",
      "value": "4'-0\" MIN.",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Bar callout",
      "value": "8-I132",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Bar callout",
      "value": "2-530",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.90",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap underside"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.83",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap underside"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.41",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap underside"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.34",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap underside"
    },
    {
      "label": "Elevation",
      "value": "EL. 181.20",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap underside"
    },
    {
      "label": "Spacing",
      "value": "3½\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Bar spacing",
      "value": "11 SPS. AT 7\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Bar callout",
      "value": "12-53I",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Bar spacing",
      "value": "6 SPS AT 1'-5\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Bar callout",
      "value": "14-532 DBL",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Bar callout",
      "value": "25-53I AT EQ. SPS.",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Dimension",
      "value": "2\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Dimension",
      "value": "8\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Dimension",
      "value": "8'-9\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Dimension",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "BENT 3 RIGHT cap"
    },
    {
      "label": "Bar callout",
      "value": "12-I131 SERIES",
      "unit": "",
      "appliesTo": "COLUMN 3"
    },
    {
      "label": "Bar callout",
      "value": "12-I130 SERIES",
      "unit": "",
      "appliesTo": "COLUMN 3"
    },
    {
      "label": "Dimension",
      "value": "15°",
      "unit": "",
      "appliesTo": "Pile connection detail"
    },
    {
      "label": "Dimension",
      "value": "30°",
      "unit": "",
      "appliesTo": "Pile connection detail"
    },
    {
      "label": "Dimension",
      "value": "24\" MIN.",
      "unit": "",
      "appliesTo": "Pile connection detail"
    },
    {
      "label": "Dimension",
      "value": "5\" MIN.",
      "unit": "",
      "appliesTo": "Pile connection detail"
    },
    {
      "label": "Diameter",
      "value": "⅞\" DIAMETER HOLES",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "Dimension",
      "value": "4\"",
      "unit": "",
      "appliesTo": "H-PILE"
    },
    {
      "label": "Pile axial load",
      "value": "220 KIPS",
      "unit": "",
      "appliesTo": "Piles"
    }
  ],
  "notes": [
    "1. SEE BRIDGE SHEET NO. 16 FOR CAP, COLUMN AND FOOTING DETAILS.",
    "2. BARS 432 NOT SHOWN.",
    "3. EXTEND BARS 131A 3'-9\" INTO CAP.",
    "MECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 51.",
    "* REQUIRED CONSTRUCTION JOINT. AT CONTRACTOR'S OPTION, CONSTRUCTION JOINT MAY BE RELOCATED TO TOP OF FOOTING.",
    "* CONST. JT., TYP.",
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 220 KIPS.",
    "ALL PILES SHALL BE STEEL H-PILES HP 12 X 53. partial"
  ],
  "labels": [
    "PLAN",
    "(BENT 3 LEFT)",
    "PLAN",
    "(BENT 3 RIGHT)",
    "ELEVATION",
    "(BENT 3 LEFT LOOKING AHEAD)",
    "ELEVATION",
    "(BENT 3 RIGHT LOOKING AHEAD)",
    "PILE CONNECTION DETAIL",
    "NO SCALE",
    "NOTES:",
    "BRIDGE NO. I LT. AND RT.",
    "S&A SASTRY & ASSOCIATES, INC.",
    "GEORGIA DEPARTMENT OF TRANSPORTATION",
    "ENGINEERING DIVISION-OFFICE OF BRIDGES AND STRUCTURES",
    "INTERMEDIATE BENT 3"
  ],
  "description": "This crop shows plan and elevation details for Intermediate Bent 3, divided into BENT 3 LEFT and BENT 3 RIGHT, with columns 1 through 4 and their individual footings. It also includes cap and column reinforcing callouts, footing pile symbols, construction-joint information, and a pile connection detail for H-piles."
}

p15_r02Detail

  • Mechanical couplerMECHANICAL COUPLER, TYP. SEE SPECIAL PROVISION 51.

44-43I AT EQ. SPS. Cap reinforcing-bar spacingEL. 185.79 (AH) ElevationEL. 185.24 (BK) ElevationEL. 185.98 (AH) ElevationEL. 185.43 (BK) ElevationEL. 186.14 (AH) ElevationEL. 185.60 (BK) ElevationEL. 186.30 (AH) Elevation+84 more