Drawing → BOQ
← Mindmapwhat the drawings said

Joint Opening

1 page · 1 crop · ×1 · superstructure

⚠ No class in the bridge ontology fits this itemAdd a class

The ontology would need a generic deck joint opening class.

Every dimension read for it3

  • 1 3/8"joint opening widthp2 · p02_r03
  • 1/2"vertical dimensionp2 · p02_r03
  • 1/4" Rradiusp2 · p02_r03

Notes on the sheets that carry it

  • p2* PREFORMED SILICONE JOINT SEAL AS PER SPECIAL PROVISION SECTION 449
  • p2FILLER MATERIAL IN ACCORDANCE WITH SUB-SECTION 833.2.01 OF THE GEORGIA DOT SPECIFICATIONS, HOLD IN PLACE WITH 10d GALV. NAILS

Every crop it was read in — the drawing beside what the model took off it

Page 2

crop

p02_r03

page 2 · other_p02_r03
Original
p02_r03
{
  "view": "Detail",
  "objects": [
    {
      "name": "preformed silicone joint seal",
      "tag": "*",
      "shape": "profiled",
      "material": "silicone",
      "count": 1,
      "note": "Installed within the expansion joint opening."
    },
    {
      "name": "silicone adhesive",
      "tag": "",
      "shape": "irregular fillets",
      "material": "silicone",
      "count": 2,
      "note": "Shown at both sides of the joint seal."
    },
    {
      "name": "filler material",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Hatched filler below the joint seal."
    },
    {
      "name": "joint opening",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Shown between two adjacent structural faces."
    }
  ],
  "measurements": [
    {
      "label": "joint opening width",
      "value": "1 3/8\"",
      "unit": "",
      "appliesTo": "joint opening"
    },
    {
      "label": "vertical dimension",
      "value": "1/2\"",
      "unit": "",
      "appliesTo": "joint opening"
    },
    {
      "label": "radius",
      "value": "1/4\" R",
      "unit": "",
      "appliesTo": "joint opening"
    }
  ],
  "notes": [
    "* PREFORMED SILICONE JOINT SEAL AS PER SPECIAL PROVISION SECTION 449",
    "FILLER MATERIAL IN ACCORDANCE WITH SUB-SECTION 833.2.01 OF THE GEORGIA DOT SPECIFICATIONS, HOLD IN PLACE WITH 10d GALV. NAILS"
  ],
  "labels": [
    "EXPANSION JOINT DETAILS",
    "END BENTS 1 AND 4"
  ],
  "description": "This crop shows an expansion joint detail for End Bents 1 and 4. It depicts a preformed silicone joint seal installed in a 1 3/8 inch opening, with silicone adhesive at each side and filler material below."
}

p02_r03Detail

  • joint opening×1rectangularShown between two adjacent structural faces.

1 3/8" joint opening width1/2" vertical dimension1/4" R radius