Drawing → BOQ
← Mindmapwhat the drawings said

Endfill

1 page · 1 crop · ×1 · earthwork

Matched toApproach Embankmentbridge.approach_earthwork_system.embankmentcheckon “Endfill”

1 read off the drawings · 1 derived · 2 not established
The class asks forValueHowFrom
LengthLwants m/mm21'-0" ft-in15'-0" + 4'-0" + 2'-0" = 21'-0".The detail shows the endfill control profile and three consecutive horizontal control dimensions. No single dimension is explicitly labelled as the endfill length; therefore the combined horizontal extent is attributed to the endfill detail.derivedcheckp1 · p01_r03 endfill control diagram
Cross-sectional AreaAwants m2/mm2not establishedThe detail provides horizontal controls, one 4'-9" vertical control, and a slope, but does not establish the complete bounded endfill cross-section needed to calculate an area.not found
Material TypeMATnot establishedThe endfill object note explicitly states that material is not stated.not found
SlopeSLOPEwants ratio/percent1 vertical : 2 horizontal ratioThe slope measurement explicitly applies to the endfill slope.readp1 · p01_r03 endfill control diagram

Worked out by openai/gpt-5.6-terra from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

Notes on the sheets that carry it

  • p1TOP OF HIGH RAIL, TYP.
  • p1ENDFILL CONTROL POINT, TYP.
  • p1* NORMAL TO RR ℄

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r03 endfill control diagram

page 1 · gdot_drawing_for_one_item_1d2aef44145e4a0fb4e1079a43f94de1_p01_r03_endfill_control_diagram
Original
p01_r03 endfill control diagram
{
  "view": "Detail",
  "objects": [
    {
      "name": "future track centerline",
      "tag": "",
      "shape": "vertical dashed line",
      "material": "",
      "count": 1,
      "note": "Identified by a centerline symbol and the label FUTURE TRACK."
    },
    {
      "name": "endfill",
      "tag": "",
      "shape": "sloping and stepped fill profile",
      "material": "",
      "count": 1,
      "note": "Profile is shown below the top line; material is not stated."
    },
    {
      "name": "endfill control point",
      "tag": "",
      "shape": "point on sloping line",
      "material": "",
      "count": 1,
      "note": "Called out as typical."
    },
    {
      "name": "high rail",
      "tag": "",
      "shape": "horizontal line",
      "material": "",
      "count": null,
      "note": "Shown as the top-of-high-rail reference line."
    }
  ],
  "measurements": [
    {
      "label": "horizontal dimension",
      "value": "15'-0\"",
      "unit": "",
      "appliesTo": "future track centerline to first vertical control line"
    },
    {
      "label": "horizontal dimension",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "between vertical control lines"
    },
    {
      "label": "horizontal dimension",
      "value": "2'-0\"",
      "unit": "",
      "appliesTo": "between vertical control lines"
    },
    {
      "label": "vertical dimension",
      "value": "4'-9\"",
      "unit": "",
      "appliesTo": "top of high rail to lower profile, TYP."
    },
    {
      "label": "slope",
      "value": "1 vertical : 2 horizontal",
      "unit": "",
      "appliesTo": "endfill slope"
    }
  ],
  "notes": [
    "TOP OF HIGH RAIL, TYP.",
    "ENDFILL CONTROL POINT, TYP.",
    "* NORMAL TO RR ℄"
  ],
  "labels": [
    "℄ FUTURE TRACK",
    "ENDFILL CONTROL DIAGRAM",
    "NO SCALE"
  ],
  "description": "This crop is an endfill control diagram, shown as a schematic detail with a future track centerline and a stepped/sloped endfill profile. It establishes horizontal and vertical control dimensions, a 1-to-2 slope graphic, and the typical endfill control point normal to the railroad centerline."
}

p01_r03 endfill control diagramDetail

  • endfill×1sloping and stepped fill profileProfile is shown below the top line; material is not stated.

15'-0" horizontal dimension4'-0" horizontal dimension2'-0" horizontal dimension4'-9" vertical dimension1 vertical : 2 horizontal slope