Drawing → BOQ
← Mindmapwhat the drawings said

Pile Cap

1 page · 2 crops · ×4 · foundation

Matched toPile Capbridge.foundation_system.deep_foundation.pile_capon “Pile Cap”

1 read off the drawings · 5 not established
The class asks forValueHowFrom
LengthLwants m/mmnot establishedBoth elevation crops show pile caps below Bents 2 and 3, but neither states or establishes a pile-cap length.not found
WidthWwants m/mmnot establishedNeither crop provides a pile-cap width dimension or sufficient dimensional components to derive one.not found
ThicknessTwants m/mmnot establishedNeither crop states a thickness/depth dimension for the pile caps.not found
Instance CountNwants count2 countEach crop identifies pile cap objects with count 2, described as one below each visible bent.readp1 · p01_r07 planp1 · p01_r07
Concrete Gradefcknot establishedNo concrete grade is stated for the pile caps in either crop.not found
Top LevelTOLwants mnot establishedEL. 151.00, TYP. is shown in the bridge elevation but is not identified as the top level of a pile cap; therefore it cannot be assigned to this item.not found

Worked out by openai/gpt-5.6-terra from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

Notes on the sheets that carry it

  • p1CHAIN LINK WIRE FENCE, TYP.
  • p1FRONT FACE OF WALL NO. 1
  • p1FRONT FACE OF WALL NO. 2
  • p1FUTURE GROUNDLINE
  • p1APPROXIMATE EXISTING GROUNDLINE

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r07 plan

page 1 · gdot_drawing_for_one_item_1d2aef44145e4a0fb4e1079a43f94de1_p01_r07_plan
Original
p01_r07 plan
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bridge superstructure/deck",
      "tag": "",
      "shape": "longitudinal slab/beam profile",
      "material": "",
      "count": 1,
      "note": "Shown spanning between Wall No. 1, Bent 2, Bent 3, and Wall No. 2."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 1",
      "shape": "vertical rectangular",
      "material": "",
      "count": 1,
      "note": "Callout identifies front face of wall."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 2",
      "shape": "vertical rectangular",
      "material": "",
      "count": 1,
      "note": "Callout identifies front face of wall."
    },
    {
      "name": "bent",
      "tag": "BENT 2 **",
      "shape": "two-column bent with rectangular cap",
      "material": "",
      "count": 1,
      "note": "Supported on a pile cap."
    },
    {
      "name": "bent",
      "tag": "BENT 3 **",
      "shape": "two-column bent with rectangular cap",
      "material": "",
      "count": 1,
      "note": "Supported on a pile cap."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One below each visible bent."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "vertical",
      "material": "",
      "count": 6,
      "note": "Three visible below each pile cap."
    },
    {
      "name": "bearing",
      "tag": "FIX",
      "shape": "bearing symbol",
      "material": "",
      "count": 2,
      "note": "Two fixed bearings are labeled."
    },
    {
      "name": "bearing",
      "tag": "EXP.",
      "shape": "bearing symbol",
      "material": "",
      "count": 4,
      "note": "Four expansion bearings are labeled."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "fence panels",
      "material": "chain link wire",
      "count": 3,
      "note": "Marked typical."
    }
  ],
  "measurements": [
    {
      "label": "TOTAL LENGTH OF BRIDGE",
      "value": "192’-0” ***",
      "unit": "",
      "appliesTo": "bridge"
    },
    {
      "label": "span length",
      "value": "55’-0” ***",
      "unit": "",
      "appliesTo": "left span"
    },
    {
      "label": "span length",
      "value": "82’-0” ***",
      "unit": "",
      "appliesTo": "center span"
    },
    {
      "label": "span length",
      "value": "55’-0” ***",
      "unit": "",
      "appliesTo": "right span"
    },
    {
      "label": "elevation",
      "value": "151.00",
      "unit": "",
      "appliesTo": "EL., TYP."
    }
  ],
  "notes": [
    "CHAIN LINK WIRE FENCE, TYP.",
    "FRONT FACE OF WALL NO. 1",
    "FRONT FACE OF WALL NO. 2",
    "FUTURE GROUNDLINE",
    "APPROXIMATE EXISTING GROUNDLINE"
  ],
  "labels": [
    "PLAN",
    "B.F.P.R. BENT 1 **",
    "BENT 2 **",
    "BENT 3 **",
    "B.F.P.R. BENT 4 **",
    "PGL",
    "EL. 151.00, TYP.",
    "℄ FUTURE ACCESS ROAD",
    "℄ EXISTING TRACK",
    "℄ FUTURE TRACK",
    "1",
    "2",
    "3",
    "4"
  ],
  "description": "This crop shows a longitudinal bridge elevation, despite the cropped title text reading “PLAN.” The bridge superstructure is shown over three spans between two walls and two intermediate bents, with fixed and expansion bearings, chain link fence, future groundline, and approximate existing groundline indicated."
}

p01_r07 planElevation

  • pile cap×2rectangularOne below each visible bent.

192’-0” *** TOTAL LENGTH OF BRIDGE55’-0” *** span length82’-0” *** span length55’-0” *** span length151.00 elevation

crop

p01_r07

page 1 · other_p01_r07
Original
p01_r07
{
  "view": "Elevation",
  "objects": [
    {
      "name": "bridge superstructure",
      "tag": "",
      "shape": "longitudinal deck/girder profile",
      "material": "",
      "count": 1,
      "note": "Shown spanning between Wall No. 1, Bent 2, Bent 3, and Wall No. 2."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 1",
      "shape": "vertical rectangular",
      "material": "",
      "count": 1,
      "note": "Front face is called out."
    },
    {
      "name": "wall",
      "tag": "WALL NO. 2",
      "shape": "vertical rectangular",
      "material": "",
      "count": 1,
      "note": "Front face is called out."
    },
    {
      "name": "bent",
      "tag": "BENT 2",
      "shape": "two-column bent with rectangular cap",
      "material": "",
      "count": 1,
      "note": "Shown with a pile cap and three visible piles."
    },
    {
      "name": "bent",
      "tag": "BENT 3",
      "shape": "two-column bent with rectangular cap",
      "material": "",
      "count": 1,
      "note": "Shown with a pile cap and three visible piles."
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One below each visible bent."
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "vertical",
      "material": "",
      "count": 6,
      "note": "Three visible below each pile cap."
    },
    {
      "name": "chain link wire fence",
      "tag": "",
      "shape": "rectangular fence panels",
      "material": "wire",
      "count": 3,
      "note": "Called out as typical."
    },
    {
      "name": "bearing",
      "tag": "FIX",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Fixed bearing callouts at Bent 2."
    },
    {
      "name": "bearing",
      "tag": "EXP.",
      "shape": "",
      "material": "",
      "count": 4,
      "note": "Expansion bearing callouts at the walls and Bent 3."
    }
  ],
  "measurements": [
    {
      "label": "TOTAL LENGTH OF BRIDGE",
      "value": "192'-0\" ***",
      "unit": "",
      "appliesTo": "bridge superstructure"
    },
    {
      "label": "span length",
      "value": "55'-0\" ***",
      "unit": "",
      "appliesTo": "between B.F.P.R. BENT 1 and BENT 2"
    },
    {
      "label": "span length",
      "value": "82'-0\" ***",
      "unit": "",
      "appliesTo": "between BENT 2 and BENT 3"
    },
    {
      "label": "span length",
      "value": "55'-0\" ***",
      "unit": "",
      "appliesTo": "between BENT 3 and B.F.P.R. BENT 4"
    },
    {
      "label": "elevation",
      "value": "151.00",
      "unit": "",
      "appliesTo": "EL. 151.00, TYP."
    }
  ],
  "notes": [
    "CHAIN LINK WIRE FENCE, TYP.",
    "FRONT FACE OF WALL NO.1",
    "FRONT FACE OF WALL NO.2",
    "FUTURE GROUNDLINE",
    "APPROXIMATE EXISTING GROUNDLINE"
  ],
  "labels": [
    "PLAN",
    "B.F.P.R. BENT 1",
    "BENT 2",
    "BENT 3",
    "B.F.P.R. BENT 4",
    "PGL",
    "FIX",
    "EXP.",
    "EL. 151.00, TYP.",
    "℄ FUTURE ACCESS ROAD",
    "℄ EXISTING TRACK",
    "℄ FUTURE TRACK",
    "1",
    "2",
    "3",
    "4"
  ],
  "description": "This crop shows a longitudinal bridge elevation, despite the printed word \"PLAN\" at the top. The bridge is shown as a 192'-0\" three-span structure supported by Wall No. 1, Bent 2, Bent 3, and Wall No. 2, with chain link wire fence along the deck. Future and approximate existing groundlines, a future access road centerline, and existing/future track centerlines are indicated below the structure."
}

p01_r07Elevation

  • pile cap×2rectangularOne below each visible bent.

192'-0" *** TOTAL LENGTH OF BRIDGE55'-0" *** span length82'-0" *** span length55'-0" *** span length151.00 elevation