Drawing → BOQ
← Mindmapwhat the drawings said

Carriageway

1 page · 2 crops · ×3 · pavement

Matched toCarriagewaybridge.alignment_system.carriagewayon “Carriageway”

1 read off the drawings · 1 not established
The class asks forValueHowFrom
WidthWwants m/mm13500 mmRead directly from plan label 'CARRIAGEWAY' measurement entry: 'Carriageway width' = 13500, applied to 'CARRIAGEWAY (right and left)', matching the Carriageway object note '13500 wide carriageway on each side (right side and left side of bridge)'.The reading explicitly labels the Carriageway object (count 2, one per side) with a width of 13500mm, distinct from the 'WIDTH CARRIAGEWAY' value of 16550mm which appears to be a wider composite dimension (possibly including footpath/barrier offsets) rather than the carriageway itself. The 13500 value is directly tied to the object named 'Carriageway' in the same crop, so it is taken as the carriageway width.readp1 · p01_r05
Total LengthL_totalwants m/mmnot establishedThe available dimensions (40000/46189, 37761/43603) pertain to the bridge structure's overall length (square and skew), not explicitly to the carriageway as a road element, which typically continues past the bridge limits. No approach road length or total carriageway length is stated, so it cannot be derived without inventing a boundary.not found

Worked out by anthropic/claude-sonnet-5 from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

How the sheets named it

Road/carriagewayTO KHANDWA

Notes on the sheets that carry it

  • p1RCC CRASH BARRIER
  • p1APPROACH SLAB
  • p1C/L OF EXP. JOINT
  • p1C/L OF MEDIAN
  • p1C/L BRIDGE (RIGHT SIDE)
  • p1C/L BRIDGE (LEFT SIDE)
  • p1INDEPENDENT RETAINING WALL
  • p1MEDIAN WALL PCC M15
  • p1TO KHANDWA
  • p1℄ OF EXP. JOINT
  • p130° SKEW
  • p1STRUCTURE TYPE: MJBR
  • p1SKEW: 30°
  • p1PROPOSAL: New Construction
  • p1PROPOSED SPAN: 2X40m
  • p1CH.: 64+412

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r05

page 1 · bridge_deck_and_approach_slab_p01_r05
Original
p01_r05
{
  "view": "Plan",
  "objects": [
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular (skewed/angled)",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One shown on each carriageway (left and right), abutting the abutment/expansion joint line, skewed relative to carriageway"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear, rectangular in section",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Runs along both edges of carriageway; small square/rectangular markers along its length possibly denoting posts or joints"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "1500mm wide strip on either outer edge of carriageway"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "Centerline of median (C/L OF MEDIAN) separating the two carriageways, 2900 wide"
    },
    {
      "name": "Expansion joint",
      "tag": "A1",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "C/L of expansion joint marked at top, aligned with grid/section marker A1"
    },
    {
      "name": "Carriageway",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "13500 wide carriageway on each side (right side and left side of bridge)"
    },
    {
      "name": "Drainage/scupper symbols (small hatched squares)",
      "tag": "",
      "shape": "small square",
      "material": "",
      "count": 16,
      "note": "Repeated small square symbols along the crash barrier/approach slab edges, likely drainage spouts or expansion joint markers, spaced at 5000 (TYP.) intervals"
    },
    {
      "name": "Tree/landscaping symbols",
      "tag": "",
      "shape": "irregular circular clusters",
      "material": "",
      "count": null,
      "note": "Decorative planting symbols shown in the splayed embankment/wing areas at both ends of the plan, not a constructional item but shown for context"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "total bridge width (top and bottom)"
    },
    {
      "label": "Carriageway width",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH CARRIAGEWAY (right and left)"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY (right and left)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "FOOTPATH (both sides)"
    },
    {
      "label": "Barrier/edge offset",
      "value": "450",
      "unit": "",
      "appliesTo": "edge strip dimension, repeated at multiple locations"
    },
    {
      "label": "Offset",
      "value": "100",
      "unit": "",
      "appliesTo": "small edge strip dimension, repeated"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "",
      "appliesTo": "C/L OF MEDIAN spacing"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "",
      "appliesTo": "APPROACH SLAB (both left and right)"
    },
    {
      "label": "Barrier/marker spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "typical spacing of RCC crash barrier markers (TYP.)"
    },
    {
      "label": "Square dimension",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "unlabeled dimension near C/L of exp. joint"
    },
    {
      "label": "Skew dimension",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "unlabeled dimension near C/L of exp. joint"
    },
    {
      "label": "Square dimension",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "overall length square measurement"
    },
    {
      "label": "Skew dimension",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "overall length skew measurement"
    },
    {
      "label": "Square dimension",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "secondary length square measurement"
    },
    {
      "label": "Skew dimension",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "secondary length skew measurement"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "APPROACH SLAB",
    "C/L OF EXP. JOINT",
    "C/L OF MEDIAN",
    "C/L BRIDGE (RIGHT SIDE)",
    "C/L BRIDGE (LEFT SIDE)"
  ],
  "labels": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "A1",
    "FOOTPATH",
    "CARRIAGEWAY",
    "WIDTH CARRIAGEWAY",
    "RCC CRASH BARRIER",
    "5000 (TYP.)"
  ],
  "description": "This crop is a plan view of a bridge approach layout showing two carriageways (right side going to Dewas, left side/return to Pikaradiya) separated by a median, with footpaths, RCC crash barriers, and skewed approach slabs at the abutment/expansion joint line marked A1. Dimensions define overall width (40000), carriageway widths (16550/13500), footpath (1500), median (2900), approach slab length (3500), and barrier marker spacing (5000 TYP.), along with square and skew length callouts for the bridge. Decorative tree symbols indicate embankment/landscaped areas at both ends but are not structural elements documented in detail here."
}

p01_r05Plan

  • Carriageway×2rectangular strip13500 wide carriageway on each side (right side and left side of bridge)

40000 Overall width16550 Carriageway width13500 Carriageway width1500 Footpath width450 Barrier/edge offset100 Offset2900 Median width3500 Approach slab length+7 more

crop

p01_r02 half plan showing foundation level

page 1 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p01_r02_half_plan_showing_foundation_level
Original
p01_r02 half plan showing foundation level
{
  "view": "Plan",
  "objects": [
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular, skewed",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in half plan showing deck level; girder lines and borehole-like circles indicating beam/bearing positions"
    },
    {
      "name": "Foundation/pile cap layout",
      "tag": "",
      "shape": "rectangular, skewed",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in half plan showing foundation level with circular marks likely representing piles"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Represented as circles in grid pattern within foundation-level half plan"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Marked as C of Exp. Joint at A1 gridline"
    },
    {
      "name": "Median wall",
      "tag": "",
      "shape": "rectangular",
      "material": "PCC M15",
      "count": 1,
      "note": "Located between the two half plans"
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Labeled at both ends of deck-level half plan"
    },
    {
      "name": "Retaining/Toe wall",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Shown in key plan as RET./TOE WALL labels"
    },
    {
      "name": "Earthen drain",
      "tag": "",
      "shape": "linear",
      "material": "earth",
      "count": 1,
      "note": "Shown in key plan near river crossing"
    },
    {
      "name": "Road/carriageway",
      "tag": "TO KHANDWA",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Direction arrow labeled TO KHANDWA in both plan and key plan"
    },
    {
      "name": "River (Sipra River)",
      "tag": "",
      "shape": "natural watercourse",
      "material": "",
      "count": 1,
      "note": "Shown crossing the alignment in key plan"
    },
    {
      "name": "Borehole location marker",
      "tag": "",
      "shape": "circular with cross",
      "material": "",
      "count": null,
      "note": "Legend symbol; also may appear at other locations not fully visible in this crop"
    }
  ],
  "measurements": [
    {
      "label": "Overall length square",
      "value": "40000",
      "unit": "",
      "appliesTo": "Deck level half plan (SQ)"
    },
    {
      "label": "Overall length skew",
      "value": "46189",
      "unit": "",
      "appliesTo": "Deck level half plan (SK)"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "°",
      "appliesTo": "Bridge skew"
    },
    {
      "label": "Span width dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Deck level half plan edge"
    },
    {
      "label": "Span width dimension",
      "value": "3500",
      "unit": "",
      "appliesTo": "Deck level half plan girder spacing (x4)"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Deck level half plan"
    },
    {
      "label": "Edge dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Deck level half plan"
    },
    {
      "label": "Spacing dimension",
      "value": "3750",
      "unit": "",
      "appliesTo": "Foundation level half plan (x4, both sides)"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Foundation level half plan (both halves)"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Foundation level half plan edges"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "TYP. spacing in deck plan"
    },
    {
      "label": "Chainage",
      "value": "64+412",
      "unit": "",
      "appliesTo": "Structure location (CH.)"
    },
    {
      "label": "Chainage marker",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Key plan"
    },
    {
      "label": "Chainage marker",
      "value": "64+500",
      "unit": "",
      "appliesTo": "Key plan"
    },
    {
      "label": "Proposed span",
      "value": "2X40m",
      "unit": "m",
      "appliesTo": "Proposed structure span"
    },
    {
      "label": "Scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "Half plan showing deck/foundation level"
    },
    {
      "label": "Scale",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "Key plan"
    }
  ],
  "notes": [
    "INDEPENDENT RETAINING WALL",
    "MEDIAN WALL PCC M15",
    "TO KHANDWA",
    "℄ OF EXP. JOINT",
    "30° SKEW",
    "STRUCTURE TYPE: MJBR",
    "SKEW: 30°",
    "PROPOSAL: New Construction",
    "PROPOSED SPAN: 2X40m",
    "CH.: 64+412"
  ],
  "labels": [
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "(SCALE 1:300)",
    "KEY PLAN",
    "(SCALE 1:2000)",
    "LEGEND :",
    "BOREHOLE LOCATION",
    "RCC - REINFORCED CEMENT CONCRETE",
    "PCC - PLAIN CEMENT CONCRETE",
    "GL - GROUND LEVEL",
    "℄ - CENTER LINE",
    "FDN - FOUNDATION",
    "LVL - LEVEL",
    "ACTL - ABUTMENT CAP TOP LEVEL",
    "PCTL - PIER CAP TOP LEVEL",
    "ROW",
    "RET./TOE WALL",
    "Sipra River",
    "Earthen Drain",
    "Agriculture Land",
    "A1"
  ],
  "description": "This crop shows two half-plan views of a bridge structure at deck level and foundation level, with detailed skewed dimensions (30° skew, 16550mm width, various 3500/3750mm spacings) indicating girder and pile/foundation layout, along with a median wall and independent retaining walls at both approaches. To the right is a key plan (1:2000) showing the bridge's location crossing the Sipra River near chainage 64+400 to 64+500, flanked by ROW lines, retaining/toe walls, and an earthen drain, with a title block fragment indicating structure type MJBR, proposed span 2X40m, and new construction proposal. A legend defining abbreviations (RCC, PCC, GL, FDN, LVL, ACTL, PCTL) and borehole location symbol is also included at bottom right."
}

p01_r02 half plan showing foundation levelPlan

  • Road/carriagewayTO KHANDWA×1linearDirection arrow labeled TO KHANDWA in both plan and key plan

40000 Overall length square46189 Overall length skew30 ° Skew angle1275 Span width dimension3500 Span width dimension16550 Total width1275 Edge dimension3750 Spacing dimension+9 more