Expansion Joint

{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Marked at left with circle symbol, at centerline of expansion joint"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Marked at right with circle symbol"
    },
    {
      "name": "Crash Barrier",
      "tag": "",
      "shape": "linear/rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Labelled RCC CRASH BARRIER, runs along carriageway edge"
    },
    {
      "name": "Deck Slab / Carriageway",
      "tag": "",
      "shape": "rectangular/tapered in plan",
      "material": "",
      "count": 1,
      "note": "Shown in plan with joints/markings, width labelled"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Located adjacent to carriageway, width dimensions given"
    },
    {
      "name": "Expansion Joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline marked at A1"
    },
    {
      "name": "Drainage/Deck inlet or joint markers",
      "tag": "",
      "shape": "small square symbols",
      "material": "",
      "count": 8,
      "note": "Repeated small square symbols along carriageway, spacing 5000 TYP, possibly scuppers or expansion joint markers"
    },
    {
      "name": "Trees/Vegetation symbols",
      "tag": "",
      "shape": "circular cluster symbols",
      "material": "",
      "count": 10,
      "note": "Landscaping symbols near abutment, likely tree plantation area or embankment slope planting"
    },
    {
      "name": "Wingwall/Slope hatching",
      "tag": "",
      "shape": "tapered hatched area",
      "material": "",
      "count": 1,
      "note": "Hatched fan-shaped area near A1 indicating slope or wingwall footprint"
    }
  ],
  "measurements": [
    {
      "label": "Overall length SQ",
      "value": "40000",
      "unit": "",
      "appliesTo": "A1 to P1 span, square measurement"
    },
    {
      "label": "Overall length SK",
      "value": "46189",
      "unit": "",
      "appliesTo": "A1 to P1 span, skew measurement"
    },
    {
      "label": "Length SQ",
      "value": "37761",
      "unit": "",
      "appliesTo": "partial span measurement, square"
    },
    {
      "label": "Length SK",
      "value": "43603",
      "unit": "",
      "appliesTo": "partial span measurement, skew"
    },
    {
      "label": "Offset SQ",
      "value": "1070",
      "unit": "",
      "appliesTo": "near A1, square"
    },
    {
      "label": "Offset SK",
      "value": "1236",
      "unit": "",
      "appliesTo": "near A1, skew"
    },
    {
      "label": "Offset SQ",
      "value": "1170",
      "unit": "",
      "appliesTo": "near P1, square"
    },
    {
      "label": "Offset SK",
      "value": "1350",
      "unit": "",
      "appliesTo": "near P1, skew"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "repeated square symbols along carriageway, TYP"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "footpath section"
    },
    {
      "label": "Width dimension",
      "value": "450",
      "unit": "",
      "appliesTo": "edge strip near footpath"
    },
    {
      "label": "Width dimension",
      "value": "100",
      "unit": "",
      "appliesTo": "strip near footpath"
    },
    {
      "label": "Width dimension",
      "value": "450",
      "unit": "",
      "appliesTo": "lower left, near carriageway width label"
    },
    {
      "label": "Carriageway width",
      "value": "6550",
      "unit": "",
      "appliesTo": "width of carriageway, partially cut off (appears as '550 WIDTH')"
    },
    {
      "label": "Slab dimension",
      "value": "3500",
      "unit": "",
      "appliesTo": "slab width, near bottom left"
    },
    {
      "label": "Overall left dimension",
      "value": "40000",
      "unit": "",
      "appliesTo": "total width shown at far left vertical dimension"
    }
  ],
  "notes": [
    "TO DEWAS (direction arrow)",
    "5000 (TYP.)",
    "RCC CRASH BARRIER",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)"
  ],
  "labels": [
    "A1",
    "P1",
    "TO DEWAS",
    "FOOTPATH",
    "C BRIDGE (RIGHT SIDE)",
    "SLAB"
  ],
  "description": "This crop shows a plan view of a bridge approach and deck area between abutment A1 and pier P1, with overall span dimensions given in both square (SQ) and skew (SK) measurements. It details footpath and carriageway widths, an RCC crash barrier along the edge, typical spacing of deck elements at 5000 units, and a landscaped/vegetated area near the abutment with slope hatching, likely representing an embankment or wingwall zone."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular (skewed/angled)",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One shown on each carriageway (left and right), abutting the abutment/expansion joint line, skewed relative to carriageway"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear, rectangular in section",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Runs along both edges of carriageway; small square/rectangular markers along its length possibly denoting posts or joints"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "1500mm wide strip on either outer edge of carriageway"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "Centerline of median (C/L OF MEDIAN) separating the two carriageways, 2900 wide"
    },
    {
      "name": "Expansion joint",
      "tag": "A1",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "C/L of expansion joint marked at top, aligned with grid/section marker A1"
    },
    {
      "name": "Carriageway",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "13500 wide carriageway on each side (right side and left side of bridge)"
    },
    {
      "name": "Drainage/scupper symbols (small hatched squares)",
      "tag": "",
      "shape": "small square",
      "material": "",
      "count": 16,
      "note": "Repeated small square symbols along the crash barrier/approach slab edges, likely drainage spouts or expansion joint markers, spaced at 5000 (TYP.) intervals"
    },
    {
      "name": "Tree/landscaping symbols",
      "tag": "",
      "shape": "irregular circular clusters",
      "material": "",
      "count": null,
      "note": "Decorative planting symbols shown in the splayed embankment/wing areas at both ends of the plan, not a constructional item but shown for context"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "total bridge width (top and bottom)"
    },
    {
      "label": "Carriageway width",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH CARRIAGEWAY (right and left)"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY (right and left)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "FOOTPATH (both sides)"
    },
    {
      "label": "Barrier/edge offset",
      "value": "450",
      "unit": "",
      "appliesTo": "edge strip dimension, repeated at multiple locations"
    },
    {
      "label": "Offset",
      "value": "100",
      "unit": "",
      "appliesTo": "small edge strip dimension, repeated"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "",
      "appliesTo": "C/L OF MEDIAN spacing"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "",
      "appliesTo": "APPROACH SLAB (both left and right)"
    },
    {
      "label": "Barrier/marker spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "typical spacing of RCC crash barrier markers (TYP.)"
    },
    {
      "label": "Square dimension",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "unlabeled dimension near C/L of exp. joint"
    },
    {
      "label": "Skew dimension",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "unlabeled dimension near C/L of exp. joint"
    },
    {
      "label": "Square dimension",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "overall length square measurement"
    },
    {
      "label": "Skew dimension",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "overall length skew measurement"
    },
    {
      "label": "Square dimension",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "secondary length square measurement"
    },
    {
      "label": "Skew dimension",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "secondary length skew measurement"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "APPROACH SLAB",
    "C/L OF EXP. JOINT",
    "C/L OF MEDIAN",
    "C/L BRIDGE (RIGHT SIDE)",
    "C/L BRIDGE (LEFT SIDE)"
  ],
  "labels": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "A1",
    "FOOTPATH",
    "CARRIAGEWAY",
    "WIDTH CARRIAGEWAY",
    "RCC CRASH BARRIER",
    "5000 (TYP.)"
  ],
  "description": "This crop is a plan view of a bridge approach layout showing two carriageways (right side going to Dewas, left side/return to Pikaradiya) separated by a median, with footpaths, RCC crash barriers, and skewed approach slabs at the abutment/expansion joint line marked A1. Dimensions define overall width (40000), carriageway widths (16550/13500), footpath (1500), median (2900), approach slab length (3500), and barrier marker spacing (5000 TYP.), along with square and skew length callouts for the bridge. Decorative tree symbols indicate embankment/landscaped areas at both ends but are not structural elements documented in detail here."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Pier/Pier cap",
      "tag": "P1",
      "shape": "skewed rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "marked at top left, deck level plan side"
    },
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "skewed rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "marked at top right with centerline of expansion joint noted"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "runs along both edges of deck in deck-level half plan"
    },
    {
      "name": "Pile / foundation element",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 18,
      "note": "shown as circles in foundation-level half plan, arranged in skewed grid rows"
    },
    {
      "name": "Deck slab girders/beams (shown as parallel lines)",
      "tag": "",
      "shape": "rectangular/tapered",
      "material": "reinforced concrete",
      "count": null,
      "note": "multiple parallel lines representing girder layout in deck-level plan"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "centerline of expansion joint noted near A1"
    },
    {
      "name": "Median/paved shoulder area",
      "tag": "",
      "shape": "trapezoidal",
      "material": "",
      "count": 1,
      "note": "partial label 'MEDI...P...' visible near right side, likely median or paved shoulder"
    },
    {
      "name": "Drainage/scupper symbols",
      "tag": "",
      "shape": "small square/diamond",
      "material": "",
      "count": 6,
      "note": "symbols along bottom edge of deck-level plan, possibly weep holes or drain spouts"
    }
  ],
  "measurements": [
    {
      "label": "Overall span (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "deck plan, P1 to A1"
    },
    {
      "label": "Overall span (skew)",
      "value": "46189",
      "unit": "",
      "appliesTo": "deck plan, P1 to A1"
    },
    {
      "label": "Offset at P1 (square)",
      "value": "1170",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Offset at P1 (skew)",
      "value": "1350",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Girder spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "deck level plan, repeated 4 times"
    },
    {
      "label": "Total width (deck level)",
      "value": "16550",
      "unit": "",
      "appliesTo": "deck level plan cross dimension"
    },
    {
      "label": "Offset (square) top",
      "value": "1275",
      "unit": "",
      "appliesTo": "deck level plan edge offset"
    },
    {
      "label": "Offset (square) bottom",
      "value": "1275",
      "unit": "",
      "appliesTo": "deck level plan edge offset"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "deck geometry, skew callout"
    },
    {
      "label": "Barrier/beam spacing typical",
      "value": "5000",
      "unit": "",
      "appliesTo": "RCC crash barrier / beam spacing, typical"
    },
    {
      "label": "Pile spacing",
      "value": "3750",
      "unit": "",
      "appliesTo": "foundation level plan, repeated 4 times"
    },
    {
      "label": "Total width (foundation level)",
      "value": "16550",
      "unit": "",
      "appliesTo": "foundation level plan cross dimension"
    },
    {
      "label": "Offset (foundation level) top",
      "value": "775",
      "unit": "",
      "appliesTo": "foundation level plan edge offset"
    },
    {
      "label": "Offset (foundation level) bottom",
      "value": "775",
      "unit": "",
      "appliesTo": "foundation level plan edge offset"
    },
    {
      "label": "Scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "drawing scale"
    }
  ],
  "notes": [
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "(SCALE 1:300)",
    "30° SKEW",
    "5000 (TYP.)"
  ],
  "labels": [
    "P1",
    "A1",
    "TO KHANDWA",
    "C OF EXP. JOINT",
    "RCC CRASH BARRIER",
    "INDEPENDENT R... (partial, cut off)",
    "MEDI... P... (partial, cut off)"
  ],
  "description": "This crop shows two half-plan drawings of a skewed bridge span between pier P1 and abutment A1: the left half depicts the deck level with crash barriers, girder lines, and drainage symbols along a 30° skewed edge, while the right half shows the foundation level with a grid of circular pile marks at a skew, both plans dimensioned in millimeters with overall span, offsets, and spacing values. The drawing documents the deck layout and corresponding foundation/pile arrangement for a single span, including skew geometry and edge offsets, but does not show the full width of the bridge (only one half plan of each level is presented)."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Crash Barrier",
      "tag": "",
      "shape": "linear (rectangular in section, RCC parapet type)",
      "material": "reinforced concrete",
      "count": 1,
      "note": "labelled RCC CRASH BARRIER, runs along edge of deck"
    },
    {
      "name": "Pier/Support Marker",
      "tag": "P1",
      "shape": "circular marker",
      "material": "",
      "count": 1,
      "note": "circled tag denoting a pier or reference point at skewed edge"
    },
    {
      "name": "Drainage Inlet/Scupper",
      "tag": "",
      "shape": "small rectangular symbol with cross hatch",
      "material": "",
      "count": 4,
      "note": "repeated symbols spaced at 5000 (TYP.) along the barrier line, likely deck drainage outlets"
    },
    {
      "name": "Deck Joint/Expansion Marker",
      "tag": "",
      "shape": "small square with diagonal hatch",
      "material": "",
      "count": 3,
      "note": "square markers along skewed edge, possibly bearing or joint locations"
    },
    {
      "name": "Approach/Deck Slab Lines",
      "tag": "",
      "shape": "parallel linear lines",
      "material": "",
      "count": null,
      "note": "multiple parallel lines representing lane/deck edges or reinforcement layout, partially visible"
    }
  ],
  "measurements": [
    {
      "label": "46189(SK)",
      "value": "46189",
      "unit": "",
      "appliesTo": "overall skew dimension line, top"
    },
    {
      "label": "43603(SK)",
      "value": "43603",
      "unit": "",
      "appliesTo": "skew dimension line, second from top"
    },
    {
      "label": "1170(SQ)",
      "value": "1170",
      "unit": "",
      "appliesTo": "square dimension near P1"
    },
    {
      "label": "1350(SK)",
      "value": "1350",
      "unit": "",
      "appliesTo": "skew dimension near P1"
    },
    {
      "label": "5000 (TYP.)",
      "value": "5000",
      "unit": "",
      "appliesTo": "typical spacing of drainage/inlet symbols along barrier"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER"
  ],
  "labels": [
    "46189(SK)",
    "43603(SK)",
    "1170(SQ)",
    "1350(SK)",
    "5000 (TYP.)",
    "P1"
  ],
  "description": "This crop shows a partial plan view of a bridge deck edge featuring an RCC crash barrier running along the top edge, with repeated drainage/inlet symbols spaced at a typical 5000 unit interval. A circled reference point labelled P1 marks a skewed dimension line near the right edge, with associated square (SQ) and skew (SK) dimensions. The view appears to be a fragment of a larger deck plan, showing only the barrier line and part of the deck geometry without full structural context."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Located at left end of bridge deck, centerline of expansion joint marked at this location"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Intermediate support shown on right side of plan"
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular (skewed)",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Two carriageways shown, right side and left side of bridge"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear",
      "material": "reinforced concrete",
      "count": 4,
      "note": "Runs along edges of carriageways and median side"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown at both approach ends adjacent to abutment/embankment"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Located at outer edges of each carriageway"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "Centerline of median shown between the two bridge carriageways"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline of expansion joint marked at abutment A1"
    },
    {
      "name": "Embankment/slope protection area",
      "tag": "",
      "shape": "fan/radial pattern",
      "material": "",
      "count": 2,
      "note": "Shown as planting/turfing pattern at both approach ends beyond abutment and pier extents"
    }
  ],
  "measurements": [
    {
      "label": "ROW width",
      "value": "80000",
      "unit": "",
      "appliesTo": "overall right-of-way"
    },
    {
      "label": "Width (each side)",
      "value": "40000",
      "unit": "",
      "appliesTo": "one carriageway side width"
    },
    {
      "label": "Bridge width",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH label, right side"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY, right side"
    },
    {
      "label": "Footpath dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "footpath, right side"
    },
    {
      "label": "Kerb offset",
      "value": "100",
      "unit": "",
      "appliesTo": "footpath adjacent dimension"
    },
    {
      "label": "Barrier offset",
      "value": "450",
      "unit": "",
      "appliesTo": "crash barrier position, repeated multiple locations"
    },
    {
      "label": "Median offset",
      "value": "2900",
      "unit": "",
      "appliesTo": "centerline of median dimension"
    },
    {
      "label": "Width (left side)",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH label, left side"
    },
    {
      "label": "Carriageway width (left)",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY, left side"
    },
    {
      "label": "Span/typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "TYP. spacing between markings/barrier posts"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "",
      "appliesTo": "Approach slab dimension"
    },
    {
      "label": "Overall square length",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "deck span between A1 and P1, square measurement"
    },
    {
      "label": "Overall skew length",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "deck span between A1 and P1, skew measurement"
    },
    {
      "label": "Span length square",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "span between A1 and P1 centerlines, square"
    },
    {
      "label": "Span length skew",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "span between A1 and P1 centerlines, skew"
    },
    {
      "label": "Offset square",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "expansion joint offset at A1, square"
    },
    {
      "label": "Offset skew",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "expansion joint offset at A1, skew"
    },
    {
      "label": "Offset square",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "offset at P1, square"
    },
    {
      "label": "Offset skew",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "offset at P1, skew"
    },
    {
      "label": "Segment spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "repeated girder/beam spacing along right side, four instances"
    },
    {
      "label": "Segment spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "repeated girder/beam spacing along left side, four instances"
    },
    {
      "label": "Total width dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "overall width right side, repeated"
    },
    {
      "label": "Edge offset",
      "value": "1275",
      "unit": "",
      "appliesTo": "edge dimension near P1 and far right/bottom edges, multiple instances"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "skew angle at P1 support line"
    }
  ],
  "notes": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "30° SKEW",
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWI[NG...] (text cut off)",
    "(SCALE 1:300)"
  ],
  "labels": [
    "A1",
    "P1",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)",
    "C BRIDGE (LEFT SIDE)",
    "C OF MEDIAN",
    "APPROACH SLAB",
    "RCC CRASH BARRIER",
    "FOOTPATH",
    "WIDTH",
    "CARRIAGEWAY",
    "ROW"
  ],
  "description": "This crop is a half plan view of a bridge deck at deck level, showing two parallel carriageways (right side toward Dewas and left side toward Pikaradiya) separated by a median, with abutment A1 at one end and pier P1 at the other end at a 30° skew angle. It documents overall geometry including carriageway widths, footpath widths, RCC crash barrier locations, approach slab dimensions, and span lengths given in both square and skew measurements; embankment/turfed slope areas are shown schematically beyond the abutment and pier lines. The drawing is a plan-level layout, not an elevation or section, and the right-hand edge of the sheet appears cropped, cutting off part of the title text."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Foundation piles/borehole grid pattern (circular marks in skewed plan)",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Rows of circles shown within the skewed deck/foundation plan bays, spacing labeled 3750 between rows; likely pile or borehole locations, unclear which without more context"
    },
    {
      "name": "Independent Retaining Wall",
      "tag": "",
      "shape": "rectangular/linear",
      "material": "",
      "count": 2,
      "note": "Labeled at the upper right edge of both skewed foundation-level plan panels"
    },
    {
      "name": "Median Wall",
      "tag": "",
      "shape": "rectangular/linear",
      "material": "PCC M15 (Plain Cement Concrete)",
      "count": 1,
      "note": "Located between the two foundation-level plan panels, at the median gap"
    },
    {
      "name": "Expansion Joint (centerline marker)",
      "tag": "A1",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Marked as centerline of expansion joint at top of deck-level plan"
    },
    {
      "name": "Retaining/Toe Wall (Key Plan)",
      "tag": "RET./TOE WALL",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Shown twice in Key Plan along the roadway alignment"
    },
    {
      "name": "Road/Right-of-Way boundary lines",
      "tag": "ROW",
      "shape": "linear",
      "material": "",
      "count": 4,
      "note": "Multiple ROW labels along the alignment in Key Plan"
    },
    {
      "name": "Borehole location markers",
      "tag": "",
      "shape": "circular with cross",
      "material": "",
      "count": null,
      "note": "Legend symbol defined; actual locations not clearly counted in this crop"
    }
  ],
  "measurements": [
    {
      "label": "Overall length (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "deck plan, SQ dimension"
    },
    {
      "label": "Overall length (skew)",
      "value": "46189",
      "unit": "",
      "appliesTo": "deck plan, SK dimension"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "bridge skew"
    },
    {
      "label": "Bay spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "deck level plan, repeated 4 times"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "deck level plan, overall transverse dimension"
    },
    {
      "label": "Edge dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "deck level plan, edge strip"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "deck plan, marked TYP."
    },
    {
      "label": "Bay spacing",
      "value": "3750",
      "unit": "",
      "appliesTo": "foundation level plan, repeated 4 times per panel"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "foundation level plan, overall transverse dimension"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "foundation level plan, edge strip, repeated 2 times per panel"
    },
    {
      "label": "Scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "Half Plan Showing Deck Level / Foundation Level"
    },
    {
      "label": "Scale",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "Key Plan"
    },
    {
      "label": "Proposed Chainage",
      "value": "64+412",
      "unit": "",
      "appliesTo": "Key Plan data box"
    },
    {
      "label": "Structure Type",
      "value": "MJBR",
      "unit": "",
      "appliesTo": "Key Plan data box"
    },
    {
      "label": "Skew",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "Key Plan data box"
    },
    {
      "label": "Proposed Span",
      "value": "2X40m",
      "unit": "",
      "appliesTo": "Key Plan data box"
    },
    {
      "label": "Chainage marker",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Key Plan"
    },
    {
      "label": "Chainage marker",
      "value": "64+500",
      "unit": "",
      "appliesTo": "Key Plan"
    }
  ],
  "notes": [
    "INDEPENDENT RETAINING WALL",
    "MEDIAN WALL PCC M15",
    "TO KHANDWA",
    "PROPOSAL: New Construction",
    "STRUCTURE TYPE: MJBR",
    "PROPOSED SPAN: 2X40m",
    "SKEW: 30°"
  ],
  "labels": [
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "KEY PLAN",
    "LEGEND",
    "ROW",
    "RET./TOE WALL",
    "C OF EXP. JOINT",
    "A1"
  ],
  "description": "This crop shows two half-plan views of a skewed bridge deck (upper) and its foundation level (lower), both at scale 1:300, alongside a small-scale Key Plan (1:2000) locating the structure along a road alignment near a river crossing with ROW and retaining/toe wall annotations. A legend at bottom right defines abbreviations for RCC, PCC, ground level, centerline, foundation, and cap top levels. Dimensions given include overall skewed length, bay spacings, and edge strips for both deck and foundation plans, along with a proposed 2x40m span structure at chainage 64+412 with a 30° skew."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Pile foundation (piles shown in plan, skewed grid)",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Shown as circles in a skewed grid pattern under two half-plan panels labelled foundation level"
    },
    {
      "name": "Retaining wall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Labelled 'INDEPENDENT RETAINING WALL', one at top and one at bottom of the skewed panels"
    },
    {
      "name": "Median wall",
      "tag": "",
      "shape": "rectangular (narrow strip)",
      "material": "PCC M15",
      "count": 1,
      "note": "Located between the two skewed deck/foundation panels, labelled 'MEDIAN WALL PCC M15'"
    },
    {
      "name": "Expansion joint centerline marker",
      "tag": "A1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Labelled 'C OF EXP. JOINT' with circled tag A1"
    },
    {
      "name": "Bearing/pile cap markers (small squares in lower left partial view)",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 4,
      "note": "Small square markers along the edge of the lower-left partial skewed panel, possibly bearing or joint locations"
    },
    {
      "name": "Direction sign/callout",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Arrow with text 'TO KHANDWA'"
    },
    {
      "name": "Key Plan roadway alignment",
      "tag": "",
      "shape": "linear/curved",
      "material": "",
      "count": 1,
      "note": "Shown in separate Key Plan inset at top right, showing road, river (Sipra River), ROW lines, drain, and RET./TOE WALL"
    },
    {
      "name": "Toe wall / retaining wall (Key Plan)",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Labelled 'RET./TOE WALL' in Key Plan inset"
    }
  ],
  "measurements": [
    {
      "label": "Overall length (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "Bridge/structure plan"
    },
    {
      "label": "Overall length (skew)",
      "value": "46189",
      "unit": "",
      "appliesTo": "Bridge/structure plan"
    },
    {
      "label": "Edge dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Panel edge, top left"
    },
    {
      "label": "Edge dimension",
      "value": "3500",
      "unit": "",
      "appliesTo": "Repeated segment, left side vertical dimension chain (5 times)"
    },
    {
      "label": "Cumulative dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "Left vertical dimension chain, foundation panel"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Top edge of upper skewed panel"
    },
    {
      "label": "Repeated segment",
      "value": "3750",
      "unit": "",
      "appliesTo": "Upper skewed panel, vertical dimension chain (4 times)"
    },
    {
      "label": "Cumulative dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "Upper skewed panel vertical total"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Bottom edge of upper skewed panel / top edge of lower skewed panel"
    },
    {
      "label": "Repeated segment",
      "value": "3750",
      "unit": "",
      "appliesTo": "Lower skewed panel, vertical dimension chain (4 times)"
    },
    {
      "label": "Cumulative dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "Lower skewed panel vertical total"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Bottom edge of lower skewed panel"
    },
    {
      "label": "Edge dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Bottom left partial panel edge"
    },
    {
      "label": "Repeated segment",
      "value": "3500",
      "unit": "",
      "appliesTo": "Lower left partial panel vertical dimension chain (4 times)"
    },
    {
      "label": "Cumulative dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "Lower left partial panel vertical total"
    },
    {
      "label": "Scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "Half plan showing foundation level"
    },
    {
      "label": "Scale",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "Key Plan"
    },
    {
      "label": "Structure chainage",
      "value": "64+412",
      "unit": "",
      "appliesTo": "Title block / structure CH"
    },
    {
      "label": "Proposed span",
      "value": "2X40m",
      "unit": "m",
      "appliesTo": "Title block / proposed span"
    },
    {
      "label": "Skew",
      "value": "30°",
      "unit": "",
      "appliesTo": "Title block / skew"
    },
    {
      "label": "Chainage marker",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Key Plan alignment"
    },
    {
      "label": "Chainage marker",
      "value": "64+500",
      "unit": "",
      "appliesTo": "Key Plan alignment"
    }
  ],
  "notes": [
    "INDEPENDENT RETAINING WALL",
    "MEDIAN WALL PCC M15",
    "C OF EXP. JOINT",
    "TO KHANDWA",
    "PROPOSED SPAN 2X40m",
    "SKEW 30°",
    "PROPOSAL New Construction",
    "STRUCTURE TYPE MJBR",
    "STRUCTURE CH: 64+412"
  ],
  "labels": [
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "(SCALE 1:300)",
    "KEY PLAN",
    "(SCALE 1:2000)",
    "RET./TOE WALL",
    "ROW",
    "A1",
    "ING DECK LEVEL"
  ],
  "description": "This crop shows a partial site/foundation plan for a bridge structure, specifically a 'half plan showing foundation level' at scale 1:300 with skewed dimension grids (16550 total, subdivided into 3750/3500 segments) indicating pile locations, flanked by independent retaining walls and a median wall (PCC M15) between two carriageway panels. An inset 'Key Plan' at scale 1:2000 in the upper right shows the roadway alignment near chainage 64+400 to 64+500 crossing what appears to be the Sipra River, with ROW (right-of-way) lines and a retaining/toe wall, alongside a partial title block giving structure chainage 64+412, proposed span 2x40m, skew 30°, and proposal type 'New Construction'."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular, skewed",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in half plan showing deck level; girder lines and borehole-like circles indicating beam/bearing positions"
    },
    {
      "name": "Foundation/pile cap layout",
      "tag": "",
      "shape": "rectangular, skewed",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in half plan showing foundation level with circular marks likely representing piles"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Represented as circles in grid pattern within foundation-level half plan"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Marked as C of Exp. Joint at A1 gridline"
    },
    {
      "name": "Median wall",
      "tag": "",
      "shape": "rectangular",
      "material": "PCC M15",
      "count": 1,
      "note": "Located between the two half plans"
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Labeled at both ends of deck-level half plan"
    },
    {
      "name": "Retaining/Toe wall",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Shown in key plan as RET./TOE WALL labels"
    },
    {
      "name": "Earthen drain",
      "tag": "",
      "shape": "linear",
      "material": "earth",
      "count": 1,
      "note": "Shown in key plan near river crossing"
    },
    {
      "name": "Road/carriageway",
      "tag": "TO KHANDWA",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Direction arrow labeled TO KHANDWA in both plan and key plan"
    },
    {
      "name": "River (Sipra River)",
      "tag": "",
      "shape": "natural watercourse",
      "material": "",
      "count": 1,
      "note": "Shown crossing the alignment in key plan"
    },
    {
      "name": "Borehole location marker",
      "tag": "",
      "shape": "circular with cross",
      "material": "",
      "count": null,
      "note": "Legend symbol; also may appear at other locations not fully visible in this crop"
    }
  ],
  "measurements": [
    {
      "label": "Overall length square",
      "value": "40000",
      "unit": "",
      "appliesTo": "Deck level half plan (SQ)"
    },
    {
      "label": "Overall length skew",
      "value": "46189",
      "unit": "",
      "appliesTo": "Deck level half plan (SK)"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "°",
      "appliesTo": "Bridge skew"
    },
    {
      "label": "Span width dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Deck level half plan edge"
    },
    {
      "label": "Span width dimension",
      "value": "3500",
      "unit": "",
      "appliesTo": "Deck level half plan girder spacing (x4)"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Deck level half plan"
    },
    {
      "label": "Edge dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Deck level half plan"
    },
    {
      "label": "Spacing dimension",
      "value": "3750",
      "unit": "",
      "appliesTo": "Foundation level half plan (x4, both sides)"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Foundation level half plan (both halves)"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Foundation level half plan edges"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "TYP. spacing in deck plan"
    },
    {
      "label": "Chainage",
      "value": "64+412",
      "unit": "",
      "appliesTo": "Structure location (CH.)"
    },
    {
      "label": "Chainage marker",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Key plan"
    },
    {
      "label": "Chainage marker",
      "value": "64+500",
      "unit": "",
      "appliesTo": "Key plan"
    },
    {
      "label": "Proposed span",
      "value": "2X40m",
      "unit": "m",
      "appliesTo": "Proposed structure span"
    },
    {
      "label": "Scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "Half plan showing deck/foundation level"
    },
    {
      "label": "Scale",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "Key plan"
    }
  ],
  "notes": [
    "INDEPENDENT RETAINING WALL",
    "MEDIAN WALL PCC M15",
    "TO KHANDWA",
    "℄ OF EXP. JOINT",
    "30° SKEW",
    "STRUCTURE TYPE: MJBR",
    "SKEW: 30°",
    "PROPOSAL: New Construction",
    "PROPOSED SPAN: 2X40m",
    "CH.: 64+412"
  ],
  "labels": [
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "(SCALE 1:300)",
    "KEY PLAN",
    "(SCALE 1:2000)",
    "LEGEND :",
    "BOREHOLE LOCATION",
    "RCC - REINFORCED CEMENT CONCRETE",
    "PCC - PLAIN CEMENT CONCRETE",
    "GL - GROUND LEVEL",
    "℄ - CENTER LINE",
    "FDN - FOUNDATION",
    "LVL - LEVEL",
    "ACTL - ABUTMENT CAP TOP LEVEL",
    "PCTL - PIER CAP TOP LEVEL",
    "ROW",
    "RET./TOE WALL",
    "Sipra River",
    "Earthen Drain",
    "Agriculture Land",
    "A1"
  ],
  "description": "This crop shows two half-plan views of a bridge structure at deck level and foundation level, with detailed skewed dimensions (30° skew, 16550mm width, various 3500/3750mm spacings) indicating girder and pile/foundation layout, along with a median wall and independent retaining walls at both approaches. To the right is a key plan (1:2000) showing the bridge's location crossing the Sipra River near chainage 64+400 to 64+500, flanked by ROW lines, retaining/toe walls, and an earthen drain, with a title block fragment indicating structure type MJBR, proposed span 2X40m, and new construction proposal. A legend defining abbreviations (RCC, PCC, GL, FDN, LVL, ACTL, PCTL) and borehole location symbol is also included at bottom right."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at left end of bridge, at expansion joint centerline"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at right end of shown span"
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular (skewed)",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in half plan at deck level, skewed 30°"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One on right-side carriageway approach, one on left-side carriageway approach"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear",
      "material": "reinforced concrete",
      "count": 4,
      "note": "Running along both edges of both carriageways"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "At centerline near abutment A1"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "On both outer edges of the deck, at top and bottom of plan"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline of median between left and right bridge carriageways"
    },
    {
      "name": "Girders (deck beams)",
      "tag": "",
      "shape": "longitudinal parallel lines",
      "material": "",
      "count": null,
      "note": "Shown as multiple parallel lines representing girder layout beneath deck, spaced at 3500 typical"
    },
    {
      "name": "Tree/landscape symbols",
      "tag": "",
      "shape": "circular clusters",
      "material": "",
      "count": null,
      "note": "Decorative landscaping symbols shown near abutment approach areas, not a constructional item but shown for context"
    }
  ],
  "measurements": [
    {
      "label": "Overall ROW width",
      "value": "80000",
      "unit": "",
      "appliesTo": "Right of way"
    },
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "Bridge cross width (top)"
    },
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "Bridge cross width (bottom)"
    },
    {
      "label": "Span length (square)",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "Span between A1 and P1, square measurement"
    },
    {
      "label": "Span length (skew)",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "Span between A1 and P1, skew measurement"
    },
    {
      "label": "Span length (square) right side",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "Span beyond P1, square measurement"
    },
    {
      "label": "Span length (skew) right side",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "Span beyond P1, skew measurement"
    },
    {
      "label": "Distance (square)",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "Distance between expansion joint and P1 area"
    },
    {
      "label": "Distance (skew)",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "Distance between expansion joint and P1 area (skew)"
    },
    {
      "label": "Offset (square)",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "Near abutment A1, expansion joint offset"
    },
    {
      "label": "Offset (skew)",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "Near abutment A1, expansion joint offset (skew)"
    },
    {
      "label": "Offset (square)",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "Near pier P1"
    },
    {
      "label": "Offset (skew)",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "Near pier P1 (skew)"
    },
    {
      "label": "Spacing (typical)",
      "value": "5000",
      "unit": "",
      "appliesTo": "RCC crash barrier post spacing, typical"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "Carriageway (both sides)"
    },
    {
      "label": "Width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Bridge width (both carriageways)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "Footpath"
    },
    {
      "label": "Dimension",
      "value": "450",
      "unit": "",
      "appliesTo": "Edge strip near footpath/crash barrier"
    },
    {
      "label": "Dimension",
      "value": "100",
      "unit": "",
      "appliesTo": "Edge strip near footpath/crash barrier"
    },
    {
      "label": "Median offset",
      "value": "2900",
      "unit": "",
      "appliesTo": "Centerline of median"
    },
    {
      "label": "Girder spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "Approach slab / girder spacing, repeated multiple times"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "Bridge skew angle at P1"
    },
    {
      "label": "Offset",
      "value": "1275",
      "unit": "",
      "appliesTo": "Edge offset near P1, top and bottom"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "5000 (TYP.)",
    "30° SKEW",
    "HALF PLAN SHOWING DECK LEVEL (SCALE 1:300)"
  ],
  "labels": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "A1",
    "P1",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)",
    "C BRIDGE (LEFT SIDE)",
    "C OF MEDIAN",
    "APPROACH SLAB",
    "FOOTPATH",
    "CARRIAGEWAY",
    "WIDTH",
    "ROW",
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOW..."
  ],
  "description": "This crop shows a half-plan view at deck level of a skewed highway bridge between abutment A1 and pier P1, with the corresponding half plan on the far side extending beyond P1. It details the carriageway widths, footpaths, median, RCC crash barriers, approach slabs, and the 30° skew angle, along with square and skew dimensions for span lengths and offsets. The drawing also indicates directional references 'TO DEWAS' and 'TO PIKARADIYA' and shows landscaped areas near both abutment approaches."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "marked with circle symbol, at expansion joint centerline"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "marked with circle symbol at far right"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "centerline shown at A1"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear",
      "material": "reinforced concrete",
      "count": 1,
      "note": "runs along edge of carriageway, callout labeled"
    },
    {
      "name": "Deck slab",
      "tag": "SLAB",
      "shape": "rectangular/skewed",
      "material": "",
      "count": 1,
      "note": "labeled centerline dimension 3500 shown near slab edge"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "width 1500 shown with hatching pattern"
    },
    {
      "name": "Expansion joint markers",
      "tag": "",
      "shape": "small square symbols",
      "material": "",
      "count": 9,
      "note": "repeated small square symbols spaced along deck, likely joint/drainage or bearing markers"
    },
    {
      "name": "Landscaping/tree symbols",
      "tag": "",
      "shape": "circular cluster symbols",
      "material": "",
      "count": 8,
      "note": "decorative planting shown in fan-shaped area near abutment"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "cross-section width at left edge"
    },
    {
      "label": "Footpath offset",
      "value": "450",
      "unit": "",
      "appliesTo": "footpath edge dimension"
    },
    {
      "label": "Gap dimension",
      "value": "100",
      "unit": "",
      "appliesTo": "small gap near footpath"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "FOOTPATH"
    },
    {
      "label": "Carriageway width",
      "value": "450",
      "unit": "",
      "appliesTo": "below footpath, partial label '...50 WIDTH ...RRIAGEWAY'"
    },
    {
      "label": "Slab offset",
      "value": "3500",
      "unit": "",
      "appliesTo": "SLAB centerline dimension"
    },
    {
      "label": "Span square length",
      "value": "40000",
      "unit": "",
      "appliesTo": "A1 to P1, (SQ)"
    },
    {
      "label": "Span skew length",
      "value": "46189",
      "unit": "",
      "appliesTo": "A1 to P1, (SK)"
    },
    {
      "label": "Span square length (inner)",
      "value": "37761",
      "unit": "",
      "appliesTo": "between A1 and P1, (SQ)"
    },
    {
      "label": "Span skew length (inner)",
      "value": "43603",
      "unit": "",
      "appliesTo": "between A1 and P1, (SK)"
    },
    {
      "label": "Offset square",
      "value": "1070",
      "unit": "",
      "appliesTo": "near A1, (SQ)"
    },
    {
      "label": "Offset skew",
      "value": "1236",
      "unit": "",
      "appliesTo": "near A1, (SK)"
    },
    {
      "label": "Offset square",
      "value": "1170",
      "unit": "",
      "appliesTo": "near P1, (SQ)"
    },
    {
      "label": "Offset skew",
      "value": "1350",
      "unit": "",
      "appliesTo": "near P1, (SK)"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "TYP. spacing of deck markers/joints"
    }
  ],
  "notes": [
    "TO DEWAS",
    "C OF EXP. JOINT",
    "RCC CRASH BARRIER",
    "5000 (TYP.)",
    "FOOTPATH",
    "C BRIDGE (RIGHT SIDE)"
  ],
  "labels": [
    "A1",
    "P1",
    "SLAB",
    "40000",
    "450",
    "100",
    "1500",
    "3500",
    "40000(SQ)",
    "46189(SK)",
    "37761(SQ)",
    "43603(SK)",
    "1070(SQ)",
    "1236(SK)",
    "1170(SQ)",
    "1350(SK)",
    "5000 (TYP.)"
  ],
  "description": "This crop shows a plan view of a bridge deck between abutment A1 and pier P1, including centerline dimensions along the skew and square directions, an expansion joint centerline at A1, footpath and carriageway widths, an RCC crash barrier along the deck edge, and a landscaped fan-shaped area with tree symbols near the abutment approach. Small square symbols spaced at 5000 units (TYP.) along the deck likely represent drainage spouts or joint markers. The label 'TO DEWAS' with an arrow indicates the direction of the roadway alignment at the top left of the drawing."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "rectangular, skewed alignment",
      "material": "reinforced concrete",
      "count": 1,
      "note": "marked with detail bubble A1 at centerline of expansion joint"
    },
    {
      "name": "Approach Slab",
      "tag": "",
      "shape": "rectangular, skewed",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one each for right and left carriageway"
    },
    {
      "name": "Expansion Joint",
      "tag": "",
      "shape": "linear, skewed",
      "material": "",
      "count": 1,
      "note": "centerline shown at abutment A1, dimensions 1070(SQ)/1236(SK)"
    },
    {
      "name": "RCC Crash Barrier",
      "tag": "",
      "shape": "linear, rectangular section",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one along median edge, one along outer edge; callout leader shown"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 2,
      "note": "1500mm wide footpaths on outer edges of both carriageways"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "centerline of median between two carriageways, width 2900"
    },
    {
      "name": "Drainage Inlet / Scupper",
      "tag": "",
      "shape": "small square symbol",
      "material": "",
      "count": 10,
      "note": "repeated small square symbols along carriageway edges, likely drainage spouts/scuppers"
    },
    {
      "name": "Trees/Vegetation",
      "tag": "",
      "shape": "irregular clusters",
      "material": "",
      "count": null,
      "note": "shown symbolically at both approach ends, not a constructional item but indicates existing ground/landscape"
    },
    {
      "name": "Expansion Joint Marks (Small triangular symbols)",
      "tag": "",
      "shape": "triangular symbols in a row",
      "material": "",
      "count": 7,
      "note": "repeated symbols along top edge of carriageway, likely joint or marker locations"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "mm",
      "appliesTo": "cross-section width, both sides"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "Footpath"
    },
    {
      "label": "Kerb/edge strip",
      "value": "100",
      "unit": "mm",
      "appliesTo": "edge strip adjacent to footpath"
    },
    {
      "label": "Crash barrier offset",
      "value": "450",
      "unit": "mm",
      "appliesTo": "RCC Crash Barrier position, repeated multiple locations"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "mm",
      "appliesTo": "Carriageway (right and left)"
    },
    {
      "label": "Bridge width (right/left)",
      "value": "16550",
      "unit": "mm",
      "appliesTo": "Bridge width, right and left side"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "mm",
      "appliesTo": "Median"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "mm",
      "appliesTo": "Approach Slab, both sides"
    },
    {
      "label": "Expansion joint offset (square)",
      "value": "1070",
      "unit": "mm",
      "appliesTo": "Expansion Joint (SQ)"
    },
    {
      "label": "Expansion joint offset (skew)",
      "value": "1236",
      "unit": "mm",
      "appliesTo": "Expansion Joint (SK)"
    },
    {
      "label": "Overall dimension (square)",
      "value": "40000",
      "unit": "mm",
      "appliesTo": "overall plan dimension SQ"
    },
    {
      "label": "Overall dimension (skew)",
      "value": "46189",
      "unit": "mm",
      "appliesTo": "overall plan dimension SK"
    },
    {
      "label": "Secondary overall dimension (square)",
      "value": "37761",
      "unit": "mm",
      "appliesTo": "secondary plan dimension SQ"
    },
    {
      "label": "Secondary overall dimension (skew)",
      "value": "43603",
      "unit": "mm",
      "appliesTo": "secondary plan dimension SK"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "mm",
      "appliesTo": "repeated spacing marks along carriageway (TYP.)"
    }
  ],
  "notes": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "5000 (TYP.)",
    "RCC CRA... (truncated, likely 'RCC CRASH BARRIER')",
    "RCC CRASH BARRIER"
  ],
  "labels": [
    "A1",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)",
    "C BRIDGE (LEFT SIDE)",
    "C OF MEDIAN",
    "APPROACH SLAB",
    "FOOTPATH",
    "16550 WIDTH",
    "13500 CARRIAGEWAY"
  ],
  "description": "This crop shows a plan view of a bridge deck and its approach slabs at abutment A1, including dimensions for carriageway widths, footpaths, median, and expansion joint offsets for both square (SQ) and skew (SK) alignments. It also shows RCC crash barriers along both carriageways and directional labels indicating traffic flow toward Dewas and Pikaradiya. The drawing is a fragment of a larger bridge general arrangement plan, focusing on one end (abutment A1) with symbolic tree/vegetation representation at both approach ends."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "circular (in plan)",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Marked at top of deck-level plan, at skewed end of span"
    },
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Marked at top of foundation-level plan, near expansion joint centerline"
    },
    {
      "name": "Crash barrier",
      "tag": "",
      "shape": "rectangular (in plan, linear)",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown along both edges of deck in deck-level plan, labeled RCC CRASH BARRIER and CRASH BARRIER"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 24,
      "note": "Circular piles shown in foundation-level half plan, arranged in rows"
    },
    {
      "name": "Bearing/pedestal",
      "tag": "",
      "shape": "square",
      "material": "reinforced concrete",
      "count": 10,
      "note": "Small square marks along skewed edge of deck-level plan, likely bearing or drainage inlet locations"
    },
    {
      "name": "Drainage inlet/scupper",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 5,
      "note": "Small hatched symbols spaced along the bottom edge of deck plan (5000 typ. spacing)"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline of expansion joint noted near A1"
    }
  ],
  "measurements": [
    {
      "label": "Overall span length (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "deck span between P1 and A1"
    },
    {
      "label": "Overall span length (skew)",
      "value": "46189",
      "unit": "",
      "appliesTo": "deck span between P1 and A1, skewed measurement"
    },
    {
      "label": "Offset from crash barrier (square)",
      "value": "1170",
      "unit": "",
      "appliesTo": "crash barrier setback, square"
    },
    {
      "label": "Offset from crash barrier (skew)",
      "value": "1350",
      "unit": "",
      "appliesTo": "crash barrier setback, skew"
    },
    {
      "label": "Girder spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "deck level girders, repeated 4 times"
    },
    {
      "label": "Total width (deck level)",
      "value": "16550",
      "unit": "",
      "appliesTo": "deck level plan overall width"
    },
    {
      "label": "Edge offset (deck level)",
      "value": "1275",
      "unit": "",
      "appliesTo": "deck level plan edge dimension, top and bottom"
    },
    {
      "label": "Girder spacing (foundation level)",
      "value": "3750",
      "unit": "",
      "appliesTo": "foundation level plan, pile/girder spacing, repeated 4 times"
    },
    {
      "label": "Total width (foundation level)",
      "value": "16550",
      "unit": "",
      "appliesTo": "foundation level plan overall width"
    },
    {
      "label": "Edge offset (foundation level)",
      "value": "775",
      "unit": "",
      "appliesTo": "foundation level plan edge dimension, top and bottom"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "deck skew angle at P1"
    },
    {
      "label": "Typical spacing of inlets/scuppers",
      "value": "5000",
      "unit": "",
      "appliesTo": "drainage inlet spacing along bottom edge of deck plan"
    }
  ],
  "notes": [
    "30° SKEW",
    "TYP.",
    "TO KHANDWA",
    "C OF EXP. JOINT",
    "INDEPENDENT",
    "ME... (text cut off, illegible)"
  ],
  "labels": [
    "P1",
    "A1",
    "CRASH BARRIER",
    "RCC CRASH BARRIER",
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "(SCALE 1:300)"
  ],
  "description": "This crop shows two half plans of a skewed bridge span between pier P1 and abutment A1: the left half depicts the deck level plan with crash barriers, girder lines, and drainage inlet locations along a 30° skew, while the right half shows the foundation level plan with circular piles arranged in rows beneath the deck. Key dimensions include overall span lengths (square and skew), girder/pile spacing, and edge offsets, all drawn at scale 1:300. The drawing documents part of the deck and foundation layout for a skewed bridge structure, including labels for direction ('TO KHANDWA') and expansion joint location."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "tapered/trapezoidal stem with sloped backfill face",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Main abutment body shown with backfill, bearing shelf, and pile foundation below."
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "not stated (POT-PTFE type)",
      "count": 1,
      "note": "Labelled POT-PTFE BEARING (TYP.), located at abutment top near centerline of bearing."
    },
    {
      "name": "Seismic stopper",
      "tag": "",
      "shape": "rectangular block",
      "material": "reinforced concrete (RCC)",
      "count": 1,
      "note": "Labelled RCC SEISMIC STOPPER, adjacent to bearing."
    },
    {
      "name": "Bored cast-in-situ pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 4,
      "note": "Shown in plan-like footprint below abutment, spaced at 3600mm centers, 1200 dia (per partial label)."
    },
    {
      "name": "Stone pitching / slope protection",
      "tag": "",
      "shape": "irregular/graded stone fill",
      "material": "stone",
      "count": 1,
      "note": "Labelled STONE PITCHING on embankment slope."
    },
    {
      "name": "Filter media layer",
      "tag": "",
      "shape": "layer",
      "material": "granular fill",
      "count": 1,
      "note": "Labelled 600 THK. FILTER (text cut off), behind abutment stem."
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "narrow gap",
      "material": "not stated",
      "count": 1,
      "note": "Located at deck top, labelled 80(SQ) 92(SK) EXP.GAP, aligned with ℄ OF EXP. JOINT."
    },
    {
      "name": "Deck/girder end (partial)",
      "tag": "",
      "shape": "rectangular",
      "material": "not stated",
      "count": 1,
      "note": "Only a small portion of the superstructure end near the bearing is visible."
    },
    {
      "name": "Approach embankment fill",
      "tag": "",
      "shape": "sloped/tapered wedge",
      "material": "earth/granular fill",
      "count": 1,
      "note": "Fill behind and below abutment, shown with hatching pattern."
    }
  ],
  "measurements": [
    {
      "label": "1070",
      "value": "1070",
      "unit": "mm",
      "appliesTo": "square dimension near ℄ OF BRG"
    },
    {
      "label": "1236",
      "value": "1236",
      "unit": "mm",
      "appliesTo": "skew dimension near ℄ OF BRG"
    },
    {
      "label": "80",
      "value": "80",
      "unit": "mm",
      "appliesTo": "expansion gap (square)"
    },
    {
      "label": "92",
      "value": "92",
      "unit": "mm",
      "appliesTo": "expansion gap (skew)"
    },
    {
      "label": "3500",
      "value": "3500",
      "unit": "mm",
      "appliesTo": "deck/abutment top dimension (SQ)"
    },
    {
      "label": "230",
      "value": "230",
      "unit": "mm",
      "appliesTo": "deck slab thickness at top of abutment"
    },
    {
      "label": "2650",
      "value": "2650",
      "unit": "mm",
      "appliesTo": "vertical dimension of abutment upper section"
    },
    {
      "label": "1500",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "horizontal dimension of abutment backfill/seat"
    },
    {
      "label": "2850",
      "value": "2850",
      "unit": "mm",
      "appliesTo": "horizontal dimension adjacent to 1500 measurement"
    },
    {
      "label": "1500",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "lower horizontal dimension near pile cap area"
    },
    {
      "label": "750",
      "value": "750",
      "unit": "mm",
      "appliesTo": "end spacing of pile group (left side)"
    },
    {
      "label": "3600",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "pile spacing (three instances)"
    },
    {
      "label": "750",
      "value": "750",
      "unit": "mm",
      "appliesTo": "end spacing of pile group (right side)"
    },
    {
      "label": "12300",
      "value": "12300",
      "unit": "mm",
      "appliesTo": "overall pile group width"
    },
    {
      "label": "600 THK",
      "value": "600",
      "unit": "mm",
      "appliesTo": "filter layer thickness (label partially cut off)"
    },
    {
      "label": "1200 DIA",
      "value": "1200",
      "unit": "mm",
      "appliesTo": "bored cast-in-situ pile diameter (label partially cut off)"
    },
    {
      "label": "SCALE",
      "value": "1:150",
      "unit": "",
      "appliesTo": "SECTION A-A"
    }
  ],
  "notes": [
    "℄ OF EXP. JOINT",
    "℄ OF BRG.",
    "POT-PTFE BEARING (TYP.)",
    "RCC SEISMIC STOPPER",
    "STONE PITCHING",
    "INDEPENDENT RE... (text cut off)",
    "600 THK. FILTER ... (text cut off)",
    "1200 DIA BORED ... CAST-IN-SITU PILE ... (text cut off)"
  ],
  "labels": [
    "A2",
    "SECTION A-A",
    "(SCALE 1:150)"
  ],
  "description": "This crop is a cross section (Section A-A, scale 1:150) through abutment A2 of a bridge, showing the abutment stem, backfill, POT-PTFE bearing with RCC seismic stopper at the bearing shelf, and a row of four bored cast-in-situ piles beneath the abutment spaced at 3600mm centers with 750mm end offsets (overall 12300mm). Slope protection via stone pitching and a filter layer is shown on the embankment face, with partial superstructure and expansion joint details visible at the top of the section; some right-side callout text is cut off at the crop edge."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Wall type abutment at left end, with expansion joint and bearing"
    },
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Wall type abutment at right end, mirrors A1"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "circular column",
      "material": "reinforced concrete",
      "count": 1,
      "note": "RCC column pier at centre, labelled RCC COLUMN PIER (TYP.)"
    },
    {
      "name": "Bearing",
      "tag": "FR",
      "shape": "rectangular",
      "material": "PTFE/elastomeric pot bearing",
      "count": 3,
      "note": "POT-PTFE BEARING (TYP.), fixed/free type marked FR, located at A1, P1(one side) and A2"
    },
    {
      "name": "Bearing",
      "tag": "FX",
      "shape": "rectangular",
      "material": "PTFE pot bearing",
      "count": 1,
      "note": "POT-PTFE BEARING (TYP.), fixed type marked FX at pier P1"
    },
    {
      "name": "Girder",
      "tag": "",
      "shape": "I-girder/precast",
      "material": "precast concrete",
      "count": null,
      "note": "PRECAST PSC GIRDER (TYP.), multiple spans, exact count not enumerable from crop"
    },
    {
      "name": "Crash Barrier",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "RCC CRASH BARRIER along both spans"
    },
    {
      "name": "Approach Slab",
      "tag": "",
      "shape": "rectangular slab",
      "material": "concrete",
      "count": 2,
      "note": "300 THK. APPROACH SLAB at both ends"
    },
    {
      "name": "Pavement Layer",
      "tag": "",
      "shape": "layer",
      "material": "PCC",
      "count": 2,
      "note": "150 THK. PCC LEVELING COURSE beneath approach slabs"
    },
    {
      "name": "Retaining Wall",
      "tag": "",
      "shape": "rectangular/independent",
      "material": "concrete",
      "count": 2,
      "note": "INDEPENDENT RETAINING WALL shown both sides with stone pitching and filter media"
    },
    {
      "name": "Stone Pitching",
      "tag": "",
      "shape": "sloped surface treatment",
      "material": "stone",
      "count": 2,
      "note": "STONE PITCHING noted at both embankments"
    },
    {
      "name": "Filter Media",
      "tag": "",
      "shape": "layer",
      "material": "granular fill",
      "count": 2,
      "note": "600 THK. FILTER MEDIA beneath stone pitching"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete, cast in situ",
      "count": null,
      "note": "1200Ø RCC CAST IN SITU PILE (TYP.) shown below pier P1 in dashed foundation plan; number of piles not clearly countable"
    },
    {
      "name": "Launching Apron",
      "tag": "",
      "shape": "sloped/stepped",
      "material": "stone/concrete",
      "count": 1,
      "note": "Shown below abutment A1 slope, labelled LAUNCHING APRON"
    },
    {
      "name": "Deck Continuity",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": 1,
      "note": "Labelled DECK CONTINUITY at pier P1 location"
    },
    {
      "name": "Expansion Joint",
      "tag": "",
      "shape": "linear gap",
      "material": "",
      "count": 2,
      "note": "Marked at both abutments, EXP. GAP dimensions given"
    }
  ],
  "measurements": [
    {
      "label": "Span length (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "Span A1-P1"
    },
    {
      "label": "Span length (skew)",
      "value": "46188",
      "unit": "",
      "appliesTo": "Span A1-P1"
    },
    {
      "label": "Span length (square)",
      "value": "46000",
      "unit": "",
      "appliesTo": "Span P1-A2 (SK label shown twice, 46000(SQ) not explicit, only SK shown)"
    },
    {
      "label": "Span length (skew)",
      "value": "46188",
      "unit": "",
      "appliesTo": "Span P1-A2"
    },
    {
      "label": "Expansion gap (square)",
      "value": "80",
      "unit": "",
      "appliesTo": "A1 exp. joint"
    },
    {
      "label": "Expansion gap (skew)",
      "value": "92",
      "unit": "",
      "appliesTo": "A1 exp. joint"
    },
    {
      "label": "Expansion gap (square)",
      "value": "80",
      "unit": "",
      "appliesTo": "A2 exp. joint"
    },
    {
      "label": "Expansion gap (skew)",
      "value": "92",
      "unit": "",
      "appliesTo": "A2 exp. joint"
    },
    {
      "label": "Distance from exp joint to bearing centre (square)",
      "value": "1070",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "Distance from exp joint to bearing centre (skew)",
      "value": "1236",
      "unit": "",
      "appliesTo": "A1"
    },
    {
      "label": "Distance from exp joint to bearing centre (square)",
      "value": "1070",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "Distance from exp joint to bearing centre (skew)",
      "value": "1236",
      "unit": "",
      "appliesTo": "A2"
    },
    {
      "label": "Distance between bearings (square)",
      "value": "37761",
      "unit": "",
      "appliesTo": "Span A1-P1"
    },
    {
      "label": "Distance between bearings (skew)",
      "value": "43602",
      "unit": "",
      "appliesTo": "Span A1-P1"
    },
    {
      "label": "Distance between bearings (square)",
      "value": "37761",
      "unit": "",
      "appliesTo": "Span P1-A2"
    },
    {
      "label": "Distance between bearings (skew)",
      "value": "43602",
      "unit": "",
      "appliesTo": "Span P1-A2"
    },
    {
      "label": "Bearing offset at pier (square)",
      "value": "1170",
      "unit": "",
      "appliesTo": "P1 left"
    },
    {
      "label": "Bearing offset at pier (skew)",
      "value": "1350",
      "unit": "",
      "appliesTo": "P1 left"
    },
    {
      "label": "Bearing offset at pier (square)",
      "value": "1170",
      "unit": "",
      "appliesTo": "P1 right"
    },
    {
      "label": "Bearing offset at pier (skew)",
      "value": "1350",
      "unit": "",
      "appliesTo": "P1 right"
    },
    {
      "label": "Pier cap width (skew)",
      "value": "1500",
      "unit": "",
      "appliesTo": "P1 pier cap"
    },
    {
      "label": "Approach slab thickness",
      "value": "300",
      "unit": "THK.",
      "appliesTo": "Approach slab"
    },
    {
      "label": "PCC leveling course thickness",
      "value": "150",
      "unit": "THK.",
      "appliesTo": "PCC leveling course"
    },
    {
      "label": "Filter media thickness",
      "value": "600",
      "unit": "THK.",
      "appliesTo": "Retaining wall filter media"
    },
    {
      "label": "Minimum clearance",
      "value": "1200",
      "unit": "(min)",
      "appliesTo": "HFL clearance below girder"
    },
    {
      "label": "High Flood Level",
      "value": "HFL=",
      "unit": "",
      "appliesTo": "River/waterway (value not printed)"
    },
    {
      "label": "Low Water Level",
      "value": "506.000",
      "unit": "m",
      "appliesTo": "LWL"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "mm (Ø)",
      "appliesTo": "RCC cast in situ pile"
    },
    {
      "label": "Pile cap/foundation dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "P1 foundation"
    },
    {
      "label": "Pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "P1 foundation"
    },
    {
      "label": "Foundation width total",
      "value": "5100",
      "unit": "",
      "appliesTo": "P1 foundation"
    },
    {
      "label": "Embankment/retaining wall dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A1 retaining wall footing"
    },
    {
      "label": "Embankment dimension",
      "value": "3600",
      "unit": "",
      "appliesTo": "A1 retaining wall (repeated 3 times)"
    },
    {
      "label": "Embankment total width",
      "value": "12300",
      "unit": "",
      "appliesTo": "A1 retaining wall"
    },
    {
      "label": "Embankment/retaining wall dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "A2 retaining wall footing"
    },
    {
      "label": "Embankment dimension",
      "value": "3600",
      "unit": "",
      "appliesTo": "A2 retaining wall (repeated 3 times)"
    },
    {
      "label": "Embankment total width",
      "value": "12300",
      "unit": "",
      "appliesTo": "A2 retaining wall"
    },
    {
      "label": "Chainage LHS point 1",
      "value": "64+360.197",
      "unit": "km",
      "appliesTo": "Table LHS chainage"
    },
    {
      "label": "Chainage RHS point 1",
      "value": "64+371.487",
      "unit": "km",
      "appliesTo": "Table RHS chainage"
    },
    {
      "label": "Chainage LHS point 2",
      "value": "64+406.385",
      "unit": "km",
      "appliesTo": "Table LHS chainage"
    },
    {
      "label": "Chainage RHS point 2",
      "value": "64+417.675",
      "unit": "km",
      "appliesTo": "Table RHS chainage"
    },
    {
      "label": "Chainage LHS point 3",
      "value": "64+452.573",
      "unit": "km",
      "appliesTo": "Table LHS chainage"
    },
    {
      "label": "Chainage RHS point 3",
      "value": "64+463.814",
      "unit": "km",
      "appliesTo": "Table RHS chainage"
    },
    {
      "label": "FRL LHS point 1",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "Table FRL LHS"
    },
    {
      "label": "FRL RHS point 1",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "Table FRL RHS"
    },
    {
      "label": "FRL LHS point 2",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "Table FRL LHS"
    },
    {
      "label": "FRL RHS point 2",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "Table FRL RHS"
    },
    {
      "label": "FRL LHS point 3",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "Table FRL LHS"
    },
    {
      "label": "FRL RHS point 3",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "Table FRL RHS"
    },
    {
      "label": "Ground level LHS point 1",
      "value": "509.560",
      "unit": "m",
      "appliesTo": "Table ground level LHS"
    },
    {
      "label": "Ground level LHS point 2",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "Table ground level LHS"
    },
    {
      "label": "Ground level LHS point 3",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "Table ground level LHS"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE ... OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT FOLLOWED.",
    "3. THIS DRAWING SHALL ALIGNMENT DRAWINGS",
    "4. THE BRIDGE HAS PER... (text cut off)"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "A1",
    "A2",
    "P1",
    "Ç OF EXP. JOINT",
    "Ç OF BRG.",
    "RCC CRASH BARRIER",
    "PRECAST PSC GIRDER (TYP.)",
    "WALL TYPE ABUTMENT",
    "POT-PTFE BEARING (TYP.)",
    "RCC COLUMN PIER (TYP.)",
    "DECK CONTINUITY",
    "LAUNCHING APRON",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "300 THK. APPROACH SLAB",
    "150 THK. PCC LEVELING COURSE",
    "600 THK. FILTER MEDIA",
    "1200Ø RCC CAST IN SITU PILE (TYP.)",
    "LWL=506.000m",
    "HFL=",
    "NOTES:",
    "CHAINAGE IN (km.)",
    "FRL. (m)",
    "MAIN CARRIAGEWAY",
    "GROUND LEVEL(m)",
    "LHS",
    "RHS"
  ],
  "description": "This crop shows a full bridge elevation between two abutments (A1, A2) and a central pier (P1), depicting two spans of precast PSC girders on POT-PTFE bearings, RCC crash barriers, wall-type abutments, and a circular RCC column pier founded on 1200mm diameter cast-in-situ piles. Below the elevation is a data table listing chainage, formation road level, and ground level values at three points along LHS and RHS of the carriageway, with a partially visible general notes column at the right edge."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at left end, with expansion joint centerline and POT-PTFE bearings"
    },
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at right end, labeled 'WALL TYPE ABUTMENT', with expansion joint"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "column, circular/rectangular cap",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Labeled 'RCC COLUMN PIER (TYP.)', supports deck continuity"
    },
    {
      "name": "Girder",
      "tag": "",
      "shape": "I-girder/precast",
      "material": "precast concrete",
      "count": null,
      "note": "Labeled 'PRECAST PSC GIRDER (TYP.)'; multiple girder segments shown along both spans"
    },
    {
      "name": "Bearing",
      "tag": "FR / FX",
      "shape": "pot bearing",
      "material": "elastomeric/PTFE-steel",
      "count": 6,
      "note": "Labeled 'POT-PTFE BEARING (TYP.)'; FR (free) at abutments and one side of pier, FX (fixed) at pier"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Labeled '1200Ø RCC CAST IN SITU PILE (TYP.)', shown under both abutments and pier in schematic cross-sections"
    },
    {
      "name": "Pile cap / foundation",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 3,
      "note": "Shown in plan-like sketches beneath A1, P1, A2 with pile spacing dimensions"
    },
    {
      "name": "Crash barrier",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Labeled 'RCC CRASH BARRIER' on both spans"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "300 THK, one at each abutment"
    },
    {
      "name": "PCC leveling course",
      "tag": "",
      "shape": "layer",
      "material": "plain cement concrete",
      "count": 2,
      "note": "150 THK, beneath approach slabs at both ends"
    },
    {
      "name": "Retaining wall",
      "tag": "",
      "shape": "sloped/independent",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Labeled 'INDEPENDENT RETAINING WALL' at both abutments"
    },
    {
      "name": "Stone pitching",
      "tag": "",
      "shape": "sloped surface treatment",
      "material": "stone",
      "count": 2,
      "note": "With 600 THK filter media beneath, at both abutment slopes"
    },
    {
      "name": "Launching apron",
      "tag": "",
      "shape": "sloped",
      "material": "unspecified",
      "count": 1,
      "note": "Labeled near A1 embankment slope"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear gap",
      "material": "",
      "count": 2,
      "note": "At centerline of A1 and A2, with EXP.GAP dimensions 80(SQ.)/92(SK)"
    },
    {
      "name": "Girder cross-section (typical)",
      "tag": "",
      "shape": "I-section/tapered flange",
      "material": "precast concrete",
      "count": 1,
      "note": "Shown separately as 'SURPORT SECTION (SCALE 1:50)' / 'CROSS SECTION OF PI...' (cut off), with dimensions 1000, 800, 2650"
    }
  ],
  "measurements": [
    {
      "label": "Span A1 to P1 (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "A1-P1 span"
    },
    {
      "label": "Span A1 to P1 (skew)",
      "value": "46188",
      "unit": "",
      "appliesTo": "A1-P1 span"
    },
    {
      "label": "Span P1 to A2 (skew)",
      "value": "46000",
      "unit": "",
      "appliesTo": "P1-A2 span"
    },
    {
      "label": "Span P1 to A2 (skew, alt)",
      "value": "46188",
      "unit": "",
      "appliesTo": "P1-A2 span"
    },
    {
      "label": "Expansion gap (square)",
      "value": "80",
      "unit": "",
      "appliesTo": "A1/A2 exp. joint"
    },
    {
      "label": "Expansion gap (skew)",
      "value": "92",
      "unit": "",
      "appliesTo": "A1/A2 exp. joint"
    },
    {
      "label": "Distance (square)",
      "value": "37761",
      "unit": "",
      "appliesTo": "span between bearing centerlines"
    },
    {
      "label": "Distance (skew)",
      "value": "43602",
      "unit": "",
      "appliesTo": "span between bearing centerlines"
    },
    {
      "label": "Offset (square)",
      "value": "1070",
      "unit": "",
      "appliesTo": "A1/A2 area"
    },
    {
      "label": "Offset (skew)",
      "value": "1236",
      "unit": "",
      "appliesTo": "A1/A2 area"
    },
    {
      "label": "Offset (square)",
      "value": "1170",
      "unit": "",
      "appliesTo": "P1 area"
    },
    {
      "label": "Offset (skew)",
      "value": "1350",
      "unit": "",
      "appliesTo": "P1 area"
    },
    {
      "label": "Approach slab thickness",
      "value": "300",
      "unit": "",
      "appliesTo": "approach slab"
    },
    {
      "label": "PCC leveling course thickness",
      "value": "150",
      "unit": "",
      "appliesTo": "PCC leveling course"
    },
    {
      "label": "Filter media thickness",
      "value": "600",
      "unit": "",
      "appliesTo": "independent retaining wall"
    },
    {
      "label": "HFL clearance minimum",
      "value": "1200",
      "unit": "",
      "appliesTo": "pier clearance to HFL"
    },
    {
      "label": "LWL",
      "value": "506.000",
      "unit": "m",
      "appliesTo": "pier P1 area"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "mm (Ø)",
      "appliesTo": "pile"
    },
    {
      "label": "Pile cap dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "abutment/pier pile group"
    },
    {
      "label": "Pile cap dimension",
      "value": "3600",
      "unit": "",
      "appliesTo": "abutment/pier pile spacing"
    },
    {
      "label": "Pile cap total width",
      "value": "12300",
      "unit": "",
      "appliesTo": "abutment pile group A1/A2"
    },
    {
      "label": "Pier pile cap total",
      "value": "5100",
      "unit": "",
      "appliesTo": "pier P1 pile group"
    },
    {
      "label": "Pier cap width",
      "value": "1500",
      "unit": "(SK)",
      "appliesTo": "P1 pier cap"
    },
    {
      "label": "Cross section flange width",
      "value": "1000",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Cross section depth",
      "value": "2650",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Cross section bottom width",
      "value": "800",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Cross section top flange thickness",
      "value": "150",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Cross section web thickness",
      "value": "29",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Chainage LHS Point1",
      "value": "64+360.197",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage RHS Point1",
      "value": "64+371.487",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage LHS Point2",
      "value": "64+406.385",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage RHS Point2",
      "value": "64+417.675",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage LHS Point3",
      "value": "64+452.573",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage RHS Point3",
      "value": "64+463.814",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "FRL LHS Point1",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL RHS Point1",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL LHS Point2",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL RHS Point2",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL LHS Point3",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL RHS Point3",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level LHS Point1",
      "value": "509.560",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level RHS Point1",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level LHS Point2",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level RHS Point2",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level LHS Point3",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level RHS Point3",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "table"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN ... OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIMEN... FOLLOWED.",
    "3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RESP... ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLAS... CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R -... 70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED",
    "5. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONEN... FOLLOWS:-"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "ELEVATION (SCALE 1:300)",
    "SURPORT SECTION (SCALE 1:50)",
    "CROSS SECTION OF PI...",
    "NOTES:",
    "A1",
    "P1",
    "A2",
    "FR",
    "FX",
    "£ OF EXP. JOINT",
    "£ OF BRG.",
    "DECK CONTINUITY",
    "LAUNCHING APRON",
    "STONE PITCHING",
    "INDEPENTENT RETAINING WALL",
    "INDEPENDENT RETAINING WALL",
    "300 THK. APPROACH SLAB",
    "150 THK. PCC LEVELING COURSE",
    "600 THK. FILTER MEDIA",
    "RCC CRASH BARRIER",
    "RCC COLUMN PIER (TYP.)",
    "1200Ø RCC CAST IN SITU PILE (TYP.)",
    "POT-PTFE BEARING (TYP.)",
    "PRECAST PSC GIRDER (TYP.)",
    "WALL TYPE ABUTMENT",
    "£ OF GIRDER"
  ],
  "description": "This crop shows the full elevation of a two-span bridge over a valley/river, with abutments A1 and A2 at either end and a single pier P1 at midspan, connected by precast PSC girders on POT-PTFE bearings (fixed at pier, free elsewhere). Below the elevation is a data table giving chainage, formation road level, and ground level at three points along the LHS and RHS of the carriageway, and to the right a partially visible general notes column (notes 1-5) covering dimension units, alignment reference, live load class (70R + traffic), and concrete grades, along with a separate typical girder support cross-section detail at the far right."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at left end, near TO DEWAS side"
    },
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at right end, near TO KHANDWA side"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "circular column",
      "material": "reinforced concrete",
      "count": 1,
      "note": "RCC column pier"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "1200mm dia RCC cast-in-situ pile (typ.), shown under P1 pile cap"
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 3,
      "note": "One under each abutment (A1, A2) and under pier P1"
    },
    {
      "name": "Bearing",
      "tag": "FR",
      "shape": "pot-PTFE",
      "material": "elastomeric/steel",
      "count": 4,
      "note": "Free/guided bearings, typical, at abutments and pier"
    },
    {
      "name": "Bearing",
      "tag": "FX",
      "shape": "pot-PTFE",
      "material": "elastomeric/steel",
      "count": 1,
      "note": "Fixed bearing at pier P1"
    },
    {
      "name": "Girder",
      "tag": "",
      "shape": "I-girder",
      "material": "precast concrete",
      "count": null,
      "note": "Precast PSC girder (typ.), multiple spans shown"
    },
    {
      "name": "Crash barrier",
      "tag": "",
      "shape": "rectangular profile",
      "material": "reinforced concrete",
      "count": 2,
      "note": "RCC crash barrier along both spans"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "300 thk. approach slab at both ends"
    },
    {
      "name": "PCC leveling course",
      "tag": "",
      "shape": "layer",
      "material": "plain cement concrete",
      "count": 2,
      "note": "150 thk. PCC leveling course beneath approach slabs"
    },
    {
      "name": "Deck continuity",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Deck continuity joint over pier P1"
    },
    {
      "name": "Retaining wall",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Independent retaining wall at both abutments"
    },
    {
      "name": "Stone pitching",
      "tag": "",
      "shape": "sloped surface",
      "material": "stone",
      "count": 2,
      "note": "Stone pitching with 600 thk. filter media at both approach slopes"
    },
    {
      "name": "Launching apron",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Shown near abutment A1 slope"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "At centerline of exp. joint near A1 and A2, gap 80(SQ) 92(SK)"
    },
    {
      "name": "Girder cross section",
      "tag": "",
      "shape": "tapered/I-section",
      "material": "precast concrete",
      "count": 1,
      "note": "Support section detail shown at right, scale 1:50"
    }
  ],
  "measurements": [
    {
      "label": "Span A1 to P1",
      "value": "40000(SQ) 46188(SK)",
      "unit": "mm",
      "appliesTo": "span between A1 and P1"
    },
    {
      "label": "Span P1 to A2",
      "value": "46000(SK) 46188(SK)",
      "unit": "mm",
      "appliesTo": "span between P1 and A2"
    },
    {
      "label": "Bearing to bearing distance",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": "left span, between bearing centerlines"
    },
    {
      "label": "Bearing to bearing distance",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": "right span, between bearing centerlines"
    },
    {
      "label": "Expansion gap",
      "value": "80(SQ) 92(SK)",
      "unit": "mm",
      "appliesTo": "expansion joint at A1"
    },
    {
      "label": "Expansion gap",
      "value": "80(SQ) 92(SK)",
      "unit": "mm",
      "appliesTo": "expansion joint at A2"
    },
    {
      "label": "Bearing offset",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "bearing near A1"
    },
    {
      "label": "Bearing offset",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "bearing near P1 (left side)"
    },
    {
      "label": "Bearing offset",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "bearing near P1 (right side)"
    },
    {
      "label": "Bearing offset",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "bearing near A2"
    },
    {
      "label": "Pier cap width",
      "value": "1500(SK)",
      "unit": "mm",
      "appliesTo": "P1 pier cap"
    },
    {
      "label": "HFL clearance",
      "value": "1200(min)",
      "unit": "mm",
      "appliesTo": "HFL level marker"
    },
    {
      "label": "LWL elevation",
      "value": "506.000",
      "unit": "m",
      "appliesTo": "Low Water Level"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "mm",
      "appliesTo": "RCC cast in situ pile at P1"
    },
    {
      "label": "Pile cap dimension (A1/A2)",
      "value": "750, 3600, 3600, 3600, 750",
      "unit": "mm",
      "appliesTo": "pile cap width breakdown at abutments"
    },
    {
      "label": "Pile cap total width (A1/A2)",
      "value": "12300",
      "unit": "mm",
      "appliesTo": "pile cap at abutments"
    },
    {
      "label": "Pile cap dimension (P1)",
      "value": "750, 3600, 750",
      "unit": "mm",
      "appliesTo": "pile cap width breakdown at pier"
    },
    {
      "label": "Pile cap total width (P1)",
      "value": "5100",
      "unit": "mm",
      "appliesTo": "pile cap at pier P1"
    },
    {
      "label": "Approach slab thickness",
      "value": "300",
      "unit": "mm",
      "appliesTo": "approach slab"
    },
    {
      "label": "PCC leveling course thickness",
      "value": "150",
      "unit": "mm",
      "appliesTo": "PCC leveling course"
    },
    {
      "label": "Filter media thickness",
      "value": "600",
      "unit": "mm",
      "appliesTo": "stone pitching filter media"
    },
    {
      "label": "Chainage LHS (A1)",
      "value": "64+360.197",
      "unit": "km",
      "appliesTo": "A1 LHS chainage"
    },
    {
      "label": "Chainage RHS (A1)",
      "value": "64+371.487",
      "unit": "km",
      "appliesTo": "A1 RHS chainage"
    },
    {
      "label": "Chainage LHS (P1)",
      "value": "64+406.385",
      "unit": "km",
      "appliesTo": "P1 LHS chainage"
    },
    {
      "label": "Chainage RHS (P1)",
      "value": "64+417.675",
      "unit": "km",
      "appliesTo": "P1 RHS chainage"
    },
    {
      "label": "Chainage LHS (A2)",
      "value": "64+452.573",
      "unit": "km",
      "appliesTo": "A2 LHS chainage"
    },
    {
      "label": "Chainage RHS (A2)",
      "value": "64+463.814",
      "unit": "km",
      "appliesTo": "A2 RHS chainage"
    },
    {
      "label": "FRL LHS (A1)",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "A1 main carriageway LHS"
    },
    {
      "label": "FRL RHS (A1)",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "A1 main carriageway RHS"
    },
    {
      "label": "FRL LHS (P1)",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "P1 main carriageway LHS"
    },
    {
      "label": "FRL RHS (P1)",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "P1 main carriageway RHS"
    },
    {
      "label": "FRL LHS (A2)",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "A2 main carriageway LHS"
    },
    {
      "label": "FRL RHS (A2)",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "A2 main carriageway RHS"
    },
    {
      "label": "Ground level LHS (A1)",
      "value": "509.560",
      "unit": "m",
      "appliesTo": "A1 LHS ground level"
    },
    {
      "label": "Ground level RHS (A1)",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "A1 RHS ground level"
    },
    {
      "label": "Ground level LHS (P1)",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "P1 LHS ground level"
    },
    {
      "label": "Ground level RHS (P1)",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "P1 RHS ground level"
    },
    {
      "label": "Ground level LHS (A2)",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "A2 LHS ground level"
    },
    {
      "label": "Ground level RHS (A2)",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "A2 RHS ground level"
    },
    {
      "label": "Support section width",
      "value": "800",
      "unit": "mm",
      "appliesTo": "girder cross section base"
    },
    {
      "label": "Support section top width",
      "value": "1000",
      "unit": "mm",
      "appliesTo": "girder cross section top"
    },
    {
      "label": "Support section height",
      "value": "2650",
      "unit": "mm",
      "appliesTo": "girder cross section overall height"
    },
    {
      "label": "Support section top flange thickness",
      "value": "150",
      "unit": "mm",
      "appliesTo": "girder cross section"
    },
    {
      "label": "Support section web thickness",
      "value": "29",
      "unit": "mm",
      "appliesTo": "girder cross section web"
    },
    {
      "label": "Slope ratio",
      "value": "2:1",
      "unit": "",
      "appliesTo": "approach embankment slope near A1 and A2"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN...OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIM...FOLLOWED.",
    "3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RES...ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLA...CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R...70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED.",
    "5. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONE...FOLLOWS:-"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "É OF EXP. JOINT",
    "É OF BRG.",
    "RCC CRASH BARRIER",
    "DECK CONTINUITY",
    "POT-PTFE BEARING (TYP.)",
    "RCC COLUMN PIER (TYP.)",
    "PRECAST PSC GIRDER (TYP.)",
    "WALL TYPE ABUTMENT",
    "LAUNCHING APRON",
    "1200∅ RCC CAST IN SITU PILE (TYP.)",
    "INDEPENDENT RETAINING WALL",
    "STONE PITCHING",
    "600 THK. FILTER MEDIA",
    "300 THK. APPROACH SLAB",
    "150 THK. PCC LEVELING COURSE",
    "HFL=",
    "LWL=506.000m",
    "ELEVATION (SCALE 1:300)",
    "SURPORT SECTION (SCALE 1:50)",
    "CROSS SECTION OF ...",
    "É OF GIRDER",
    "CHAINAGE IN (km.)",
    "FRL. (m)",
    "MAIN CARRIAGEWAY",
    "GROUND LEVEL (m)",
    "LHS",
    "RHS",
    "NOTES:"
  ],
  "description": "This crop shows the longitudinal elevation of a two-span bridge (scale 1:300) between abutments A1 and A2 with a central pier P1, including span dimensions, bearing types (FR/FX pot-PTFE bearings), precast PSC girders, RCC crash barriers, approach slabs, retaining walls, stone pitching, and pile/pile cap details. Below the elevation is a chainage/level data table for LHS and RHS at each support, and to the right is a girder support cross-section detail (scale 1:50) with a partial general notes block."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Marked with expansion joint centerline, pot-PTFE bearings (FR)"
    },
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Marked with expansion joint centerline, pot-PTFE bearings (FR), labeled 'WALL TYPE ABUTMENT'"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "column, circular (implied by pile group)",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Labeled 'RCC COLUMN PIER (TYP.)'"
    },
    {
      "name": "Pot-PTFE Bearing",
      "tag": "FR",
      "shape": "rectangular block",
      "material": "elastomeric/PTFE",
      "count": 3,
      "note": "Located at A1, A2 and one side of P1; labeled 'POT-PTFE BEARING (TYP.)'"
    },
    {
      "name": "Pot-PTFE Bearing",
      "tag": "FX",
      "shape": "rectangular block",
      "material": "elastomeric/PTFE",
      "count": 1,
      "note": "Fixed bearing at P1"
    },
    {
      "name": "PSC Girder",
      "tag": "",
      "shape": "I-girder, precast",
      "material": "precast concrete",
      "count": null,
      "note": "Labeled 'PRECAST PSC GIRDER (TYP.)', multiple girders visible per span, exact count not clearly countable"
    },
    {
      "name": "RCC Crash Barrier",
      "tag": "",
      "shape": "rectangular/parapet",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One on each span, along deck edge"
    },
    {
      "name": "Approach Slab",
      "tag": "",
      "shape": "rectangular slab",
      "material": "reinforced concrete",
      "count": 2,
      "note": "300 THK, at each abutment approach"
    },
    {
      "name": "PCC Leveling Course",
      "tag": "",
      "shape": "layer",
      "material": "plain cement concrete",
      "count": 2,
      "note": "150 THK, beneath approach slab"
    },
    {
      "name": "Independent Retaining Wall",
      "tag": "",
      "shape": "trapezoidal/battered wall",
      "material": "unspecified (likely concrete)",
      "count": 2,
      "note": "At each end near abutments"
    },
    {
      "name": "Stone Pitching",
      "tag": "",
      "shape": "sloped surface treatment",
      "material": "stone",
      "count": 2,
      "note": "Slope protection near abutments"
    },
    {
      "name": "Filter Media",
      "tag": "",
      "shape": "layer",
      "material": "granular filter media",
      "count": 2,
      "note": "600 THK, behind retaining wall"
    },
    {
      "name": "Launching Apron",
      "tag": "",
      "shape": "stepped/sloped apron",
      "material": "unspecified",
      "count": 1,
      "note": "Shown at left span near A1"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 3,
      "note": "1200mm dia RCC cast-in-situ piles shown in plan-like inset below P1; group of 3 visible with 3600mm spacing"
    },
    {
      "name": "Deck Continuity Joint",
      "tag": "",
      "shape": "linear joint",
      "material": "",
      "count": 1,
      "note": "Labeled at top of deck near P1"
    },
    {
      "name": "Expansion Joint",
      "tag": "",
      "shape": "linear gap",
      "material": "",
      "count": 2,
      "note": "At A1 and A2, '80(SQ) 92(SK) EXP.GAP'"
    }
  ],
  "measurements": [
    {
      "label": "Span length (A1 to P1)",
      "value": "40000(SQ) 46188(SK)",
      "unit": "mm",
      "appliesTo": "Span A1-P1"
    },
    {
      "label": "Span length (P1 to A2)",
      "value": "46000(SK)",
      "unit": "mm",
      "appliesTo": "Span P1-A2"
    },
    {
      "label": "Bridge centerline distance A1 to P1",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": "A1-P1"
    },
    {
      "label": "Bridge centerline distance P1 to A2",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": "P1-A2"
    },
    {
      "label": "Expansion gap at A1/A2",
      "value": "80(SQ) 92(SK)",
      "unit": "mm",
      "appliesTo": "A1, A2 expansion joints"
    },
    {
      "label": "Distance from bearing centerline",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "A1 region"
    },
    {
      "label": "Distance from bearing centerline",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "A2 region"
    },
    {
      "label": "Distance at P1 bearing (left)",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "P1 bearing"
    },
    {
      "label": "Distance at P1 bearing (right)",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "P1 bearing"
    },
    {
      "label": "Pier cap width",
      "value": "1500(SK)",
      "unit": "mm",
      "appliesTo": "P1"
    },
    {
      "label": "Approach slab thickness",
      "value": "300",
      "unit": "mm (THK.)",
      "appliesTo": "Approach slab"
    },
    {
      "label": "PCC leveling course thickness",
      "value": "150",
      "unit": "mm (THK.)",
      "appliesTo": "PCC leveling course"
    },
    {
      "label": "Filter media thickness",
      "value": "600",
      "unit": "mm (THK.)",
      "appliesTo": "Independent retaining wall backfill"
    },
    {
      "label": "Retaining wall base dimension",
      "value": "750",
      "unit": "mm",
      "appliesTo": "Independent retaining wall (left)"
    },
    {
      "label": "Retaining wall spacing",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "Independent retaining wall (left), repeated 3 times"
    },
    {
      "label": "Retaining wall total width",
      "value": "12300",
      "unit": "mm",
      "appliesTo": "Independent retaining wall (left)"
    },
    {
      "label": "Retaining wall base dimension",
      "value": "750",
      "unit": "mm",
      "appliesTo": "Independent retaining wall (right)"
    },
    {
      "label": "Retaining wall spacing",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "Independent retaining wall (right), repeated 3 times"
    },
    {
      "label": "Retaining wall total width",
      "value": "12300",
      "unit": "mm",
      "appliesTo": "Independent retaining wall (right)"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "mm (Ø)",
      "appliesTo": "RCC cast in situ pile at P1"
    },
    {
      "label": "Pile group edge distance",
      "value": "750",
      "unit": "mm",
      "appliesTo": "Pile group at P1"
    },
    {
      "label": "Pile spacing",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "Pile group at P1"
    },
    {
      "label": "Pile group total width",
      "value": "5100",
      "unit": "mm",
      "appliesTo": "Pile group at P1"
    },
    {
      "label": "HFL clearance",
      "value": "1200 (min)",
      "unit": "mm",
      "appliesTo": "HFL below deck"
    },
    {
      "label": "HFL elevation",
      "value": "HFL=",
      "unit": "m",
      "appliesTo": "High Flood Level, value not shown/illegible"
    },
    {
      "label": "LWL elevation",
      "value": "506.000",
      "unit": "m",
      "appliesTo": "Low Water Level"
    },
    {
      "label": "Chainage LHS at A1",
      "value": "64+360.197",
      "unit": "km",
      "appliesTo": "A1 LHS chainage"
    },
    {
      "label": "Chainage RHS at A1",
      "value": "64+371.487",
      "unit": "km",
      "appliesTo": "A1 RHS chainage"
    },
    {
      "label": "Chainage LHS at P1",
      "value": "64+406.385",
      "unit": "km",
      "appliesTo": "P1 LHS chainage"
    },
    {
      "label": "Chainage RHS at P1",
      "value": "64+417.675",
      "unit": "km",
      "appliesTo": "P1 RHS chainage"
    },
    {
      "label": "Chainage LHS at A2",
      "value": "64+452.573",
      "unit": "km",
      "appliesTo": "A2 LHS chainage"
    },
    {
      "label": "Chainage RHS at A2",
      "value": "64+463.814",
      "unit": "km",
      "appliesTo": "A2 RHS chainage"
    },
    {
      "label": "FRL LHS main carriageway at A1",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "A1 FRL LHS"
    },
    {
      "label": "FRL RHS main carriageway at A1",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "A1 FRL RHS"
    },
    {
      "label": "FRL LHS main carriageway at P1",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "P1 FRL LHS"
    },
    {
      "label": "FRL RHS main carriageway at P1",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "P1 FRL RHS"
    },
    {
      "label": "FRL LHS main carriageway at A2",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "A2 FRL LHS"
    },
    {
      "label": "FRL RHS main carriageway at A2",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "A2 FRL RHS"
    },
    {
      "label": "Ground level LHS (partial)",
      "value": "506.560 (partial, cut off)",
      "unit": "m",
      "appliesTo": "A1 ground level, table cut off at bottom"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE (text cut off, partial) OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE N... (text cut off) FOLLOWED.",
    "3. THIS DRAWING SHAL... (text cut off) ALIGNMENT DRAWING... (text cut off)"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "CENTRE OF EXP. JOINT",
    "CENTRE OF BRG.",
    "RCC CRASH BARRIER",
    "DECK CONTINUITY",
    "RCC COLUMN PIER (TYP.)",
    "PRECAST PSC GIRDER (TYP.)",
    "WALL TYPE ABUTMENT",
    "POT-PTFE BEARING (TYP.)",
    "LAUNCHING APRON",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "600 THK. FILTER MEDIA",
    "300 THK. APPROACH SLAB",
    "150 THK. PCC LEVELING COURSE",
    "1200Ø RCC CAST IN SITU PILE (TYP.)",
    "HFL=",
    "LWL=506.000m",
    "NOTES:",
    "CHAINAGE IN (km.)",
    "FRL. (m)",
    "MAIN CARRIAGEWAY",
    "GROUND LEVEL (m)",
    "LHS",
    "RHS"
  ],
  "description": "This crop is an elevation view of a two-span bridge structure between wall-type abutments A1 and A2, with a single RCC column pier P1 at midspan, showing precast PSC girders on pot-PTFE bearings (fixed at pier, free elsewhere), RCC crash barriers, approach slabs, and independent retaining walls with stone pitching and filter media at each end. A pile foundation detail (1200mm dia RCC piles) is shown below the pier, and a chainage/level data table with general notes appears at the bottom of the sheet, though the notes text and part of the table are cut off."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "PSC precast girder",
      "tag": "",
      "shape": "",
      "material": "precast concrete",
      "count": null,
      "note": "Referenced in concrete grade note (M50)"
    },
    {
      "name": "R.C.C. cast in situ deck slab",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade M45"
    },
    {
      "name": "R.C.C. end cross girder",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade M45"
    },
    {
      "name": "R.C.C. intermediate cross girder",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade M45"
    },
    {
      "name": "Bearing pedestal",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade M50"
    },
    {
      "name": "Crash barrier",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade M40"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade M30"
    },
    {
      "name": "Levelling course",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade M15"
    },
    {
      "name": "Dirt wall & slab",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": null,
      "note": "Concrete grade M35"
    },
    {
      "name": "Abutment",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade M45; part of abutment & pier group"
    },
    {
      "name": "Pier",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade M45; part of abutment & pier group"
    },
    {
      "name": "Pile foundation",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": null,
      "note": "Concrete grade M35"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Strip seal type as per MORTH specification"
    },
    {
      "name": "Drainage spout",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Provided in deck slab per MORTH specification"
    },
    {
      "name": "Bituminous concrete layer",
      "tag": "",
      "shape": "",
      "material": "bituminous concrete",
      "count": null,
      "note": "50mm thick, single layer"
    },
    {
      "name": "RE wall / backfill",
      "tag": "",
      "shape": "",
      "material": "selected earth fill",
      "count": null,
      "note": "Behind RE wall, properties C=0, phi>32°, gamma=2T/m3"
    },
    {
      "name": "Gap slab",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Referenced for dimension & reinforcement details in miscellaneous drawing"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": null,
      "note": "Tentative working pile load table given"
    }
  ],
  "measurements": [
    {
      "label": "Clear cover - Foundation",
      "value": "75",
      "unit": "mm",
      "appliesTo": "Foundation"
    },
    {
      "label": "Clear cover - Abutment & Abutment Cap",
      "value": "45",
      "unit": "mm",
      "appliesTo": "Abutment"
    },
    {
      "label": "Clear cover - Pier & Pier Cap",
      "value": "45",
      "unit": "mm",
      "appliesTo": "Pier"
    },
    {
      "label": "Clear cover - Superstructure",
      "value": "45",
      "unit": "mm",
      "appliesTo": "Superstructure"
    },
    {
      "label": "Bituminous concrete thickness",
      "value": "50",
      "unit": "MM",
      "appliesTo": "Bituminous concrete layer"
    },
    {
      "label": "Bearing/pedestal depth basis",
      "value": "400",
      "unit": "mm",
      "appliesTo": "Pier cap / Bearing pedestal"
    },
    {
      "label": "Minimum bearing height threshold",
      "value": "200",
      "unit": "mm",
      "appliesTo": "Bearing"
    },
    {
      "label": "Pedestal adjustment height",
      "value": "200",
      "unit": "mm",
      "appliesTo": "Pedestal"
    },
    {
      "label": "Max vertical pile load",
      "value": "300",
      "unit": "T",
      "appliesTo": "Pile"
    },
    {
      "label": "Lateral pile load",
      "value": "50",
      "unit": "T",
      "appliesTo": "Pile"
    },
    {
      "label": "Selected earth fill cohesion",
      "value": "0",
      "unit": "",
      "appliesTo": "RE wall backfill"
    },
    {
      "label": "Selected earth fill friction angle",
      "value": ">32",
      "unit": "degrees",
      "appliesTo": "RE wall backfill"
    },
    {
      "label": "Selected earth fill unit weight",
      "value": "2",
      "unit": "T/m3",
      "appliesTo": "RE wall backfill"
    }
  ],
  "notes": [
    "ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN METERS UNLESS OTHERWISE SPECIFIED.",
    "DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIMENSIONS SHALL BE FOLLOWED.",
    "THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RESPECTIVE HIGHWAY ALIGNMENT DRAWINGS.",
    "THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLASS A, ONE LANE CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R + ONE LANE OF 70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED AS LIVE LOAD.",
    "GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONENTS SHALL BE AS FOLLOWS:- PSC PRECAST GIRDER-M50; R.C.C. CAST IN SITU DECK SLAB-M45; R.C.C. END CROSS GIRDER-M45; R.C.C. INTERMEDIATE CROSS GIRDER-M45; BEARING PEDESTAL-M50; CRASH BARRIER-M40; APPROACH SLAB-M30; LEVELLING COURSE-M15; DIRT WALL & SLAB-M35; ABUTMENT & PIER-M45; PILE FOUNDATION-M35.",
    "CLEAR COVER TO ANY REINFORCEMENTS SHALL BE AS FOLLOWS: FOUNDATION...75mm; SUBSTRUCTURE ABUTMENT & ABUTMENT CAP...45mm, PIER & PIER CAP...45mm; SUPERSTRUCTURE...45mm.",
    "ALL REINFORCING STEEL SHOULD BE HIGH YIELD STRENGTH DEFORMED (TMT) BARS OF GRADE-Fe 550D, CONFORMING TO IS: 1786.",
    "STRIP SEAL TYE OF EXPANSION JOINT SHALL BE PROVIDED AS PER M O R T H SPECIFICATION.",
    "BITUMINOUS CONCRETE 50MM THICK LAID IN SINGLE LAYER.",
    "FRL, CAMBER / SUPER ELEVATION & LAYOUT SHALL BE FOLLOWED AS PER LATEST PLAN & PROFILE DRAWING.",
    "DRAINAGE SPOUT SHALL BE PROVIDED IN DECK SLAB AS PER M O R T H SPECIFICATION.",
    "BACK FILLING MATERIAL BEHIND ABUTMENT SHALL BE WELL COMPACTED AS PER APPENDIX 6 OF IRC 78:2014 & M O R T H SPECIFICATION BEFORE RESTING THE SUPERSTRUCTURE.",
    "THE STRUCTURE IS LOCATED IN SEISMIC ZONE III AND WIND ZONE IV & 'SEVERE' EXPOSURE CONDITION.",
    "DIMENSION OF STRUCTURES ARE TENTATIVE AND WILL BE FINALIZED AFTER DETAIL DESIGN.",
    "THE SELECTED EARTH FILL USED FOR BACKFILLING BEHIND RE WALL SHALL HAVE THE FOLLOWING PROPERTIES. C=0, ø>32°, γ=2T/m3",
    "THE PIERCAP TOP LEVEL HAS BEEN FIXED CONSIDERING 400mm DEPTH OF BRG. & PEDESTAL. IN CASE THE BEARING HEIGHT IS LESS THAN THAT OF 200mm THEN THE HEIGHT OF THE BEARING SHALL BE ADJUSTED IN 200mm PEDESTAL.",
    "FOR DIMENSION & REINFORCEMENT DETAILS OF APPROACH SLAB, GAP SLAB, CRASH BARRIER & DRAINAGE SPOUTS REFER MISCELLANEOUS DRG.",
    "TENTATIVE WORKING PILE LOAD AND SUBJECTED TO CHANGE AS PER DETAILED DESIGN:-"
  ],
  "labels": [
    "NOTES:",
    "MAX. VERTICAL LOAD",
    "LATERAL LOAD"
  ],
  "description": "This crop is a general notes block (Sheet page 2) for a bridge project, listing 18 numbered construction notes covering dimensioning conventions, live load design basis, concrete grades for each structural component, reinforcement clear cover requirements, rebar material specification, expansion joint and drainage spout provisions, backfilling requirements, seismic/wind zone classification, and a tentative pile load table. It contains no plan, section, or elevation geometry, only textual specifications and a small load table (max vertical load 300T, lateral load 50T) applicable to pile foundations."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "tapered/trapezoidal",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Abutment section with sloped back face and seismic stopper"
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "POT-PTFE",
      "count": 1,
      "note": "Labeled POT-PTFE BEARING (TYP.), located at abutment top"
    },
    {
      "name": "Seismic Stopper",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Labeled RCC SEISMIC STOPPER"
    },
    {
      "name": "Expansion Joint",
      "tag": "",
      "shape": "linear gap",
      "material": "",
      "count": 1,
      "note": "Centerline of expansion joint shown with gap dimension"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "cast-in-situ concrete",
      "count": 4,
      "note": "1200 dia bored cast-in-situ piles, shown in dashed elevation below abutment"
    },
    {
      "name": "Filter Layer",
      "tag": "",
      "shape": "",
      "material": "granular filter",
      "count": 1,
      "note": "600 THK. FILTER (partial label) shown near ground level"
    },
    {
      "name": "Stone Pitching",
      "tag": "",
      "shape": "",
      "material": "stone",
      "count": 1,
      "note": "STONE PITCHIN(G) label, partial text, embankment slope protection"
    },
    {
      "name": "Approach Embankment/Slope Fill",
      "tag": "",
      "shape": "tapered",
      "material": "granular fill",
      "count": 1,
      "note": "Hatched fill material forming approach slope behind abutment"
    },
    {
      "name": "Wing Wall/Return",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Small stepped concrete element near top left, partially visible with break line"
    }
  ],
  "measurements": [
    {
      "label": "Distance from CL BRG to CL EXP JOINT (SQ)",
      "value": "1070",
      "unit": "",
      "appliesTo": "A2 abutment"
    },
    {
      "label": "Distance from CL BRG to CL EXP JOINT (SK)",
      "value": "1236",
      "unit": "",
      "appliesTo": "A2 abutment"
    },
    {
      "label": "Expansion gap (SQ)",
      "value": "80",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "Expansion gap (SK)",
      "value": "92",
      "unit": "",
      "appliesTo": "expansion joint"
    },
    {
      "label": "Width dimension",
      "value": "3500",
      "unit": "",
      "appliesTo": "top slab/deck near abutment"
    },
    {
      "label": "Vertical dimension",
      "value": "230",
      "unit": "",
      "appliesTo": "deck/slab thickness at top"
    },
    {
      "label": "Vertical dimension",
      "value": "2650",
      "unit": "",
      "appliesTo": "abutment stem height"
    },
    {
      "label": "Horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "abutment top step"
    },
    {
      "label": "Horizontal dimension",
      "value": "2850",
      "unit": "",
      "appliesTo": "abutment top area"
    },
    {
      "label": "Horizontal dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "lower abutment/slope area"
    },
    {
      "label": "Pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "piles"
    },
    {
      "label": "Pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "piles"
    },
    {
      "label": "Pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "piles"
    },
    {
      "label": "Edge distance",
      "value": "750",
      "unit": "",
      "appliesTo": "pile group left edge"
    },
    {
      "label": "Edge distance",
      "value": "750",
      "unit": "",
      "appliesTo": "pile group right edge"
    },
    {
      "label": "Total pile group width",
      "value": "12300",
      "unit": "",
      "appliesTo": "pile group"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "Filter thickness",
      "value": "600",
      "unit": "THK",
      "appliesTo": "filter layer"
    },
    {
      "label": "Scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "Section A-A"
    }
  ],
  "notes": [
    "POT-PTFE BEARING (TYP.)",
    "RCC SEISMIC STOPPER",
    "STONE PITCHIN(G) [partial]",
    "INDEPENDENT F [partial, likely 'INDEPENDENT FOOTING' or similar]",
    "600 THK. FILTE [partial, likely 'FILTER']",
    "1200 DIA BORED [partial]",
    "CAST-IN-SITU PI [partial, likely 'PILE']",
    "CL OF EXP. JOINT",
    "CL OF BRG."
  ],
  "labels": [
    "A2",
    "SECTION A-A",
    "(SCALE 1:150)"
  ],
  "description": "This crop shows a cross-section (Section A-A) through abutment A2 of a bridge, illustrating the abutment stem, bearing arrangement (POT-PTFE bearing with RCC seismic stopper), expansion joint gap dimensions for square and skew geometries, backfill and slope protection details, and a row of four bored cast-in-situ piles with spacing dimensions below the abutment. It documents structural and geometric details needed for abutment, bearing, and foundation pile quantities."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "tapered/battered",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Abutment with backwall supporting bearing seat, shown with sloped face against embankment"
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "PTFE/elastomeric (Pot-PTFE)",
      "count": 1,
      "note": "Labeled POT-PTFE BEARING (TYP.), seated on abutment cap"
    },
    {
      "name": "Seismic Stopper",
      "tag": "",
      "shape": "rectangular block",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Labeled RCC SEISMIC STOPPER, adjacent to bearing"
    },
    {
      "name": "Expansion Joint",
      "tag": "",
      "shape": "linear gap",
      "material": "",
      "count": 1,
      "note": "Located at centerline of exp. joint, gap dimensions given as 80(SQ)/92(SK)"
    },
    {
      "name": "Deck/Girder",
      "tag": "",
      "shape": "rectangular slab with haunch",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Top slab shown with 230 thickness dimension and 3500(SQ) span reference"
    },
    {
      "name": "Retaining Wall",
      "tag": "",
      "shape": "vertical wall",
      "material": "reinforced concrete (implied)",
      "count": 1,
      "note": "Labeled INDEPENDENT RETAINING WALL, separate from abutment"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "cast-in-situ concrete",
      "count": 4,
      "note": "Labeled 1200 DIA BORED CAST-IN-SITU PILES, shown in elevation/plan strip below section, 4 piles visible with spacing"
    },
    {
      "name": "Stone Pitching",
      "tag": "",
      "shape": "sloped layer",
      "material": "stone",
      "count": 1,
      "note": "Labeled STONE PITCHING on embankment slope"
    },
    {
      "name": "Filter Media",
      "tag": "",
      "shape": "layer",
      "material": "granular fill",
      "count": 1,
      "note": "Labeled 600 THK. FILTER MEDIA behind retaining wall"
    },
    {
      "name": "Embankment/Backfill",
      "tag": "",
      "shape": "sloped fill",
      "material": "earth/granular",
      "count": 1,
      "note": "Shown with hatching, sloped approach fill behind abutment"
    },
    {
      "name": "Ground Line",
      "tag": "",
      "shape": "irregular line",
      "material": "",
      "count": 1,
      "note": "Existing ground surface shown with break line at far right"
    }
  ],
  "measurements": [
    {
      "label": "",
      "value": "1070",
      "unit": "mm",
      "appliesTo": "distance from bearing CL to exp. joint CL, square case (SQ)"
    },
    {
      "label": "",
      "value": "1236",
      "unit": "mm",
      "appliesTo": "distance from bearing CL to exp. joint CL, skew case (SK)"
    },
    {
      "label": "",
      "value": "80",
      "unit": "mm",
      "appliesTo": "expansion gap, square case (SQ)"
    },
    {
      "label": "",
      "value": "92",
      "unit": "mm",
      "appliesTo": "expansion gap, skew case (SK), labeled EXP.GAP"
    },
    {
      "label": "",
      "value": "230",
      "unit": "mm",
      "appliesTo": "deck slab thickness"
    },
    {
      "label": "",
      "value": "3500",
      "unit": "mm",
      "appliesTo": "span/offset dimension (SQ) at deck level"
    },
    {
      "label": "",
      "value": "2650",
      "unit": "mm",
      "appliesTo": "vertical dimension, abutment section height"
    },
    {
      "label": "",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "horizontal dimension near bearing seat"
    },
    {
      "label": "",
      "value": "2850",
      "unit": "mm",
      "appliesTo": "horizontal dimension near bearing seat"
    },
    {
      "label": "",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "horizontal offset dimension near retaining wall base"
    },
    {
      "label": "",
      "value": "750",
      "unit": "mm",
      "appliesTo": "pile spacing, edge distance (left)"
    },
    {
      "label": "",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "pile spacing (x3)"
    },
    {
      "label": "",
      "value": "750",
      "unit": "mm",
      "appliesTo": "pile spacing, edge distance (right)"
    },
    {
      "label": "",
      "value": "12300",
      "unit": "mm",
      "appliesTo": "total pile group width"
    },
    {
      "label": "",
      "value": "600",
      "unit": "mm",
      "appliesTo": "filter media thickness"
    },
    {
      "label": "",
      "value": "1200",
      "unit": "mm",
      "appliesTo": "pile diameter"
    },
    {
      "label": "1:150",
      "value": "1:150",
      "unit": "",
      "appliesTo": "drawing scale"
    }
  ],
  "notes": [
    "POT-PTFE BEARING (TYP.)",
    "RCC SEISMIC STOPPER",
    "STONE PITCHING",
    "INDEPENDENT RETAINING WALL",
    "600 THK. FILTER MEDIA",
    "1200 DIA BORED CAST-IN-SITU PILES"
  ],
  "labels": [
    "A2",
    "C OF EXP. JOINT",
    "C OF BRG.",
    "SECTION A-A",
    "(SCALE 1:150)"
  ],
  "description": "This crop shows a cross-section (Section A-A) through abutment A2 of a bridge, detailing the bearing arrangement, seismic stopper, expansion joint gap dimensions for square and skew conditions, the sloped embankment fill with stone pitching, an independent retaining wall with filter media, and a row of four 1200mm diameter bored cast-in-situ piles with their spacing dimensions. It documents the abutment structural detail, foundation piling layout, and associated earthwork/retaining elements at this location."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "tapered/rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one at each outer edge of deck"
    },
    {
      "name": "footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "located between crash barrier and carriageway on each side"
    },
    {
      "name": "RCC cast-in-situ deck slab",
      "tag": "",
      "shape": "slab with 2.5% cross slope",
      "material": "reinforced concrete",
      "count": 1,
      "note": "spans full width, shown with wearing course on top"
    },
    {
      "name": "wearing course",
      "tag": "",
      "shape": "layer, 50mm thick",
      "material": "asphalt/bituminous (WC)",
      "count": 1,
      "note": "50mm THK. WC over deck, both carriageways"
    },
    {
      "name": "cantilever median wall",
      "tag": "",
      "shape": "rectangular, cantilevered",
      "material": "concrete",
      "count": 1,
      "note": "located at centerline of proposed road, between the two carriageways"
    },
    {
      "name": "expansion/sealant gap",
      "tag": "",
      "shape": "20mm gap",
      "material": "polysulphide sealant",
      "count": 1,
      "note": "20mm gap filled with polysulphide sealant, near median"
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one under each abutment (A1 side and A2 side), width 16550 each"
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "square/circular in plan (shown as dashed boxes with cross symbol)",
      "material": "reinforced concrete (cast-in-situ, presumed)",
      "count": null,
      "note": "multiple piles shown in a row under each pile cap; exact count not clearly determinable due to symbol overlap, appears as repeating pattern of 5 positions per cap"
    },
    {
      "name": "PCC blinding/leveling layer",
      "tag": "PCC M-15",
      "shape": "layer",
      "material": "PCC M-15",
      "count": 1,
      "note": "below pile cap, labeled PCC M-15"
    },
    {
      "name": "embankment/slope fill",
      "tag": "",
      "shape": "sloped fill (2:1 shown as 1/2)",
      "material": "earth fill (implied)",
      "count": 2,
      "note": "shown schematically as hatched slope lines beyond ROW on both sides"
    }
  ],
  "measurements": [
    {
      "label": "ROW total width",
      "value": "80000",
      "unit": "",
      "appliesTo": "overall right-of-way"
    },
    {
      "label": "ROW half width",
      "value": "40000",
      "unit": "",
      "appliesTo": "each side of centerline"
    },
    {
      "label": "Deck half width",
      "value": "16550",
      "unit": "",
      "appliesTo": "deck/pile cap width each side"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "each carriageway (LHS and RHS)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "footpath each side"
    },
    {
      "label": "Crash barrier width",
      "value": "450",
      "unit": "",
      "appliesTo": "crash barrier each side"
    },
    {
      "label": "Edge offset",
      "value": "450",
      "unit": "",
      "appliesTo": "between crash barrier and footpath/deck edge"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "",
      "appliesTo": "centerline gap between carriageways"
    },
    {
      "label": "FRL offset",
      "value": "100",
      "unit": "",
      "appliesTo": "FRL marks near median"
    },
    {
      "label": "Wearing course thickness",
      "value": "50",
      "unit": "mm",
      "appliesTo": "WC layer on deck"
    },
    {
      "label": "Deck cross slope",
      "value": "2.5",
      "unit": "%",
      "appliesTo": "deck slab slope"
    },
    {
      "label": "Sealant gap width",
      "value": "20",
      "unit": "mm",
      "appliesTo": "gap at median, polysulphide sealant"
    },
    {
      "label": "Pile cap depth reference",
      "value": "1000",
      "unit": "",
      "appliesTo": "vertical dimension near pile cap top"
    },
    {
      "label": "Pile spacing pattern",
      "value": "1275 / 3500 / 3500 / 3500 / 3500 / 1275",
      "unit": "",
      "appliesTo": "spacing across deck section (upper girder/beam grid)"
    },
    {
      "label": "Pile cap plan spacing",
      "value": "775 / 3750 / 3750 / 3750 / 3750 / 775",
      "unit": "",
      "appliesTo": "pile cap width breakdown, each abutment"
    },
    {
      "label": "ACTL A1 L/S",
      "value": "514.674",
      "unit": "",
      "appliesTo": "Abutment cap top level, A1 left side"
    },
    {
      "label": "ACTL A2 L/S",
      "value": "516.136",
      "unit": "",
      "appliesTo": "Abutment cap top level, A2 left side"
    },
    {
      "label": "ACTL A1 R/S",
      "value": "514.839",
      "unit": "",
      "appliesTo": "Abutment cap top level, A1 right side"
    },
    {
      "label": "ACTL A2 R/S",
      "value": "516.318",
      "unit": "",
      "appliesTo": "Abutment cap top level, A2 right side"
    },
    {
      "label": "PCTL A1 L/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level, A1 left side"
    },
    {
      "label": "PCTL A2 L/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level, A2 left side"
    },
    {
      "label": "PCTL A1 R/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level, A1 right side"
    },
    {
      "label": "PCTL A2 R/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level, A2 right side"
    },
    {
      "label": "PCBL A1 L/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A1 left side"
    },
    {
      "label": "PCBL A2 L/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A2 left side"
    },
    {
      "label": "PCBL A1 R/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A1 right side"
    },
    {
      "label": "PCBL A2 R/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A2 right side"
    },
    {
      "label": "PILE TIP LVL A1 L/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile tip level, A1 left side"
    },
    {
      "label": "PILE TIP LVL A2 L/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile tip level, A2 left side"
    },
    {
      "label": "PILE TIP LVL A1 R/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile tip level, A1 right side"
    },
    {
      "label": "PILE TIP LVL A2 R/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile tip level, A2 right side"
    },
    {
      "label": "Slope symbol",
      "value": "2:1",
      "unit": "",
      "appliesTo": "embankment slope, both sides"
    },
    {
      "label": "Scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "Section at Abutment Location at A1 & A2"
    }
  ],
  "notes": [
    "50mm THK. (WC)",
    "RCC CAST IN SITU DECK SLOPE 2.5%",
    "20mm GAP FILLED WITH POLYSULPHIDE SEALANT",
    "CANTILEVER MEDIAN WALL",
    "PCC M-15"
  ],
  "labels": [
    "SECTION AT ABUTMENT LOCATION AT A1 & A2",
    "(SCALE 1:150)",
    "ROW",
    "€ OF PROPOSED ROAD",
    "€ OF LHS (CARRIAGEWAY)",
    "€ OF RHS (CARRIAGEWAY)",
    "FRL",
    "RCC CRASH BARRIER",
    "FOOTPATH"
  ],
  "description": "This crop is a cross section of a bridge deck taken at the abutment locations A1 and A2, showing the full 80m right-of-way with two carriageways, footpaths, crash barriers, a central cantilever median wall, and the deck slab with wearing course and cross slope. Below the deck, the section shows the pile cap layout with rows of piles under each abutment along with reference elevations (ACTL, PCTL, PCBL, pile tip levels) for both the A1 and A2 abutments, left and right sides. It is primarily a substructure/superstructure combined cross section documenting deck geometry, pile cap dimensions, and key design elevations rather than a single component detail."
}