Drawing → BOQ
← Mindmapwhat the drawings said

Footpath

2 pages · 9 crops · ×16 · pavement

Matched toBridge Footpathbridge.superstructure.deck_system.footpathon “Footpath”

3 read off the drawings · 1 not established
The class asks forValueHowFrom
LengthLwants m/mmnot establishedLength of the footpath (its run along the bridge) is never dimensioned on its own in any of the plan or section crops; only widths, offsets and thicknesses for the footpath are labelled. Deriving it from the overall bridge length would be guessing an owner for a dimension that is not tagged to the footpath.not found
WidthWwants m/mm1500 mmDirectly read: 'Footpath width' = 1500 (appears identically in multiple plan and section crops, e.g. p01_r05 'Footpath width':1500, p03_r01 'Footpath width':1500).Multiple independent crops (plan and cross-section) consistently label the footpath strip width as 1500, both on the plan (between crash barrier and carriageway) and in the transverse section, confirming this is the footpath's own dimension.readp1 · p01_r05p3 · p03_r01 cross section of deck footpath crash barrier and pile cap at abutment
ThicknessTwants m/mm100 mmDirectly read: crop p03_r02 lists a measurement labelled 'Footpath thickness' with value '100', appliesTo 'Footpath'.This is the only crop that explicitly names the 100 value as 'Footpath thickness' rather than as an unlabeled edge/offset dimension; other crops show the same numeric value (100) near the footpath but describe it only as an 'edge dimension' or 'kerb dimension' without confirming it is thickness, so this single explicit label is used as the basis.readcheckp3 · p03_r02 cross section of deck and pile cap at pier p1
Instance CountNwants count2 countObject counts for 'Footpath' are given as 2 in several crops (e.g. p01_r05: 'count':2, note 'Along both outer edges of the deck'; p03_r01: 'count':2, note 'located between crash barrier and carriageway on each side').Both plan and cross-section views consistently show one footpath strip on each side of the deck (left and right carriageway edges), giving a total instance count of 2.readp1 · p01_r05p3 · p03_r01

Worked out by anthropic/claude-sonnet-5 from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

Every dimension read for it4

  • 1500Footpath widthp1 · p01_r03 half plan of bridge deck with crash barriers
  • 1500Footpath widthp1 · p01_r04 half plan showing deck level
  • 1500 mmFootpath widthp1 · p01_r05 half plan showing deck level
  • 1500Footpath widthp3 · p03_r01 cross section of deck footpath crash barrier and pile cap at abutment

Notes on the sheets that carry it

  • p1TO DEWAS (direction arrow)
  • p15000 (TYP.)
  • p1RCC CRASH BARRIER
  • p1C OF EXP. JOINT
  • p1C BRIDGE (RIGHT SIDE)
  • p1APPROACH SLAB
  • p1C/L OF EXP. JOINT
  • p1C/L OF MEDIAN
  • p1C/L BRIDGE (RIGHT SIDE)
  • p1C/L BRIDGE (LEFT SIDE)
  • p1TO DEWAS
  • p1TO PIKARADIYA
  • p130° SKEW
  • p1HALF PLAN SHOWING DECK LEVEL
  • p1HALF PLAN SHOWI[NG...] (text cut off)
  • p1(SCALE 1:300)
  • p1HALF PLAN SHOWING DECK LEVEL (SCALE 1:300)
  • p1FOOTPATH
  • p1RCC CRA... (truncated, likely 'RCC CRASH BARRIER')
  • p350mm THK. (WC)
  • p3RCC CAST IN SITU DECK SLOPE 2.5%
  • p320mm GAP FILLED WITH POLYSULPHIDE SEALANT
  • p3CANTILEVER MEDIAN WALL
  • p3PCC M-15
  • p3READ THIS DRAWING IN CONJUNCTION WITH OTHER SHEETS OF THE SAME DRAWING NUMBER

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r04

page 1 · bridge_deck_and_approach_p01_r04
Original
p01_r04
{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Marked at left with circle symbol, at centerline of expansion joint"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Marked at right with circle symbol"
    },
    {
      "name": "Crash Barrier",
      "tag": "",
      "shape": "linear/rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Labelled RCC CRASH BARRIER, runs along carriageway edge"
    },
    {
      "name": "Deck Slab / Carriageway",
      "tag": "",
      "shape": "rectangular/tapered in plan",
      "material": "",
      "count": 1,
      "note": "Shown in plan with joints/markings, width labelled"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Located adjacent to carriageway, width dimensions given"
    },
    {
      "name": "Expansion Joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline marked at A1"
    },
    {
      "name": "Drainage/Deck inlet or joint markers",
      "tag": "",
      "shape": "small square symbols",
      "material": "",
      "count": 8,
      "note": "Repeated small square symbols along carriageway, spacing 5000 TYP, possibly scuppers or expansion joint markers"
    },
    {
      "name": "Trees/Vegetation symbols",
      "tag": "",
      "shape": "circular cluster symbols",
      "material": "",
      "count": 10,
      "note": "Landscaping symbols near abutment, likely tree plantation area or embankment slope planting"
    },
    {
      "name": "Wingwall/Slope hatching",
      "tag": "",
      "shape": "tapered hatched area",
      "material": "",
      "count": 1,
      "note": "Hatched fan-shaped area near A1 indicating slope or wingwall footprint"
    }
  ],
  "measurements": [
    {
      "label": "Overall length SQ",
      "value": "40000",
      "unit": "",
      "appliesTo": "A1 to P1 span, square measurement"
    },
    {
      "label": "Overall length SK",
      "value": "46189",
      "unit": "",
      "appliesTo": "A1 to P1 span, skew measurement"
    },
    {
      "label": "Length SQ",
      "value": "37761",
      "unit": "",
      "appliesTo": "partial span measurement, square"
    },
    {
      "label": "Length SK",
      "value": "43603",
      "unit": "",
      "appliesTo": "partial span measurement, skew"
    },
    {
      "label": "Offset SQ",
      "value": "1070",
      "unit": "",
      "appliesTo": "near A1, square"
    },
    {
      "label": "Offset SK",
      "value": "1236",
      "unit": "",
      "appliesTo": "near A1, skew"
    },
    {
      "label": "Offset SQ",
      "value": "1170",
      "unit": "",
      "appliesTo": "near P1, square"
    },
    {
      "label": "Offset SK",
      "value": "1350",
      "unit": "",
      "appliesTo": "near P1, skew"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "repeated square symbols along carriageway, TYP"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "footpath section"
    },
    {
      "label": "Width dimension",
      "value": "450",
      "unit": "",
      "appliesTo": "edge strip near footpath"
    },
    {
      "label": "Width dimension",
      "value": "100",
      "unit": "",
      "appliesTo": "strip near footpath"
    },
    {
      "label": "Width dimension",
      "value": "450",
      "unit": "",
      "appliesTo": "lower left, near carriageway width label"
    },
    {
      "label": "Carriageway width",
      "value": "6550",
      "unit": "",
      "appliesTo": "width of carriageway, partially cut off (appears as '550 WIDTH')"
    },
    {
      "label": "Slab dimension",
      "value": "3500",
      "unit": "",
      "appliesTo": "slab width, near bottom left"
    },
    {
      "label": "Overall left dimension",
      "value": "40000",
      "unit": "",
      "appliesTo": "total width shown at far left vertical dimension"
    }
  ],
  "notes": [
    "TO DEWAS (direction arrow)",
    "5000 (TYP.)",
    "RCC CRASH BARRIER",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)"
  ],
  "labels": [
    "A1",
    "P1",
    "TO DEWAS",
    "FOOTPATH",
    "C BRIDGE (RIGHT SIDE)",
    "SLAB"
  ],
  "description": "This crop shows a plan view of a bridge approach and deck area between abutment A1 and pier P1, with overall span dimensions given in both square (SQ) and skew (SK) measurements. It details footpath and carriageway widths, an RCC crash barrier along the edge, typical spacing of deck elements at 5000 units, and a landscaped/vegetated area near the abutment with slope hatching, likely representing an embankment or wingwall zone."
}

p01_r04Plan

  • Footpath×1rectangularLocated adjacent to carriageway, width dimensions given

40000 Overall length SQ46189 Overall length SK37761 Length SQ43603 Length SK1070 Offset SQ1236 Offset SK1170 Offset SQ1350 Offset SK+8 more

crop

p01_r05

page 1 · bridge_deck_and_approach_slab_p01_r05
Original
p01_r05
{
  "view": "Plan",
  "objects": [
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular (skewed/angled)",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One shown on each carriageway (left and right), abutting the abutment/expansion joint line, skewed relative to carriageway"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear, rectangular in section",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Runs along both edges of carriageway; small square/rectangular markers along its length possibly denoting posts or joints"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "1500mm wide strip on either outer edge of carriageway"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "Centerline of median (C/L OF MEDIAN) separating the two carriageways, 2900 wide"
    },
    {
      "name": "Expansion joint",
      "tag": "A1",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "C/L of expansion joint marked at top, aligned with grid/section marker A1"
    },
    {
      "name": "Carriageway",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "13500 wide carriageway on each side (right side and left side of bridge)"
    },
    {
      "name": "Drainage/scupper symbols (small hatched squares)",
      "tag": "",
      "shape": "small square",
      "material": "",
      "count": 16,
      "note": "Repeated small square symbols along the crash barrier/approach slab edges, likely drainage spouts or expansion joint markers, spaced at 5000 (TYP.) intervals"
    },
    {
      "name": "Tree/landscaping symbols",
      "tag": "",
      "shape": "irregular circular clusters",
      "material": "",
      "count": null,
      "note": "Decorative planting symbols shown in the splayed embankment/wing areas at both ends of the plan, not a constructional item but shown for context"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "total bridge width (top and bottom)"
    },
    {
      "label": "Carriageway width",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH CARRIAGEWAY (right and left)"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY (right and left)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "FOOTPATH (both sides)"
    },
    {
      "label": "Barrier/edge offset",
      "value": "450",
      "unit": "",
      "appliesTo": "edge strip dimension, repeated at multiple locations"
    },
    {
      "label": "Offset",
      "value": "100",
      "unit": "",
      "appliesTo": "small edge strip dimension, repeated"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "",
      "appliesTo": "C/L OF MEDIAN spacing"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "",
      "appliesTo": "APPROACH SLAB (both left and right)"
    },
    {
      "label": "Barrier/marker spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "typical spacing of RCC crash barrier markers (TYP.)"
    },
    {
      "label": "Square dimension",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "unlabeled dimension near C/L of exp. joint"
    },
    {
      "label": "Skew dimension",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "unlabeled dimension near C/L of exp. joint"
    },
    {
      "label": "Square dimension",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "overall length square measurement"
    },
    {
      "label": "Skew dimension",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "overall length skew measurement"
    },
    {
      "label": "Square dimension",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "secondary length square measurement"
    },
    {
      "label": "Skew dimension",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "secondary length skew measurement"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "APPROACH SLAB",
    "C/L OF EXP. JOINT",
    "C/L OF MEDIAN",
    "C/L BRIDGE (RIGHT SIDE)",
    "C/L BRIDGE (LEFT SIDE)"
  ],
  "labels": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "A1",
    "FOOTPATH",
    "CARRIAGEWAY",
    "WIDTH CARRIAGEWAY",
    "RCC CRASH BARRIER",
    "5000 (TYP.)"
  ],
  "description": "This crop is a plan view of a bridge approach layout showing two carriageways (right side going to Dewas, left side/return to Pikaradiya) separated by a median, with footpaths, RCC crash barriers, and skewed approach slabs at the abutment/expansion joint line marked A1. Dimensions define overall width (40000), carriageway widths (16550/13500), footpath (1500), median (2900), approach slab length (3500), and barrier marker spacing (5000 TYP.), along with square and skew length callouts for the bridge. Decorative tree symbols indicate embankment/landscaped areas at both ends but are not structural elements documented in detail here."
}

p01_r05Plan

  • Footpath×2rectangular strip1500mm wide strip on either outer edge of carriageway

40000 Overall width16550 Carriageway width13500 Carriageway width1500 Footpath width450 Barrier/edge offset100 Offset2900 Median width3500 Approach slab length+7 more

crop

p01_r03

page 1 · deck_p01_r03
Original
p01_r03
{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Located at left end of bridge deck, centerline of expansion joint marked at this location"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Intermediate support shown on right side of plan"
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular (skewed)",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Two carriageways shown, right side and left side of bridge"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear",
      "material": "reinforced concrete",
      "count": 4,
      "note": "Runs along edges of carriageways and median side"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown at both approach ends adjacent to abutment/embankment"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Located at outer edges of each carriageway"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "Centerline of median shown between the two bridge carriageways"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline of expansion joint marked at abutment A1"
    },
    {
      "name": "Embankment/slope protection area",
      "tag": "",
      "shape": "fan/radial pattern",
      "material": "",
      "count": 2,
      "note": "Shown as planting/turfing pattern at both approach ends beyond abutment and pier extents"
    }
  ],
  "measurements": [
    {
      "label": "ROW width",
      "value": "80000",
      "unit": "",
      "appliesTo": "overall right-of-way"
    },
    {
      "label": "Width (each side)",
      "value": "40000",
      "unit": "",
      "appliesTo": "one carriageway side width"
    },
    {
      "label": "Bridge width",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH label, right side"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY, right side"
    },
    {
      "label": "Footpath dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "footpath, right side"
    },
    {
      "label": "Kerb offset",
      "value": "100",
      "unit": "",
      "appliesTo": "footpath adjacent dimension"
    },
    {
      "label": "Barrier offset",
      "value": "450",
      "unit": "",
      "appliesTo": "crash barrier position, repeated multiple locations"
    },
    {
      "label": "Median offset",
      "value": "2900",
      "unit": "",
      "appliesTo": "centerline of median dimension"
    },
    {
      "label": "Width (left side)",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH label, left side"
    },
    {
      "label": "Carriageway width (left)",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY, left side"
    },
    {
      "label": "Span/typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "TYP. spacing between markings/barrier posts"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "",
      "appliesTo": "Approach slab dimension"
    },
    {
      "label": "Overall square length",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "deck span between A1 and P1, square measurement"
    },
    {
      "label": "Overall skew length",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "deck span between A1 and P1, skew measurement"
    },
    {
      "label": "Span length square",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "span between A1 and P1 centerlines, square"
    },
    {
      "label": "Span length skew",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "span between A1 and P1 centerlines, skew"
    },
    {
      "label": "Offset square",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "expansion joint offset at A1, square"
    },
    {
      "label": "Offset skew",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "expansion joint offset at A1, skew"
    },
    {
      "label": "Offset square",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "offset at P1, square"
    },
    {
      "label": "Offset skew",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "offset at P1, skew"
    },
    {
      "label": "Segment spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "repeated girder/beam spacing along right side, four instances"
    },
    {
      "label": "Segment spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "repeated girder/beam spacing along left side, four instances"
    },
    {
      "label": "Total width dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "overall width right side, repeated"
    },
    {
      "label": "Edge offset",
      "value": "1275",
      "unit": "",
      "appliesTo": "edge dimension near P1 and far right/bottom edges, multiple instances"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "skew angle at P1 support line"
    }
  ],
  "notes": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "30° SKEW",
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWI[NG...] (text cut off)",
    "(SCALE 1:300)"
  ],
  "labels": [
    "A1",
    "P1",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)",
    "C BRIDGE (LEFT SIDE)",
    "C OF MEDIAN",
    "APPROACH SLAB",
    "RCC CRASH BARRIER",
    "FOOTPATH",
    "WIDTH",
    "CARRIAGEWAY",
    "ROW"
  ],
  "description": "This crop is a half plan view of a bridge deck at deck level, showing two parallel carriageways (right side toward Dewas and left side toward Pikaradiya) separated by a median, with abutment A1 at one end and pier P1 at the other end at a 30° skew angle. It documents overall geometry including carriageway widths, footpath widths, RCC crash barrier locations, approach slab dimensions, and span lengths given in both square and skew measurements; embankment/turfed slope areas are shown schematically beyond the abutment and pier lines. The drawing is a plan-level layout, not an elevation or section, and the right-hand edge of the sheet appears cropped, cutting off part of the title text."
}

p01_r03Plan

  • Footpath×2rectangularLocated at outer edges of each carriageway

80000 ROW width40000 Width (each side)16550 Bridge width13500 Carriageway width1500 Footpath dimension100 Kerb offset450 Barrier offset2900 Median offset+17 more

crop

p01_r03 half plan of bridge deck with crash barriers

page 1 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p01_r03_half_plan_of_bridge_deck_with_crash_barriers
Original
p01_r03 half plan of bridge deck with crash barriers
{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at left end of bridge, at expansion joint centerline"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at right end of shown span"
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular (skewed)",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in half plan at deck level, skewed 30°"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One on right-side carriageway approach, one on left-side carriageway approach"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear",
      "material": "reinforced concrete",
      "count": 4,
      "note": "Running along both edges of both carriageways"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "At centerline near abutment A1"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "On both outer edges of the deck, at top and bottom of plan"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline of median between left and right bridge carriageways"
    },
    {
      "name": "Girders (deck beams)",
      "tag": "",
      "shape": "longitudinal parallel lines",
      "material": "",
      "count": null,
      "note": "Shown as multiple parallel lines representing girder layout beneath deck, spaced at 3500 typical"
    },
    {
      "name": "Tree/landscape symbols",
      "tag": "",
      "shape": "circular clusters",
      "material": "",
      "count": null,
      "note": "Decorative landscaping symbols shown near abutment approach areas, not a constructional item but shown for context"
    }
  ],
  "measurements": [
    {
      "label": "Overall ROW width",
      "value": "80000",
      "unit": "",
      "appliesTo": "Right of way"
    },
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "Bridge cross width (top)"
    },
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "Bridge cross width (bottom)"
    },
    {
      "label": "Span length (square)",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "Span between A1 and P1, square measurement"
    },
    {
      "label": "Span length (skew)",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "Span between A1 and P1, skew measurement"
    },
    {
      "label": "Span length (square) right side",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "Span beyond P1, square measurement"
    },
    {
      "label": "Span length (skew) right side",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "Span beyond P1, skew measurement"
    },
    {
      "label": "Distance (square)",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "Distance between expansion joint and P1 area"
    },
    {
      "label": "Distance (skew)",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "Distance between expansion joint and P1 area (skew)"
    },
    {
      "label": "Offset (square)",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "Near abutment A1, expansion joint offset"
    },
    {
      "label": "Offset (skew)",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "Near abutment A1, expansion joint offset (skew)"
    },
    {
      "label": "Offset (square)",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "Near pier P1"
    },
    {
      "label": "Offset (skew)",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "Near pier P1 (skew)"
    },
    {
      "label": "Spacing (typical)",
      "value": "5000",
      "unit": "",
      "appliesTo": "RCC crash barrier post spacing, typical"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "Carriageway (both sides)"
    },
    {
      "label": "Width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Bridge width (both carriageways)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "Footpath"
    },
    {
      "label": "Dimension",
      "value": "450",
      "unit": "",
      "appliesTo": "Edge strip near footpath/crash barrier"
    },
    {
      "label": "Dimension",
      "value": "100",
      "unit": "",
      "appliesTo": "Edge strip near footpath/crash barrier"
    },
    {
      "label": "Median offset",
      "value": "2900",
      "unit": "",
      "appliesTo": "Centerline of median"
    },
    {
      "label": "Girder spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "Approach slab / girder spacing, repeated multiple times"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "Bridge skew angle at P1"
    },
    {
      "label": "Offset",
      "value": "1275",
      "unit": "",
      "appliesTo": "Edge offset near P1, top and bottom"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "5000 (TYP.)",
    "30° SKEW",
    "HALF PLAN SHOWING DECK LEVEL (SCALE 1:300)"
  ],
  "labels": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "A1",
    "P1",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)",
    "C BRIDGE (LEFT SIDE)",
    "C OF MEDIAN",
    "APPROACH SLAB",
    "FOOTPATH",
    "CARRIAGEWAY",
    "WIDTH",
    "ROW",
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOW..."
  ],
  "description": "This crop shows a half-plan view at deck level of a skewed highway bridge between abutment A1 and pier P1, with the corresponding half plan on the far side extending beyond P1. It details the carriageway widths, footpaths, median, RCC crash barriers, approach slabs, and the 30° skew angle, along with square and skew dimensions for span lengths and offsets. The drawing also indicates directional references 'TO DEWAS' and 'TO PIKARADIYA' and shows landscaped areas near both abutment approaches."
}

p01_r03 half plan of bridge deck with crash barriersPlan

  • Footpath×2rectangular stripOn both outer edges of the deck, at top and bottom of plan

80000 Overall ROW width40000 Overall width40000 Overall width40000(SQ) Span length (square)46189(SK) Span length (skew)40000(SQ) Span length (square) right side46189(SK) Span length (skew) right side37761(SQ) Distance (square)+15 more

crop

p01_r04 half plan showing deck level

page 1 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p01_r04_half_plan_showing_deck_level
Original
p01_r04 half plan showing deck level
{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "marked with circle symbol, at expansion joint centerline"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "marked with circle symbol at far right"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "centerline shown at A1"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear",
      "material": "reinforced concrete",
      "count": 1,
      "note": "runs along edge of carriageway, callout labeled"
    },
    {
      "name": "Deck slab",
      "tag": "SLAB",
      "shape": "rectangular/skewed",
      "material": "",
      "count": 1,
      "note": "labeled centerline dimension 3500 shown near slab edge"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "width 1500 shown with hatching pattern"
    },
    {
      "name": "Expansion joint markers",
      "tag": "",
      "shape": "small square symbols",
      "material": "",
      "count": 9,
      "note": "repeated small square symbols spaced along deck, likely joint/drainage or bearing markers"
    },
    {
      "name": "Landscaping/tree symbols",
      "tag": "",
      "shape": "circular cluster symbols",
      "material": "",
      "count": 8,
      "note": "decorative planting shown in fan-shaped area near abutment"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "cross-section width at left edge"
    },
    {
      "label": "Footpath offset",
      "value": "450",
      "unit": "",
      "appliesTo": "footpath edge dimension"
    },
    {
      "label": "Gap dimension",
      "value": "100",
      "unit": "",
      "appliesTo": "small gap near footpath"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "FOOTPATH"
    },
    {
      "label": "Carriageway width",
      "value": "450",
      "unit": "",
      "appliesTo": "below footpath, partial label '...50 WIDTH ...RRIAGEWAY'"
    },
    {
      "label": "Slab offset",
      "value": "3500",
      "unit": "",
      "appliesTo": "SLAB centerline dimension"
    },
    {
      "label": "Span square length",
      "value": "40000",
      "unit": "",
      "appliesTo": "A1 to P1, (SQ)"
    },
    {
      "label": "Span skew length",
      "value": "46189",
      "unit": "",
      "appliesTo": "A1 to P1, (SK)"
    },
    {
      "label": "Span square length (inner)",
      "value": "37761",
      "unit": "",
      "appliesTo": "between A1 and P1, (SQ)"
    },
    {
      "label": "Span skew length (inner)",
      "value": "43603",
      "unit": "",
      "appliesTo": "between A1 and P1, (SK)"
    },
    {
      "label": "Offset square",
      "value": "1070",
      "unit": "",
      "appliesTo": "near A1, (SQ)"
    },
    {
      "label": "Offset skew",
      "value": "1236",
      "unit": "",
      "appliesTo": "near A1, (SK)"
    },
    {
      "label": "Offset square",
      "value": "1170",
      "unit": "",
      "appliesTo": "near P1, (SQ)"
    },
    {
      "label": "Offset skew",
      "value": "1350",
      "unit": "",
      "appliesTo": "near P1, (SK)"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "TYP. spacing of deck markers/joints"
    }
  ],
  "notes": [
    "TO DEWAS",
    "C OF EXP. JOINT",
    "RCC CRASH BARRIER",
    "5000 (TYP.)",
    "FOOTPATH",
    "C BRIDGE (RIGHT SIDE)"
  ],
  "labels": [
    "A1",
    "P1",
    "SLAB",
    "40000",
    "450",
    "100",
    "1500",
    "3500",
    "40000(SQ)",
    "46189(SK)",
    "37761(SQ)",
    "43603(SK)",
    "1070(SQ)",
    "1236(SK)",
    "1170(SQ)",
    "1350(SK)",
    "5000 (TYP.)"
  ],
  "description": "This crop shows a plan view of a bridge deck between abutment A1 and pier P1, including centerline dimensions along the skew and square directions, an expansion joint centerline at A1, footpath and carriageway widths, an RCC crash barrier along the deck edge, and a landscaped fan-shaped area with tree symbols near the abutment approach. Small square symbols spaced at 5000 units (TYP.) along the deck likely represent drainage spouts or joint markers. The label 'TO DEWAS' with an arrow indicates the direction of the roadway alignment at the top left of the drawing."
}

p01_r04 half plan showing deck levelPlan

  • Footpath×1rectangularwidth 1500 shown with hatching pattern

40000 Overall width450 Footpath offset100 Gap dimension1500 Footpath width450 Carriageway width3500 Slab offset40000 Span square length46189 Span skew length+7 more

crop

p01_r05 half plan showing deck level

page 1 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p01_r05_half_plan_showing_deck_level
Original
p01_r05 half plan showing deck level
{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "rectangular, skewed alignment",
      "material": "reinforced concrete",
      "count": 1,
      "note": "marked with detail bubble A1 at centerline of expansion joint"
    },
    {
      "name": "Approach Slab",
      "tag": "",
      "shape": "rectangular, skewed",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one each for right and left carriageway"
    },
    {
      "name": "Expansion Joint",
      "tag": "",
      "shape": "linear, skewed",
      "material": "",
      "count": 1,
      "note": "centerline shown at abutment A1, dimensions 1070(SQ)/1236(SK)"
    },
    {
      "name": "RCC Crash Barrier",
      "tag": "",
      "shape": "linear, rectangular section",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one along median edge, one along outer edge; callout leader shown"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 2,
      "note": "1500mm wide footpaths on outer edges of both carriageways"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "centerline of median between two carriageways, width 2900"
    },
    {
      "name": "Drainage Inlet / Scupper",
      "tag": "",
      "shape": "small square symbol",
      "material": "",
      "count": 10,
      "note": "repeated small square symbols along carriageway edges, likely drainage spouts/scuppers"
    },
    {
      "name": "Trees/Vegetation",
      "tag": "",
      "shape": "irregular clusters",
      "material": "",
      "count": null,
      "note": "shown symbolically at both approach ends, not a constructional item but indicates existing ground/landscape"
    },
    {
      "name": "Expansion Joint Marks (Small triangular symbols)",
      "tag": "",
      "shape": "triangular symbols in a row",
      "material": "",
      "count": 7,
      "note": "repeated symbols along top edge of carriageway, likely joint or marker locations"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "mm",
      "appliesTo": "cross-section width, both sides"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "Footpath"
    },
    {
      "label": "Kerb/edge strip",
      "value": "100",
      "unit": "mm",
      "appliesTo": "edge strip adjacent to footpath"
    },
    {
      "label": "Crash barrier offset",
      "value": "450",
      "unit": "mm",
      "appliesTo": "RCC Crash Barrier position, repeated multiple locations"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "mm",
      "appliesTo": "Carriageway (right and left)"
    },
    {
      "label": "Bridge width (right/left)",
      "value": "16550",
      "unit": "mm",
      "appliesTo": "Bridge width, right and left side"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "mm",
      "appliesTo": "Median"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "mm",
      "appliesTo": "Approach Slab, both sides"
    },
    {
      "label": "Expansion joint offset (square)",
      "value": "1070",
      "unit": "mm",
      "appliesTo": "Expansion Joint (SQ)"
    },
    {
      "label": "Expansion joint offset (skew)",
      "value": "1236",
      "unit": "mm",
      "appliesTo": "Expansion Joint (SK)"
    },
    {
      "label": "Overall dimension (square)",
      "value": "40000",
      "unit": "mm",
      "appliesTo": "overall plan dimension SQ"
    },
    {
      "label": "Overall dimension (skew)",
      "value": "46189",
      "unit": "mm",
      "appliesTo": "overall plan dimension SK"
    },
    {
      "label": "Secondary overall dimension (square)",
      "value": "37761",
      "unit": "mm",
      "appliesTo": "secondary plan dimension SQ"
    },
    {
      "label": "Secondary overall dimension (skew)",
      "value": "43603",
      "unit": "mm",
      "appliesTo": "secondary plan dimension SK"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "mm",
      "appliesTo": "repeated spacing marks along carriageway (TYP.)"
    }
  ],
  "notes": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "5000 (TYP.)",
    "RCC CRA... (truncated, likely 'RCC CRASH BARRIER')",
    "RCC CRASH BARRIER"
  ],
  "labels": [
    "A1",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)",
    "C BRIDGE (LEFT SIDE)",
    "C OF MEDIAN",
    "APPROACH SLAB",
    "FOOTPATH",
    "16550 WIDTH",
    "13500 CARRIAGEWAY"
  ],
  "description": "This crop shows a plan view of a bridge deck and its approach slabs at abutment A1, including dimensions for carriageway widths, footpaths, median, and expansion joint offsets for both square (SQ) and skew (SK) alignments. It also shows RCC crash barriers along both carriageways and directional labels indicating traffic flow toward Dewas and Pikaradiya. The drawing is a fragment of a larger bridge general arrangement plan, focusing on one end (abutment A1) with symbolic tree/vegetation representation at both approach ends."
}

p01_r05 half plan showing deck levelPlan

  • Footpath×2linear strip1500mm wide footpaths on outer edges of both carriageways

40000 mm Overall width1500 mm Footpath width100 mm Kerb/edge strip450 mm Crash barrier offset13500 mm Carriageway width16550 mm Bridge width (right/left)2900 mm Median width3500 mm Approach slab length+7 more

Page 3

crop

p03_r01

page 3 · abutment_deck_cross_section_p03_r01
Original
p03_r01
{
  "view": "Cross Section",
  "objects": [
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "tapered/rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one at each outer edge of deck"
    },
    {
      "name": "footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "located between crash barrier and carriageway on each side"
    },
    {
      "name": "RCC cast-in-situ deck slab",
      "tag": "",
      "shape": "slab with 2.5% cross slope",
      "material": "reinforced concrete",
      "count": 1,
      "note": "spans full width, shown with wearing course on top"
    },
    {
      "name": "wearing course",
      "tag": "",
      "shape": "layer, 50mm thick",
      "material": "asphalt/bituminous (WC)",
      "count": 1,
      "note": "50mm THK. WC over deck, both carriageways"
    },
    {
      "name": "cantilever median wall",
      "tag": "",
      "shape": "rectangular, cantilevered",
      "material": "concrete",
      "count": 1,
      "note": "located at centerline of proposed road, between the two carriageways"
    },
    {
      "name": "expansion/sealant gap",
      "tag": "",
      "shape": "20mm gap",
      "material": "polysulphide sealant",
      "count": 1,
      "note": "20mm gap filled with polysulphide sealant, near median"
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one under each abutment (A1 side and A2 side), width 16550 each"
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "square/circular in plan (shown as dashed boxes with cross symbol)",
      "material": "reinforced concrete (cast-in-situ, presumed)",
      "count": null,
      "note": "multiple piles shown in a row under each pile cap; exact count not clearly determinable due to symbol overlap, appears as repeating pattern of 5 positions per cap"
    },
    {
      "name": "PCC blinding/leveling layer",
      "tag": "PCC M-15",
      "shape": "layer",
      "material": "PCC M-15",
      "count": 1,
      "note": "below pile cap, labeled PCC M-15"
    },
    {
      "name": "embankment/slope fill",
      "tag": "",
      "shape": "sloped fill (2:1 shown as 1/2)",
      "material": "earth fill (implied)",
      "count": 2,
      "note": "shown schematically as hatched slope lines beyond ROW on both sides"
    }
  ],
  "measurements": [
    {
      "label": "ROW total width",
      "value": "80000",
      "unit": "",
      "appliesTo": "overall right-of-way"
    },
    {
      "label": "ROW half width",
      "value": "40000",
      "unit": "",
      "appliesTo": "each side of centerline"
    },
    {
      "label": "Deck half width",
      "value": "16550",
      "unit": "",
      "appliesTo": "deck/pile cap width each side"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "each carriageway (LHS and RHS)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "footpath each side"
    },
    {
      "label": "Crash barrier width",
      "value": "450",
      "unit": "",
      "appliesTo": "crash barrier each side"
    },
    {
      "label": "Edge offset",
      "value": "450",
      "unit": "",
      "appliesTo": "between crash barrier and footpath/deck edge"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "",
      "appliesTo": "centerline gap between carriageways"
    },
    {
      "label": "FRL offset",
      "value": "100",
      "unit": "",
      "appliesTo": "FRL marks near median"
    },
    {
      "label": "Wearing course thickness",
      "value": "50",
      "unit": "mm",
      "appliesTo": "WC layer on deck"
    },
    {
      "label": "Deck cross slope",
      "value": "2.5",
      "unit": "%",
      "appliesTo": "deck slab slope"
    },
    {
      "label": "Sealant gap width",
      "value": "20",
      "unit": "mm",
      "appliesTo": "gap at median, polysulphide sealant"
    },
    {
      "label": "Pile cap depth reference",
      "value": "1000",
      "unit": "",
      "appliesTo": "vertical dimension near pile cap top"
    },
    {
      "label": "Pile spacing pattern",
      "value": "1275 / 3500 / 3500 / 3500 / 3500 / 1275",
      "unit": "",
      "appliesTo": "spacing across deck section (upper girder/beam grid)"
    },
    {
      "label": "Pile cap plan spacing",
      "value": "775 / 3750 / 3750 / 3750 / 3750 / 775",
      "unit": "",
      "appliesTo": "pile cap width breakdown, each abutment"
    },
    {
      "label": "ACTL A1 L/S",
      "value": "514.674",
      "unit": "",
      "appliesTo": "Abutment cap top level, A1 left side"
    },
    {
      "label": "ACTL A2 L/S",
      "value": "516.136",
      "unit": "",
      "appliesTo": "Abutment cap top level, A2 left side"
    },
    {
      "label": "ACTL A1 R/S",
      "value": "514.839",
      "unit": "",
      "appliesTo": "Abutment cap top level, A1 right side"
    },
    {
      "label": "ACTL A2 R/S",
      "value": "516.318",
      "unit": "",
      "appliesTo": "Abutment cap top level, A2 right side"
    },
    {
      "label": "PCTL A1 L/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level, A1 left side"
    },
    {
      "label": "PCTL A2 L/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level, A2 left side"
    },
    {
      "label": "PCTL A1 R/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level, A1 right side"
    },
    {
      "label": "PCTL A2 R/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level, A2 right side"
    },
    {
      "label": "PCBL A1 L/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A1 left side"
    },
    {
      "label": "PCBL A2 L/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A2 left side"
    },
    {
      "label": "PCBL A1 R/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A1 right side"
    },
    {
      "label": "PCBL A2 R/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A2 right side"
    },
    {
      "label": "PILE TIP LVL A1 L/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile tip level, A1 left side"
    },
    {
      "label": "PILE TIP LVL A2 L/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile tip level, A2 left side"
    },
    {
      "label": "PILE TIP LVL A1 R/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile tip level, A1 right side"
    },
    {
      "label": "PILE TIP LVL A2 R/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile tip level, A2 right side"
    },
    {
      "label": "Slope symbol",
      "value": "2:1",
      "unit": "",
      "appliesTo": "embankment slope, both sides"
    },
    {
      "label": "Scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "Section at Abutment Location at A1 & A2"
    }
  ],
  "notes": [
    "50mm THK. (WC)",
    "RCC CAST IN SITU DECK SLOPE 2.5%",
    "20mm GAP FILLED WITH POLYSULPHIDE SEALANT",
    "CANTILEVER MEDIAN WALL",
    "PCC M-15"
  ],
  "labels": [
    "SECTION AT ABUTMENT LOCATION AT A1 & A2",
    "(SCALE 1:150)",
    "ROW",
    "€ OF PROPOSED ROAD",
    "€ OF LHS (CARRIAGEWAY)",
    "€ OF RHS (CARRIAGEWAY)",
    "FRL",
    "RCC CRASH BARRIER",
    "FOOTPATH"
  ],
  "description": "This crop is a cross section of a bridge deck taken at the abutment locations A1 and A2, showing the full 80m right-of-way with two carriageways, footpaths, crash barriers, a central cantilever median wall, and the deck slab with wearing course and cross slope. Below the deck, the section shows the pile cap layout with rows of piles under each abutment along with reference elevations (ACTL, PCTL, PCBL, pile tip levels) for both the A1 and A2 abutments, left and right sides. It is primarily a substructure/superstructure combined cross section documenting deck geometry, pile cap dimensions, and key design elevations rather than a single component detail."
}

p03_r01Cross Section

  • footpath×2rectangularlocated between crash barrier and carriageway on each side

80000 ROW total width40000 ROW half width16550 Deck half width13500 Carriageway width1500 Footpath width450 Crash barrier width450 Edge offset2900 Median width+25 more

crop

p03_r01 cross section of deck footpath crash barrier and pile cap at abutment

page 3 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p03_r01_cross_section_of_deck_footpath_crash_barrier_and_pile_cap_at_abutment
Original
p03_r01 cross section of deck footpath crash barrier and pile cap at abutment
{
  "view": "Cross Section",
  "objects": [
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "tapered/trapezoidal",
      "material": "reinforced concrete",
      "count": 4,
      "note": "Two outer barriers on each carriageway edge, slope 2:1 shown"
    },
    {
      "name": "Cantilever median wall",
      "tag": "",
      "shape": "rectangular/tapered",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at centre gap between the two carriageways, with 20mm gap filled with polysulphide sealant"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete (implied)",
      "count": 2,
      "note": "1500mm wide footpath on each outer edge"
    },
    {
      "name": "RCC cast-in-situ deck slab",
      "tag": "",
      "shape": "slab, cambered/sloped",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One per carriageway, slope 2.5% shown, 100mm deck thickness noted at crown"
    },
    {
      "name": "Wearing coat",
      "tag": "",
      "shape": "layer",
      "material": "asphalt/wearing course (WC)",
      "count": 2,
      "note": "50mm thick wearing coat over deck slab, one per carriageway"
    },
    {
      "name": "Girder/bearing line",
      "tag": "",
      "shape": "symbolic marks under deck",
      "material": "",
      "count": 10,
      "note": "5 support/bearing marks per carriageway at 3500mm spacing (1275+3500x4+1275=16550); likely PSC girder positions, not explicitly labelled"
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular (dashed outline)",
      "material": "reinforced concrete",
      "count": 10,
      "note": "5 pile cap groups per carriageway side spaced at 3750mm c/c, 775mm edge distance, total width 16550mm; levels PCTL and PCBL given"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular (shown as cross symbols in group)",
      "material": "reinforced concrete",
      "count": null,
      "note": "Groups of piles shown under each pile cap; exact count per cap not clearly countable from symbols, spacing 1000mm shown"
    },
    {
      "name": "PCC blinding/leveling course",
      "tag": "M-15",
      "shape": "layer",
      "material": "plain cement concrete (M-15 grade)",
      "count": 1,
      "note": "Shown at median/cantilever wall foundation area"
    },
    {
      "name": "Embankment / slope protection",
      "tag": "",
      "shape": "sloped, riprap hatch pattern",
      "material": "stone/rock pitching (implied)",
      "count": 2,
      "note": "Shown on both outer sides beyond ROW line, sloped embankment with rock protection"
    }
  ],
  "measurements": [
    {
      "label": "Total ROW width",
      "value": "80000",
      "unit": "",
      "appliesTo": "overall section"
    },
    {
      "label": "Half ROW width",
      "value": "40000",
      "unit": "",
      "appliesTo": "each side"
    },
    {
      "label": "Deck width",
      "value": "16550",
      "unit": "",
      "appliesTo": "each carriageway deck (top)"
    },
    {
      "label": "Deck width (bottom/pile cap)",
      "value": "16550",
      "unit": "",
      "appliesTo": "pile cap group width"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "FOOTPATH"
    },
    {
      "label": "Edge offset",
      "value": "450",
      "unit": "",
      "appliesTo": "barrier/footpath edge, repeated multiple locations"
    },
    {
      "label": "Deck thickness at crown",
      "value": "100",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Median gap width",
      "value": "2900",
      "unit": "",
      "appliesTo": "gap between carriageways at centre"
    },
    {
      "label": "Wearing coat thickness",
      "value": "50mm",
      "unit": "mm",
      "appliesTo": "WC layer"
    },
    {
      "label": "Deck slope",
      "value": "2.5",
      "unit": "%",
      "appliesTo": "RCC cast in situ deck"
    },
    {
      "label": "Girder/bearing spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "spacing marks near crown"
    },
    {
      "label": "Bearing/girder line spacing",
      "value": "1275",
      "unit": "",
      "appliesTo": "outer spacing"
    },
    {
      "label": "Bearing/girder line spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "repeated 4 times per side"
    },
    {
      "label": "Pile spacing",
      "value": "1000",
      "unit": "",
      "appliesTo": "pile group spacing, multiple locations"
    },
    {
      "label": "Gap fill thickness",
      "value": "20mm",
      "unit": "mm",
      "appliesTo": "polysulphide sealant gap at median"
    },
    {
      "label": "Pile cap spacing",
      "value": "3750",
      "unit": "",
      "appliesTo": "pile cap centers, repeated 4 times per side"
    },
    {
      "label": "Pile cap edge distance",
      "value": "775",
      "unit": "",
      "appliesTo": "pile cap outer edge"
    },
    {
      "label": "ACTL A1 L/S",
      "value": "514.674",
      "unit": "",
      "appliesTo": "Abutment cap top level A1 left side"
    },
    {
      "label": "ACTL A2 L/S",
      "value": "516.136",
      "unit": "",
      "appliesTo": "Abutment cap top level A2 left side"
    },
    {
      "label": "ACTL A1 R/S",
      "value": "514.839",
      "unit": "",
      "appliesTo": "Abutment cap top level A1 right side"
    },
    {
      "label": "ACTL A2 R/S",
      "value": "516.318",
      "unit": "",
      "appliesTo": "Abutment cap top level A2 right side"
    },
    {
      "label": "PCTL A1 L/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level A1 left side"
    },
    {
      "label": "PCTL A2 L/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level A2 left side"
    },
    {
      "label": "PCTL A1 R/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level A1 right side"
    },
    {
      "label": "PCTL A2 R/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level A2 right side"
    },
    {
      "label": "PCBL A1 L/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level A1 left side"
    },
    {
      "label": "PCBL A2 L/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level A2 left side"
    },
    {
      "label": "PCBL A1 R/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level A1 right side"
    },
    {
      "label": "PCBL A2 R/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level A2 right side"
    },
    {
      "label": "Pile tip level A1 L/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile A1 left side"
    },
    {
      "label": "Pile tip level A2 L/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile A2 left side"
    },
    {
      "label": "Pile tip level A1 R/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile A1 right side"
    },
    {
      "label": "Pile tip level A2 R/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile A2 right side"
    },
    {
      "label": "Scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "section drawing"
    }
  ],
  "notes": [
    "50mm THK. (WC)",
    "RCC CAST IN SITU DECK SLOPE 2.5%",
    "RCC CRASH BARRIER",
    "20mm GAP FILLED WITH POLYSULPHIDE SEALANT",
    "CANTILEVER MEDIAN WALL",
    "PCC M-15"
  ],
  "labels": [
    "SECTION AT ABUTMENT LOCATION AT A1 & A2",
    "(SCALE 1:150)",
    "80000 ROW",
    "C OF PROPOSED ROAD",
    "C OF LHS (CARRIAGEWAY)",
    "C OF RHS (CARRIAGEWAY)",
    "FRL",
    "FOOTPATH",
    "ROW",
    "A",
    "B"
  ],
  "description": "This crop shows a full cross section titled 'SECTION AT ABUTMENT LOCATION AT A1 & A2' (scale 1:150) through a dual-carriageway bridge, depicting both carriageways, footpaths, RCC crash barriers, a cantilever median wall with sealed gap, cast-in-situ RCC deck slabs with wearing coat, girder/bearing lines, and the abutment pile caps with pile groups below embankment level on both sides. Numerous elevation levels (ACTL, PCTL, PCBL, pile tip levels) for abutments A1 and A2 on left and right sides (L/S, R/S) are annotated, along with detailed dimensions of carriageway, footpath, girder spacing, and pile cap layout. A second section (marked 'B') begins to appear at the bottom edge of the crop but is cut off."
}

p03_r01 cross section of deck footpath crash barrier and pile cap at abutmentCross Section

  • Footpath×2rectangularreinforced concrete (implied)1500mm wide footpath on each outer edge

80000 Total ROW width40000 Half ROW width16550 Deck width16550 Deck width (bottom/pile cap)13500 Carriageway width1500 Footpath width450 Edge offset100 Deck thickness at crown+27 more

crop

p03_r02 cross section of deck and pile cap at pier p1

page 3 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p03_r02_cross_section_of_deck_and_pile_cap_at_pier_p1
Original
p03_r02 cross section of deck and pile cap at pier p1
{
  "view": "Cross Section",
  "objects": [
    {
      "name": "Deck slab (RCC cast in situ)",
      "tag": "",
      "shape": "slab, cambered/tapered top",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One deck shown for each carriageway (L/S and R/S), separated by median gap at CL of proposed road"
    },
    {
      "name": "Wearing course",
      "tag": "WC",
      "shape": "layer, sloped 2.5%",
      "material": "bituminous/asphalt (implied)",
      "count": 2,
      "note": "50mm thick, shown over deck slab each side"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "tapered rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "At outer edges of each carriageway"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "1500mm wide footpath each side, between carriageway and crash barrier"
    },
    {
      "name": "Pier cap / pile cap top and bottom levels (PCTL/PCBL)",
      "tag": "P1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown for L/S and R/S of Pier P1; levels marked PCTL and PCBL"
    },
    {
      "name": "Pier columns/webs (square)",
      "tag": "",
      "shape": "square (SQ) columns",
      "material": "reinforced concrete",
      "count": 10,
      "note": "Dimensioned as 1275(SQ) and 3500(SQ) sections spanning 16550mm width, per pier row, two rows shown (L/S & R/S)"
    },
    {
      "name": "Piles",
      "tag": "P1",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 10,
      "note": "Shown below pile cap, 5 piles per side (L/S and R/S), spaced at 3000mm typical with 775mm end offsets"
    },
    {
      "name": "Abutment section (partial, cropped)",
      "tag": "A1 & A2",
      "shape": "not fully visible",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Only top dimension line (775-16550-775) and pile tip levels visible; main section body cropped out of view above"
    }
  ],
  "measurements": [
    {
      "label": "Width dimension",
      "value": "775",
      "unit": "mm",
      "appliesTo": "Abutment section (partial, top)"
    },
    {
      "label": "Width dimension",
      "value": "16550",
      "unit": "mm",
      "appliesTo": "Abutment section / Pier section overall width"
    },
    {
      "label": "Width dimension",
      "value": "775",
      "unit": "mm",
      "appliesTo": "Abutment section (partial, top)"
    },
    {
      "label": "Pile tip level",
      "value": "481.905",
      "unit": "",
      "appliesTo": "A1 L/S"
    },
    {
      "label": "Pile tip level",
      "value": "484.641",
      "unit": "",
      "appliesTo": "A2 L/S"
    },
    {
      "label": "Pile tip level",
      "value": "481.905",
      "unit": "",
      "appliesTo": "A1 R/S"
    },
    {
      "label": "Pile tip level",
      "value": "484.641",
      "unit": "",
      "appliesTo": "A2 R/S"
    },
    {
      "label": "Scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "Section at Abutment Location at A1 & A2"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "mm",
      "appliesTo": "LHS carriageway"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "mm",
      "appliesTo": "RHS carriageway"
    },
    {
      "label": "Median/gap dimension",
      "value": "2900",
      "unit": "mm",
      "appliesTo": "CL of proposed road gap between carriageways"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "Footpath (each side)"
    },
    {
      "label": "Crash barrier/edge dimension",
      "value": "450",
      "unit": "mm",
      "appliesTo": "Crash barrier / edge strip"
    },
    {
      "label": "Deck edge dimension",
      "value": "100",
      "unit": "mm",
      "appliesTo": "Deck edge thickness/step"
    },
    {
      "label": "Wearing course thickness",
      "value": "50",
      "unit": "mm",
      "appliesTo": "RCC cast in situ deck WC layer"
    },
    {
      "label": "Slope",
      "value": "2.5",
      "unit": "%",
      "appliesTo": "Deck cross slope"
    },
    {
      "label": "Dimension",
      "value": "750",
      "unit": "mm",
      "appliesTo": "Deck/girder detail near crash barrier"
    },
    {
      "label": "Overall width",
      "value": "16550",
      "unit": "mm",
      "appliesTo": "Pier cap/pile cap width"
    },
    {
      "label": "Column/pier width",
      "value": "1275",
      "unit": "mm",
      "appliesTo": "Pier column (SQ) end segment"
    },
    {
      "label": "Column/pier width",
      "value": "3500",
      "unit": "mm",
      "appliesTo": "Pier column (SQ) segments (x4)"
    },
    {
      "label": "Spacing dimension",
      "value": "1000",
      "unit": "mm",
      "appliesTo": "Pile/pier spacing end offset"
    },
    {
      "label": "Spacing dimension",
      "value": "4500",
      "unit": "mm",
      "appliesTo": "Pile/pier spacing (x2)"
    },
    {
      "label": "Pier cap top level",
      "value": "515.384",
      "unit": "",
      "appliesTo": "PCTL P1 L/S"
    },
    {
      "label": "Pier cap top level",
      "value": "515.567",
      "unit": "",
      "appliesTo": "PCTL A2 R/S (as printed)"
    },
    {
      "label": "Level",
      "value": "503.316",
      "unit": "",
      "appliesTo": "PCTL P1 L/S (as printed)"
    },
    {
      "label": "Level",
      "value": "503.316",
      "unit": "",
      "appliesTo": "PCTL P1 R/S (as printed)"
    },
    {
      "label": "Pile cap bottom level",
      "value": "501.516",
      "unit": "",
      "appliesTo": "PCBL P1 L/S"
    },
    {
      "label": "Pile cap bottom level",
      "value": "501.516",
      "unit": "",
      "appliesTo": "PCBL P1 R/S"
    },
    {
      "label": "Pile tip level",
      "value": "476.566",
      "unit": "",
      "appliesTo": "Pile P1 L/S"
    },
    {
      "label": "Pile tip level",
      "value": "476.566",
      "unit": "",
      "appliesTo": "Pile P1 R/S"
    },
    {
      "label": "Pile spacing",
      "value": "3000",
      "unit": "mm",
      "appliesTo": "Piles under P1 (x4 spacings each side)"
    },
    {
      "label": "End offset",
      "value": "775",
      "unit": "mm",
      "appliesTo": "Pile group end offset each side"
    },
    {
      "label": "Overall width",
      "value": "16550",
      "unit": "mm",
      "appliesTo": "Pile group total width"
    },
    {
      "label": "Scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "Section at Pier Location"
    }
  ],
  "notes": [
    "READ THIS DRAWING IN CONJUNCTION WITH OTHER SHEETS OF THE SAME DRAWING NUMBER"
  ],
  "labels": [
    "SECTION AT ABUTMENT LOCATION AT A1 & A2",
    "SECTION AT PIER LOCATION",
    "CL OF PROPOSED ROAD",
    "CL OF LHS (CARRIAGEWAY)",
    "CL OF RHS (CARRIAGEWAY)",
    "FRL",
    "FOOTPATH",
    "RCC CRASH BARRIER",
    "RCC CAST IN SITU DECK",
    "50mm THK. (WC)",
    "NOTES:",
    "DESIGN CONSULTANT: LEA ASSOCIATES SOUTH ASIA PVT. LTD.",
    "B-1, E-27, IInd FLOOR, MOHAN COOPERATIVE INDUSTRIAL ESTATE, MATHURA ROAD, NEW DELHI-110044",
    "CLIENT: NATIONAL HIGHWAYS AUTHORITY OF INDIA (Ministry of Road Transport & Highways) Government of India",
    "DRAWING TITLE: GENERAL ARRANGEMENT DRAWING FOR MAJOR BRIDGE AT CH. 64+412",
    "DRG. NO.: 73580A\\LASA\\STR\\MJBR5\\GA-01",
    "REV: R0",
    "SCALE: AS SHOWN",
    "DATE: DEC.2025",
    "DRAWN: KUNAL",
    "PROJECT: DEVELOPMENT OF 6 LANE GREENFIELD ACCESS CONTROLLED INDORE EASTERN BYPASS STARTING FROM DESIGN KM 64+... (partial, cut off)"
  ],
  "description": "This crop shows two typical cross sections of a major bridge: an abutment section at A1 & A2 (mostly cropped out, only the top dimension line 775-16550-775 and pile tip levels remain visible) and a fully detailed pier section (Section at Pier Location) showing twin carriageways with footpaths, RCC crash barriers, RCC cast-in-situ deck with 50mm wearing course sloped at 2.5%, pier cap (PCTL/PCBL) levels, square pier columns, and a group of circular piles with pile tip levels for Pier P1 on both L/S and R/S. The bottom title block identifies this as part of the General Arrangement Drawing for a major bridge at Ch. 64+412, prepared by LEA Associates South Asia for NHAI, Drawing No. 73580A\\LASA\\STR\\MJBR5\\GA-01, Rev R0."
}

p03_r02 cross section of deck and pile cap at pier p1Cross Section

  • Footpath×2rectangular strip1500mm wide footpath each side, between carriageway and crash barrier

775 mm Width dimension16550 mm Width dimension775 mm Width dimension481.905 Pile tip level484.641 Pile tip level481.905 Pile tip level484.641 Pile tip level1:150 Scale+26 more