Drawing → BOQ
← Mindmapwhat the drawings said

Median

1 page · 5 crops · ×5 · pavement

Matched toBridge Medianbridge.superstructure.deck_system.medianon “Median”

1 read off the drawings · 2 not established
The class asks forValueHowFrom
LengthLwants m/mmnot establishedThe median is shown only as a centerline (C/L OF MEDIAN) with a width callout; no explicit length dimension is given for the median strip, and inferring it equals the full bridge span length would be an assumption not directly supported by a stated dimension for the median object itself.not found
WidthWwants m/mm2900 mmDirectly read as 'Median width' / 'C/L OF MEDIAN spacing' = 2900, consistently repeated across all five crops (bridge_deck_and_approach_slab_p01_r05, deck_p01_r03, structural_drawings_pkg_1_..._r03, structural_drawings_pkg_1_..._r05).Every crop that shows the median labels its centerline spacing/width as 2900, explicitly tied to 'C/L OF MEDIAN' and 'Median width', making this a direct, unambiguous reading of the median's own dimension.readp1 · p01_r05p1 · p01_r03p1 · p01_r03 half plan of bridge deck with crash barriersp1 · p01_r05 half plan showing deck level
HeightHwants m/mmnot establishedThe median is documented only in plan view across all crops; no elevation, section, or height/thickness callout for the median is present in any reading, so height cannot be read or derived.not found

Worked out by anthropic/claude-sonnet-5 from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

How the sheets named it

Median/paved shoulder area

Every dimension read for it1

  • 2900 mmMedian widthp1 · p01_r05 half plan showing deck level

Notes on the sheets that carry it

  • p1RCC CRASH BARRIER
  • p1APPROACH SLAB
  • p1C/L OF EXP. JOINT
  • p1C/L OF MEDIAN
  • p1C/L BRIDGE (RIGHT SIDE)
  • p1C/L BRIDGE (LEFT SIDE)
  • p1HALF PLAN SHOWING DECK LEVEL
  • p1HALF PLAN SHOWING FOUNDATION LEVEL
  • p1(SCALE 1:300)
  • p130° SKEW
  • p15000 (TYP.)
  • p1TO DEWAS
  • p1TO PIKARADIYA
  • p1HALF PLAN SHOWI[NG...] (text cut off)
  • p1HALF PLAN SHOWING DECK LEVEL (SCALE 1:300)
  • p1RCC CRA... (truncated, likely 'RCC CRASH BARRIER')

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r05

page 1 · bridge_deck_and_approach_slab_p01_r05
Original
p01_r05
{
  "view": "Plan",
  "objects": [
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular (skewed/angled)",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One shown on each carriageway (left and right), abutting the abutment/expansion joint line, skewed relative to carriageway"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear, rectangular in section",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Runs along both edges of carriageway; small square/rectangular markers along its length possibly denoting posts or joints"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "1500mm wide strip on either outer edge of carriageway"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "Centerline of median (C/L OF MEDIAN) separating the two carriageways, 2900 wide"
    },
    {
      "name": "Expansion joint",
      "tag": "A1",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "C/L of expansion joint marked at top, aligned with grid/section marker A1"
    },
    {
      "name": "Carriageway",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "13500 wide carriageway on each side (right side and left side of bridge)"
    },
    {
      "name": "Drainage/scupper symbols (small hatched squares)",
      "tag": "",
      "shape": "small square",
      "material": "",
      "count": 16,
      "note": "Repeated small square symbols along the crash barrier/approach slab edges, likely drainage spouts or expansion joint markers, spaced at 5000 (TYP.) intervals"
    },
    {
      "name": "Tree/landscaping symbols",
      "tag": "",
      "shape": "irregular circular clusters",
      "material": "",
      "count": null,
      "note": "Decorative planting symbols shown in the splayed embankment/wing areas at both ends of the plan, not a constructional item but shown for context"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "total bridge width (top and bottom)"
    },
    {
      "label": "Carriageway width",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH CARRIAGEWAY (right and left)"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY (right and left)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "FOOTPATH (both sides)"
    },
    {
      "label": "Barrier/edge offset",
      "value": "450",
      "unit": "",
      "appliesTo": "edge strip dimension, repeated at multiple locations"
    },
    {
      "label": "Offset",
      "value": "100",
      "unit": "",
      "appliesTo": "small edge strip dimension, repeated"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "",
      "appliesTo": "C/L OF MEDIAN spacing"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "",
      "appliesTo": "APPROACH SLAB (both left and right)"
    },
    {
      "label": "Barrier/marker spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "typical spacing of RCC crash barrier markers (TYP.)"
    },
    {
      "label": "Square dimension",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "unlabeled dimension near C/L of exp. joint"
    },
    {
      "label": "Skew dimension",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "unlabeled dimension near C/L of exp. joint"
    },
    {
      "label": "Square dimension",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "overall length square measurement"
    },
    {
      "label": "Skew dimension",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "overall length skew measurement"
    },
    {
      "label": "Square dimension",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "secondary length square measurement"
    },
    {
      "label": "Skew dimension",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "secondary length skew measurement"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "APPROACH SLAB",
    "C/L OF EXP. JOINT",
    "C/L OF MEDIAN",
    "C/L BRIDGE (RIGHT SIDE)",
    "C/L BRIDGE (LEFT SIDE)"
  ],
  "labels": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "A1",
    "FOOTPATH",
    "CARRIAGEWAY",
    "WIDTH CARRIAGEWAY",
    "RCC CRASH BARRIER",
    "5000 (TYP.)"
  ],
  "description": "This crop is a plan view of a bridge approach layout showing two carriageways (right side going to Dewas, left side/return to Pikaradiya) separated by a median, with footpaths, RCC crash barriers, and skewed approach slabs at the abutment/expansion joint line marked A1. Dimensions define overall width (40000), carriageway widths (16550/13500), footpath (1500), median (2900), approach slab length (3500), and barrier marker spacing (5000 TYP.), along with square and skew length callouts for the bridge. Decorative tree symbols indicate embankment/landscaped areas at both ends but are not structural elements documented in detail here."
}

p01_r05Plan

  • Median×1linear stripCenterline of median (C/L OF MEDIAN) separating the two carriageways, 2900 wide

40000 Overall width16550 Carriageway width13500 Carriageway width1500 Footpath width450 Barrier/edge offset100 Offset2900 Median width3500 Approach slab length+7 more

crop

p01_r09

page 1 · bridge_deck_and_foundation_layout_p01_r09
Original
p01_r09
{
  "view": "Plan",
  "objects": [
    {
      "name": "Pier/Pier cap",
      "tag": "P1",
      "shape": "skewed rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "marked at top left, deck level plan side"
    },
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "skewed rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "marked at top right with centerline of expansion joint noted"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "runs along both edges of deck in deck-level half plan"
    },
    {
      "name": "Pile / foundation element",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 18,
      "note": "shown as circles in foundation-level half plan, arranged in skewed grid rows"
    },
    {
      "name": "Deck slab girders/beams (shown as parallel lines)",
      "tag": "",
      "shape": "rectangular/tapered",
      "material": "reinforced concrete",
      "count": null,
      "note": "multiple parallel lines representing girder layout in deck-level plan"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "centerline of expansion joint noted near A1"
    },
    {
      "name": "Median/paved shoulder area",
      "tag": "",
      "shape": "trapezoidal",
      "material": "",
      "count": 1,
      "note": "partial label 'MEDI...P...' visible near right side, likely median or paved shoulder"
    },
    {
      "name": "Drainage/scupper symbols",
      "tag": "",
      "shape": "small square/diamond",
      "material": "",
      "count": 6,
      "note": "symbols along bottom edge of deck-level plan, possibly weep holes or drain spouts"
    }
  ],
  "measurements": [
    {
      "label": "Overall span (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "deck plan, P1 to A1"
    },
    {
      "label": "Overall span (skew)",
      "value": "46189",
      "unit": "",
      "appliesTo": "deck plan, P1 to A1"
    },
    {
      "label": "Offset at P1 (square)",
      "value": "1170",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Offset at P1 (skew)",
      "value": "1350",
      "unit": "",
      "appliesTo": "P1"
    },
    {
      "label": "Girder spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "deck level plan, repeated 4 times"
    },
    {
      "label": "Total width (deck level)",
      "value": "16550",
      "unit": "",
      "appliesTo": "deck level plan cross dimension"
    },
    {
      "label": "Offset (square) top",
      "value": "1275",
      "unit": "",
      "appliesTo": "deck level plan edge offset"
    },
    {
      "label": "Offset (square) bottom",
      "value": "1275",
      "unit": "",
      "appliesTo": "deck level plan edge offset"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "deck geometry, skew callout"
    },
    {
      "label": "Barrier/beam spacing typical",
      "value": "5000",
      "unit": "",
      "appliesTo": "RCC crash barrier / beam spacing, typical"
    },
    {
      "label": "Pile spacing",
      "value": "3750",
      "unit": "",
      "appliesTo": "foundation level plan, repeated 4 times"
    },
    {
      "label": "Total width (foundation level)",
      "value": "16550",
      "unit": "",
      "appliesTo": "foundation level plan cross dimension"
    },
    {
      "label": "Offset (foundation level) top",
      "value": "775",
      "unit": "",
      "appliesTo": "foundation level plan edge offset"
    },
    {
      "label": "Offset (foundation level) bottom",
      "value": "775",
      "unit": "",
      "appliesTo": "foundation level plan edge offset"
    },
    {
      "label": "Scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "drawing scale"
    }
  ],
  "notes": [
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "(SCALE 1:300)",
    "30° SKEW",
    "5000 (TYP.)"
  ],
  "labels": [
    "P1",
    "A1",
    "TO KHANDWA",
    "C OF EXP. JOINT",
    "RCC CRASH BARRIER",
    "INDEPENDENT R... (partial, cut off)",
    "MEDI... P... (partial, cut off)"
  ],
  "description": "This crop shows two half-plan drawings of a skewed bridge span between pier P1 and abutment A1: the left half depicts the deck level with crash barriers, girder lines, and drainage symbols along a 30° skewed edge, while the right half shows the foundation level with a grid of circular pile marks at a skew, both plans dimensioned in millimeters with overall span, offsets, and spacing values. The drawing documents the deck layout and corresponding foundation/pile arrangement for a single span, including skew geometry and edge offsets, but does not show the full width of the bridge (only one half plan of each level is presented)."
}

p01_r09Plan

  • Median/paved shoulder area×1trapezoidalpartial label 'MEDI...P...' visible near right side, likely median or paved shoulder

40000 Overall span (square)46189 Overall span (skew)1170 Offset at P1 (square)1350 Offset at P1 (skew)3500 Girder spacing16550 Total width (deck level)1275 Offset (square) top1275 Offset (square) bottom+7 more

crop

p01_r03

page 1 · deck_p01_r03
Original
p01_r03
{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Located at left end of bridge deck, centerline of expansion joint marked at this location"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Intermediate support shown on right side of plan"
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular (skewed)",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Two carriageways shown, right side and left side of bridge"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear",
      "material": "reinforced concrete",
      "count": 4,
      "note": "Runs along edges of carriageways and median side"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown at both approach ends adjacent to abutment/embankment"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Located at outer edges of each carriageway"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "Centerline of median shown between the two bridge carriageways"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline of expansion joint marked at abutment A1"
    },
    {
      "name": "Embankment/slope protection area",
      "tag": "",
      "shape": "fan/radial pattern",
      "material": "",
      "count": 2,
      "note": "Shown as planting/turfing pattern at both approach ends beyond abutment and pier extents"
    }
  ],
  "measurements": [
    {
      "label": "ROW width",
      "value": "80000",
      "unit": "",
      "appliesTo": "overall right-of-way"
    },
    {
      "label": "Width (each side)",
      "value": "40000",
      "unit": "",
      "appliesTo": "one carriageway side width"
    },
    {
      "label": "Bridge width",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH label, right side"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY, right side"
    },
    {
      "label": "Footpath dimension",
      "value": "1500",
      "unit": "",
      "appliesTo": "footpath, right side"
    },
    {
      "label": "Kerb offset",
      "value": "100",
      "unit": "",
      "appliesTo": "footpath adjacent dimension"
    },
    {
      "label": "Barrier offset",
      "value": "450",
      "unit": "",
      "appliesTo": "crash barrier position, repeated multiple locations"
    },
    {
      "label": "Median offset",
      "value": "2900",
      "unit": "",
      "appliesTo": "centerline of median dimension"
    },
    {
      "label": "Width (left side)",
      "value": "16550",
      "unit": "",
      "appliesTo": "WIDTH label, left side"
    },
    {
      "label": "Carriageway width (left)",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY, left side"
    },
    {
      "label": "Span/typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "TYP. spacing between markings/barrier posts"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "",
      "appliesTo": "Approach slab dimension"
    },
    {
      "label": "Overall square length",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "deck span between A1 and P1, square measurement"
    },
    {
      "label": "Overall skew length",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "deck span between A1 and P1, skew measurement"
    },
    {
      "label": "Span length square",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "span between A1 and P1 centerlines, square"
    },
    {
      "label": "Span length skew",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "span between A1 and P1 centerlines, skew"
    },
    {
      "label": "Offset square",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "expansion joint offset at A1, square"
    },
    {
      "label": "Offset skew",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "expansion joint offset at A1, skew"
    },
    {
      "label": "Offset square",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "offset at P1, square"
    },
    {
      "label": "Offset skew",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "offset at P1, skew"
    },
    {
      "label": "Segment spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "repeated girder/beam spacing along right side, four instances"
    },
    {
      "label": "Segment spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "repeated girder/beam spacing along left side, four instances"
    },
    {
      "label": "Total width dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "overall width right side, repeated"
    },
    {
      "label": "Edge offset",
      "value": "1275",
      "unit": "",
      "appliesTo": "edge dimension near P1 and far right/bottom edges, multiple instances"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "skew angle at P1 support line"
    }
  ],
  "notes": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "30° SKEW",
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWI[NG...] (text cut off)",
    "(SCALE 1:300)"
  ],
  "labels": [
    "A1",
    "P1",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)",
    "C BRIDGE (LEFT SIDE)",
    "C OF MEDIAN",
    "APPROACH SLAB",
    "RCC CRASH BARRIER",
    "FOOTPATH",
    "WIDTH",
    "CARRIAGEWAY",
    "ROW"
  ],
  "description": "This crop is a half plan view of a bridge deck at deck level, showing two parallel carriageways (right side toward Dewas and left side toward Pikaradiya) separated by a median, with abutment A1 at one end and pier P1 at the other end at a 30° skew angle. It documents overall geometry including carriageway widths, footpath widths, RCC crash barrier locations, approach slab dimensions, and span lengths given in both square and skew measurements; embankment/turfed slope areas are shown schematically beyond the abutment and pier lines. The drawing is a plan-level layout, not an elevation or section, and the right-hand edge of the sheet appears cropped, cutting off part of the title text."
}

p01_r03Plan

  • Median×1linear stripCenterline of median shown between the two bridge carriageways

80000 ROW width40000 Width (each side)16550 Bridge width13500 Carriageway width1500 Footpath dimension100 Kerb offset450 Barrier offset2900 Median offset+17 more

crop

p01_r03 half plan of bridge deck with crash barriers

page 1 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p01_r03_half_plan_of_bridge_deck_with_crash_barriers
Original
p01_r03 half plan of bridge deck with crash barriers
{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at left end of bridge, at expansion joint centerline"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at right end of shown span"
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular (skewed)",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Shown in half plan at deck level, skewed 30°"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One on right-side carriageway approach, one on left-side carriageway approach"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "linear",
      "material": "reinforced concrete",
      "count": 4,
      "note": "Running along both edges of both carriageways"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "At centerline near abutment A1"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular strip",
      "material": "",
      "count": 2,
      "note": "On both outer edges of the deck, at top and bottom of plan"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Centerline of median between left and right bridge carriageways"
    },
    {
      "name": "Girders (deck beams)",
      "tag": "",
      "shape": "longitudinal parallel lines",
      "material": "",
      "count": null,
      "note": "Shown as multiple parallel lines representing girder layout beneath deck, spaced at 3500 typical"
    },
    {
      "name": "Tree/landscape symbols",
      "tag": "",
      "shape": "circular clusters",
      "material": "",
      "count": null,
      "note": "Decorative landscaping symbols shown near abutment approach areas, not a constructional item but shown for context"
    }
  ],
  "measurements": [
    {
      "label": "Overall ROW width",
      "value": "80000",
      "unit": "",
      "appliesTo": "Right of way"
    },
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "Bridge cross width (top)"
    },
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "",
      "appliesTo": "Bridge cross width (bottom)"
    },
    {
      "label": "Span length (square)",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "Span between A1 and P1, square measurement"
    },
    {
      "label": "Span length (skew)",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "Span between A1 and P1, skew measurement"
    },
    {
      "label": "Span length (square) right side",
      "value": "40000(SQ)",
      "unit": "",
      "appliesTo": "Span beyond P1, square measurement"
    },
    {
      "label": "Span length (skew) right side",
      "value": "46189(SK)",
      "unit": "",
      "appliesTo": "Span beyond P1, skew measurement"
    },
    {
      "label": "Distance (square)",
      "value": "37761(SQ)",
      "unit": "",
      "appliesTo": "Distance between expansion joint and P1 area"
    },
    {
      "label": "Distance (skew)",
      "value": "43603(SK)",
      "unit": "",
      "appliesTo": "Distance between expansion joint and P1 area (skew)"
    },
    {
      "label": "Offset (square)",
      "value": "1070(SQ)",
      "unit": "",
      "appliesTo": "Near abutment A1, expansion joint offset"
    },
    {
      "label": "Offset (skew)",
      "value": "1236(SK)",
      "unit": "",
      "appliesTo": "Near abutment A1, expansion joint offset (skew)"
    },
    {
      "label": "Offset (square)",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "Near pier P1"
    },
    {
      "label": "Offset (skew)",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "Near pier P1 (skew)"
    },
    {
      "label": "Spacing (typical)",
      "value": "5000",
      "unit": "",
      "appliesTo": "RCC crash barrier post spacing, typical"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "Carriageway (both sides)"
    },
    {
      "label": "Width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Bridge width (both carriageways)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "Footpath"
    },
    {
      "label": "Dimension",
      "value": "450",
      "unit": "",
      "appliesTo": "Edge strip near footpath/crash barrier"
    },
    {
      "label": "Dimension",
      "value": "100",
      "unit": "",
      "appliesTo": "Edge strip near footpath/crash barrier"
    },
    {
      "label": "Median offset",
      "value": "2900",
      "unit": "",
      "appliesTo": "Centerline of median"
    },
    {
      "label": "Girder spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "Approach slab / girder spacing, repeated multiple times"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "Bridge skew angle at P1"
    },
    {
      "label": "Offset",
      "value": "1275",
      "unit": "",
      "appliesTo": "Edge offset near P1, top and bottom"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "5000 (TYP.)",
    "30° SKEW",
    "HALF PLAN SHOWING DECK LEVEL (SCALE 1:300)"
  ],
  "labels": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "A1",
    "P1",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)",
    "C BRIDGE (LEFT SIDE)",
    "C OF MEDIAN",
    "APPROACH SLAB",
    "FOOTPATH",
    "CARRIAGEWAY",
    "WIDTH",
    "ROW",
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOW..."
  ],
  "description": "This crop shows a half-plan view at deck level of a skewed highway bridge between abutment A1 and pier P1, with the corresponding half plan on the far side extending beyond P1. It details the carriageway widths, footpaths, median, RCC crash barriers, approach slabs, and the 30° skew angle, along with square and skew dimensions for span lengths and offsets. The drawing also indicates directional references 'TO DEWAS' and 'TO PIKARADIYA' and shows landscaped areas near both abutment approaches."
}

p01_r03 half plan of bridge deck with crash barriersPlan

  • Median×1linearCenterline of median between left and right bridge carriageways

80000 Overall ROW width40000 Overall width40000 Overall width40000(SQ) Span length (square)46189(SK) Span length (skew)40000(SQ) Span length (square) right side46189(SK) Span length (skew) right side37761(SQ) Distance (square)+15 more

crop

p01_r05 half plan showing deck level

page 1 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p01_r05_half_plan_showing_deck_level
Original
p01_r05 half plan showing deck level
{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "rectangular, skewed alignment",
      "material": "reinforced concrete",
      "count": 1,
      "note": "marked with detail bubble A1 at centerline of expansion joint"
    },
    {
      "name": "Approach Slab",
      "tag": "",
      "shape": "rectangular, skewed",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one each for right and left carriageway"
    },
    {
      "name": "Expansion Joint",
      "tag": "",
      "shape": "linear, skewed",
      "material": "",
      "count": 1,
      "note": "centerline shown at abutment A1, dimensions 1070(SQ)/1236(SK)"
    },
    {
      "name": "RCC Crash Barrier",
      "tag": "",
      "shape": "linear, rectangular section",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one along median edge, one along outer edge; callout leader shown"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 2,
      "note": "1500mm wide footpaths on outer edges of both carriageways"
    },
    {
      "name": "Median",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "centerline of median between two carriageways, width 2900"
    },
    {
      "name": "Drainage Inlet / Scupper",
      "tag": "",
      "shape": "small square symbol",
      "material": "",
      "count": 10,
      "note": "repeated small square symbols along carriageway edges, likely drainage spouts/scuppers"
    },
    {
      "name": "Trees/Vegetation",
      "tag": "",
      "shape": "irregular clusters",
      "material": "",
      "count": null,
      "note": "shown symbolically at both approach ends, not a constructional item but indicates existing ground/landscape"
    },
    {
      "name": "Expansion Joint Marks (Small triangular symbols)",
      "tag": "",
      "shape": "triangular symbols in a row",
      "material": "",
      "count": 7,
      "note": "repeated symbols along top edge of carriageway, likely joint or marker locations"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "40000",
      "unit": "mm",
      "appliesTo": "cross-section width, both sides"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "Footpath"
    },
    {
      "label": "Kerb/edge strip",
      "value": "100",
      "unit": "mm",
      "appliesTo": "edge strip adjacent to footpath"
    },
    {
      "label": "Crash barrier offset",
      "value": "450",
      "unit": "mm",
      "appliesTo": "RCC Crash Barrier position, repeated multiple locations"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "mm",
      "appliesTo": "Carriageway (right and left)"
    },
    {
      "label": "Bridge width (right/left)",
      "value": "16550",
      "unit": "mm",
      "appliesTo": "Bridge width, right and left side"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "mm",
      "appliesTo": "Median"
    },
    {
      "label": "Approach slab length",
      "value": "3500",
      "unit": "mm",
      "appliesTo": "Approach Slab, both sides"
    },
    {
      "label": "Expansion joint offset (square)",
      "value": "1070",
      "unit": "mm",
      "appliesTo": "Expansion Joint (SQ)"
    },
    {
      "label": "Expansion joint offset (skew)",
      "value": "1236",
      "unit": "mm",
      "appliesTo": "Expansion Joint (SK)"
    },
    {
      "label": "Overall dimension (square)",
      "value": "40000",
      "unit": "mm",
      "appliesTo": "overall plan dimension SQ"
    },
    {
      "label": "Overall dimension (skew)",
      "value": "46189",
      "unit": "mm",
      "appliesTo": "overall plan dimension SK"
    },
    {
      "label": "Secondary overall dimension (square)",
      "value": "37761",
      "unit": "mm",
      "appliesTo": "secondary plan dimension SQ"
    },
    {
      "label": "Secondary overall dimension (skew)",
      "value": "43603",
      "unit": "mm",
      "appliesTo": "secondary plan dimension SK"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "mm",
      "appliesTo": "repeated spacing marks along carriageway (TYP.)"
    }
  ],
  "notes": [
    "TO DEWAS",
    "TO PIKARADIYA",
    "5000 (TYP.)",
    "RCC CRA... (truncated, likely 'RCC CRASH BARRIER')",
    "RCC CRASH BARRIER"
  ],
  "labels": [
    "A1",
    "C OF EXP. JOINT",
    "C BRIDGE (RIGHT SIDE)",
    "C BRIDGE (LEFT SIDE)",
    "C OF MEDIAN",
    "APPROACH SLAB",
    "FOOTPATH",
    "16550 WIDTH",
    "13500 CARRIAGEWAY"
  ],
  "description": "This crop shows a plan view of a bridge deck and its approach slabs at abutment A1, including dimensions for carriageway widths, footpaths, median, and expansion joint offsets for both square (SQ) and skew (SK) alignments. It also shows RCC crash barriers along both carriageways and directional labels indicating traffic flow toward Dewas and Pikaradiya. The drawing is a fragment of a larger bridge general arrangement plan, focusing on one end (abutment A1) with symbolic tree/vegetation representation at both approach ends."
}

p01_r05 half plan showing deck levelPlan

  • Median×1linear stripcenterline of median between two carriageways, width 2900

40000 mm Overall width1500 mm Footpath width100 mm Kerb/edge strip450 mm Crash barrier offset13500 mm Carriageway width16550 mm Bridge width (right/left)2900 mm Median width3500 mm Approach slab length+7 more