Drawing → BOQ
← Mindmapwhat the drawings said

Roadway Alignment

1 page · 3 crops · ×3 · other

Matched toRoad Alignmentbridge.alignment_system.road_alignmenton “Roadway Alignment”

1 read off the drawings · 2 not established
The class asks forValueHowFrom
ChainageCHwants m64+412 mRead directly from title block / key plan data table: 'STRUCTURE CH: 64+412' / 'PROPOSED CH: 64+412'All three crops consistently report the structure chainage as 64+412 in the title block/key plan data table, which is the chainage of the roadway alignment at the bridge location.readp1 · p01_r07p1 · p01_r01 site key plan showing row and road alignmentp1 · p01_r07 half plan showing foundation level
RadiusRwants m/mmnot establishedThe Key Plan shows the alignment as a curved line but no numeric radius is stated anywhere in the crops.not found
SlopeSLOPEwants ratio/percentnot establishedOnly skew angle (30°), which pertains to the bridge/road crossing angle, not longitudinal roadway slope, is given; no slope data is present.not found

Worked out by anthropic/claude-sonnet-5 from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.

How the sheets named it

Key Plan roadway alignmentRoadway/Highway alignmentBridge/Road alignment

Notes on the sheets that carry it

  • p1INDEPENDENT RETAINING WALL
  • p1MEDIAN WALL PCC M15
  • p1C OF EXP. JOINT
  • p1TO KHANDWA
  • p1PROPOSED SPAN 2X40m
  • p1SKEW 30°
  • p1PROPOSAL New Construction
  • p1STRUCTURE TYPE MJBR
  • p1STRUCTURE CH: 64+412
  • p1PROPOSED CH: 64+412
  • p1TO KHANDWA (direction arrow)
  • p1C OF EXP. JOINT (centerline of expansion joint)
  • p1RET./TOE WALL
  • p1PROPOSED SPAN: MJBR

Every crop it was read in — the drawing beside what the model took off it

Page 1

crop

p01_r07

page 1 · pier_and_abutment_foundations_p01_r07
Original
p01_r07
{
  "view": "Plan",
  "objects": [
    {
      "name": "Pile foundation (piles shown in plan, skewed grid)",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Shown as circles in a skewed grid pattern under two half-plan panels labelled foundation level"
    },
    {
      "name": "Retaining wall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Labelled 'INDEPENDENT RETAINING WALL', one at top and one at bottom of the skewed panels"
    },
    {
      "name": "Median wall",
      "tag": "",
      "shape": "rectangular (narrow strip)",
      "material": "PCC M15",
      "count": 1,
      "note": "Located between the two skewed deck/foundation panels, labelled 'MEDIAN WALL PCC M15'"
    },
    {
      "name": "Expansion joint centerline marker",
      "tag": "A1",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Labelled 'C OF EXP. JOINT' with circled tag A1"
    },
    {
      "name": "Bearing/pile cap markers (small squares in lower left partial view)",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 4,
      "note": "Small square markers along the edge of the lower-left partial skewed panel, possibly bearing or joint locations"
    },
    {
      "name": "Direction sign/callout",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Arrow with text 'TO KHANDWA'"
    },
    {
      "name": "Key Plan roadway alignment",
      "tag": "",
      "shape": "linear/curved",
      "material": "",
      "count": 1,
      "note": "Shown in separate Key Plan inset at top right, showing road, river (Sipra River), ROW lines, drain, and RET./TOE WALL"
    },
    {
      "name": "Toe wall / retaining wall (Key Plan)",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Labelled 'RET./TOE WALL' in Key Plan inset"
    }
  ],
  "measurements": [
    {
      "label": "Overall length (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "Bridge/structure plan"
    },
    {
      "label": "Overall length (skew)",
      "value": "46189",
      "unit": "",
      "appliesTo": "Bridge/structure plan"
    },
    {
      "label": "Edge dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Panel edge, top left"
    },
    {
      "label": "Edge dimension",
      "value": "3500",
      "unit": "",
      "appliesTo": "Repeated segment, left side vertical dimension chain (5 times)"
    },
    {
      "label": "Cumulative dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "Left vertical dimension chain, foundation panel"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Top edge of upper skewed panel"
    },
    {
      "label": "Repeated segment",
      "value": "3750",
      "unit": "",
      "appliesTo": "Upper skewed panel, vertical dimension chain (4 times)"
    },
    {
      "label": "Cumulative dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "Upper skewed panel vertical total"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Bottom edge of upper skewed panel / top edge of lower skewed panel"
    },
    {
      "label": "Repeated segment",
      "value": "3750",
      "unit": "",
      "appliesTo": "Lower skewed panel, vertical dimension chain (4 times)"
    },
    {
      "label": "Cumulative dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "Lower skewed panel vertical total"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Bottom edge of lower skewed panel"
    },
    {
      "label": "Edge dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Bottom left partial panel edge"
    },
    {
      "label": "Repeated segment",
      "value": "3500",
      "unit": "",
      "appliesTo": "Lower left partial panel vertical dimension chain (4 times)"
    },
    {
      "label": "Cumulative dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "Lower left partial panel vertical total"
    },
    {
      "label": "Scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "Half plan showing foundation level"
    },
    {
      "label": "Scale",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "Key Plan"
    },
    {
      "label": "Structure chainage",
      "value": "64+412",
      "unit": "",
      "appliesTo": "Title block / structure CH"
    },
    {
      "label": "Proposed span",
      "value": "2X40m",
      "unit": "m",
      "appliesTo": "Title block / proposed span"
    },
    {
      "label": "Skew",
      "value": "30°",
      "unit": "",
      "appliesTo": "Title block / skew"
    },
    {
      "label": "Chainage marker",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Key Plan alignment"
    },
    {
      "label": "Chainage marker",
      "value": "64+500",
      "unit": "",
      "appliesTo": "Key Plan alignment"
    }
  ],
  "notes": [
    "INDEPENDENT RETAINING WALL",
    "MEDIAN WALL PCC M15",
    "C OF EXP. JOINT",
    "TO KHANDWA",
    "PROPOSED SPAN 2X40m",
    "SKEW 30°",
    "PROPOSAL New Construction",
    "STRUCTURE TYPE MJBR",
    "STRUCTURE CH: 64+412"
  ],
  "labels": [
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "(SCALE 1:300)",
    "KEY PLAN",
    "(SCALE 1:2000)",
    "RET./TOE WALL",
    "ROW",
    "A1",
    "ING DECK LEVEL"
  ],
  "description": "This crop shows a partial site/foundation plan for a bridge structure, specifically a 'half plan showing foundation level' at scale 1:300 with skewed dimension grids (16550 total, subdivided into 3750/3500 segments) indicating pile locations, flanked by independent retaining walls and a median wall (PCC M15) between two carriageway panels. An inset 'Key Plan' at scale 1:2000 in the upper right shows the roadway alignment near chainage 64+400 to 64+500 crossing what appears to be the Sipra River, with ROW (right-of-way) lines and a retaining/toe wall, alongside a partial title block giving structure chainage 64+412, proposed span 2x40m, skew 30°, and proposal type 'New Construction'."
}

p01_r07Plan

  • Key Plan roadway alignment×1linear/curvedShown in separate Key Plan inset at top right, showing road, river (Sipra River), ROW lines, drain, and RET./TOE WALL

40000 Overall length (square)46189 Overall length (skew)1275 Edge dimension3500 Edge dimension16550 Cumulative dimension775 Edge dimension3750 Repeated segment16550 Cumulative dimension+14 more

crop

p01_r01 site key plan showing row and road alignment

page 1 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p01_r01_site_key_plan_showing_row_and_road_alignment
Original
p01_r01 site key plan showing row and road alignment
{
  "view": "Plan",
  "objects": [
    {
      "name": "Roadway/Highway alignment",
      "tag": "",
      "shape": "linear, curved",
      "material": "",
      "count": 1,
      "note": "Runs diagonally across crop, connecting Dewas and Khandwa directions, crossing a river/nala shown by hatched area"
    },
    {
      "name": "Bridge/Structure (proposed)",
      "tag": "",
      "shape": "rectangular hatched zone",
      "material": "",
      "count": 1,
      "note": "Cross-hatched trapezoidal area over Shipra River indicating the proposed structure location per key plan table"
    },
    {
      "name": "Retaining/Toe Wall",
      "tag": "RET./TOE WALL",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Two callouts labeled 'RET./TOE WALL' on either side of the alignment"
    },
    {
      "name": "Right of Way boundary",
      "tag": "ROW",
      "shape": "linear",
      "material": "",
      "count": 4,
      "note": "Multiple ROW lines/labels bounding the corridor on both sides"
    },
    {
      "name": "Earthen Drain",
      "tag": "",
      "shape": "linear, sinuous",
      "material": "",
      "count": 1,
      "note": "Labeled 'Earthen Drain' near structure area"
    },
    {
      "name": "Utility Pipe/Duct",
      "tag": "",
      "shape": "circular (in plan, linear run)",
      "material": "",
      "count": 1,
      "note": "Text reads 'UTILITY DUCT / RCC PIPE (0.6m DIA)' running parallel to road near CH 64+500"
    },
    {
      "name": "River (Shipra River)",
      "tag": "",
      "shape": "irregular natural watercourse",
      "material": "",
      "count": 1,
      "note": "Labeled 'Shipra River' crossing under proposed structure"
    }
  ],
  "measurements": [
    {
      "label": "Proposed CH",
      "value": "64+412",
      "unit": "",
      "appliesTo": "Structure"
    },
    {
      "label": "Structure Type",
      "value": "MJBR",
      "unit": "",
      "appliesTo": "Structure"
    },
    {
      "label": "Proposed Span",
      "value": "2X40m",
      "unit": "m",
      "appliesTo": "Structure"
    },
    {
      "label": "Skew",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "Structure"
    },
    {
      "label": "Proposal",
      "value": "New Construction",
      "unit": "",
      "appliesTo": "Structure"
    },
    {
      "label": "Chainage marker",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Roadway alignment"
    },
    {
      "label": "Chainage marker",
      "value": "64+500",
      "unit": "",
      "appliesTo": "Roadway alignment"
    },
    {
      "label": "Utility duct/pipe diameter",
      "value": "0.6",
      "unit": "m",
      "appliesTo": "Utility Duct/RCC Pipe"
    },
    {
      "label": "Scale",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "Key Plan drawing scale"
    }
  ],
  "notes": [
    "PROPOSED CH: 64+412",
    "STRUCTURE TYPE MJBR",
    "PROPOSED SPAN 2X40m",
    "SKEW 30°",
    "PROPOSAL New Construction"
  ],
  "labels": [
    "KEY PLAN",
    "(SCALE 1:2000)",
    "TO DEWAS",
    "TO KHANDWA",
    "ROW",
    "RET./ TOE WALL",
    "Shipra River",
    "Earthen Drain",
    "Agriculture Land",
    "N",
    "S",
    "E",
    "W",
    "64+400",
    "64+500"
  ],
  "description": "This is a Key Plan (scale 1:2000) showing the general layout of a proposed road/bridge crossing over the Shipra River, with chainages from approximately 64+400 to 64+500. It indicates the ROW boundaries, retaining/toe walls, an earthen drain, a utility duct/RCC pipe of 0.6m diameter, and a summary table giving the proposed structure's chainage (64+412), type (MJBR), span (2x40m), skew (30°), and proposal status (New Construction). The crop is an orientation/index drawing rather than a detailed structural plan."
}

p01_r01 site key plan showing row and road alignmentPlan

  • Roadway/Highway alignment×1linear, curvedRuns diagonally across crop, connecting Dewas and Khandwa directions, crossing a river/nala shown by hatched area

64+412 Proposed CHMJBR Structure Type2X40m m Proposed Span30 degrees SkewNew Construction Proposal64+400 Chainage marker64+500 Chainage marker0.6 m Utility duct/pipe diameter+1 more

crop

p01_r07 half plan showing foundation level

page 1 · structural_drawings_pkg_1_890ff33d80e843ef8aa5a52a7a9de3d8_p01_r07_half_plan_showing_foundation_level
Original
p01_r07 half plan showing foundation level
{
  "view": "Plan",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "skewed rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Marked at centerline of expansion joint, skew abutment plan"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 40,
      "note": "Shown as circles in foundation half-plans, arranged in grid rows of 5 across two skewed foundation blocks"
    },
    {
      "name": "Independent Retaining Wall",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 2,
      "note": "Called out at both ends of the foundation plans"
    },
    {
      "name": "Median Wall",
      "tag": "",
      "shape": "rectangular strip",
      "material": "PCC M15",
      "count": 1,
      "note": "Located between the two skewed foundation blocks"
    },
    {
      "name": "Retaining/Toe Wall",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Shown in key plan"
    },
    {
      "name": "Bridge/Road alignment",
      "tag": "",
      "shape": "linear strip",
      "material": "",
      "count": 1,
      "note": "Shown crossing river in key plan, hatched deck area"
    },
    {
      "name": "Bearing/Support markers",
      "tag": "",
      "shape": "square",
      "material": "",
      "count": 4,
      "note": "Small square symbols on deck-level half plan at left, likely bearing positions"
    }
  ],
  "measurements": [
    {
      "label": "Overall length (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "Bridge/Abutment plan"
    },
    {
      "label": "Overall length (skew)",
      "value": "46189",
      "unit": "",
      "appliesTo": "Bridge/Abutment plan"
    },
    {
      "label": "Transverse dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Foundation plan edge strip"
    },
    {
      "label": "Bay spacing",
      "value": "3750",
      "unit": "",
      "appliesTo": "Foundation plan pile bay, repeated 4 times per block"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Foundation plan block width"
    },
    {
      "label": "Transverse dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Deck level half plan edge strip"
    },
    {
      "label": "Bay spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "Deck level half plan bay, repeated 4 times"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Deck level half plan block width"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "°",
      "appliesTo": "Bridge structure (from key plan data table)"
    },
    {
      "label": "Proposed span",
      "value": "2X40m",
      "unit": "",
      "appliesTo": "Structure (from key plan data table)"
    },
    {
      "label": "Chainage",
      "value": "64+412",
      "unit": "",
      "appliesTo": "Structure location"
    },
    {
      "label": "Chainage marker",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Key plan"
    },
    {
      "label": "Chainage marker",
      "value": "64+500",
      "unit": "",
      "appliesTo": "Key plan"
    }
  ],
  "notes": [
    "TO KHANDWA (direction arrow)",
    "C OF EXP. JOINT (centerline of expansion joint)",
    "INDEPENDENT RETAINING WALL",
    "MEDIAN WALL PCC M15",
    "RET./TOE WALL",
    "PROPOSED SPAN: MJBR",
    "PROPOSAL: New Construction",
    "SKEW: 30°"
  ],
  "labels": [
    "HALF PLAN SHOWING FOUNDATION LEVEL (SCALE 1:300)",
    "...NG DECK LEVEL (partial label, likely 'HALF PLAN SHOWING DECK LEVEL')",
    "KEY PLAN (SCALE 1:2000)",
    "ROW",
    "Shipra River",
    "Agricultur... (partial)",
    "en Drain (partial)"
  ],
  "description": "This crop shows two half-plan drawings of a skewed bridge foundation and deck, including pile layouts, abutment A1, retaining walls, and a median wall, alongside a small key plan (scale 1:2000) locating the structure relative to the Shipra River, road alignment, and chainage markers 64+400 and 64+500. A partial data table in the upper right lists structure type, skew, proposed span, and chainage 64+412. The drawing documents the bridge's substructure geometry and its site context rather than superstructure details."
}

p01_r07 half plan showing foundation levelPlan

  • Bridge/Road alignment×1linear stripShown crossing river in key plan, hatched deck area

40000 Overall length (square)46189 Overall length (skew)775 Transverse dimension3750 Bay spacing16550 Total width1275 Transverse dimension3500 Bay spacing16550 Total width+5 more