Matched toUtility Ductbridge.ancillary_system.utility_ducton “Utility Pipe/Duct”
2 read off the drawings · 1 derived · 1 not established
| The class asks for | Value | How | From |
|---|---|---|---|
| LengthLwants m/mm | not establishedThe key plan shows the utility duct/RCC pipe running parallel to the road near CH 64+500 but gives no start/end chainage or length dimension for the pipe itself; only the road chainage markers (64+400, 64+500) are shown, which do not define the pipe's extent. | not found | |
| Drain DiameterD_drainwants mm | 600 mm0.6 m = 0.6 × 1000 mm = 600 mmThe reading explicitly states 'UTILITY DUCT / RCC PIPE (0.6m DIA)' and a measurement entry 'Utility duct/pipe diameter: 0.6 m' applied to 'Utility Duct/RCC Pipe', which is this item. Converted from m to mm per unit requirement. | derived | p1 · p01_r01 site key plan showing row and road alignment |
| Instance CountNwants count | 1 countObject entry 'Utility Pipe/Duct' has count: 1The object list explicitly gives a count of 1 for the Utility Pipe/Duct object shown in the key plan. | read | p1 · p01_r01 site key plan showing row and road alignment |
| Material TypeMAT | RCC -The label text reads 'UTILITY DUCT / RCC PIPE (0.6m DIA)', explicitly naming the pipe material as RCC (Reinforced Cement Concrete). | read | p1 · p01_r01 site key plan showing row and road alignment |
Worked out by anthropic/claude-sonnet-5 from the readings below, which are the source. A derived value shows its arithmetic — check it against the drawing before it is priced.
Notes on the sheets that carry it
- p1PROPOSED CH: 64+412
- p1STRUCTURE TYPE MJBR
- p1PROPOSED SPAN 2X40m
- p1SKEW 30°
- p1PROPOSAL New Construction
Every crop it was read in — the drawing beside what the model took off it
Page 1
crop
p01_r01 site key plan showing row and road alignmentPlan
- Utility Pipe/Duct×1circular (in plan, linear run)Text reads 'UTILITY DUCT / RCC PIPE (0.6m DIA)' running parallel to road near CH 64+500
64+412 Proposed CHMJBR Structure Type2X40m m Proposed Span30 degrees SkewNew Construction Proposal64+400 Chainage marker64+500 Chainage marker0.6 m Utility duct/pipe diameter+1 more