Pile Cap

{
  "view": "Plan",
  "objects": [
    {
      "name": "Pile cap / foundation raft",
      "tag": "A1",
      "shape": "skewed rectangular (parallelogram)",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Two mirrored skewed pile foundation groups shown, separated by a median wall; likely abutment/pier foundations at a skewed crossing."
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Piles shown as circles arranged in a grid pattern within each skewed foundation outline; exact count not reliably countable from the crop due to overlapping skew lines."
    },
    {
      "name": "Median wall",
      "tag": "",
      "shape": "trapezoidal strip",
      "material": "PCC M15",
      "count": 1,
      "note": "Located between the two pile foundation groups, labelled 'MEDIAN WALL PCC M15'."
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "One at the top-right end of the upper foundation and one at the bottom-right end of the lower foundation."
    },
    {
      "name": "Retaining/Toe wall",
      "tag": "RET./TOE WALL",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Shown only in the Key Plan inset, not detailed in this crop."
    },
    {
      "name": "Borehole location marker",
      "tag": "",
      "shape": "symbol (crosshair circle)",
      "material": "",
      "count": null,
      "note": "Appears only in the Legend box; represents borehole locations elsewhere on the sheet."
    }
  ],
  "measurements": [
    {
      "label": "Edge offset",
      "value": "775",
      "unit": "mm",
      "appliesTo": "upper foundation, top edge"
    },
    {
      "label": "Pile row spacing",
      "value": "3750",
      "unit": "mm",
      "appliesTo": "upper foundation, 4 intervals"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "mm",
      "appliesTo": "upper foundation"
    },
    {
      "label": "Edge offset",
      "value": "775",
      "unit": "mm",
      "appliesTo": "between upper and lower foundation groups"
    },
    {
      "label": "Edge offset",
      "value": "775",
      "unit": "mm",
      "appliesTo": "lower foundation, near median wall"
    },
    {
      "label": "Pile row spacing",
      "value": "3750",
      "unit": "mm",
      "appliesTo": "lower foundation, 4 intervals"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "mm",
      "appliesTo": "lower foundation"
    },
    {
      "label": "Edge offset",
      "value": "775",
      "unit": "mm",
      "appliesTo": "lower foundation, bottom edge"
    },
    {
      "label": "Chainage",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Key Plan location marker"
    },
    {
      "label": "Proposed span",
      "value": "2X40m",
      "unit": "m",
      "appliesTo": "structure (from Key Plan data table)"
    },
    {
      "label": "Skew",
      "value": "30",
      "unit": "deg (assumed, marked as 30°)",
      "appliesTo": "structure (from Key Plan data table)"
    },
    {
      "label": "Scale",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "Key Plan"
    }
  ],
  "notes": [
    "SHOWING FOUNDATION LEVEL",
    "TO KHANDWA",
    "ℂ OF EXP. JOINT",
    "INDEPENDENT RETAINING WALL",
    "MEDIAN WALL PCC M15",
    "RET./ TOE WALL",
    "New Construction (partial text under PROPOSAL in Key Plan table)"
  ],
  "labels": [
    "A1",
    "KEY PLAN",
    "(SCALE 1:2000)",
    "ROW",
    "LEGEND:",
    "BOREHOLE LOCA... (partial, likely 'BOREHOLE LOCATION')",
    "STRUCTURE TYPE",
    "PROPOSED SPAN",
    "SKEW",
    "PROPOSAL",
    "Shipra River",
    "64+400"
  ],
  "description": "This crop shows a foundation/pile layout plan for a skewed bridge substructure, depicting two mirrored groups of circular piles arranged in a grid within skewed foundation outlines, separated by a PCC M15 median wall and flanked by independent retaining walls, with dimensions of pile spacing (3750 mm) and edge offsets (775 mm) and an overall width of 16550 mm per group. An inset Key Plan (scale 1:2000) in the upper right shows the site layout near chainage 64+400 by the Shipra River, right-of-way (ROW) lines, a retaining/toe wall callout, and a partial structure data table listing proposed span (2X40m) and skew (30°). A partial Legend box at bottom right references a borehole location symbol."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular, skewed",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in half plan showing deck level; girder lines and borehole-like circles indicating beam/bearing positions"
    },
    {
      "name": "Foundation/pile cap layout",
      "tag": "",
      "shape": "rectangular, skewed",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown in half plan showing foundation level with circular marks likely representing piles"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Represented as circles in grid pattern within foundation-level half plan"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Marked as C of Exp. Joint at A1 gridline"
    },
    {
      "name": "Median wall",
      "tag": "",
      "shape": "rectangular",
      "material": "PCC M15",
      "count": 1,
      "note": "Located between the two half plans"
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 2,
      "note": "Labeled at both ends of deck-level half plan"
    },
    {
      "name": "Retaining/Toe wall",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "Shown in key plan as RET./TOE WALL labels"
    },
    {
      "name": "Earthen drain",
      "tag": "",
      "shape": "linear",
      "material": "earth",
      "count": 1,
      "note": "Shown in key plan near river crossing"
    },
    {
      "name": "Road/carriageway",
      "tag": "TO KHANDWA",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "Direction arrow labeled TO KHANDWA in both plan and key plan"
    },
    {
      "name": "River (Sipra River)",
      "tag": "",
      "shape": "natural watercourse",
      "material": "",
      "count": 1,
      "note": "Shown crossing the alignment in key plan"
    },
    {
      "name": "Borehole location marker",
      "tag": "",
      "shape": "circular with cross",
      "material": "",
      "count": null,
      "note": "Legend symbol; also may appear at other locations not fully visible in this crop"
    }
  ],
  "measurements": [
    {
      "label": "Overall length square",
      "value": "40000",
      "unit": "",
      "appliesTo": "Deck level half plan (SQ)"
    },
    {
      "label": "Overall length skew",
      "value": "46189",
      "unit": "",
      "appliesTo": "Deck level half plan (SK)"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "°",
      "appliesTo": "Bridge skew"
    },
    {
      "label": "Span width dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Deck level half plan edge"
    },
    {
      "label": "Span width dimension",
      "value": "3500",
      "unit": "",
      "appliesTo": "Deck level half plan girder spacing (x4)"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Deck level half plan"
    },
    {
      "label": "Edge dimension",
      "value": "1275",
      "unit": "",
      "appliesTo": "Deck level half plan"
    },
    {
      "label": "Spacing dimension",
      "value": "3750",
      "unit": "",
      "appliesTo": "Foundation level half plan (x4, both sides)"
    },
    {
      "label": "Total width",
      "value": "16550",
      "unit": "",
      "appliesTo": "Foundation level half plan (both halves)"
    },
    {
      "label": "Edge dimension",
      "value": "775",
      "unit": "",
      "appliesTo": "Foundation level half plan edges"
    },
    {
      "label": "Typical spacing",
      "value": "5000",
      "unit": "",
      "appliesTo": "TYP. spacing in deck plan"
    },
    {
      "label": "Chainage",
      "value": "64+412",
      "unit": "",
      "appliesTo": "Structure location (CH.)"
    },
    {
      "label": "Chainage marker",
      "value": "64+400",
      "unit": "",
      "appliesTo": "Key plan"
    },
    {
      "label": "Chainage marker",
      "value": "64+500",
      "unit": "",
      "appliesTo": "Key plan"
    },
    {
      "label": "Proposed span",
      "value": "2X40m",
      "unit": "m",
      "appliesTo": "Proposed structure span"
    },
    {
      "label": "Scale",
      "value": "1:300",
      "unit": "",
      "appliesTo": "Half plan showing deck/foundation level"
    },
    {
      "label": "Scale",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "Key plan"
    }
  ],
  "notes": [
    "INDEPENDENT RETAINING WALL",
    "MEDIAN WALL PCC M15",
    "TO KHANDWA",
    "℄ OF EXP. JOINT",
    "30° SKEW",
    "STRUCTURE TYPE: MJBR",
    "SKEW: 30°",
    "PROPOSAL: New Construction",
    "PROPOSED SPAN: 2X40m",
    "CH.: 64+412"
  ],
  "labels": [
    "HALF PLAN SHOWING DECK LEVEL",
    "HALF PLAN SHOWING FOUNDATION LEVEL",
    "(SCALE 1:300)",
    "KEY PLAN",
    "(SCALE 1:2000)",
    "LEGEND :",
    "BOREHOLE LOCATION",
    "RCC - REINFORCED CEMENT CONCRETE",
    "PCC - PLAIN CEMENT CONCRETE",
    "GL - GROUND LEVEL",
    "℄ - CENTER LINE",
    "FDN - FOUNDATION",
    "LVL - LEVEL",
    "ACTL - ABUTMENT CAP TOP LEVEL",
    "PCTL - PIER CAP TOP LEVEL",
    "ROW",
    "RET./TOE WALL",
    "Sipra River",
    "Earthen Drain",
    "Agriculture Land",
    "A1"
  ],
  "description": "This crop shows two half-plan views of a bridge structure at deck level and foundation level, with detailed skewed dimensions (30° skew, 16550mm width, various 3500/3750mm spacings) indicating girder and pile/foundation layout, along with a median wall and independent retaining walls at both approaches. To the right is a key plan (1:2000) showing the bridge's location crossing the Sipra River near chainage 64+400 to 64+500, flanked by ROW lines, retaining/toe walls, and an earthen drain, with a title block fragment indicating structure type MJBR, proposed span 2X40m, and new construction proposal. A legend defining abbreviations (RCC, PCC, GL, FDN, LVL, ACTL, PCTL) and borehole location symbol is also included at bottom right."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 40,
      "note": "shown as circles arranged in a grid within a skewed foundation outline, appears twice (two separate foundation groups) - count is approximate total visible circles across both groups"
    },
    {
      "name": "Foundation/pile cap outline",
      "tag": "",
      "shape": "trapezoidal/skewed rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "two skewed foundation plan outlines, upper and lower, likely representing two separate substructure units (e.g., abutment or pier foundations) separated by a median wall"
    },
    {
      "name": "Independent retaining wall",
      "tag": "",
      "shape": "rectangular (linear wall in plan)",
      "material": "",
      "count": 2,
      "note": "labeled adjacent to both foundation outlines, at opposite ends"
    },
    {
      "name": "Median wall",
      "tag": "",
      "shape": "rectangular strip",
      "material": "PCC M15",
      "count": 1,
      "note": "located between the two foundation groups, hatched in plan"
    },
    {
      "name": "Retaining/toe wall",
      "tag": "",
      "shape": "linear",
      "material": "",
      "count": 1,
      "note": "shown only in key plan inset, labeled 'RET./TOE WALL'"
    },
    {
      "name": "Borehole location marker",
      "tag": "",
      "shape": "circular with crosshair symbol",
      "material": "",
      "count": null,
      "note": "shown only in legend, symbol definition, not counted as actual boreholes in this crop"
    }
  ],
  "measurements": [
    {
      "label": "Offset from centerline to first pile row",
      "value": "775",
      "unit": "",
      "appliesTo": "upper foundation outline"
    },
    {
      "label": "Pile row spacing",
      "value": "3750",
      "unit": "",
      "appliesTo": "upper foundation outline (repeated 4 times)"
    },
    {
      "label": "Total width dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "upper foundation outline"
    },
    {
      "label": "Offset from centerline to first pile row",
      "value": "775",
      "unit": "",
      "appliesTo": "lower foundation outline"
    },
    {
      "label": "Offset near median wall",
      "value": "775",
      "unit": "",
      "appliesTo": "lower foundation outline"
    },
    {
      "label": "Pile row spacing",
      "value": "3750",
      "unit": "",
      "appliesTo": "lower foundation outline (repeated 4 times)"
    },
    {
      "label": "Total width dimension",
      "value": "16550",
      "unit": "",
      "appliesTo": "lower foundation outline"
    },
    {
      "label": "Chainage marker",
      "value": "64+400",
      "unit": "",
      "appliesTo": "key plan"
    },
    {
      "label": "Skew angle",
      "value": "30",
      "unit": "degrees",
      "appliesTo": "key plan table, structure"
    },
    {
      "label": "Proposed span",
      "value": "2X40",
      "unit": "m (partial, unit inferred from 'm' text)",
      "appliesTo": "key plan table, structure"
    },
    {
      "label": "Scale of key plan",
      "value": "1:2000",
      "unit": "",
      "appliesTo": "Key Plan"
    }
  ],
  "notes": [
    "C OF EXP. JOINT",
    "TO KHANDWA",
    "INDEPENDENT RETAINING WALL",
    "MEDIAN WALL PCC M15",
    "RET./TOE WALL",
    "...SHOWING FOUNDATION LEVEL (text partially cropped on left edge)",
    "PROPOSED SPAN 2X40m (partial, table text)",
    "SKEW 30° (table text)",
    "PROPOSAL New Con... (text cut off, likely 'New Construction')",
    "...URE TYPE MJB... (text cut off, likely 'STRUCTURE TYPE' and 'MJB' bridge type abbreviation)"
  ],
  "labels": [
    "A1",
    "KEY PLAN",
    "(SCALE 1:2000)",
    "LEGEND :",
    "BOREHOLE LOC... (partial, likely 'BOREHOLE LOCATION')",
    "ROW",
    "Shipra River",
    "64+400"
  ],
  "description": "This crop shows a foundation-level plan of a bridge substructure, presenting two skewed rectangular pile grid layouts (each with rows of circular piles spaced at 3750 units, offset 775 from the group edges, and an overall width of 16550), separated by a median wall in PCC M15, with independent retaining walls noted at each end. An inset key plan (scale 1:2000) in the upper right shows the bridge's location relative to the Shipra River, ROW lines, chainage 64+400, and a partial structure data table listing skew angle 30° and proposed span 2x40m. A partial legend at the bottom right defines a borehole location symbol."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "column, circular in elevation (rectangular cap)",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Labelled RCC COLUMN PIER, shown as single circular/cylindrical shaft below pier cap"
    },
    {
      "name": "Pier cap / bearing pedestal",
      "tag": "",
      "shape": "rectangular, stepped",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Supports bearings, dimensioned 1500 depth split into 750+750"
    },
    {
      "name": "Crash barrier",
      "tag": "",
      "shape": "rectangular profile",
      "material": "reinforced concrete",
      "count": 2,
      "note": "RCC CRASH BARRIER at each edge of deck, 230 height shown both sides"
    },
    {
      "name": "PSC Girder",
      "tag": "",
      "shape": "I-girder (tapered flange, shown in section as vertical hatched webs)",
      "material": "precast concrete",
      "count": 2,
      "note": "PRECAST PSC GIRDER (TYP.), one on each side of pier centerline"
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular, pot type",
      "material": "elastomeric/PTFE composite",
      "count": 4,
      "note": "POT-PTFE BEARING (TYP.), two pairs shown symmetric about centerline"
    },
    {
      "name": "Seismic stopper",
      "tag": "",
      "shape": "rectangular block",
      "material": "reinforced concrete",
      "count": 2,
      "note": "RCC SEISMIC STOPPER shown at bearing locations"
    },
    {
      "name": "Deck continuity slab/joint",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "DECK CONTINUITY labelled at top center over pier"
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "RCC PILECAP, dashed outline, depth 1800"
    },
    {
      "name": "Bored cast-in-situ pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "1200 DIA BORED CAST-IN-SITU PILES, shown in section with hooked reinforcement ends"
    }
  ],
  "measurements": [
    {
      "label": "Distance from centerline to bearing",
      "value": "1170",
      "unit": "",
      "appliesTo": "square span layout"
    },
    {
      "label": "Distance from centerline to bearing (skew)",
      "value": "1350",
      "unit": "",
      "appliesTo": "skew span layout"
    },
    {
      "label": "Bearing gap at centerline of pier",
      "value": "1500",
      "unit": "",
      "appliesTo": "skew (SK) dimension between bearings"
    },
    {
      "label": "Crash barrier height",
      "value": "230",
      "unit": "",
      "appliesTo": "RCC crash barrier, both sides"
    },
    {
      "label": "Girder depth",
      "value": "2650",
      "unit": "",
      "appliesTo": "PRECAST PSC GIRDER, both sides"
    },
    {
      "label": "Pier cap total depth",
      "value": "1500",
      "unit": "",
      "appliesTo": "pier cap"
    },
    {
      "label": "Pier cap depth split (upper)",
      "value": "750",
      "unit": "",
      "appliesTo": "pier cap"
    },
    {
      "label": "Pier cap depth split (lower)",
      "value": "750",
      "unit": "",
      "appliesTo": "pier cap"
    },
    {
      "label": "Pier cap width square",
      "value": "3640",
      "unit": "",
      "appliesTo": "pier cap (SQ)"
    },
    {
      "label": "Pier cap width skew",
      "value": "4203",
      "unit": "",
      "appliesTo": "pier cap (SK)"
    },
    {
      "label": "Pier shaft width",
      "value": "1500",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "Pile cap depth",
      "value": "1800",
      "unit": "",
      "appliesTo": "RCC pilecap"
    },
    {
      "label": "Edge distance from pile to pile cap edge",
      "value": "750",
      "unit": "",
      "appliesTo": "pile cap, both sides"
    },
    {
      "label": "Pile spacing center to center",
      "value": "3600",
      "unit": "",
      "appliesTo": "between piles"
    },
    {
      "label": "Total pile cap width",
      "value": "5100",
      "unit": "",
      "appliesTo": "pile cap"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "bored cast-in-situ piles"
    }
  ],
  "notes": [],
  "labels": [
    "P1",
    "℄ OF BRG.",
    "FRL",
    "RCC CRASH BARRIER",
    "DECK CONTINUITY",
    "PRECAST PSC GIRDER (TYP.)",
    "RCC SEISMIC STOPPER",
    "POT-PTFE BEARING (TYP.)",
    "RCC COLUMN PIER",
    "RCC PILECAP",
    "1200 DIA BORED CAST-IN-SITU PILES",
    "SECTION P-P"
  ],
  "description": "This crop is a cross section through bridge pier P1, showing the deck/girder arrangement, pot-PTFE bearings with seismic stoppers atop a stepped pier cap, a single circular RCC column pier shaft, and below-ground an RCC pile cap supported on two 1200mm diameter bored cast-in-situ piles. It documents the substructure geometry and key dimensions (bearing spacing, pier cap and shaft sizes, pile cap depth, pile spacing) for pier P1, distinguishing square (SQ) and skew (SK) dimensions where the bridge is skewed.  The section title 'SECTION P-P' appears partially cut off at the bottom edge."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at left end, with expansion joint centerline and POT-PTFE bearings"
    },
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at right end, labeled 'WALL TYPE ABUTMENT', with expansion joint"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "column, circular/rectangular cap",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Labeled 'RCC COLUMN PIER (TYP.)', supports deck continuity"
    },
    {
      "name": "Girder",
      "tag": "",
      "shape": "I-girder/precast",
      "material": "precast concrete",
      "count": null,
      "note": "Labeled 'PRECAST PSC GIRDER (TYP.)'; multiple girder segments shown along both spans"
    },
    {
      "name": "Bearing",
      "tag": "FR / FX",
      "shape": "pot bearing",
      "material": "elastomeric/PTFE-steel",
      "count": 6,
      "note": "Labeled 'POT-PTFE BEARING (TYP.)'; FR (free) at abutments and one side of pier, FX (fixed) at pier"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Labeled '1200Ø RCC CAST IN SITU PILE (TYP.)', shown under both abutments and pier in schematic cross-sections"
    },
    {
      "name": "Pile cap / foundation",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 3,
      "note": "Shown in plan-like sketches beneath A1, P1, A2 with pile spacing dimensions"
    },
    {
      "name": "Crash barrier",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Labeled 'RCC CRASH BARRIER' on both spans"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "300 THK, one at each abutment"
    },
    {
      "name": "PCC leveling course",
      "tag": "",
      "shape": "layer",
      "material": "plain cement concrete",
      "count": 2,
      "note": "150 THK, beneath approach slabs at both ends"
    },
    {
      "name": "Retaining wall",
      "tag": "",
      "shape": "sloped/independent",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Labeled 'INDEPENDENT RETAINING WALL' at both abutments"
    },
    {
      "name": "Stone pitching",
      "tag": "",
      "shape": "sloped surface treatment",
      "material": "stone",
      "count": 2,
      "note": "With 600 THK filter media beneath, at both abutment slopes"
    },
    {
      "name": "Launching apron",
      "tag": "",
      "shape": "sloped",
      "material": "unspecified",
      "count": 1,
      "note": "Labeled near A1 embankment slope"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "linear gap",
      "material": "",
      "count": 2,
      "note": "At centerline of A1 and A2, with EXP.GAP dimensions 80(SQ.)/92(SK)"
    },
    {
      "name": "Girder cross-section (typical)",
      "tag": "",
      "shape": "I-section/tapered flange",
      "material": "precast concrete",
      "count": 1,
      "note": "Shown separately as 'SURPORT SECTION (SCALE 1:50)' / 'CROSS SECTION OF PI...' (cut off), with dimensions 1000, 800, 2650"
    }
  ],
  "measurements": [
    {
      "label": "Span A1 to P1 (square)",
      "value": "40000",
      "unit": "",
      "appliesTo": "A1-P1 span"
    },
    {
      "label": "Span A1 to P1 (skew)",
      "value": "46188",
      "unit": "",
      "appliesTo": "A1-P1 span"
    },
    {
      "label": "Span P1 to A2 (skew)",
      "value": "46000",
      "unit": "",
      "appliesTo": "P1-A2 span"
    },
    {
      "label": "Span P1 to A2 (skew, alt)",
      "value": "46188",
      "unit": "",
      "appliesTo": "P1-A2 span"
    },
    {
      "label": "Expansion gap (square)",
      "value": "80",
      "unit": "",
      "appliesTo": "A1/A2 exp. joint"
    },
    {
      "label": "Expansion gap (skew)",
      "value": "92",
      "unit": "",
      "appliesTo": "A1/A2 exp. joint"
    },
    {
      "label": "Distance (square)",
      "value": "37761",
      "unit": "",
      "appliesTo": "span between bearing centerlines"
    },
    {
      "label": "Distance (skew)",
      "value": "43602",
      "unit": "",
      "appliesTo": "span between bearing centerlines"
    },
    {
      "label": "Offset (square)",
      "value": "1070",
      "unit": "",
      "appliesTo": "A1/A2 area"
    },
    {
      "label": "Offset (skew)",
      "value": "1236",
      "unit": "",
      "appliesTo": "A1/A2 area"
    },
    {
      "label": "Offset (square)",
      "value": "1170",
      "unit": "",
      "appliesTo": "P1 area"
    },
    {
      "label": "Offset (skew)",
      "value": "1350",
      "unit": "",
      "appliesTo": "P1 area"
    },
    {
      "label": "Approach slab thickness",
      "value": "300",
      "unit": "",
      "appliesTo": "approach slab"
    },
    {
      "label": "PCC leveling course thickness",
      "value": "150",
      "unit": "",
      "appliesTo": "PCC leveling course"
    },
    {
      "label": "Filter media thickness",
      "value": "600",
      "unit": "",
      "appliesTo": "independent retaining wall"
    },
    {
      "label": "HFL clearance minimum",
      "value": "1200",
      "unit": "",
      "appliesTo": "pier clearance to HFL"
    },
    {
      "label": "LWL",
      "value": "506.000",
      "unit": "m",
      "appliesTo": "pier P1 area"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "mm (Ø)",
      "appliesTo": "pile"
    },
    {
      "label": "Pile cap dimension",
      "value": "750",
      "unit": "",
      "appliesTo": "abutment/pier pile group"
    },
    {
      "label": "Pile cap dimension",
      "value": "3600",
      "unit": "",
      "appliesTo": "abutment/pier pile spacing"
    },
    {
      "label": "Pile cap total width",
      "value": "12300",
      "unit": "",
      "appliesTo": "abutment pile group A1/A2"
    },
    {
      "label": "Pier pile cap total",
      "value": "5100",
      "unit": "",
      "appliesTo": "pier P1 pile group"
    },
    {
      "label": "Pier cap width",
      "value": "1500",
      "unit": "(SK)",
      "appliesTo": "P1 pier cap"
    },
    {
      "label": "Cross section flange width",
      "value": "1000",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Cross section depth",
      "value": "2650",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Cross section bottom width",
      "value": "800",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Cross section top flange thickness",
      "value": "150",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Cross section web thickness",
      "value": "29",
      "unit": "",
      "appliesTo": "girder support section"
    },
    {
      "label": "Chainage LHS Point1",
      "value": "64+360.197",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage RHS Point1",
      "value": "64+371.487",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage LHS Point2",
      "value": "64+406.385",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage RHS Point2",
      "value": "64+417.675",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage LHS Point3",
      "value": "64+452.573",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "Chainage RHS Point3",
      "value": "64+463.814",
      "unit": "km",
      "appliesTo": "table"
    },
    {
      "label": "FRL LHS Point1",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL RHS Point1",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL LHS Point2",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL RHS Point2",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL LHS Point3",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "FRL RHS Point3",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level LHS Point1",
      "value": "509.560",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level RHS Point1",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level LHS Point2",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level RHS Point2",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level LHS Point3",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "table"
    },
    {
      "label": "Ground Level RHS Point3",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "table"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN ... OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIMEN... FOLLOWED.",
    "3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RESP... ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLAS... CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R -... 70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED",
    "5. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONEN... FOLLOWS:-"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "ELEVATION (SCALE 1:300)",
    "SURPORT SECTION (SCALE 1:50)",
    "CROSS SECTION OF PI...",
    "NOTES:",
    "A1",
    "P1",
    "A2",
    "FR",
    "FX",
    "£ OF EXP. JOINT",
    "£ OF BRG.",
    "DECK CONTINUITY",
    "LAUNCHING APRON",
    "STONE PITCHING",
    "INDEPENTENT RETAINING WALL",
    "INDEPENDENT RETAINING WALL",
    "300 THK. APPROACH SLAB",
    "150 THK. PCC LEVELING COURSE",
    "600 THK. FILTER MEDIA",
    "RCC CRASH BARRIER",
    "RCC COLUMN PIER (TYP.)",
    "1200Ø RCC CAST IN SITU PILE (TYP.)",
    "POT-PTFE BEARING (TYP.)",
    "PRECAST PSC GIRDER (TYP.)",
    "WALL TYPE ABUTMENT",
    "£ OF GIRDER"
  ],
  "description": "This crop shows the full elevation of a two-span bridge over a valley/river, with abutments A1 and A2 at either end and a single pier P1 at midspan, connected by precast PSC girders on POT-PTFE bearings (fixed at pier, free elsewhere). Below the elevation is a data table giving chainage, formation road level, and ground level at three points along the LHS and RHS of the carriageway, and to the right a partially visible general notes column (notes 1-5) covering dimension units, alignment reference, live load class (70R + traffic), and concrete grades, along with a separate typical girder support cross-section detail at the far right."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Overall pier assembly shown in Section B-B, including cap, column, pile cap and piles"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown at deck edges, height 230 dimensioned"
    },
    {
      "name": "Deck slab / deck continuity",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Continuity joint at centerline of bridge"
    },
    {
      "name": "Precast PSC girder",
      "tag": "TYP.",
      "shape": "tapered/I-section (hatched)",
      "material": "precast concrete",
      "count": 2,
      "note": "Shown both sides of pier, depth 2650"
    },
    {
      "name": "Pot-PTFE bearing",
      "tag": "TYP.",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "Located atop pier cap under girders"
    },
    {
      "name": "RCC seismic stopper",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Centered on pier cap between bearings"
    },
    {
      "name": "Pier cap / pier head",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Overall plan dimension 3640(SQ)/4203(SK), height 1500 split into two 750 segments"
    },
    {
      "name": "RCC column pier",
      "tag": "",
      "shape": "rectangular with chamfered corners",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Width 1500 shown in elevation; cross-section 1500x1000 with 25x25 chamfer shown separately"
    },
    {
      "name": "RCC pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Depth 1800, length 5100 (3600 between piles + 750 each side)"
    },
    {
      "name": "Bored cast-in-situ pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "1200 mm diameter piles under pile cap"
    }
  ],
  "measurements": [
    {
      "label": "Distance to bearing centerline (SQ)",
      "value": "1170",
      "unit": "",
      "appliesTo": "pier cap/bearing layout"
    },
    {
      "label": "Distance to bearing centerline (SK)",
      "value": "1350",
      "unit": "",
      "appliesTo": "pier cap/bearing layout"
    },
    {
      "label": "Crash barrier height",
      "value": "230",
      "unit": "",
      "appliesTo": "RCC crash barrier"
    },
    {
      "label": "Girder depth",
      "value": "2650",
      "unit": "",
      "appliesTo": "Precast PSC girder"
    },
    {
      "label": "Seismic stopper/bearing gap width (SK)",
      "value": "1500",
      "unit": "",
      "appliesTo": "RCC seismic stopper / pier cap"
    },
    {
      "label": "Pier cap height segment",
      "value": "750",
      "unit": "",
      "appliesTo": "Pier cap"
    },
    {
      "label": "Pier cap height segment (second)",
      "value": "750",
      "unit": "",
      "appliesTo": "Pier cap"
    },
    {
      "label": "Pier cap total height",
      "value": "1500",
      "unit": "",
      "appliesTo": "Pier cap"
    },
    {
      "label": "Pier cap plan dimension (SQ)",
      "value": "3640",
      "unit": "",
      "appliesTo": "Pier cap"
    },
    {
      "label": "Pier cap plan dimension (SK)",
      "value": "4203",
      "unit": "",
      "appliesTo": "Pier cap"
    },
    {
      "label": "Column width",
      "value": "1500",
      "unit": "",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "Pile cap depth",
      "value": "1800",
      "unit": "",
      "appliesTo": "RCC pile cap"
    },
    {
      "label": "Distance between piles",
      "value": "3600",
      "unit": "",
      "appliesTo": "RCC pile cap"
    },
    {
      "label": "Edge distance to pile",
      "value": "750",
      "unit": "",
      "appliesTo": "RCC pile cap"
    },
    {
      "label": "Pile cap total length",
      "value": "5100",
      "unit": "",
      "appliesTo": "RCC pile cap"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "",
      "appliesTo": "Bored cast-in-situ piles"
    },
    {
      "label": "Section width",
      "value": "1500",
      "unit": "",
      "appliesTo": "Section at pier location"
    },
    {
      "label": "Section depth",
      "value": "1000",
      "unit": "",
      "appliesTo": "Section at pier location"
    },
    {
      "label": "Chamfer size",
      "value": "25",
      "unit": "",
      "appliesTo": "Section at pier location (chamfer)"
    },
    {
      "label": "Chamfer size (second dimension)",
      "value": "25",
      "unit": "",
      "appliesTo": "Section at pier location (chamfer)"
    },
    {
      "label": "Scale of Section B-B",
      "value": "1:150",
      "unit": "",
      "appliesTo": "Section B-B"
    },
    {
      "label": "Scale of Section at Pier Location",
      "value": "1:25",
      "unit": "",
      "appliesTo": "Section at pier location"
    }
  ],
  "notes": [],
  "labels": [
    "P1",
    "℄ OF BRG.",
    "RCC CRASH BARRIER",
    "FRL",
    "DECK CONTINUITY",
    "PRECAST PSC GIRDER (TYP.)",
    "POT-PTFE BEARING (TYP.)",
    "RCC SEISMIC STOPPER",
    "RCC COLUMN PIER",
    "RCC PILECAP",
    "1200 DIA BORED CAST-IN-SITU PILES",
    "SECTION B-B",
    "(SCALE 1:150)",
    "SECTION AT PIER LOCATION",
    "(SCALE 1:25)",
    "CHAMFER 25X25"
  ],
  "description": "This crop shows two related structural sections for pier P1: a full-height Section B-B through the pier (from deck bearings down through the pier cap, column, pile cap and two bored piles) and a separate detail 'Section at Pier Location' showing the pier column's cross-sectional shape with chamfered corners. Dimensions cover crash barrier and girder depths, bearing spacing, pier cap and column sizes, pile cap dimensions, and pile diameter, documenting the concrete substructure elements supporting the superstructure at this pier."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Abutment",
      "tag": "A1",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at left end, near TO DEWAS side"
    },
    {
      "name": "Abutment",
      "tag": "A2",
      "shape": "wall type",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at right end, near TO KHANDWA side"
    },
    {
      "name": "Pier",
      "tag": "P1",
      "shape": "circular column",
      "material": "reinforced concrete",
      "count": 1,
      "note": "RCC column pier"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": null,
      "note": "1200mm dia RCC cast-in-situ pile (typ.), shown under P1 pile cap"
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 3,
      "note": "One under each abutment (A1, A2) and under pier P1"
    },
    {
      "name": "Bearing",
      "tag": "FR",
      "shape": "pot-PTFE",
      "material": "elastomeric/steel",
      "count": 4,
      "note": "Free/guided bearings, typical, at abutments and pier"
    },
    {
      "name": "Bearing",
      "tag": "FX",
      "shape": "pot-PTFE",
      "material": "elastomeric/steel",
      "count": 1,
      "note": "Fixed bearing at pier P1"
    },
    {
      "name": "Girder",
      "tag": "",
      "shape": "I-girder",
      "material": "precast concrete",
      "count": null,
      "note": "Precast PSC girder (typ.), multiple spans shown"
    },
    {
      "name": "Crash barrier",
      "tag": "",
      "shape": "rectangular profile",
      "material": "reinforced concrete",
      "count": 2,
      "note": "RCC crash barrier along both spans"
    },
    {
      "name": "Approach slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "300 thk. approach slab at both ends"
    },
    {
      "name": "PCC leveling course",
      "tag": "",
      "shape": "layer",
      "material": "plain cement concrete",
      "count": 2,
      "note": "150 thk. PCC leveling course beneath approach slabs"
    },
    {
      "name": "Deck continuity",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Deck continuity joint over pier P1"
    },
    {
      "name": "Retaining wall",
      "tag": "",
      "shape": "",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Independent retaining wall at both abutments"
    },
    {
      "name": "Stone pitching",
      "tag": "",
      "shape": "sloped surface",
      "material": "stone",
      "count": 2,
      "note": "Stone pitching with 600 thk. filter media at both approach slopes"
    },
    {
      "name": "Launching apron",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "Shown near abutment A1 slope"
    },
    {
      "name": "Expansion joint",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "At centerline of exp. joint near A1 and A2, gap 80(SQ) 92(SK)"
    },
    {
      "name": "Girder cross section",
      "tag": "",
      "shape": "tapered/I-section",
      "material": "precast concrete",
      "count": 1,
      "note": "Support section detail shown at right, scale 1:50"
    }
  ],
  "measurements": [
    {
      "label": "Span A1 to P1",
      "value": "40000(SQ) 46188(SK)",
      "unit": "mm",
      "appliesTo": "span between A1 and P1"
    },
    {
      "label": "Span P1 to A2",
      "value": "46000(SK) 46188(SK)",
      "unit": "mm",
      "appliesTo": "span between P1 and A2"
    },
    {
      "label": "Bearing to bearing distance",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": "left span, between bearing centerlines"
    },
    {
      "label": "Bearing to bearing distance",
      "value": "37761(SQ) 43602(SK)",
      "unit": "mm",
      "appliesTo": "right span, between bearing centerlines"
    },
    {
      "label": "Expansion gap",
      "value": "80(SQ) 92(SK)",
      "unit": "mm",
      "appliesTo": "expansion joint at A1"
    },
    {
      "label": "Expansion gap",
      "value": "80(SQ) 92(SK)",
      "unit": "mm",
      "appliesTo": "expansion joint at A2"
    },
    {
      "label": "Bearing offset",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "bearing near A1"
    },
    {
      "label": "Bearing offset",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "bearing near P1 (left side)"
    },
    {
      "label": "Bearing offset",
      "value": "1170(SQ) 1350(SK)",
      "unit": "mm",
      "appliesTo": "bearing near P1 (right side)"
    },
    {
      "label": "Bearing offset",
      "value": "1070(SQ) 1236(SK)",
      "unit": "mm",
      "appliesTo": "bearing near A2"
    },
    {
      "label": "Pier cap width",
      "value": "1500(SK)",
      "unit": "mm",
      "appliesTo": "P1 pier cap"
    },
    {
      "label": "HFL clearance",
      "value": "1200(min)",
      "unit": "mm",
      "appliesTo": "HFL level marker"
    },
    {
      "label": "LWL elevation",
      "value": "506.000",
      "unit": "m",
      "appliesTo": "Low Water Level"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "mm",
      "appliesTo": "RCC cast in situ pile at P1"
    },
    {
      "label": "Pile cap dimension (A1/A2)",
      "value": "750, 3600, 3600, 3600, 750",
      "unit": "mm",
      "appliesTo": "pile cap width breakdown at abutments"
    },
    {
      "label": "Pile cap total width (A1/A2)",
      "value": "12300",
      "unit": "mm",
      "appliesTo": "pile cap at abutments"
    },
    {
      "label": "Pile cap dimension (P1)",
      "value": "750, 3600, 750",
      "unit": "mm",
      "appliesTo": "pile cap width breakdown at pier"
    },
    {
      "label": "Pile cap total width (P1)",
      "value": "5100",
      "unit": "mm",
      "appliesTo": "pile cap at pier P1"
    },
    {
      "label": "Approach slab thickness",
      "value": "300",
      "unit": "mm",
      "appliesTo": "approach slab"
    },
    {
      "label": "PCC leveling course thickness",
      "value": "150",
      "unit": "mm",
      "appliesTo": "PCC leveling course"
    },
    {
      "label": "Filter media thickness",
      "value": "600",
      "unit": "mm",
      "appliesTo": "stone pitching filter media"
    },
    {
      "label": "Chainage LHS (A1)",
      "value": "64+360.197",
      "unit": "km",
      "appliesTo": "A1 LHS chainage"
    },
    {
      "label": "Chainage RHS (A1)",
      "value": "64+371.487",
      "unit": "km",
      "appliesTo": "A1 RHS chainage"
    },
    {
      "label": "Chainage LHS (P1)",
      "value": "64+406.385",
      "unit": "km",
      "appliesTo": "P1 LHS chainage"
    },
    {
      "label": "Chainage RHS (P1)",
      "value": "64+417.675",
      "unit": "km",
      "appliesTo": "P1 RHS chainage"
    },
    {
      "label": "Chainage LHS (A2)",
      "value": "64+452.573",
      "unit": "km",
      "appliesTo": "A2 LHS chainage"
    },
    {
      "label": "Chainage RHS (A2)",
      "value": "64+463.814",
      "unit": "km",
      "appliesTo": "A2 RHS chainage"
    },
    {
      "label": "FRL LHS (A1)",
      "value": "518.281",
      "unit": "m",
      "appliesTo": "A1 main carriageway LHS"
    },
    {
      "label": "FRL RHS (A1)",
      "value": "518.465",
      "unit": "m",
      "appliesTo": "A1 main carriageway RHS"
    },
    {
      "label": "FRL LHS (P1)",
      "value": "519.033",
      "unit": "m",
      "appliesTo": "P1 main carriageway LHS"
    },
    {
      "label": "FRL RHS (P1)",
      "value": "519.217",
      "unit": "m",
      "appliesTo": "P1 main carriageway RHS"
    },
    {
      "label": "FRL LHS (A2)",
      "value": "519.785",
      "unit": "m",
      "appliesTo": "A2 main carriageway LHS"
    },
    {
      "label": "FRL RHS (A2)",
      "value": "519.968",
      "unit": "m",
      "appliesTo": "A2 main carriageway RHS"
    },
    {
      "label": "Ground level LHS (A1)",
      "value": "509.560",
      "unit": "m",
      "appliesTo": "A1 LHS ground level"
    },
    {
      "label": "Ground level RHS (A1)",
      "value": "509.155",
      "unit": "m",
      "appliesTo": "A1 RHS ground level"
    },
    {
      "label": "Ground level LHS (P1)",
      "value": "503.816",
      "unit": "m",
      "appliesTo": "P1 LHS ground level"
    },
    {
      "label": "Ground level RHS (P1)",
      "value": "503.883",
      "unit": "m",
      "appliesTo": "P1 RHS ground level"
    },
    {
      "label": "Ground level LHS (A2)",
      "value": "511.891",
      "unit": "m",
      "appliesTo": "A2 LHS ground level"
    },
    {
      "label": "Ground level RHS (A2)",
      "value": "512.668",
      "unit": "m",
      "appliesTo": "A2 RHS ground level"
    },
    {
      "label": "Support section width",
      "value": "800",
      "unit": "mm",
      "appliesTo": "girder cross section base"
    },
    {
      "label": "Support section top width",
      "value": "1000",
      "unit": "mm",
      "appliesTo": "girder cross section top"
    },
    {
      "label": "Support section height",
      "value": "2650",
      "unit": "mm",
      "appliesTo": "girder cross section overall height"
    },
    {
      "label": "Support section top flange thickness",
      "value": "150",
      "unit": "mm",
      "appliesTo": "girder cross section"
    },
    {
      "label": "Support section web thickness",
      "value": "29",
      "unit": "mm",
      "appliesTo": "girder cross section web"
    },
    {
      "label": "Slope ratio",
      "value": "2:1",
      "unit": "",
      "appliesTo": "approach embankment slope near A1 and A2"
    }
  ],
  "notes": [
    "1. ALL DIMENSIONS ARE IN MILLIMETERS AND LEVELS ARE IN...OTHERWISE SPECIFIED.",
    "2. DIMENSIONS ARE NOT TO BE SCALED. ONLY WRITTEN DIM...FOLLOWED.",
    "3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH RES...ALIGNMENT DRAWINGS.",
    "4. THE BRIDGE HAS BEEN DESIGNED FOR FOUR LANE OF CLA...CLASS 70R + TWO LANE OF CLASS A, ONE LANE OF 70R...70R OR SV LOADING WHICHEVER GOVERNS, IS CONSIDERED.",
    "5. GRADE OF CONCRETE FOR VARIOUS STRUCTURAL COMPONE...FOLLOWS:-"
  ],
  "labels": [
    "TO DEWAS",
    "TO KHANDWA",
    "É OF EXP. JOINT",
    "É OF BRG.",
    "RCC CRASH BARRIER",
    "DECK CONTINUITY",
    "POT-PTFE BEARING (TYP.)",
    "RCC COLUMN PIER (TYP.)",
    "PRECAST PSC GIRDER (TYP.)",
    "WALL TYPE ABUTMENT",
    "LAUNCHING APRON",
    "1200∅ RCC CAST IN SITU PILE (TYP.)",
    "INDEPENDENT RETAINING WALL",
    "STONE PITCHING",
    "600 THK. FILTER MEDIA",
    "300 THK. APPROACH SLAB",
    "150 THK. PCC LEVELING COURSE",
    "HFL=",
    "LWL=506.000m",
    "ELEVATION (SCALE 1:300)",
    "SURPORT SECTION (SCALE 1:50)",
    "CROSS SECTION OF ...",
    "É OF GIRDER",
    "CHAINAGE IN (km.)",
    "FRL. (m)",
    "MAIN CARRIAGEWAY",
    "GROUND LEVEL (m)",
    "LHS",
    "RHS",
    "NOTES:"
  ],
  "description": "This crop shows the longitudinal elevation of a two-span bridge (scale 1:300) between abutments A1 and A2 with a central pier P1, including span dimensions, bearing types (FR/FX pot-PTFE bearings), precast PSC girders, RCC crash barriers, approach slabs, retaining walls, stone pitching, and pile/pile cap details. Below the elevation is a chainage/level data table for LHS and RHS at each support, and to the right is a girder support cross-section detail (scale 1:50) with a partial general notes block."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "Pier cap / pier bearing seat",
      "tag": "P1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Cap supporting bearings and seismic stopper, shown at top of column pier"
    },
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "Shown atop deck on both sides"
    },
    {
      "name": "Precast PSC girder",
      "tag": "",
      "shape": "tapered/I-section (haunched)",
      "material": "precast concrete",
      "count": 2,
      "note": "Typical girder either side of pier centerline"
    },
    {
      "name": "Deck slab with deck continuity joint",
      "tag": "",
      "shape": "flat slab",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Continuity over pier"
    },
    {
      "name": "Pot-PTFE bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "elastomeric/PTFE composite",
      "count": 2,
      "note": "Typical bearing, one per girder line"
    },
    {
      "name": "RCC seismic stopper",
      "tag": "",
      "shape": "rectangular block",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located between bearings at pier cap"
    },
    {
      "name": "RCC column pier",
      "tag": "",
      "shape": "rectangular/circular column",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Single column shaft below pier cap"
    },
    {
      "name": "RCC pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bored cast-in-situ pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "1200 dia piles shown in section, part of larger group"
    },
    {
      "name": "Chamfer detail",
      "tag": "SECTION A",
      "shape": "rectangular with chamfered corner",
      "material": "concrete",
      "count": 1,
      "note": "Shown in adjacent small detail, partially cropped"
    }
  ],
  "measurements": [
    {
      "label": "Distance from bearing centerline to edge (SQ)",
      "value": "1170",
      "unit": "mm",
      "appliesTo": "deck/pier cap"
    },
    {
      "label": "Distance from bearing centerline to edge (SK)",
      "value": "1350",
      "unit": "mm",
      "appliesTo": "deck/pier cap"
    },
    {
      "label": "Barrier height",
      "value": "230",
      "unit": "mm",
      "appliesTo": "RCC crash barrier"
    },
    {
      "label": "Girder depth",
      "value": "2650",
      "unit": "mm",
      "appliesTo": "Precast PSC girder"
    },
    {
      "label": "Bearing seat width (SK)",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "pier cap/bearing area"
    },
    {
      "label": "Pier cap layer thickness",
      "value": "750",
      "unit": "mm",
      "appliesTo": "pier cap"
    },
    {
      "label": "Pier cap layer thickness",
      "value": "750",
      "unit": "mm",
      "appliesTo": "pier cap"
    },
    {
      "label": "Total pier cap depth",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "pier cap"
    },
    {
      "label": "Pier cap width (SQ)",
      "value": "3640",
      "unit": "mm",
      "appliesTo": "pier cap"
    },
    {
      "label": "Pier cap width (SK)",
      "value": "4203",
      "unit": "mm",
      "appliesTo": "pier cap"
    },
    {
      "label": "Column width",
      "value": "1500",
      "unit": "mm",
      "appliesTo": "RCC column pier"
    },
    {
      "label": "Pile cap thickness",
      "value": "1800",
      "unit": "mm",
      "appliesTo": "RCC pile cap"
    },
    {
      "label": "Edge distance to pile",
      "value": "750",
      "unit": "mm",
      "appliesTo": "pile cap"
    },
    {
      "label": "Pile spacing",
      "value": "3600",
      "unit": "mm",
      "appliesTo": "piles"
    },
    {
      "label": "Overall pile cap width",
      "value": "5100",
      "unit": "mm",
      "appliesTo": "pile cap"
    },
    {
      "label": "Edge distance to pile",
      "value": "750",
      "unit": "mm",
      "appliesTo": "pile cap"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "mm",
      "appliesTo": "bored cast-in-situ piles"
    },
    {
      "label": "Chamfer dimension",
      "value": "25",
      "unit": "mm",
      "appliesTo": "Section A chamfer detail"
    },
    {
      "label": "Chamfer dimension",
      "value": "25",
      "unit": "mm",
      "appliesTo": "Section A chamfer detail"
    },
    {
      "label": "Scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "Section B-B"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "FRL",
    "DECK CONTINUITY",
    "PRECAST PSC GIRDER (TYP.)",
    "RCC SEISMIC STOPPER",
    "POT-PTFE BEARING (TYP.)",
    "RCC COLUMN PIER",
    "RCC PILECAP",
    "1200 DIA BORED CAST-IN-SITU PILES",
    "CHAMFER"
  ],
  "labels": [
    "P1",
    "C OF BRG.",
    "SECTION A",
    "SECTION B-B",
    "(SCALE 1:150)",
    "(SC..."
  ],
  "description": "This crop shows Section B-B, a cross section through a bridge pier (P1) at scale 1:150, illustrating the deck, PSC girders, crash barriers, pot-PTFE bearings, seismic stopper, pier cap, RCC column pier, pile cap, and two of the bored cast-in-situ piles with their spacing dimensions. A partial adjacent detail labeled 'SECTION A' shows a chamfer detail at a concrete edge, cut off at the right margin of the crop."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Crash Barrier",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "labeled RCC CRASH BARRIER, on either side of deck"
    },
    {
      "name": "PSC Girder",
      "tag": "",
      "shape": "I-girder/tapered",
      "material": "precast concrete",
      "count": 2,
      "note": "labeled PRECAST PSC GIRDER (TYP.), shown schematically hatched"
    },
    {
      "name": "Deck Continuity Slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "deck continuity at pier top"
    },
    {
      "name": "Bearing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "POT-PTFE BEARING (TYP.)"
    },
    {
      "name": "Seismic Stopper",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "RCC SEISMIC STOPPER, hatched block at pier cap top"
    },
    {
      "name": "Pier Cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "cap supporting bearings above column"
    },
    {
      "name": "Column Pier",
      "tag": "P1",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "labeled RCC COLUMN PIER"
    },
    {
      "name": "Pile Cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "labeled RCC PILECAP, shown dashed (below ground/hidden)"
    },
    {
      "name": "Bored Cast-in-situ Pile",
      "tag": "",
      "shape": "circular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "labeled 1200 DIA BORED CAST-IN-SITU PILES, shown dashed"
    }
  ],
  "measurements": [
    {
      "label": "Barrier width offset",
      "value": "230",
      "unit": "",
      "appliesTo": "Crash Barrier (each side)"
    },
    {
      "label": "Girder depth",
      "value": "2650",
      "unit": "",
      "appliesTo": "PSC Girder"
    },
    {
      "label": "Bearing spacing (square)",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "C OF BRG. spacing left"
    },
    {
      "label": "Bearing spacing (skew)",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "C OF BRG. spacing left"
    },
    {
      "label": "Bearing spacing (square)",
      "value": "1170(SQ)",
      "unit": "",
      "appliesTo": "C OF BRG. spacing right"
    },
    {
      "label": "Bearing spacing (skew)",
      "value": "1350(SK)",
      "unit": "",
      "appliesTo": "C OF BRG. spacing right"
    },
    {
      "label": "Seismic stopper width (skew)",
      "value": "1500(SK)",
      "unit": "",
      "appliesTo": "RCC Seismic Stopper"
    },
    {
      "label": "Pier cap depth upper",
      "value": "750",
      "unit": "",
      "appliesTo": "Pier Cap"
    },
    {
      "label": "Pier cap depth lower",
      "value": "750",
      "unit": "",
      "appliesTo": "Pier Cap"
    },
    {
      "label": "Pier cap total depth",
      "value": "1500",
      "unit": "",
      "appliesTo": "Pier Cap"
    },
    {
      "label": "Pier cap width (square)",
      "value": "3640(SQ)",
      "unit": "",
      "appliesTo": "Pier Cap"
    },
    {
      "label": "Pier cap width (skew)",
      "value": "4203(SK)",
      "unit": "",
      "appliesTo": "Pier Cap"
    },
    {
      "label": "Column diameter",
      "value": "1500",
      "unit": "",
      "appliesTo": "Column Pier P1"
    },
    {
      "label": "Pile cap depth",
      "value": "1800",
      "unit": "",
      "appliesTo": "Pile Cap"
    },
    {
      "label": "Pile edge distance left",
      "value": "750",
      "unit": "",
      "appliesTo": "Pile Cap"
    },
    {
      "label": "Pile spacing",
      "value": "3600",
      "unit": "",
      "appliesTo": "Bored Piles"
    },
    {
      "label": "Pile edge distance right",
      "value": "750",
      "unit": "",
      "appliesTo": "Pile Cap"
    },
    {
      "label": "Pile cap overall width",
      "value": "5100",
      "unit": "",
      "appliesTo": "Pile Cap"
    },
    {
      "label": "Pile diameter",
      "value": "1200",
      "unit": "DIA",
      "appliesTo": "Bored Cast-in-situ Piles"
    }
  ],
  "notes": [
    "RCC CRASH BARRIER",
    "FRL",
    "DECK CONTINUITY",
    "RCC SEISMIC STOPPER",
    "POT-PTFE BEARING (TYP.)",
    "PRECAST PSC GIRDER (TYP.)",
    "RCC COLUMN PIER",
    "RCC PILECAP",
    "1200 DIA BORED CAST-IN-SITU PILES"
  ],
  "labels": [
    "P1",
    "C OF BRG."
  ],
  "description": "This crop is an elevation view of a bridge pier (marked P1) showing the deck cross-section above with crash barriers, precast PSC girders, deck continuity slab, pot-PTFE bearings and seismic stopper, resting on a pier cap supported by a single circular RCC column pier. Below ground, the column continues to a pile cap (shown dashed/hidden) founded on two 1200mm diameter bored cast-in-situ piles. Key dimensions for bearing spacing, pier cap size (square and skew), column diameter, pile cap dimensions, and pile spacing are annotated."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "tapered/rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one at each outer edge of deck"
    },
    {
      "name": "footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "located between crash barrier and carriageway on each side"
    },
    {
      "name": "RCC cast-in-situ deck slab",
      "tag": "",
      "shape": "slab with 2.5% cross slope",
      "material": "reinforced concrete",
      "count": 1,
      "note": "spans full width, shown with wearing course on top"
    },
    {
      "name": "wearing course",
      "tag": "",
      "shape": "layer, 50mm thick",
      "material": "asphalt/bituminous (WC)",
      "count": 1,
      "note": "50mm THK. WC over deck, both carriageways"
    },
    {
      "name": "cantilever median wall",
      "tag": "",
      "shape": "rectangular, cantilevered",
      "material": "concrete",
      "count": 1,
      "note": "located at centerline of proposed road, between the two carriageways"
    },
    {
      "name": "expansion/sealant gap",
      "tag": "",
      "shape": "20mm gap",
      "material": "polysulphide sealant",
      "count": 1,
      "note": "20mm gap filled with polysulphide sealant, near median"
    },
    {
      "name": "pile cap",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "one under each abutment (A1 side and A2 side), width 16550 each"
    },
    {
      "name": "pile",
      "tag": "",
      "shape": "square/circular in plan (shown as dashed boxes with cross symbol)",
      "material": "reinforced concrete (cast-in-situ, presumed)",
      "count": null,
      "note": "multiple piles shown in a row under each pile cap; exact count not clearly determinable due to symbol overlap, appears as repeating pattern of 5 positions per cap"
    },
    {
      "name": "PCC blinding/leveling layer",
      "tag": "PCC M-15",
      "shape": "layer",
      "material": "PCC M-15",
      "count": 1,
      "note": "below pile cap, labeled PCC M-15"
    },
    {
      "name": "embankment/slope fill",
      "tag": "",
      "shape": "sloped fill (2:1 shown as 1/2)",
      "material": "earth fill (implied)",
      "count": 2,
      "note": "shown schematically as hatched slope lines beyond ROW on both sides"
    }
  ],
  "measurements": [
    {
      "label": "ROW total width",
      "value": "80000",
      "unit": "",
      "appliesTo": "overall right-of-way"
    },
    {
      "label": "ROW half width",
      "value": "40000",
      "unit": "",
      "appliesTo": "each side of centerline"
    },
    {
      "label": "Deck half width",
      "value": "16550",
      "unit": "",
      "appliesTo": "deck/pile cap width each side"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "each carriageway (LHS and RHS)"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "footpath each side"
    },
    {
      "label": "Crash barrier width",
      "value": "450",
      "unit": "",
      "appliesTo": "crash barrier each side"
    },
    {
      "label": "Edge offset",
      "value": "450",
      "unit": "",
      "appliesTo": "between crash barrier and footpath/deck edge"
    },
    {
      "label": "Median width",
      "value": "2900",
      "unit": "",
      "appliesTo": "centerline gap between carriageways"
    },
    {
      "label": "FRL offset",
      "value": "100",
      "unit": "",
      "appliesTo": "FRL marks near median"
    },
    {
      "label": "Wearing course thickness",
      "value": "50",
      "unit": "mm",
      "appliesTo": "WC layer on deck"
    },
    {
      "label": "Deck cross slope",
      "value": "2.5",
      "unit": "%",
      "appliesTo": "deck slab slope"
    },
    {
      "label": "Sealant gap width",
      "value": "20",
      "unit": "mm",
      "appliesTo": "gap at median, polysulphide sealant"
    },
    {
      "label": "Pile cap depth reference",
      "value": "1000",
      "unit": "",
      "appliesTo": "vertical dimension near pile cap top"
    },
    {
      "label": "Pile spacing pattern",
      "value": "1275 / 3500 / 3500 / 3500 / 3500 / 1275",
      "unit": "",
      "appliesTo": "spacing across deck section (upper girder/beam grid)"
    },
    {
      "label": "Pile cap plan spacing",
      "value": "775 / 3750 / 3750 / 3750 / 3750 / 775",
      "unit": "",
      "appliesTo": "pile cap width breakdown, each abutment"
    },
    {
      "label": "ACTL A1 L/S",
      "value": "514.674",
      "unit": "",
      "appliesTo": "Abutment cap top level, A1 left side"
    },
    {
      "label": "ACTL A2 L/S",
      "value": "516.136",
      "unit": "",
      "appliesTo": "Abutment cap top level, A2 left side"
    },
    {
      "label": "ACTL A1 R/S",
      "value": "514.839",
      "unit": "",
      "appliesTo": "Abutment cap top level, A1 right side"
    },
    {
      "label": "ACTL A2 R/S",
      "value": "516.318",
      "unit": "",
      "appliesTo": "Abutment cap top level, A2 right side"
    },
    {
      "label": "PCTL A1 L/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level, A1 left side"
    },
    {
      "label": "PCTL A2 L/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level, A2 left side"
    },
    {
      "label": "PCTL A1 R/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level, A1 right side"
    },
    {
      "label": "PCTL A2 R/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level, A2 right side"
    },
    {
      "label": "PCBL A1 L/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A1 left side"
    },
    {
      "label": "PCBL A2 L/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A2 left side"
    },
    {
      "label": "PCBL A1 R/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A1 right side"
    },
    {
      "label": "PCBL A2 R/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level, A2 right side"
    },
    {
      "label": "PILE TIP LVL A1 L/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile tip level, A1 left side"
    },
    {
      "label": "PILE TIP LVL A2 L/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile tip level, A2 left side"
    },
    {
      "label": "PILE TIP LVL A1 R/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile tip level, A1 right side"
    },
    {
      "label": "PILE TIP LVL A2 R/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile tip level, A2 right side"
    },
    {
      "label": "Slope symbol",
      "value": "2:1",
      "unit": "",
      "appliesTo": "embankment slope, both sides"
    },
    {
      "label": "Scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "Section at Abutment Location at A1 & A2"
    }
  ],
  "notes": [
    "50mm THK. (WC)",
    "RCC CAST IN SITU DECK SLOPE 2.5%",
    "20mm GAP FILLED WITH POLYSULPHIDE SEALANT",
    "CANTILEVER MEDIAN WALL",
    "PCC M-15"
  ],
  "labels": [
    "SECTION AT ABUTMENT LOCATION AT A1 & A2",
    "(SCALE 1:150)",
    "ROW",
    "€ OF PROPOSED ROAD",
    "€ OF LHS (CARRIAGEWAY)",
    "€ OF RHS (CARRIAGEWAY)",
    "FRL",
    "RCC CRASH BARRIER",
    "FOOTPATH"
  ],
  "description": "This crop is a cross section of a bridge deck taken at the abutment locations A1 and A2, showing the full 80m right-of-way with two carriageways, footpaths, crash barriers, a central cantilever median wall, and the deck slab with wearing course and cross slope. Below the deck, the section shows the pile cap layout with rows of piles under each abutment along with reference elevations (ACTL, PCTL, PCBL, pile tip levels) for both the A1 and A2 abutments, left and right sides. It is primarily a substructure/superstructure combined cross section documenting deck geometry, pile cap dimensions, and key design elevations rather than a single component detail."
}

{
  "view": "Cross Section",
  "objects": [
    {
      "name": "RCC crash barrier",
      "tag": "",
      "shape": "tapered/trapezoidal",
      "material": "reinforced concrete",
      "count": 4,
      "note": "Two outer barriers on each carriageway edge, slope 2:1 shown"
    },
    {
      "name": "Cantilever median wall",
      "tag": "",
      "shape": "rectangular/tapered",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Located at centre gap between the two carriageways, with 20mm gap filled with polysulphide sealant"
    },
    {
      "name": "Footpath",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete (implied)",
      "count": 2,
      "note": "1500mm wide footpath on each outer edge"
    },
    {
      "name": "RCC cast-in-situ deck slab",
      "tag": "",
      "shape": "slab, cambered/sloped",
      "material": "reinforced concrete",
      "count": 2,
      "note": "One per carriageway, slope 2.5% shown, 100mm deck thickness noted at crown"
    },
    {
      "name": "Wearing coat",
      "tag": "",
      "shape": "layer",
      "material": "asphalt/wearing course (WC)",
      "count": 2,
      "note": "50mm thick wearing coat over deck slab, one per carriageway"
    },
    {
      "name": "Girder/bearing line",
      "tag": "",
      "shape": "symbolic marks under deck",
      "material": "",
      "count": 10,
      "note": "5 support/bearing marks per carriageway at 3500mm spacing (1275+3500x4+1275=16550); likely PSC girder positions, not explicitly labelled"
    },
    {
      "name": "Pile cap",
      "tag": "",
      "shape": "rectangular (dashed outline)",
      "material": "reinforced concrete",
      "count": 10,
      "note": "5 pile cap groups per carriageway side spaced at 3750mm c/c, 775mm edge distance, total width 16550mm; levels PCTL and PCBL given"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "circular (shown as cross symbols in group)",
      "material": "reinforced concrete",
      "count": null,
      "note": "Groups of piles shown under each pile cap; exact count per cap not clearly countable from symbols, spacing 1000mm shown"
    },
    {
      "name": "PCC blinding/leveling course",
      "tag": "M-15",
      "shape": "layer",
      "material": "plain cement concrete (M-15 grade)",
      "count": 1,
      "note": "Shown at median/cantilever wall foundation area"
    },
    {
      "name": "Embankment / slope protection",
      "tag": "",
      "shape": "sloped, riprap hatch pattern",
      "material": "stone/rock pitching (implied)",
      "count": 2,
      "note": "Shown on both outer sides beyond ROW line, sloped embankment with rock protection"
    }
  ],
  "measurements": [
    {
      "label": "Total ROW width",
      "value": "80000",
      "unit": "",
      "appliesTo": "overall section"
    },
    {
      "label": "Half ROW width",
      "value": "40000",
      "unit": "",
      "appliesTo": "each side"
    },
    {
      "label": "Deck width",
      "value": "16550",
      "unit": "",
      "appliesTo": "each carriageway deck (top)"
    },
    {
      "label": "Deck width (bottom/pile cap)",
      "value": "16550",
      "unit": "",
      "appliesTo": "pile cap group width"
    },
    {
      "label": "Carriageway width",
      "value": "13500",
      "unit": "",
      "appliesTo": "CARRIAGEWAY"
    },
    {
      "label": "Footpath width",
      "value": "1500",
      "unit": "",
      "appliesTo": "FOOTPATH"
    },
    {
      "label": "Edge offset",
      "value": "450",
      "unit": "",
      "appliesTo": "barrier/footpath edge, repeated multiple locations"
    },
    {
      "label": "Deck thickness at crown",
      "value": "100",
      "unit": "",
      "appliesTo": "deck slab"
    },
    {
      "label": "Median gap width",
      "value": "2900",
      "unit": "",
      "appliesTo": "gap between carriageways at centre"
    },
    {
      "label": "Wearing coat thickness",
      "value": "50mm",
      "unit": "mm",
      "appliesTo": "WC layer"
    },
    {
      "label": "Deck slope",
      "value": "2.5",
      "unit": "%",
      "appliesTo": "RCC cast in situ deck"
    },
    {
      "label": "Girder/bearing spacing",
      "value": "750",
      "unit": "",
      "appliesTo": "spacing marks near crown"
    },
    {
      "label": "Bearing/girder line spacing",
      "value": "1275",
      "unit": "",
      "appliesTo": "outer spacing"
    },
    {
      "label": "Bearing/girder line spacing",
      "value": "3500",
      "unit": "",
      "appliesTo": "repeated 4 times per side"
    },
    {
      "label": "Pile spacing",
      "value": "1000",
      "unit": "",
      "appliesTo": "pile group spacing, multiple locations"
    },
    {
      "label": "Gap fill thickness",
      "value": "20mm",
      "unit": "mm",
      "appliesTo": "polysulphide sealant gap at median"
    },
    {
      "label": "Pile cap spacing",
      "value": "3750",
      "unit": "",
      "appliesTo": "pile cap centers, repeated 4 times per side"
    },
    {
      "label": "Pile cap edge distance",
      "value": "775",
      "unit": "",
      "appliesTo": "pile cap outer edge"
    },
    {
      "label": "ACTL A1 L/S",
      "value": "514.674",
      "unit": "",
      "appliesTo": "Abutment cap top level A1 left side"
    },
    {
      "label": "ACTL A2 L/S",
      "value": "516.136",
      "unit": "",
      "appliesTo": "Abutment cap top level A2 left side"
    },
    {
      "label": "ACTL A1 R/S",
      "value": "514.839",
      "unit": "",
      "appliesTo": "Abutment cap top level A1 right side"
    },
    {
      "label": "ACTL A2 R/S",
      "value": "516.318",
      "unit": "",
      "appliesTo": "Abutment cap top level A2 right side"
    },
    {
      "label": "PCTL A1 L/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level A1 left side"
    },
    {
      "label": "PCTL A2 L/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level A2 left side"
    },
    {
      "label": "PCTL A1 R/S",
      "value": "508.655",
      "unit": "",
      "appliesTo": "Pile cap top level A1 right side"
    },
    {
      "label": "PCTL A2 R/S",
      "value": "511.391",
      "unit": "",
      "appliesTo": "Pile cap top level A2 right side"
    },
    {
      "label": "PCBL A1 L/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level A1 left side"
    },
    {
      "label": "PCBL A2 L/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level A2 left side"
    },
    {
      "label": "PCBL A1 R/S",
      "value": "506.855",
      "unit": "",
      "appliesTo": "Pile cap bottom level A1 right side"
    },
    {
      "label": "PCBL A2 R/S",
      "value": "509.591",
      "unit": "",
      "appliesTo": "Pile cap bottom level A2 right side"
    },
    {
      "label": "Pile tip level A1 L/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile A1 left side"
    },
    {
      "label": "Pile tip level A2 L/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile A2 left side"
    },
    {
      "label": "Pile tip level A1 R/S",
      "value": "481.905",
      "unit": "",
      "appliesTo": "Pile A1 right side"
    },
    {
      "label": "Pile tip level A2 R/S",
      "value": "484.641",
      "unit": "",
      "appliesTo": "Pile A2 right side"
    },
    {
      "label": "Scale",
      "value": "1:150",
      "unit": "",
      "appliesTo": "section drawing"
    }
  ],
  "notes": [
    "50mm THK. (WC)",
    "RCC CAST IN SITU DECK SLOPE 2.5%",
    "RCC CRASH BARRIER",
    "20mm GAP FILLED WITH POLYSULPHIDE SEALANT",
    "CANTILEVER MEDIAN WALL",
    "PCC M-15"
  ],
  "labels": [
    "SECTION AT ABUTMENT LOCATION AT A1 & A2",
    "(SCALE 1:150)",
    "80000 ROW",
    "C OF PROPOSED ROAD",
    "C OF LHS (CARRIAGEWAY)",
    "C OF RHS (CARRIAGEWAY)",
    "FRL",
    "FOOTPATH",
    "ROW",
    "A",
    "B"
  ],
  "description": "This crop shows a full cross section titled 'SECTION AT ABUTMENT LOCATION AT A1 & A2' (scale 1:150) through a dual-carriageway bridge, depicting both carriageways, footpaths, RCC crash barriers, a cantilever median wall with sealed gap, cast-in-situ RCC deck slabs with wearing coat, girder/bearing lines, and the abutment pile caps with pile groups below embankment level on both sides. Numerous elevation levels (ACTL, PCTL, PCBL, pile tip levels) for abutments A1 and A2 on left and right sides (L/S, R/S) are annotated, along with detailed dimensions of carriageway, footpath, girder spacing, and pile cap layout. A second section (marked 'B') begins to appear at the bottom edge of the crop but is cut off."
}