GDOT17

{
  "view": "Section",
  "objects": [
    {
      "name": "outer frame",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner frame opening",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolt holes (top row)",
      "tag": "",
      "shape": "circular",
      "material": "unknown",
      "count": 4,
      "note": "holes along top inner edge"
    },
    {
      "name": "bolt holes (bottom row)",
      "tag": "",
      "shape": "circular",
      "material": "unknown",
      "count": 2,
      "note": "two holes for 2-445 SERIES"
    },
    {
      "name": "support braces",
      "tag": "",
      "shape": "diagonal brace",
      "material": "unknown",
      "count": 2,
      "note": "triangular braces from bottom holes toward center"
    },
    {
      "name": "centerline",
      "tag": "",
      "shape": "dashed line",
      "material": "unknown",
      "count": 1,
      "note": "centerline reference"
    }
  ],
  "measurements": [
    {
      "label": "outer width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "outer frame width"
    },
    {
      "label": "left segment to centerline",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "horizontal distance to centerline"
    },
    {
      "label": "right segment to centerline",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "horizontal distance to centerline"
    },
    {
      "label": "clear sides",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "sides clear"
    },
    {
      "label": "vertical clearance min",
      "value": "2'-0\"",
      "unit": "ft-in",
      "appliesTo": "vertical minimum clearance"
    },
    {
      "label": "centerline vertical clearance min",
      "value": "2'-0\"",
      "unit": "ft-in",
      "appliesTo": "vertical minimum clearance to centerline"
    },
    {
      "label": "inner opening width",
      "value": "4-1040",
      "unit": "",
      "appliesTo": "inner opening width"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B"
  ],
  "description": "Section B-B through a rectangular frame with an inner opening. The drawing shows an outer frame, an inner frame opening, six bolt holes (top row of four and bottom row of two for the 2-445 series), two diagonal support braces, and a centerline reference. Distances indicate 3'-0\" overall width, 1'-6\" left and right to the centerline, 2\" clear sides on three sides, and minimum vertical clearances of 2'-0\"."
}

{
  "view": "Title Block",
  "objects": [
    {
      "name": "Seal",
      "tag": "",
      "shape": "circular",
      "material": "printed seal",
      "count": 1,
      "note": "Georgia Registered Professional Engineer stamp"
    },
    {
      "name": "Title Block (header area)",
      "tag": "",
      "shape": "rectangular",
      "material": "title block",
      "count": 1,
      "note": "GEORGIA DEPARTMENT OF TRANSPORTATION; ENGINEERING DIVISION- OFFICE OF BRIDGES AND STRUCTURES; SASTRY & ASSOCIATES, INC."
    },
    {
      "name": "End Bent",
      "tag": "",
      "shape": "text",
      "material": "concrete",
      "count": 1,
      "note": "END BENT 4"
    }
  ],
  "measurements": [
    {
      "label": "SCALE",
      "value": "1/4\" = 1'-0\"",
      "unit": "scale",
      "appliesTo": "TITLE BLOCK"
    },
    {
      "label": "DRAWING NO.",
      "value": "35-0017",
      "unit": "",
      "appliesTo": "TITLE BLOCK"
    },
    {
      "label": "BRIDGE SHEET",
      "value": "17 OF 21",
      "unit": "",
      "appliesTo": "TITLE BLOCK"
    },
    {
      "label": "DATE",
      "value": "MAY 2025",
      "unit": "",
      "appliesTo": "TITLE BLOCK"
    },
    {
      "label": "END BENT",
      "value": "4",
      "unit": "",
      "appliesTo": "TITLE BLOCK"
    },
    {
      "label": "PROJECT",
      "value": "SR 21 @ NS #620272Y",
      "unit": "",
      "appliesTo": "TITLE BLOCK"
    },
    {
      "label": "COUNTY",
      "value": "JENKINS COUNTY",
      "unit": "",
      "appliesTo": "TITLE BLOCK"
    }
  ],
  "notes": [
    "1 INCH WHEN PRINTED FULL SIZE"
  ],
  "labels": [
    "BRIDGE NO. LT. AND RT.",
    "SASTRY & ASSOCIATES, INC.",
    "GEORGIA DEPARTMENT OF TRANSPORTATION",
    "ENGINEERING DIVISION- OFFICE OF BRIDGES AND STRUCTURES",
    "BRIDGE SHEET 17 OF 21",
    "DRAWING NO. 35-0017",
    "END BENT 4",
    "SR 21 @ NS #620272Y",
    "JENKINS COUNTY",
    "SCALE: 1/4\" = 1'-0\" (UNLESS OTHERWISE NOTED) MAY 2025"
  ],
  "description": "Crop shows the title block region of a Georgia DOT bridge sheet, including the engineer seal, department header, firm name, bridge sheet identification, end bent label, project/location text, scale, and drawing metadata (drawing number, date, sheet count)."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "Piles",
      "tag": "",
      "shape": "H-pile",
      "material": "steel",
      "count": null,
      "note": "HP 12 x 53"
    }
  ],
  "measurements": [
    {
      "label": "Maximum factored axial load",
      "value": "212",
      "unit": "kips",
      "appliesTo": "Piles"
    },
    {
      "label": "Pile section",
      "value": "HP 12 x 53",
      "unit": "",
      "appliesTo": "Piles"
    },
    {
      "label": "Driving resistance",
      "value": "326",
      "unit": "kips",
      "appliesTo": "Piles"
    },
    {
      "label": "Minimum tip elevation (Bent 4L)",
      "value": "122",
      "unit": "",
      "appliesTo": "Bent 4L"
    },
    {
      "label": "Minimum tip elevation (Bent 4R)",
      "value": "144",
      "unit": "",
      "appliesTo": "Bent 4R"
    }
  ],
  "notes": [
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 212 KIPS.",
    "ALL PILES SHALL BE STEEL H, HP 12 X 53.",
    "ALL PILES SHALL BE DRIVEN TO A DRIVING RESISTANCE OF 326 KIPS AFTER A MINIMUM TIP ELEVATION OF 122 AT BENT 4L AND 144 AT BENT 4R IS ACHIEVED."
  ],
  "labels": [
    "PLAN DRIVING OBJECTIVE"
  ],
  "description": "Crop shows a notes block labeled Plan Driving Objective with pile design criteria: steel H-piles HP12x53, maximum factored axial load 212 kips, driving resistance 326 kips, and minimum tip elevations of 122 (Bent 4L) and 144 (Bent 4R). It appears on sheet 17 as plan notes for driving objectives."
}

{
  "view": "Section",
  "objects": [],
  "measurements": [
    {
      "label": "Scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Section"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION AT END BENT AND WALL",
    "FRONT OF WALL"
  ],
  "description": "Section view title area reading 'SECTION AT END BENT AND WALL' with a scale note; a partial annotation 'FRONT OF WALL' is visible on the right. No discrete construction elements are clearly shown in this crop."
}

{
  "view": "Schedule",
  "objects": [
    {
      "name": "CY CLASS AA CONCRETE",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 2,
      "note": ""
    },
    {
      "name": "LB BAR REINF STEEL",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforcing steel",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "CY CLASS AA CONCRETE",
      "value": "12.0",
      "unit": "CY",
      "appliesTo": "Bent 4 LT"
    },
    {
      "label": "CY CLASS AA CONCRETE",
      "value": "12.0",
      "unit": "CY",
      "appliesTo": "Bent 4 RT"
    },
    {
      "label": "LB BAR REINF STEEL",
      "value": "1434",
      "unit": "LB",
      "appliesTo": "Bent 4 LT"
    },
    {
      "label": "LB BAR REINF STEEL",
      "value": "1434",
      "unit": "LB",
      "appliesTo": "Bent 4 RT"
    }
  ],
  "notes": [],
  "labels": [
    "SUBSTRUCTURE QUANTITIES"
  ],
  "description": "A cropped portion of a substructure quantities schedule showing two items: cubic yard concrete and reinforcing steel, with quantities for Bent 4 LT and Bent 4 RT."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "C BEAM",
      "tag": "C BEAM 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 5",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 6",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 7",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 8",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 9",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 10",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 11",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM",
      "tag": "C BEAM 12",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "beam spacing (between C BEAMs)",
      "value": "7'-7 7/16\"",
      "unit": "ft-in",
      "appliesTo": "C BEAM 1-12"
    }
  ],
  "notes": [
    "SEE DETAIL 3 BRIDGE SHEET 16",
    "SEE DETAIL 4 BRIDGE SHEET 16"
  ],
  "labels": [
    "PLAN (BENT 4 LEFT)",
    "PLAN (BENT 4 RIGHT)"
  ],
  "description": "Plan views cropped from Sheet 17 showing Bent 4 left and Bent 4 right beam arrangements. The region displays a sequence of C BEAMs (1 through 12) with a repeating spacing dimension and cross-reference notes to bridge details on adjacent sheets."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "abutment",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Left end abutment with vertical elements; elevations indicated."
    },
    {
      "name": "wing wall",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Wing wall element at left abutment."
    },
    {
      "name": "pier / bent",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Interior piers/bents along the deck; typical spacing shown."
    },
    {
      "name": "deck slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Deck/slab surface depicted with elevations."
    },
    {
      "name": "parapet / barrier",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Top barrier along the deck edge."
    },
    {
      "name": "piles / pile elements",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": null,
      "note": "Vertical pile/bent elements supporting the deck."
    }
  ],
  "measurements": [
    {
      "label": "EL. 189.42",
      "value": "189.42",
      "unit": "ft",
      "appliesTo": "left abutment / deck edge"
    },
    {
      "label": "EL. 189.50",
      "value": "189.50",
      "unit": "ft",
      "appliesTo": "left abutment / deck edge"
    },
    {
      "label": "EL. 186.04",
      "value": "186.04",
      "unit": "ft",
      "appliesTo": "deck edge"
    },
    {
      "label": "EL. 185.93",
      "value": "185.93",
      "unit": "ft",
      "appliesTo": "deck edge"
    },
    {
      "label": "EL. 185.80",
      "value": "185.80",
      "unit": "ft",
      "appliesTo": "deck edge"
    },
    {
      "label": "EL. 185.67",
      "value": "185.67",
      "unit": "ft",
      "appliesTo": "deck edge"
    },
    {
      "label": "EL. 185.53",
      "value": "185.53",
      "unit": "ft",
      "appliesTo": "deck edge"
    },
    {
      "label": "EL. 185.37",
      "value": "185.37",
      "unit": "ft",
      "appliesTo": "deck edge"
    },
    {
      "label": "EL. 188.67",
      "value": "188.67",
      "unit": "ft",
      "appliesTo": "deck edge"
    },
    {
      "label": "EL. 188.71",
      "value": "188.71",
      "unit": "ft",
      "appliesTo": "deck edge"
    },
    {
      "label": "EL. 184.04",
      "value": "184.04",
      "unit": "ft",
      "appliesTo": "left side / footing"
    },
    {
      "label": "EL. 183.25",
      "value": "183.25",
      "unit": "ft",
      "appliesTo": "right side / footing"
    }
  ],
  "notes": [
    "4-441 AT EQ. SPACES",
    "4-441 AT EQ. SPACES",
    "7'-7 1/16\"",
    "10\"",
    "10\", TYP.",
    "2'-10 1/8\""
  ],
  "labels": [
    "A",
    "B",
    "Elevation"
  ],
  "description": "Elevation view of a bridge/structure showing end abutment with wing wall, multiple piers/bents, and a deck with typical spacing and elevations. Callouts A and B indicate typical details or sections, with numerous elevation references (EL.) along the deck and end sections. The crop focuses on the longitudinal arrangement of supports and the associated spacing and dimensions."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Abutment",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "end abutments (ELs shown)"
    },
    {
      "name": "Pile",
      "tag": "2-445B",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "2-445A",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "typical"
    },
    {
      "name": "Pile",
      "tag": "2-445C",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam / Girder",
      "tag": "4-1040",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall length",
      "value": "44'-1/16\"",
      "unit": "ft",
      "appliesTo": "Elevation"
    },
    {
      "label": "Left end to first pile",
      "value": "2'-10 1/8\"",
      "unit": "ft",
      "appliesTo": "Left abutment"
    },
    {
      "label": "Bay spacing (typical)",
      "value": "7'-7/16\"",
      "unit": "ft",
      "appliesTo": "Between piles"
    },
    {
      "label": "Right end to last pile",
      "value": "3'-3 5/8\"",
      "unit": "ft",
      "appliesTo": "Right abutment"
    },
    {
      "label": "Spacing between piles",
      "value": "10\"",
      "unit": "in",
      "appliesTo": "Piles"
    },
    {
      "label": "Elevation left abutment",
      "value": "EL. 188.39",
      "unit": "ft",
      "appliesTo": "Left abutment"
    },
    {
      "label": "Elevation near first bay",
      "value": "EL. 185.12",
      "unit": "ft",
      "appliesTo": "Deck"
    },
    {
      "label": "Elevation near mid bay",
      "value": "EL. 185.49",
      "unit": "ft",
      "appliesTo": "Deck"
    }
  ],
  "notes": [
    "4-440 OVER EACH PILE",
    "4-441 AT EQ. SPACES",
    "AT EQ. SPS. TYP. EA. BAY"
  ],
  "labels": [
    "A",
    "B",
    "EL. 189.36",
    "EL. 189.44",
    "EL. 188.39",
    "EL. 188.45",
    "EL. 185.12",
    "EL. 185.32",
    "EL. 185.49",
    "EL. 185.66",
    "EL. 185.82",
    "EL. 185.96",
    "EL. 183.96"
  ],
  "description": "Elevational view of a pile-supported bridge. The crop shows end abutments, a row of piles labeled 2-445B/2-445A/2-445C, a deck slab, and a girder/beams element labeled 4-1040. Typical bay spacings and elevations are annotated, with callouts A and B marking section references."
}

{
  "view": "Notes",
  "objects": [],
  "measurements": [],
  "notes": [
    "1. MAINTAIN 2\" CLEARANCE ON ALL REINFORCEMENT UNLESS OTHERWISE NOTED.",
    "2. SEE GA. STD. 9037 FOR DRAINAGE DETAILS AT END BENTS."
  ],
  "labels": [
    "NOTES:"
  ],
  "description": "Crop shows the NOTES section from sheet page 17, containing two notes: maintain 2 inch clearance on reinforcement unless noted otherwise, and reference GA. STD. 9037 for drainage details at end bents."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "CAP",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "dowel bars",
      "tag": "",
      "shape": "line",
      "material": "reinforcing steel",
      "count": 2,
      "note": "through-cap anchors"
    }
  ],
  "measurements": [
    {
      "label": "6'-0\" MIN.",
      "value": "6'-0\"",
      "unit": "MIN.",
      "appliesTo": "CAP length"
    },
    {
      "label": "3'-0\"",
      "value": "3'-0\"",
      "unit": "ft",
      "appliesTo": "CAP width"
    },
    {
      "label": "2'-0\" MIN.",
      "value": "2'-0\"",
      "unit": "MIN.",
      "appliesTo": "CAP height"
    }
  ],
  "notes": [],
  "labels": [
    "FRONT OF WALL",
    "B.F.P.R."
  ],
  "description": "Plan view showing a concrete cap (CAP) with two dowel/rebar anchors projecting from the bottom. Dimensions indicate a 6'-0\" minimum overall length, a 3'-0\" width portion, and a 2'-0\" minimum cap height; a wall front is shown to the right labeled FRONT OF WALL."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "outer plate / section boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner pocket / recess",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 4,
      "note": ""
    },
    {
      "name": "central post",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "3'-0\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Left span",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Right span",
      "value": "1'-6\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Bolt hole pattern (2-4-2)",
      "value": "2-442",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "Minimum centerline clearance",
      "value": "2\"",
      "unit": "in",
      "appliesTo": ""
    },
    {
      "label": "Typ. width (inside pocket)",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": ""
    }
  ],
  "notes": [],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "description": "Cross-section A-A of a member showing an outer rectangular plate with an inner recess, four corner holes, and a central vertical post extending downward. Includes notes on centerline clearance and minimum clearance to sides."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "outer boundary of the section"
    },
    {
      "name": "inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "inner opening/frame"
    },
    {
      "name": "bolt/anchor holes",
      "tag": "",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": "two circular holes near bottom"
    }
  ],
  "measurements": [
    {
      "label": "overall width (top)",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "outer boundary top width"
    },
    {
      "label": "bottom left offset",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "left bottom to centerline"
    },
    {
      "label": "bottom right offset",
      "value": "1'-6\"",
      "unit": "",
      "appliesTo": "right bottom to centerline"
    },
    {
      "label": "scale",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "SECTION B-B"
    }
  ],
  "notes": [
    "Section B-B cross-section with outer and inner boundaries and two bottom holes; shows vertical features and centerline reference."
  ],
  "labels": [
    "SECTION B-B",
    "SCALE: 3/4\" = 1'-0\"",
    "2-442",
    "4-1040",
    "2-445 SERIES"
  ],
  "description": "Cross-section view B-B of a concrete feature showing an outer boundary and an inner opening, with two bottom circular holes and supporting elements. Key dimensions visible include 3'-0\" overall width and 1'-6\" offsets from the centerline; scale is 3/4\" = 1'-0\"."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "Piles",
      "tag": "",
      "shape": "HP 12 x 53",
      "material": "steel",
      "count": null,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "",
      "shape": "bent",
      "material": "",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "maximum factored axial load",
      "value": "2I2",
      "unit": "KIPS",
      "appliesTo": "Piles"
    },
    {
      "label": "driving resistance",
      "value": "326",
      "unit": "KIPS",
      "appliesTo": "Piles"
    },
    {
      "label": "minimum tip elevation (Bent 4L)",
      "value": "122",
      "unit": "",
      "appliesTo": "Bent 4L"
    },
    {
      "label": "minimum tip elevation (Bent 4R)",
      "value": "144",
      "unit": "",
      "appliesTo": "Bent 4R"
    }
  ],
  "notes": [
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 2I2 KIPS.",
    "ALL PILES SHALL BE STEEL H, HP 12 X 53.",
    "ALL PILES SHALL BE DRIVEN TO A DRIVING RESISTANCE OF 326 KIPS AFTER A MINIMUM TIP ELEVATION OF 122 AT BENT 4L AND 144 AT BENT 4R IS ACHIEVED."
  ],
  "labels": [
    "PLAN DRIVING OBJECTIVE"
  ],
  "description": "This crop presents design criteria text for pile driving: the maximum factored axial load, pile type (steel HP 12x53), driving resistance target, and minimum tip elevations for Bent 4L and Bent 4R. It also includes a heading PLAN DRIVING OBJECTIVE, indicating the objective section of sheet 17; no geometric plan details are shown in this crop."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "Front face of wall",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "SCALE",
      "value": "3/4",
      "unit": "in",
      "appliesTo": "SECTION AT END BENT AND WALL"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION AT END BENT AND WALL",
    "FRONT FACE OF WALL"
  ],
  "description": "Section view title for the end bent and wall. The crop shows the front face of a wall with a scale note. Content is limited to the section title, a wall face label, and the scale reference; no other detailed elements are visible."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "CY CLASS AA CONCRETE",
      "tag": "",
      "shape": "",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "LB BAR REINF STEEL",
      "tag": "",
      "shape": "",
      "material": "reinforcing steel",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Bent 4 LT.",
      "value": "12.0",
      "unit": "",
      "appliesTo": "Bent 4 LT."
    },
    {
      "label": "Bent 4 RT.",
      "value": "12.0",
      "unit": "",
      "appliesTo": "Bent 4 RT."
    },
    {
      "label": "LB BAR REINF STEEL",
      "value": "1434",
      "unit": "",
      "appliesTo": "LB BAR REINF STEEL"
    },
    {
      "label": "LB BAR REINF STEEL",
      "value": "1434",
      "unit": "",
      "appliesTo": "LB BAR REINF STEEL"
    }
  ],
  "notes": [],
  "labels": [
    "SUBSTRUCTURE QUANTITIES"
  ],
  "description": "Crop shows a Substructure Quantities table with two material entries (Concrete and Reinforcing Steel) and four measurements: 12.0 for Bent 4 LT and Bent 4 RT, and 1434 for LB BAR REINF STEEL in left and right columns."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "Bent",
      "tag": "BENT 1 LEFT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 2 LEFT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 3 LEFT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 4 LEFT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 1 RIGHT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 2 RIGHT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 3 RIGHT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "BENT 4 RIGHT",
      "shape": "rectangular slender",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "FOOTING 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [],
  "notes": [],
  "labels": [],
  "description": "Detail crop of sheet page 18 showing the bent arrangements for BENT 1–4 on both left and right sides, with associated footings. The image focuses on individual bent elements rather than long-range plan features."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Reinforcement bars",
      "tag": "",
      "shape": "dashed lines",
      "material": "",
      "count": 1,
      "note": "stirrups/rebar depicted inside left portion"
    }
  ],
  "measurements": [],
  "notes": [
    "Bottom of footing elevation is labeled with an arrow callout."
  ],
  "labels": [
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Detail crop showing a footing with a bottom-of-footing-elevation callout. The main rectangular block represents the footing with a small reinforcement arrangement indicated by dashed lines."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "Bent",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "3 RIGHT"
    },
    {
      "name": "Footing",
      "tag": "Footing 3",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "Footing 4",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 12,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "PILE NO.",
      "value": "1",
      "unit": "",
      "appliesTo": "Pile 1"
    },
    {
      "label": "PILE NO.",
      "value": "2",
      "unit": "",
      "appliesTo": "Pile 2"
    },
    {
      "label": "PILE NO.",
      "value": "3",
      "unit": "",
      "appliesTo": "Pile 3"
    },
    {
      "label": "PILE NO.",
      "value": "4",
      "unit": "",
      "appliesTo": "Pile 4"
    },
    {
      "label": "PILE NO.",
      "value": "5",
      "unit": "",
      "appliesTo": "Pile 5"
    },
    {
      "label": "PILE NO.",
      "value": "6",
      "unit": "",
      "appliesTo": "Pile 6"
    },
    {
      "label": "PILE NO.",
      "value": "7",
      "unit": "",
      "appliesTo": "Pile 7"
    },
    {
      "label": "PILE NO.",
      "value": "8",
      "unit": "",
      "appliesTo": "Pile 8"
    },
    {
      "label": "PILE NO.",
      "value": "9",
      "unit": "",
      "appliesTo": "Pile 9"
    },
    {
      "label": "PILE NO.",
      "value": "10",
      "unit": "",
      "appliesTo": "Pile 10"
    },
    {
      "label": "PILE NO.",
      "value": "11",
      "unit": "",
      "appliesTo": "Pile 11"
    },
    {
      "label": "PILE NO.",
      "value": "12",
      "unit": "",
      "appliesTo": "Pile 12"
    }
  ],
  "notes": [],
  "labels": [
    "Sheet page 18",
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Table from Sheet page 18 showing Bent 3 Right, Footing 3 and Footing 4 groups with Pile Nos. 1–12. Tip elevations and bottom footing elevations are not provided in this crop."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "Bent 4 Left",
      "tag": "4 LEFT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent 4 Right",
      "tag": "4 RIGHT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "unknown",
      "material": "unknown",
      "count": 12,
      "note": "Piles BEAM 1–12; pile tip elevations not shown in this crop"
    }
  ],
  "measurements": [],
  "notes": [],
  "labels": [
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION"
  ],
  "description": "This crop shows a pile layout table for two bents (Bent 4 Left and Bent 4 Right) with 12 piles total (BEAM 1–12). Pile tip elevations are not provided in this crop."
}

{
  "view": "Notes",
  "objects": [],
  "measurements": [],
  "notes": [
    "NOTE:\nTHIS \"AS-BUILT FOUNDATION INFORMATION\" SHEET SHALL BE FILLED IN BY THE PROJECT ENGINEER AND THE COMPLETED PDF FORWARDED TO BRIDGEOFFICE@DOT.GA.GOV AFTER INSTALLATION OF ALL PILES AND FOOTINGS FOR POSTING TO THE PLANS AS A PERMANENT RECORD OF THE BRIDGE CONSTRUCTION."
  ],
  "labels": [],
  "description": "Crop shows a single note block with instructions about completing an as-built foundation information sheet and forwarding the PDF after pile and footing installation for permanent record."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "BENT",
      "tag": "I LEFT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BENT",
      "tag": "I RIGHT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "PILE",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 12,
      "note": "Beams BEAM 1–12 correspond to PILE NO. 1–12; PILE TIP ELEVATION not shown"
    }
  ],
  "measurements": [
    {
      "label": "PILE NO. 1",
      "value": "1",
      "unit": "",
      "appliesTo": "PILE 1"
    },
    {
      "label": "PILE NO. 2",
      "value": "2",
      "unit": "",
      "appliesTo": "PILE 2"
    },
    {
      "label": "PILE NO. 3",
      "value": "3",
      "unit": "",
      "appliesTo": "PILE 3"
    },
    {
      "label": "PILE NO. 4",
      "value": "4",
      "unit": "",
      "appliesTo": "PILE 4"
    },
    {
      "label": "PILE NO. 5",
      "value": "5",
      "unit": "",
      "appliesTo": "PILE 5"
    },
    {
      "label": "PILE NO. 6",
      "value": "6",
      "unit": "",
      "appliesTo": "PILE 6"
    },
    {
      "label": "PILE NO. 7",
      "value": "7",
      "unit": "",
      "appliesTo": "PILE 7"
    },
    {
      "label": "PILE NO. 8",
      "value": "8",
      "unit": "",
      "appliesTo": "PILE 8"
    },
    {
      "label": "PILE NO. 9",
      "value": "9",
      "unit": "",
      "appliesTo": "PILE 9"
    },
    {
      "label": "PILE NO. 10",
      "value": "10",
      "unit": "",
      "appliesTo": "PILE 10"
    },
    {
      "label": "PILE NO. 11",
      "value": "11",
      "unit": "",
      "appliesTo": "PILE 11"
    },
    {
      "label": "PILE NO. 12",
      "value": "12",
      "unit": "",
      "appliesTo": "PILE 12"
    }
  ],
  "notes": [
    "PILE TIP ELEVATION column is blank in this crop.",
    "Rows are grouped under Bent I LEFT and Bent I RIGHT, with BEAM locations BEAM 1–12."
  ],
  "labels": [
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BEAM 1",
    "BEAM 2",
    "BEAM 3",
    "BEAM 4",
    "BEAM 5",
    "BEAM 6",
    "BEAM 7",
    "BEAM 8",
    "BEAM 9",
    "BEAM 10",
    "BEAM 11",
    "BEAM 12",
    "I LEFT",
    "I RIGHT"
  ],
  "description": "Table page showing bent groups I LEFT and I RIGHT with a sequence of piles BEAM 1 through BEAM 12 and corresponding PILE NO. 1 through 12. PILE TIP ELEVATION values are not provided in this crop."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "Bent",
      "tag": "2 LEFT",
      "shape": "",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 12,
      "note": "Piles numbered 1 through 12 under Footing 1 and Footing 2"
    }
  ],
  "measurements": [
    {
      "label": "PILE NO.",
      "value": "1",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "2",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "3",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "4",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "5",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "6",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "7",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "8",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "9",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "10",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "11",
      "unit": "",
      "appliesTo": ""
    },
    {
      "label": "PILE NO.",
      "value": "12",
      "unit": "",
      "appliesTo": ""
    }
  ],
  "notes": [],
  "labels": [
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BOTTOM OF FOOTING ELEVATION",
    "FOOTING 1",
    "FOOTING 2"
  ],
  "description": "Table from sheet page 18 showing Bent 2 Left with two footings. Pile numbers 1–12 are listed under Footing 1 and Footing 2, with columns for Pile Tip Elevation and Bottom of Footing Elevation (blank in this crop)."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 12,
      "note": "Pile Nos. 1–12; Footing 3 contains piles 1–6; Footing 4 contains piles 7–12."
    }
  ],
  "measurements": [],
  "notes": [],
  "labels": [
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Table showing a pile schedule for Bent 2 Right with two footings. Pile Nos. 1–6 correspond to Footing 3 and Nos. 7–12 correspond to Footing 4; Pile Tip Elevation and Bottom of Footing Elevation columns are blank in this crop."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "Bent",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 1,
      "note": "3 LEFT"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 12,
      "note": ""
    },
    {
      "name": "Footing",
      "tag": "",
      "shape": "",
      "material": "",
      "count": 2,
      "note": "FOOTING 1 and FOOTING 2 in PILE LOCATION"
    }
  ],
  "measurements": [
    {
      "label": "PILE NO.",
      "value": "1",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "2",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "3",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "4",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "5",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "6",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "7",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "8",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "9",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "10",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "11",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "PILE NO.",
      "value": "12",
      "unit": "",
      "appliesTo": "Pile"
    }
  ],
  "notes": [],
  "labels": [
    "BENT",
    "PILE LOCATION",
    "PILE NO.",
    "PILE TIP ELEVATION",
    "BOTTOM OF FOOTING ELEVATION"
  ],
  "description": "Table shows Bent 3 Left with two footings and a pile list numbered 1 through 12. Pile tip elevation and bottom of footing elevation fields appear unfilled in this crop."
}