GDOT17

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Bent",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "BENT 2 LEFT LOOKING AHEAD"
    },
    {
      "name": "Column",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "C COLUMN 1"
    },
    {
      "name": "Column",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "C COLUMN 2"
    },
    {
      "name": "H-pile",
      "tag": "",
      "shape": "rectangular/line (pile type shown in detail)",
      "material": "steel",
      "count": 1,
      "note": "H-PILE"
    }
  ],
  "measurements": [
    {
      "label": "Main span length",
      "value": "25'-0\"",
      "unit": "ft",
      "appliesTo": "Span between columns (center to center)"
    },
    {
      "label": "Left bay width",
      "value": "8'-9\"",
      "unit": "ft",
      "appliesTo": "Left portion of bent/approach area"
    },
    {
      "label": "Between-columns distance",
      "value": "3'-2\"",
      "unit": "ft",
      "appliesTo": "Between structural elements in the span"
    },
    {
      "label": "Pile cap / footing width",
      "value": "11'-0\"",
      "unit": "ft",
      "appliesTo": "Eq. SPS region referenced in notes"
    }
  ],
  "notes": [
    "1. SEE BRIDGE SHEET NO.16 FOR CAP, COLUMN AND FOOTING SECTIONS.",
    "2. BARS 422 NOT SHOWN.",
    "3. EXTEND BARS INTO CAP 3'-6\" INTO CAP."
  ],
  "labels": [
    "ELEVATION (BENT 2 LEFT LOOKING AHEAD)",
    "PILE CONNECTION DETAIL",
    "NOTES"
  ],
  "description": "Elevation view of Bent 2 with adjacent columns and a pile arrangement. Includes a pile connection detail area and a notes block on the right; shows reinforcement and concrete elements typical of a bent and column assembly in a bridge structure."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "Column",
      "tag": "COLUMN 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Pier/column"
    },
    {
      "name": "Column",
      "tag": "COLUMN 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Pier/column"
    },
    {
      "name": "Deck slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column footing",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "footings beneath columns"
    }
  ],
  "measurements": [
    {
      "label": "Span",
      "value": "25'-0\"",
      "unit": "",
      "appliesTo": "Between COLUMN 3 and COLUMN 4"
    },
    {
      "label": "Min vertical clearance",
      "value": "4'-0\"",
      "unit": "",
      "appliesTo": "Right edge"
    },
    {
      "label": "EL. 186.42 (BK)",
      "value": "186.42",
      "unit": "",
      "appliesTo": "Top deck left"
    },
    {
      "label": "EL. 185.75 (AH)",
      "value": "185.75",
      "unit": "",
      "appliesTo": "Top deck near center"
    },
    {
      "label": "EL. 181.84",
      "value": "181.84",
      "unit": "",
      "appliesTo": "Left column base elevation"
    }
  ],
  "notes": [
    "ELEVATION (BENT 2 RIGHT LOOKING AHEAD)"
  ],
  "labels": [
    "BRIDGE NO. 1 LT. AND RT."
  ],
  "description": "Elevation view showing the deck resting on two columns (COLUMN 3 and COLUMN 4) with associated footing and deck slab details."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "Pile",
      "tag": "",
      "shape": "H-pile",
      "material": "steel",
      "count": 1,
      "note": "HP 12 x 53"
    },
    {
      "name": "Bent",
      "tag": "Bent 2L",
      "shape": "bent",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "Bent 2R",
      "shape": "bent",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Pile size",
      "value": "HP 12 x 53",
      "unit": "",
      "appliesTo": "Pile"
    },
    {
      "label": "Maximum factored axial load",
      "value": "237",
      "unit": "kips",
      "appliesTo": "Pile"
    },
    {
      "label": "Driving resistance",
      "value": "365",
      "unit": "kips",
      "appliesTo": "Pile"
    },
    {
      "label": "Tip elevation (Bent 2L)",
      "value": "119",
      "unit": "",
      "appliesTo": "Bent 2L"
    },
    {
      "label": "Tip elevation (Bent 2R)",
      "value": "118",
      "unit": "",
      "appliesTo": "Bent 2R"
    }
  ],
  "notes": [
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 237 KIPS.",
    "ALL PILES SHALL BE STEEL H,HP 12 X 53.",
    "PLAN DRIVING OBJECTIVE",
    "ALL PILES SHALL BE DRIVEN TO A DRIVING RESISTANCE OF 365 KIPS AFTER A MINIMUM TIP ELEVATION OF 119 AT BENT 2L AND 118 AT BENT 2R IS ACHIEVED."
  ],
  "labels": [
    "PLAN DRIVING OBJECTIVE"
  ],
  "description": "This crop shows a notes block with pile design criteria and driving objectives, specifying steel H-piles (HP 12x53) and target driving resistance (365 kips) with minimum tip elevations for Bent 2L and Bent 2R."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "CY CLASS AA CONCRETE",
      "tag": "",
      "shape": "text",
      "material": "concrete",
      "count": 2,
      "note": ""
    },
    {
      "name": "LB BAR REINF STEEL",
      "tag": "",
      "shape": "text",
      "material": "reinforcing steel",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "CY CLASS AA CONCRETE",
      "value": "93.0",
      "unit": "CY",
      "appliesTo": "Bent 2 Lt"
    },
    {
      "label": "CY CLASS AA CONCRETE",
      "value": "93.0",
      "unit": "CY",
      "appliesTo": "Bent 2 Rt"
    },
    {
      "label": "LB BAR REINF STEEL",
      "value": "15875",
      "unit": "LB",
      "appliesTo": "Bent 2 Lt"
    },
    {
      "label": "LB BAR REINF STEEL",
      "value": "15848",
      "unit": "LB",
      "appliesTo": "Bent 2 Rt"
    }
  ],
  "notes": [],
  "labels": [
    "SUBSTRUCTURE QUANTITIES"
  ],
  "description": "Table of substructure quantities for Bent 2 Left and Bent 2 Right, listing concrete in CY and reinforcing steel in LB."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "BEAM",
      "tag": "C BEAM 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 5",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 6",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 7",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 8",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 9",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 10",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 11",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BEAM",
      "tag": "C BEAM 12",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "42'-6\"",
      "value": "42'-6\"",
      "unit": "ft-in",
      "appliesTo": "PLAN LEFT BEAMS"
    },
    {
      "label": "6'-0\"",
      "value": "6'-0\"",
      "unit": "ft-in",
      "appliesTo": "PLAN LEFT BEAMS"
    },
    {
      "label": "STA. 18+63.35",
      "value": "18+63.35",
      "unit": "",
      "appliesTo": "PLAN LEFT"
    },
    {
      "label": "STA. 18+56.65",
      "value": "18+56.65",
      "unit": "",
      "appliesTo": "PLAN RIGHT"
    }
  ],
  "notes": [
    "FORM 3\" DIA. X 12\" DEEP HOLE FOR 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "PLAN (BENT 3 LEFT)",
    "PLAN (BENT 3 RIGHT)"
  ],
  "description": "Two plan views labeled PLAN (BENT 3 LEFT) and PLAN (BENT 3 RIGHT), showing beams C BEAM 1 through C BEAM 12. The left plan length is 42'-6\" with a 6'-0\" offset at the end; dowel hole details are noted above the plan."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "Bent",
      "tag": "BENT 3 LEFT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Plan view of Bent 3 Left"
    },
    {
      "name": "Bent",
      "tag": "BENT 3 RIGHT",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "Plan view of Bent 3 Right"
    },
    {
      "name": "Column",
      "tag": "COLUMN 1",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "COLUMN 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "COLUMN 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "COLUMN 4",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "H-PILE",
      "shape": "line with cross-section (pile)",
      "material": "steel",
      "count": 1,
      "note": "Pile shown in Pile Connection Detail"
    },
    {
      "name": "Pile Connection Detail",
      "tag": "PILE CONNECTION DETAIL",
      "shape": "detail box",
      "material": "",
      "count": 1,
      "note": "No scale"
    },
    {
      "name": "Beam / Girder",
      "tag": "8-1132",
      "shape": "rectangular",
      "material": "steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam / Girder",
      "tag": "2-530",
      "shape": "rectangular",
      "material": "steel",
      "count": 1,
      "note": ""
    },
    {
      "name": "Beam / Girder",
      "tag": "8-133",
      "shape": "rectangular",
      "material": "steel",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [],
  "notes": [
    "NOTES:",
    "1. SEE BRIDGE SHEET NO.16 FOR CAP, COLUMN AND FOOTING SECTIONS.",
    "2. BARS 432 NOT SHOWN.",
    "3. EXTEND BARS 113'9\" INTO CAP."
  ],
  "labels": [
    "PLAN (BENT 3 LEFT)",
    "PLAN (BENT 3 RIGHT)",
    "ELEVATION (BENT 3 LEFT LOOKING AHEAD)",
    "ELEVATION (BENT 3 RIGHT LOOKING AHEAD)",
    "PILE CONNECTION DETAIL",
    "DEPARTMENT OF TRANSPORTATION",
    "INTERMEDIATE BENT 3"
  ],
  "description": "Crop showing plan views of Bent 3 on left and right, elevations for Bent 3, a pile and pile-connection detail, and associated columns; essentially a detail/detail-front page of the Intermediate Bent 3 sheet with a pile connection detail."
}

{
  "view": "Title Block",
  "objects": [
    {
      "name": "TITLE BLOCK",
      "tag": "",
      "shape": "rectangular",
      "material": "title block area (printed)",
      "count": 1,
      "note": ""
    },
    {
      "name": "SEAL",
      "tag": "",
      "shape": "circular",
      "material": "georgia registered engineer seal",
      "count": 1,
      "note": ""
    },
    {
      "name": "REVISION BLOCK",
      "tag": "",
      "shape": "rectangular",
      "material": "revision history",
      "count": 1,
      "note": "vertical orientation"
    },
    {
      "name": "BRIDGE SHEET REFERENCE",
      "tag": "",
      "shape": "rectangular",
      "material": "title block label",
      "count": 1,
      "note": "Bridge sheet 15 of 21"
    },
    {
      "name": "DRAWING NO.",
      "tag": "",
      "shape": "rectangular",
      "material": "title block label",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "DRAWING NO.",
      "value": "35-0015",
      "unit": "",
      "appliesTo": "Drawing No."
    },
    {
      "label": "BRIDGE SHEET",
      "value": "15 OF 21",
      "unit": "",
      "appliesTo": "Bridge Sheet"
    },
    {
      "label": "SCALE",
      "value": "1/4\" = 1'-0\" (UNLESS OTHERWISE NOTED) MAY 2025",
      "unit": "",
      "appliesTo": "Scale"
    }
  ],
  "notes": [
    "Sheet page 15.",
    "ELEVATION (BENT 3 RIGHT LOOKING AHEAD)",
    "BRIDGE NO. ILT. AND RT."
  ],
  "labels": [],
  "description": "Crop shows the title block area of a Georgia DOT bridge sheet, including a circular georgia registered engineer seal, and a vertical revision/history block. It also contains drawing number, bridge sheet reference (15 of 21), and scale information, with associated text indicating the elevation view for Bent 3. The visible department/consultant text is part of the title block."
}

{
  "view": "Notes",
  "objects": [],
  "measurements": [
    {
      "label": "MAXIMUM FACTORED AXIAL LOAD",
      "value": "222",
      "unit": "KIPS",
      "appliesTo": "Piles"
    },
    {
      "label": "DRIVING RESISTANCE",
      "value": "342",
      "unit": "KIPS",
      "appliesTo": "Piles"
    },
    {
      "label": "TIP ELEVATION",
      "value": "115",
      "unit": "",
      "appliesTo": "Bent 3L"
    },
    {
      "label": "TIP ELEVATION",
      "value": "114",
      "unit": "",
      "appliesTo": "Bent 3R"
    }
  ],
  "notes": [
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 222 KIPS.",
    "ALL PILES SHALL BE STEEL H, HP 12 X 53.",
    "ALL PILES SHALL BE DRIVEN TO A DRIVING RESISTANCE OF 342 KIPS AFTER A MINIMUM TIP ELEVATION OF 115 AT BENT 3L AND 114 AT BENT 3R IS ACHIEVED."
  ],
  "labels": [
    "PLAN DRIVING OBJECTIVE"
  ],
  "description": "Crop shows sheet page 15 with note-style text: pile design loads, pile type, and driving objective; no actual structural elements drawn in this crop."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "CY CLASS AA CONCRETE",
      "tag": "",
      "shape": "",
      "material": "concrete (Class AA)",
      "count": 2,
      "note": ""
    },
    {
      "name": "LB BAR REINF STEEL",
      "tag": "",
      "shape": "",
      "material": "reinforcing steel",
      "count": 2,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Bent 3 LT CY",
      "value": "104.0",
      "unit": "CY",
      "appliesTo": "CY CLASS AA CONCRETE (Bent 3 LT)"
    },
    {
      "label": "Bent 3 RT CY",
      "value": "104.0",
      "unit": "CY",
      "appliesTo": "CY CLASS AA CONCRETE (Bent 3 RT)"
    },
    {
      "label": "Bent 3 LT LB",
      "value": "16679",
      "unit": "LB",
      "appliesTo": "LB BAR REINF STEEL (Bent 3 LT)"
    },
    {
      "label": "Bent 3 RT LB",
      "value": "16681",
      "unit": "LB",
      "appliesTo": "LB BAR REINF STEEL (Bent 3 RT)"
    }
  ],
  "notes": [
    "Sheet page 15."
  ],
  "labels": [
    "SUBSTRUCTURE QUANTITIES",
    "ITEM",
    "BENT 3 LT.",
    "BENT 3 RT."
  ],
  "description": "Table of substructure quantities showing two items: Class AA concrete and reinforcing steel, with quantities for Bent 3 Left and Bent 3 Right."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "BEAM",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 12,
      "note": "Beams shown in two plan blocks (BEAM 1–12)."
    },
    {
      "name": "BEARING",
      "tag": "C BEARING",
      "shape": "circular",
      "material": "",
      "count": 2,
      "note": ""
    },
    {
      "name": "HOLE FOR DOWEL BAR",
      "tag": "FORM 3 DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP.",
      "shape": "circular",
      "material": "",
      "count": null,
      "note": "Holes for dowel bars (typical)."
    }
  ],
  "measurements": [
    {
      "label": "42'-6\"",
      "value": "42'-6\"",
      "unit": "ft",
      "appliesTo": "Plan width overall"
    },
    {
      "label": "6'-0\"",
      "value": "6'-0\"",
      "unit": "ft",
      "appliesTo": "Left segment width"
    },
    {
      "label": "7'-7 1/16\"",
      "value": "7'-7 1/16\"",
      "unit": "ft",
      "appliesTo": "Spacing between beams (repetition across plan)"
    },
    {
      "label": "7'-7 1/16\"",
      "value": "7'-7 1/16\"",
      "unit": "ft",
      "appliesTo": "Spacing between beams (repetition across plan)"
    },
    {
      "label": "2'-3/8\"",
      "value": "2'-3/8\"",
      "unit": "ft",
      "appliesTo": "Dim near left end"
    }
  ],
  "notes": [
    "FORM 3 DIA. X 12\" DEEP HOLE FOR 1 1/2\" DIA. SMOOTH DOWEL BAR, TYP."
  ],
  "labels": [
    "PLAN",
    "PLAN (BENT 3 LEFT)",
    "PLAN (BENT 3 RIGHT)"
  ],
  "description": "Plan view crop showing Bent 3 left and Bent 3 right sections with BEAMs 1–12, end bearings, and dowel-bar hole details."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Bent",
      "tag": "Bent 3 Left",
      "shape": "rectangular (plan view)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Bent",
      "tag": "Bent 3 Right",
      "shape": "rectangular (plan view)",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "G COLUMN 1",
      "shape": "vertical line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "C COLUMN 2",
      "shape": "vertical line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "C COLUMN 3",
      "shape": "vertical line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "C COLUMN 4",
      "shape": "vertical line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile Connection Detail",
      "tag": "",
      "shape": "detail block",
      "material": "",
      "count": 1,
      "note": "No scale"
    },
    {
      "name": "H-Pile",
      "tag": "",
      "shape": "H-section",
      "material": "steel",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [],
  "notes": [
    "1. SEE BRIDGE SHEET NO. 16 FOR CAP, COLUMN AND FOOTING SECTIONS.",
    "2. BARS 432 NOT SHOWN.",
    "3. EXTEND BARS INTO CAP."
  ],
  "labels": [
    "PLAN (BENT 3 LEFT)",
    "PLAN (BENT 3 RIGHT)",
    "NOTES",
    "PILE CONNECTION DETAIL",
    "ELEVATION (BENT 3 LEFT LOOKING AHEAD)"
  ],
  "description": "Two plan views for Bent 3 (left and right) showing columns and pile-related elements, plus a pile connection detail and a notes block."
}

{
  "view": "Notes",
  "objects": [
    {
      "name": "Pile",
      "tag": "",
      "shape": "H-pile (HP 12 x 53)",
      "material": "steel",
      "count": null,
      "note": "All piles shall be steel H, HP 12 X 53."
    },
    {
      "name": "Bent",
      "tag": "",
      "shape": "Bent",
      "material": "",
      "count": null,
      "note": "Bent 3L and Bent 3R referenced in plan notes."
    }
  ],
  "measurements": [
    {
      "label": "Maximum factored axial load",
      "value": "222",
      "unit": "kips",
      "appliesTo": "Piles"
    },
    {
      "label": "Driving resistance",
      "value": "342",
      "unit": "kips",
      "appliesTo": "Piles"
    },
    {
      "label": "Minimum tip elevation",
      "value": "115",
      "unit": "",
      "appliesTo": "Bent 3L"
    },
    {
      "label": "Minimum tip elevation",
      "value": "I14",
      "unit": "",
      "appliesTo": "Bent 3R"
    }
  ],
  "notes": [
    "PILES ARE DESIGNED FOR A MAXIMUM FACTORED AXIAL LOAD OF 222 KIPS.",
    "ALL PILES SHALL BE STEEL H, HP 12 X 53.",
    "ALL PILES SHALL BE DRIVEN TO A DRIVING RESISTANCE OF 342 KIPS AFTER A MINIMUM TIP ELEVATION OF 115 AT BENT 3L AND I14 AT BENT 3R IS ACHIEVED."
  ],
  "labels": [
    "PLAN DRIVING OBJECTIVE"
  ],
  "description": "This crop contains plan notes related to pile design and driving criteria. It specifies a maximum axial load, pile type (steel H-piles HP 12x53), driving resistance target, and minimum tip elevations for Bent 3L and Bent 3R references."
}

{
  "view": "Table",
  "objects": [
    {
      "name": "CY CLASS AA CONCRETE",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "LB BAR REINF STEEL",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced steel",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "CY CLASS AA CONCRETE",
      "value": "104.0",
      "unit": "CY",
      "appliesTo": "BENT 3 LT."
    },
    {
      "label": "CY CLASS AA CONCRETE",
      "value": "104.0",
      "unit": "CY",
      "appliesTo": "BENT 3 RT."
    },
    {
      "label": "LB BAR REINF STEEL",
      "value": "16679",
      "unit": "LB",
      "appliesTo": "BENT 3 LT."
    },
    {
      "label": "LB BAR REINF STEEL",
      "value": "16681",
      "unit": "LB",
      "appliesTo": "BENT 3 RT."
    }
  ],
  "notes": [],
  "labels": [
    "SUBSTRUCTURE QUANTITIES"
  ],
  "description": "A table labeled SUBSTRUCTURE QUANTITIES showing two items (CY CLASS AA CONCRETE and LB BAR REINF STEEL) with quantities for Bent 3 LT and Bent 3 RT."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "Foundation/base - reinforced concrete pad",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Anchor bolts",
      "tag": "",
      "shape": "circular",
      "material": "steel",
      "count": null,
      "note": "perimeter anchors around the base (visible as circular bolts)"
    },
    {
      "name": "Bent",
      "tag": "BENT",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "dimension line indicates section through a bent member"
    },
    {
      "name": "Reinforcement/bolts along interior perimeter",
      "tag": "",
      "shape": "points along edge",
      "material": "reinforcing steel",
      "count": null,
      "note": "represented by evenly spaced dots along the inner/perimeter edges"
    }
  ],
  "measurements": [
    {
      "label": "TOTAL_WIDTH_TOP",
      "value": "4'-3\"",
      "unit": "ft-in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "CENTER_SPAN_LEFT",
      "value": "2'-1/2\"",
      "unit": "ft-in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "CENTER_SPAN_RIGHT",
      "value": "2'-1/2\"",
      "unit": "ft-in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "TOP_DIMENSION_SPLIT",
      "value": "11 1/2\"",
      "unit": "in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "MIN_CLEARANCE_HORIZ",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "MIN_CL_LEFT",
      "value": "4'-0\"",
      "unit": "ft-in",
      "appliesTo": "Section A-A"
    },
    {
      "label": "EDGE_COLUMN_SPACING",
      "value": "9\"",
      "unit": "in",
      "appliesTo": "Section A-A"
    }
  ],
  "notes": [
    "\"2\" MIN. CL., TYP.\"",
    "\"5-4220 OR EACH FACE\""
  ],
  "labels": [
    "SECTION A-A"
  ],
  "description": "Cross-section detail labeled SECTION A-A showing a reinforced concrete base with perimeter anchor bolts and a bent member, plus spacing and minimum clearance dimensions."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": "outer boundary of Bent 3 footing"
    },
    {
      "name": "Anchor bolts",
      "tag": "",
      "shape": "circle",
      "material": "steel",
      "count": null,
      "note": "perimeter/around footing (circles indicate bolts)"
    },
    {
      "name": "Column location",
      "tag": "COLUMN",
      "shape": "dashed line",
      "material": "",
      "count": null,
      "note": "location of column above Bent 3, shown as dashed centerline"
    }
  ],
  "measurements": [
    {
      "label": "Footing width (Bent 3)",
      "value": "13'-0\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    }
  ],
  "notes": [
    "SECTION B-B",
    "SCALE: 3/8\" = 1'-0\""
  ],
  "labels": [
    "FOOTING PLAN - BENT 3"
  ],
  "description": "Plan view of the Bent 3 footing showing the outer rectangular footing outline with anchor bolts around the perimeter and the column location line (COLUMN) indicating where the column sits on the footing. A section callout B-B is shown, with the drawing scale noted."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "Panel with grid",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Panel with internal grid pattern."
    },
    {
      "name": "Post with bolt holes",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Vertical member with multiple circular holes."
    },
    {
      "name": "Base footing",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Bottom base block supporting the post (visible in Section A-A)."
    }
  ],
  "measurements": [
    {
      "label": "3'-0 7/16\"",
      "value": "3'-0 7/16\"",
      "unit": "",
      "appliesTo": "Panel width"
    },
    {
      "label": "1'-0\"",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "Post width"
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL I",
    "SECTION A-A"
  ],
  "description": "Detail view showing a rectangular grid-panel and a vertical post with bolt-holes; includes a section view labeled A-A."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "panel frame",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "Rectangular outer frame with internal grid lines (plan view)"
    }
  ],
  "measurements": [
    {
      "label": "Top width",
      "value": "5'-4 3/4\"",
      "unit": "ft",
      "appliesTo": ""
    }
  ],
  "notes": [],
  "labels": [
    "B",
    "C",
    "5-510A",
    "4-5IOB"
  ],
  "description": "Plan view of a rectangular panel/frame with an internal grid pattern. The overall width shown is 5'-4 3/4\". Cross-section callouts B and C are indicated; detail callouts 5-510A and 4-5IOB reference related drawings."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "bolts",
      "tag": "",
      "shape": "circular",
      "material": "unknown",
      "count": 8,
      "note": "pattern of circular holes along inner face of vertical member"
    }
  ],
  "measurements": [
    {
      "label": "Width",
      "value": "1'-0\"",
      "unit": "ft-in",
      "appliesTo": "bolts pattern / inner face"
    }
  ],
  "notes": [],
  "labels": [
    "AT EA. SPs.",
    "5-3A EA. FACE"
  ],
  "description": "Detail showing a vertical member with a 1'-0\" width opening at the top. There is a vertical sequence of circular holes along the inner face and a bottom feature with an angled annotation. The right-side text appears to be face-related notes."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "Outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "Inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "Reinforcement bars",
      "tag": "",
      "shape": "circular",
      "material": "steel (reinforcement bars)",
      "count": null,
      "note": "dots along interior/left side"
    },
    {
      "name": "Callout tag",
      "tag": "510B",
      "shape": "annotation",
      "material": "text",
      "count": null,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "",
      "value": "1'-0\"",
      "unit": "ft-in",
      "appliesTo": "Outer boundary width"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION C-C"
  ],
  "description": "Section C-C cross-section showing a double rectangular boundary with an inner void and a set of circular reinforcement bars along the interior. A callout labeled 510B is present near the lower portion, and a top width dimension of 1'-0\" is indicated."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "slab boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "outer boundary of the detail area"
    },
    {
      "name": "reinforcement grid",
      "tag": "",
      "shape": "grid",
      "material": "reinforced concrete",
      "count": 1,
      "note": "rectangular lattice of reinforcing bars"
    },
    {
      "name": "L-shaped notch/opening",
      "tag": "",
      "shape": "L-shaped opening",
      "material": "reinforced concrete",
      "count": 1,
      "note": "inner cutout in the slab"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "slab boundary"
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL 2",
    "B",
    "C"
  ],
  "description": "Detail view of a reinforced concrete slab showing a rectangular outer boundary, an interior reinforcement grid, and an L-shaped notch/opening in the lower portion. It is labeled DETAIL 2 with section callouts B and C."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Column",
      "tag": "",
      "shape": "centerline",
      "material": "",
      "count": 1,
      "note": "centerline of footing (column alignment)"
    },
    {
      "name": "Pile",
      "tag": "",
      "shape": "line",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "11'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    },
    {
      "label": "Left offset to interior line",
      "value": "1'-3\"",
      "unit": "ft-in",
      "appliesTo": "Footing (top width)"
    },
    {
      "label": "Top width segment 1",
      "value": "4'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing (top)"
    },
    {
      "label": "Top width segment 2",
      "value": "4'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing (top)"
    },
    {
      "label": "Right offset to boundary",
      "value": "1'-3\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    },
    {
      "label": "Overall height",
      "value": "11'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    },
    {
      "label": "Left height segment 1",
      "value": "4'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing (left)"
    },
    {
      "label": "Left height segment 2",
      "value": "4'-6\"",
      "unit": "ft-in",
      "appliesTo": "Footing (left)"
    },
    {
      "label": "Bottom offset to boundary",
      "value": "1'-3\"",
      "unit": "ft-in",
      "appliesTo": "Footing"
    }
  ],
  "notes": [],
  "labels": [
    "FOOTING PLAN - BENT 2",
    "SCALE: 3/8\" = 1'-0\"",
    "COLUMN",
    "PILE",
    "BENT 2"
  ],
  "description": "Plan view of Footing Plan for Bent 2 showing an outer rectangular footing with interior column alignment and a pile callout. Dimensional notes indicate overall width and height with interior spacings."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "Panel, grid pattern",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "grid interior lines"
    },
    {
      "name": "Plate, vertical with bolt holes",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "holes along face (bolts)"
    }
  ],
  "measurements": [
    {
      "label": "3'-0 7/16\"",
      "value": "3'-0 7/16\"",
      "unit": "in",
      "appliesTo": "Panel, grid pattern"
    },
    {
      "label": "1'-0\"",
      "value": "1'-0\"",
      "unit": "in",
      "appliesTo": "Plate, vertical with bolt holes"
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL 3",
    "SECTION D-D",
    "D"
  ],
  "description": "Detail 3 view of a grid-pattern panel on the left and a Section D-D through a slender vertical plate with bolt holes on the right. The left panel has an overall width of 3'-0 7/16\"; the right member is 1'-0\" wide with holes visible along its face."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Panel",
      "tag": "5-540A",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    },
    {
      "name": "Panel",
      "tag": "4-540B",
      "shape": "rectangular",
      "material": "unknown",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Top overall length",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "panels 5-540A and 4-540B region"
    },
    {
      "label": "Right side height",
      "value": "3A",
      "unit": "",
      "appliesTo": "right edge"
    }
  ],
  "notes": [],
  "labels": [
    "No Scale"
  ],
  "description": "Plan view showing a rectangular boundary with a grid inside and two labeled panels, 5-540A and 4-540B, spanning a top dimension of 5'-4 3/4\". Reference callouts E and F appear at the top; the right edge is dimensioned as 3A."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "Rectangular post / column",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "vertical member with multiple bolt holes along its inner face"
    }
  ],
  "measurements": [
    {
      "label": "1'-0\"",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "Rectangular post / column"
    }
  ],
  "notes": [
    "5-443A FACE",
    "AT EQ. SPs."
  ],
  "labels": [
    "540A"
  ],
  "description": "Detail crop showing a tall rectangular member (likely a post/column) with a row of circular holes along its inner face inside a larger outline. A 1'-0\" dimension is shown at the top; a callout labeled 540A appears near the bottom, with the vertical label 5-443A FACE AT EQ. SPs."
}