GDOT17

{
  "view": "Section",
  "objects": [
    {
      "name": "reinforcement bar",
      "tag": "3-443B",
      "shape": "circular",
      "material": "reinforcement steel",
      "count": 3,
      "note": "EA. FACE AT EQ. SPS."
    },
    {
      "name": "reinforcement bar",
      "tag": "5-443A",
      "shape": "circular",
      "material": "reinforcement steel",
      "count": 5,
      "note": "EA. FACE AT EQ. SPS."
    }
  ],
  "measurements": [
    {
      "label": "1'-0\"",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "width of section"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION F-F"
  ],
  "description": "Cross-section labeled SECTION F-F showing a rectangular concrete member with reinforcement bars on the face. The top width is 1'-0\". There are two bar groups: 3 bars of type 443B and 5 bars of type 443A placed at the faces at equal spacing."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "outer boundary frame",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "detail boundary (frame)"
    },
    {
      "name": "grid interior",
      "tag": "",
      "shape": "rectangular grid",
      "material": "",
      "count": 1,
      "note": "internal grid lines forming equal squares"
    },
    {
      "name": "notch recess",
      "tag": "",
      "shape": "notch",
      "material": "",
      "count": 1,
      "note": "re-entrant notch in lower interior area"
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "5'-4 3/4\"",
      "unit": "ft",
      "appliesTo": "outer boundary frame"
    }
  ],
  "notes": [],
  "labels": [
    "5-540A",
    "4-540B",
    "5-443A",
    "3-443B",
    "DETAIL 4"
  ],
  "description": "Detail view for Detail 4 showing a rectangular frame with an internal grid and a bottom-left notch. The overall width is 5'-4 3/4\". Callouts 5-540A, 4-540B, 5-443A, and 3-443B appear in the detail."
}

{
  "view": "Title Block",
  "objects": [
    {
      "name": "seal",
      "tag": "",
      "shape": "circular",
      "material": "seal/stamp",
      "count": 1,
      "note": "Georgia Registered Professional Engineer seal"
    },
    {
      "name": "revision block",
      "tag": "REVISIONS",
      "shape": "rectangular (vertical)",
      "material": "text/lines",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "DRAWING NO.",
      "value": "35-0016",
      "unit": "",
      "appliesTo": "title block"
    },
    {
      "label": "BRIDGE SHEET",
      "value": "16 OF 21",
      "unit": "",
      "appliesTo": "title block"
    },
    {
      "label": "SCALE",
      "value": "3/4\" = 1'-0\"",
      "unit": "",
      "appliesTo": "title block"
    },
    {
      "label": "DATE",
      "value": "MAY 2025",
      "unit": "",
      "appliesTo": "title block"
    },
    {
      "label": "FILE NAME",
      "value": "0019181_0016.dgn",
      "unit": "",
      "appliesTo": "title block"
    }
  ],
  "notes": [
    "1 INCH WHEN PRINTED FULL SIZE"
  ],
  "labels": [
    "GEORGIA DEPARTMENT OF TRANSPORTATION",
    "SASTRY & ASSOCIATES, INC.",
    "INTERMEDIATE BENT DETAILS",
    "SR 21 @ NS #620272Y",
    "JENKINS COUNTY",
    "DRAWING NO.",
    "BRIDGE SHEET 16 OF 21",
    "SCALE",
    "DATE",
    "FILE NAME"
  ],
  "description": "Crop shows the title block area of a Georgia DOT bridge sheet (Sheet 16 of 21). It includes the Georgia seal, a revision block, and the title-block information for the department and consulting firm, along with sheet details (drawing number 35-0016, 16 of 21, scale 3/4\"=1'-0\", May 2025)."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "diagonal reinforcement bars",
      "tag": "",
      "shape": "diagonal lines",
      "material": "reinforced steel",
      "count": 2,
      "note": "two bars crossing inside opening"
    },
    {
      "name": "boltholes / anchor bolt holes",
      "tag": "",
      "shape": "circular",
      "material": "concrete/steel",
      "count": 12,
      "note": "pattern around interior perimeter"
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "overall height",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "clearance all around",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "inner boundary opening"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION C-C"
  ],
  "description": "Section view (C-C) of a square 3'-6\" x 3'-6\" concrete element showing an inner opening with 2\" clearances on all sides, diagonal reinforcement within the opening, and a bolt-hole pattern (12 holes) around the interior perimeter."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "outer concrete enclosure",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner concrete pocket",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "perimeter anchor bolts",
      "tag": "",
      "shape": "circular",
      "material": "steel anchor bolts",
      "count": null,
      "note": "bolts around base and along sides"
    }
  ],
  "measurements": [
    {
      "label": "4'-0\" MIN.",
      "value": "4'-0\"",
      "unit": "ft",
      "appliesTo": "Left outer height"
    },
    {
      "label": "4'-3\"",
      "value": "4'-3\"",
      "unit": "ft",
      "appliesTo": "Overall top width"
    },
    {
      "label": "2'-1/2\"",
      "value": "2'-1/2\"",
      "unit": "ft",
      "appliesTo": "Top spacing left and right"
    },
    {
      "label": "1'-2\"",
      "value": "1'-2\"",
      "unit": "ft",
      "appliesTo": "Inner segment spacing"
    },
    {
      "label": "2\" MIN CL., TYP.",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "Clearance (typical)"
    },
    {
      "label": "2\" CL., 3 SIDES",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "Sides (perimeter clearance)"
    }
  ],
  "notes": [
    "Section A-A",
    "BRNG. callouts appear near left and right edges"
  ],
  "labels": [
    "SECTION A-A",
    "BRNG."
  ],
  "description": "This crop shows a Section A-A through a rectangular reinforced concrete enclosure with an interior pocket. It highlights a perimeter bolt pattern along the base, inner pocket geometry, and specified minimum clearances and dimensions that define the overall outline and assembly tolerances."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Footing",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "outer footing outline for Bent 3"
    },
    {
      "name": "Bent",
      "tag": "BENT 2",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "located at left side of footing"
    },
    {
      "name": "Bent",
      "tag": "BENT 3",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "located at right side of footing"
    },
    {
      "name": "Column",
      "tag": "",
      "shape": "circular",
      "material": "concrete",
      "count": 1,
      "note": "centerline/column location within footing"
    }
  ],
  "measurements": [
    {
      "label": "4'-3\"",
      "value": "4'-3\"",
      "unit": "",
      "appliesTo": "top width / overall plan width"
    },
    {
      "label": "2'-1/2\"",
      "value": "2'-1/2\"",
      "unit": "",
      "appliesTo": "dimension between features near top"
    },
    {
      "label": "1'-2\"",
      "value": "1'-2\"",
      "unit": "",
      "appliesTo": "dimension between features near top"
    },
    {
      "label": "4'-0\" MIN.",
      "value": "4'-0\" MIN.",
      "unit": "",
      "appliesTo": "minimum clearance"
    },
    {
      "label": "9\"",
      "value": "9\"",
      "unit": "",
      "appliesTo": "vertical dimension"
    },
    {
      "label": "13'-0\"",
      "value": "13'-0\"",
      "unit": "",
      "appliesTo": "overall plan width (Bent 3 footing)"
    },
    {
      "label": "5'-3\"",
      "value": "5'-3\"",
      "unit": "",
      "appliesTo": "segmented width inside plan"
    },
    {
      "label": "1'-3\"",
      "value": "1'-3\"",
      "unit": "",
      "appliesTo": "segment width ends"
    },
    {
      "label": "SCALE",
      "value": "3/8\" = 1'-0\"",
      "unit": "",
      "appliesTo": "Footing Plan - Bent 3"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION B-B",
    "FOOTING PLAN - BENT 3",
    "C COLUMN",
    "BENT 2",
    "BENT 3"
  ],
  "description": "Plan view of the footing for Bent 3 (Footing Plan - Bent 3) showing the outer footing outline, the location of Bent 2 and Bent 3, and the central column, with the associated dimensions and scale."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "Panel/grid panel",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "Post",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall width - left panel",
      "value": "3'-0 7/16\"",
      "unit": "in",
      "appliesTo": "Panel"
    },
    {
      "label": "Overall height - left panel",
      "value": "5'-4 1/4\"",
      "unit": "in",
      "appliesTo": "Panel"
    },
    {
      "label": "Post width",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "Post"
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL I",
    "SECTION A-A"
  ],
  "description": "Detail view showing a rectangular panel with a grid pattern on the left and a slender rectangular post with holes on the right; section A-A is shown and a Detail I callout is included for the connection."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "Rectangular deck/slab boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "outer boundary of slab with interior grid (plan view)"
    },
    {
      "name": "Reinforcement grid",
      "tag": "",
      "shape": "grid",
      "material": "reinforced concrete",
      "count": 1,
      "note": "interior grid lines"
    },
    {
      "name": "Section marker",
      "tag": "B",
      "shape": "section marker",
      "material": "",
      "count": 1,
      "note": "view B"
    },
    {
      "name": "Section marker",
      "tag": "C",
      "shape": "section marker",
      "material": "",
      "count": 1,
      "note": "view C"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "5' - 4 3/4\"",
      "unit": "",
      "appliesTo": "top dimension"
    },
    {
      "label": "Left bay length",
      "value": "5-5IOA",
      "unit": "",
      "appliesTo": "between left edge and first interior vertical line"
    },
    {
      "label": "Right bay length",
      "value": "4-5IOB",
      "unit": "",
      "appliesTo": "between first interior vertical line and right edge"
    },
    {
      "label": "Right edge height",
      "value": "13A",
      "unit": "",
      "appliesTo": "vertical dimension on right"
    }
  ],
  "notes": [],
  "labels": [],
  "description": "Plan view of a rectangular slab/deck with an interior reinforcement grid. Shows an overall width of 5' 4 3/4\", two interior bay dimensions labeled 5-510A and 4-510B, and a right-edge vertical dimension of 13A. Section markers B and C are present."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "plate, bolt-hole pattern",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": null,
      "note": ""
    },
    {
      "name": "block, bottom",
      "tag": "510A",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "width",
      "value": "1'-0\"",
      "unit": "ft-in",
      "appliesTo": "plate"
    }
  ],
  "notes": [],
  "labels": [],
  "description": "Detail view of a tall rectangular plate with a vertical pattern of bolt holes and a bottom attached block labeled 510A. The plate width is 1'-0\". The crop focuses on the bolt-hole pattern portion and its associated bottom element."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "Rectangular wall/panel feature with hole pattern",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": "row of circular holes along inner edge; part of Section C-C detail"
    }
  ],
  "measurements": [
    {
      "label": "width across top",
      "value": "1' - 0\"",
      "unit": "",
      "appliesTo": ""
    }
  ],
  "notes": [],
  "labels": [
    "SECTION C-C"
  ],
  "description": "Detail shows Section C-C with a tall rectangular element featuring a vertical line of holes and a double-wall section. The top width is labeled 1' - 0\"."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "reinforced concrete slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "outer boundary with internal reinforcement grid"
    },
    {
      "name": "reinforcement grid",
      "tag": "",
      "shape": "grid",
      "material": "steel reinforcement",
      "count": 1,
      "note": ""
    },
    {
      "name": "notch/recess",
      "tag": "",
      "shape": "L-shaped recess",
      "material": "reinforced concrete",
      "count": 1,
      "note": "lower-left interior notch"
    }
  ],
  "measurements": [
    {
      "label": "overall width",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": ""
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL 2"
  ],
  "description": "Detail 2 showing a reinforced concrete slab with an interior reinforcement grid. The top width is 5'-4 3/4\", and there is an L-shaped notch in the lower-left portion."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "PILE",
      "tag": "",
      "shape": "line",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "BENT 2",
      "tag": "",
      "shape": "rectangle",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "FOOTING",
      "tag": "",
      "shape": "rectangle",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "COLUMN",
      "tag": "",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "11'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "top width"
    },
    {
      "label": "1'-3\"",
      "value": "",
      "unit": "",
      "appliesTo": "top offset left"
    },
    {
      "label": "4'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "top interior segment 1"
    },
    {
      "label": "4'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "top interior segment 2"
    },
    {
      "label": "1'-3\"",
      "value": "",
      "unit": "",
      "appliesTo": "top offset right"
    },
    {
      "label": "11'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "left height"
    },
    {
      "label": "4'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "left subdivision 1"
    },
    {
      "label": "4'-6\"",
      "value": "",
      "unit": "",
      "appliesTo": "left subdivision 2"
    },
    {
      "label": "1'-3\"",
      "value": "",
      "unit": "",
      "appliesTo": "bottom left offset"
    },
    {
      "label": "SCALE: 3/8\" = 1'-0\"",
      "value": "",
      "unit": "",
      "appliesTo": "caption"
    }
  ],
  "notes": [],
  "labels": [
    "FOOTING PLAN - BENT 2",
    "SCALE: 3/8\" = 1' - 0\""
  ],
  "description": "Plan view of Bent 2 footing showing the footing outline, central column axis, and pile location; includes callouts and dimension lines on the top and left sides with overall dimensions and offsets."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "rectangular panel with grid",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "slender post with bolt holes",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "overall width (left panel)",
      "value": "3'-0 7/16\"",
      "unit": "",
      "appliesTo": "Panel"
    },
    {
      "label": "width of post",
      "value": "1'-0\"",
      "unit": "",
      "appliesTo": "Post"
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL 3",
    "SECTION D-D"
  ],
  "description": "Detail 3 view showing a rectangular panel with a grid pattern and a separate slender post with bolted holes, along with a section view labeled D-D."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "reinforced concrete panel with reinforcement grid",
      "tag": "",
      "shape": "rectangular with grid",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "panel width",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "reinforced concrete panel"
    }
  ],
  "notes": [
    "NO SCALE"
  ],
  "labels": [
    "5-540A",
    "4-540B"
  ],
  "description": "Plan view of a rectangular reinforced concrete panel with an internal reinforcement grid. The top dimension shows an overall width of 5'-4 3/4\". Callouts 5-540A and 4-540B appear above the panel area."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "Rectangular hollow post / box section",
      "tag": "",
      "shape": "rectangular hollow",
      "material": "",
      "count": 1,
      "note": "long slender member with bolt holes along inner face"
    },
    {
      "name": "Anchor block",
      "tag": "540A",
      "shape": "rectangular block",
      "material": "",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "width",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "Rectangular hollow post"
    }
  ],
  "notes": [],
  "labels": [
    "5-43A EA. FAS. AT Eq. SPS."
  ],
  "description": "Detail view showing a tall rectangular hollow member with a line of bolt holes along its inner face and an attached lower anchor block labeled 540A; a width of 1'-0\" is indicated at the top."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "reinforcement bars",
      "tag": "540B",
      "shape": "circular",
      "material": "reinforcing steel",
      "count": null,
      "note": "two vertical rows of rebars inside the rectangular section"
    }
  ],
  "measurements": [
    {
      "label": "width",
      "value": "1' - 0\"",
      "unit": "ft",
      "appliesTo": "Section F-F"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION F-F"
  ],
  "description": "Cross-section labeled SECTION F-F showing a tall rectangular member with an internal set of reinforcement bars arranged in two vertical rows. A width of 1'0\" is dimensioned at the top; the reinforcing bars are tagged 540B."
}

{
  "view": "Detail",
  "objects": [
    {
      "name": "slab outline",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": "outer boundary of detail; contains reinforcement grid"
    }
  ],
  "measurements": [
    {
      "label": "Top overall width",
      "value": "5'-4 3/4\"",
      "unit": "ft-in",
      "appliesTo": "slab outline"
    }
  ],
  "notes": [],
  "labels": [
    "DETAIL 4"
  ],
  "description": "Detail 4 drawing shows the plan of a reinforced concrete slab with an interior grid and a rectangular notch/recut along the bottom-left area. The view is a detail view (Detail 4) with E and F direction markers."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "outer boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "inner opening boundary",
      "tag": "",
      "shape": "rectangular",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "anchor bolts",
      "tag": "",
      "shape": "circular",
      "material": "steel",
      "count": null,
      "note": ""
    },
    {
      "name": "reinforcing bars",
      "tag": "",
      "shape": "diagonal",
      "material": "steel rebar",
      "count": null,
      "note": ""
    },
    {
      "name": "hole",
      "tag": "",
      "shape": "circular",
      "material": "concrete",
      "count": null,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "Overall height",
      "value": "3'-6\"",
      "unit": "ft-in",
      "appliesTo": "outer boundary"
    },
    {
      "label": "Clearance all around",
      "value": "2\"",
      "unit": "in",
      "appliesTo": "opening boundary to outer boundary"
    }
  ],
  "notes": [],
  "labels": [
    "SECTION C-C",
    "12-1121 OR 1131",
    "2\" CL. ALL SIDES",
    "620 OR 630",
    "621 OR 631"
  ],
  "description": "Detail view of a square opening with an inner boundary inset from the outer frame. The pattern shows anchor bolts around the inner edge with diagonal reinforcement bars between bolts and a circular hole location on the right. Dimensional callouts indicate a 3'-6\" width and height with 2\" clearance on all sides, and the section is labeled SECTION C-C."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "C BEAM 1",
      "tag": "C BEAM 1",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 2",
      "tag": "C BEAM 2",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 3",
      "tag": "C BEAM 3",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 4",
      "tag": "C BEAM 4",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 5",
      "tag": "C BEAM 5",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 6",
      "tag": "C BEAM 6",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 7",
      "tag": "C BEAM 7",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 8",
      "tag": "C BEAM 8",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 9",
      "tag": "C BEAM 9",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 10",
      "tag": "C BEAM 10",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 11",
      "tag": "C BEAM 11",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "C BEAM 12",
      "tag": "C BEAM 12",
      "shape": "line",
      "material": "concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "Spacing C BEAM 1 to C BEAM 2",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 1 to C BEAM 2"
    },
    {
      "label": "Spacing C BEAM 2 to C BEAM 3",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 2 to C BEAM 3"
    },
    {
      "label": "Spacing C BEAM 3 to C BEAM 4",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 3 to C BEAM 4"
    },
    {
      "label": "Spacing C BEAM 4 to C BEAM 5",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 4 to C BEAM 5"
    },
    {
      "label": "Spacing C BEAM 5 to C BEAM 6",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 5 to C BEAM 6"
    },
    {
      "label": "Spacing C BEAM 6 to C BEAM 7",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 6 to C BEAM 7"
    },
    {
      "label": "Spacing C BEAM 7 to C BEAM 8",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 7 to C BEAM 8"
    },
    {
      "label": "Spacing C BEAM 8 to C BEAM 9",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 8 to C BEAM 9"
    },
    {
      "label": "Spacing C BEAM 9 to C BEAM 10",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 9 to C BEAM 10"
    },
    {
      "label": "Spacing C BEAM 10 to C BEAM 11",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 10 to C BEAM 11"
    },
    {
      "label": "Spacing C BEAM 11 to C BEAM 12",
      "value": "7'-7 7/16\"",
      "unit": "ft/in",
      "appliesTo": "C BEAM 11 to C BEAM 12"
    }
  ],
  "notes": [
    "SEE DETAIL 3 BRIDGE SHEET 16",
    "FORM 3 DIA. X 12\" DEEP HOLE FOR 1/2\" DIA. SMOOTH DOWEL, TYP.",
    "SEE DETAIL 4 BRIDGE SHEET 16"
  ],
  "labels": [
    "PLAN (BENT 4 LEFT)",
    "PLAN (BENT 4 RIGHT)"
  ],
  "description": "Two plan views of Bent 4, left and right, showing concrete beams (C BEAM 1–12) along the deck. The plan includes beam spacings between adjacent beams and notes directing to detail drawings and dowel holes."
}

{
  "view": "Elevation",
  "objects": [
    {
      "name": "End Abutments",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "left and right ends in this crop"
    },
    {
      "name": "Pile",
      "tag": "2-445B",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "4-441",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 4,
      "note": "AT EQ. SPACES"
    },
    {
      "name": "Pile",
      "tag": "4-1040",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "2-442",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "2-445C",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Deck Slab",
      "tag": "",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 1,
      "note": ""
    }
  ],
  "measurements": [
    {
      "label": "EL. 189.42",
      "value": "189.42",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 189.50",
      "value": "189.50",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 186.04",
      "value": "186.04",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 185.93",
      "value": "185.93",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 185.80",
      "value": "185.80",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 185.67",
      "value": "185.67",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 185.53",
      "value": "185.53",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 185.37",
      "value": "185.37",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 188.71",
      "value": "188.71",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 188.67",
      "value": "188.67",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 184.04",
      "value": "184.04",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "EL. 183.25",
      "value": "183.25",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "Total length",
      "value": "44'-1 1/16\"",
      "unit": "ft",
      "appliesTo": ""
    },
    {
      "label": "First span",
      "value": "10\"",
      "unit": "in",
      "appliesTo": ""
    }
  ],
  "notes": [],
  "labels": [
    "Sheet page 17"
  ],
  "description": "Elevation view showing end abutments, multiple piles (2-445B; 4-441; 4-1040; 2-442; 2-445C), and the deck slab along a 44'-1 1/16\" length with piles spaced along the span."
}

{
  "view": "Profile",
  "objects": [
    {
      "name": "Pile",
      "tag": "2-445B",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "4-441",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 4,
      "note": "AT EQ SPACES"
    },
    {
      "name": "Pile",
      "tag": "2-445A",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": "TYP."
    },
    {
      "name": "Pile",
      "tag": "2-445C",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 2,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "4-1040",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 4,
      "note": ""
    },
    {
      "name": "Pile",
      "tag": "4-440",
      "shape": "rectangular",
      "material": "reinforced concrete",
      "count": 4,
      "note": "OVER EACH PILE"
    }
  ],
  "measurements": [
    {
      "label": "Left abutment to first pile",
      "value": "2'-10 1/8\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "Inter-pile spacing",
      "value": "7'-7/16\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "Inter-pile spacing",
      "value": "7'-7/16\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "Inter-pile spacing",
      "value": "7'-7/16\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "Inter-pile spacing",
      "value": "7'-7/16\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "Overall length",
      "value": "44'-1 1/16\"",
      "unit": "ft-in",
      "appliesTo": ""
    },
    {
      "label": "End segment",
      "value": "3'-3 5/8\"",
      "unit": "ft-in",
      "appliesTo": ""
    }
  ],
  "notes": [],
  "labels": [
    "Sheet page 17"
  ],
  "description": "Longitudinal profile of a pile-supported bridge showing abutments, piles and typical spacing along the deck. The crop includes multiple pile types (2-445B, 4-441, 2-445A, 2-445C, 4-1040) and spacing notes, with overall span and segment dimensions."
}

{
  "view": "Notes",
  "objects": [],
  "measurements": [
    {
      "label": "2\\\" clearance",
      "value": "2",
      "unit": "in",
      "appliesTo": "reinforcement"
    }
  ],
  "notes": [
    "NOTES:",
    "1. MAINTAIN 2\" CLEARANCE ON ALL REINFORCEMENT UNLESS OTHERWISE NOTED.",
    "2. SEE GA. STD. 9037 FOR DRAINAGE DETAILS AT END BENTS."
  ],
  "labels": [
    "NOTES"
  ],
  "description": "Crop shows the NOTES section of Sheet page 17 with two notes about reinforcement clearance and drainage details at end bents referencing GA Standard 9037."
}

{
  "view": "Plan",
  "objects": [
    {
      "name": "CAP",
      "tag": "",
      "shape": "rectangular with rounded left corners",
      "material": "concrete",
      "count": 1,
      "note": ""
    },
    {
      "name": "Reinforcement bars",
      "tag": "",
      "shape": "two vertical lines (round bars)",
      "material": "reinforcing steel",
      "count": 2,
      "note": "beneath cap"
    },
    {
      "name": "Wall segment",
      "tag": "",
      "shape": "rectangular vertical",
      "material": "concrete",
      "count": 1,
      "note": "front of wall callout on right"
    }
  ],
  "measurements": [
    {
      "label": "overall length (BFPR to far edge)",
      "value": "6'-0\"",
      "unit": "MIN.",
      "appliesTo": "CAP assembly"
    },
    {
      "label": "offset to cap left edge",
      "value": "3'-0\"",
      "unit": "",
      "appliesTo": "CAP left edge"
    },
    {
      "label": "cap height",
      "value": "2'-0\"",
      "unit": "MIN.",
      "appliesTo": "CAP"
    }
  ],
  "notes": [],
  "labels": [
    "B.F.P.R.",
    "FRONT OF WALL"
  ],
  "description": "Plan view showing a concrete cap (CAP) with reinforcing bars beneath, connected toward a wall segment on the right. Includes overall length, left offset, and cap height dimensions."
}

{
  "view": "Section",
  "objects": [
    {
      "name": "outer frame / boundary",
      "tag": "",
      "shape": "rounded rectangle",
      "material": "",
      "count": 1,
      "note": ""
    },
    {
      "name": "bolts or anchor holes",
      "tag": "",
      "shape": "circle",
      "material": "",
      "count": 4,
      "note": "at inner corners"
    },
    {
      "name": "top brace / bracket",
      "tag": "",
      "shape": "trapezoid",
      "material": "",
      "count": 1,
      "note": "top member labeled 2-442"
    },
    {
      "name": "centerline post / shaft",
      "tag": "",
      "shape": "rectangular column",
      "material": "",
      "count": 1,
      "note": "centerline axis"
    },
    {
      "name": "bottom legs (2)",
      "tag": "",
      "shape": "rectangular",
      "material": "",
      "count": 2,
      "note": "support for center post"
    },
    {
      "name": "inner recess / opening",
      "tag": "",
      "shape": "rectangle",
      "material": "",
      "count": 1,
      "note": "inner opening within outer frame"
    }
  ],
  "measurements": [
    {
      "label": "Overall width",
      "value": "3'-0\"",
      "unit": "ft-in",
      "appliesTo": "Outer frame width"
    },
    {
      "label": "Left/right half width (each)",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "From outer edge to centerline"
    },
    {
      "label": "Bottom left/right half width",
      "value": "1'-6\"",
      "unit": "ft-in",
      "appliesTo": "Bottom distance from centerline"
    },
    {
      "label": "Minimum vertical clearance",
      "value": "2'-0\"",
      "unit": "ft",
      "appliesTo": "Right side vertical clearance"
    },
    {
      "label": "Typical vertical spacing",
      "value": "1'-0\"",
      "unit": "ft",
      "appliesTo": "Vertical spacing inside section"
    }
  ],
  "notes": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\""
  ],
  "labels": [
    "SECTION A-A",
    "SCALE: 3/4\" = 1'-0\"",
    "3 SIDES",
    "2\" CL."
  ],
  "description": "Section A-A view of a rectangular frame with an interior centerline post and four corner bolts. The dimensions show a 3'-0\" overall width with 1'-6\" side segments and a downward central element; notes indicate a minimum centerline clearance and typical spacing."
}